| Message ID | 38bbbeb885f4d9ba466c43ab9b4d25190a3552fb.1623684253.git.michal.simek@xilinx.com |
|---|---|
| State | Not Applicable, archived |
| Headers | show |
| Series | arm64: zynqmp: Extend board description | expand |
| Context | Check | Description |
|---|---|---|
| robh/checkpatch | warning | total: 0 errors, 2 warnings, 29 lines checked |
| robh/dt-meta-schema | success | |
| robh/dtbs-check | success |
On Mon, 14 Jun 2021 17:25:38 +0200, Michal Simek wrote: > zcu102 rev1.1 compare to rev1.0 is using by default different DDR memory > which requires different configuration. The reason for adding this file to > Linux kernel is that U-Boot fdtfile variable is composed based on board > revision (in eeprom) and dtb file should exist in standard distibutions for > passing it to Linux kernel. > > Signed-off-by: Michal Simek <michal.simek@xilinx.com> > --- > > Changes in v2: None > > Documentation/devicetree/bindings/arm/xilinx.yaml | 1 + > arch/arm64/boot/dts/xilinx/Makefile | 1 + > .../boot/dts/xilinx/zynqmp-zcu102-rev1.1.dts | 15 +++++++++++++++ > 3 files changed, 17 insertions(+) > create mode 100644 arch/arm64/boot/dts/xilinx/zynqmp-zcu102-rev1.1.dts > Reviewed-by: Rob Herring <robh@kernel.org>
diff --git a/Documentation/devicetree/bindings/arm/xilinx.yaml b/Documentation/devicetree/bindings/arm/xilinx.yaml index f52c7e8ce654..a0b1ae6e3e71 100644 --- a/Documentation/devicetree/bindings/arm/xilinx.yaml +++ b/Documentation/devicetree/bindings/arm/xilinx.yaml @@ -87,6 +87,7 @@ properties: - xlnx,zynqmp-zcu102-revA - xlnx,zynqmp-zcu102-revB - xlnx,zynqmp-zcu102-rev1.0 + - xlnx,zynqmp-zcu102-rev1.1 - const: xlnx,zynqmp-zcu102 - const: xlnx,zynqmp diff --git a/arch/arm64/boot/dts/xilinx/Makefile b/arch/arm64/boot/dts/xilinx/Makefile index 11fb4fd3ebd4..083ed52337fd 100644 --- a/arch/arm64/boot/dts/xilinx/Makefile +++ b/arch/arm64/boot/dts/xilinx/Makefile @@ -12,6 +12,7 @@ dtb-$(CONFIG_ARCH_ZYNQMP) += zynqmp-zcu100-revC.dtb dtb-$(CONFIG_ARCH_ZYNQMP) += zynqmp-zcu102-revA.dtb dtb-$(CONFIG_ARCH_ZYNQMP) += zynqmp-zcu102-revB.dtb dtb-$(CONFIG_ARCH_ZYNQMP) += zynqmp-zcu102-rev1.0.dtb +dtb-$(CONFIG_ARCH_ZYNQMP) += zynqmp-zcu102-rev1.1.dtb dtb-$(CONFIG_ARCH_ZYNQMP) += zynqmp-zcu104-revA.dtb dtb-$(CONFIG_ARCH_ZYNQMP) += zynqmp-zcu104-revC.dtb dtb-$(CONFIG_ARCH_ZYNQMP) += zynqmp-zcu106-revA.dtb diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-zcu102-rev1.1.dts b/arch/arm64/boot/dts/xilinx/zynqmp-zcu102-rev1.1.dts new file mode 100644 index 000000000000..b6798394fcf4 --- /dev/null +++ b/arch/arm64/boot/dts/xilinx/zynqmp-zcu102-rev1.1.dts @@ -0,0 +1,15 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * dts file for Xilinx ZynqMP ZCU102 Rev1.1 + * + * (C) Copyright 2016 - 2020, Xilinx, Inc. + * + * Michal Simek <michal.simek@xilinx.com> + */ + +#include "zynqmp-zcu102-rev1.0.dts" + +/ { + model = "ZynqMP ZCU102 Rev1.1"; + compatible = "xlnx,zynqmp-zcu102-rev1.1", "xlnx,zynqmp-zcu102", "xlnx,zynqmp"; +};
zcu102 rev1.1 compare to rev1.0 is using by default different DDR memory which requires different configuration. The reason for adding this file to Linux kernel is that U-Boot fdtfile variable is composed based on board revision (in eeprom) and dtb file should exist in standard distibutions for passing it to Linux kernel. Signed-off-by: Michal Simek <michal.simek@xilinx.com> --- Changes in v2: None Documentation/devicetree/bindings/arm/xilinx.yaml | 1 + arch/arm64/boot/dts/xilinx/Makefile | 1 + .../boot/dts/xilinx/zynqmp-zcu102-rev1.1.dts | 15 +++++++++++++++ 3 files changed, 17 insertions(+) create mode 100644 arch/arm64/boot/dts/xilinx/zynqmp-zcu102-rev1.1.dts