diff mbox series

[22/22] dt-bindings: thermal: cleanup examples indentation

Message ID 20240614-dt-bindings-thermal-allof-v1-22-30b25a6ae24e@linaro.org
State Not Applicable
Headers show
Series dt-bindings: thermal: few cleanups | expand

Checks

Context Check Description
robh/checkpatch success
robh/patch-applied success
robh/dtbs-check warning build log
robh/dt-meta-schema success

Commit Message

Krzysztof Kozlowski June 14, 2024, 9:46 a.m. UTC
Preferred indentation for DTS examples in the bindings is 4-space.  It
is also preferred not to have redundant/unused labels. No functional
change

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
 .../bindings/thermal/amlogic,thermal.yaml          | 18 ++---
 .../bindings/thermal/brcm,avs-ro-thermal.yaml      | 16 ++--
 .../devicetree/bindings/thermal/brcm,avs-tmon.yaml | 16 ++--
 .../devicetree/bindings/thermal/qcom-tsens.yaml    | 88 ++++++++++------------
 .../bindings/thermal/rcar-gen3-thermal.yaml        | 64 ++++++++--------
 .../devicetree/bindings/thermal/rcar-thermal.yaml  | 60 +++++++--------
 .../devicetree/bindings/thermal/rzg2l-thermal.yaml | 36 ++++-----
 .../devicetree/bindings/thermal/sprd-thermal.yaml  | 42 +++++------
 .../bindings/thermal/ti,am654-thermal.yaml         | 10 +--
 9 files changed, 172 insertions(+), 178 deletions(-)
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/thermal/amlogic,thermal.yaml b/Documentation/devicetree/bindings/thermal/amlogic,thermal.yaml
index e52fc40e215d..725303e1a364 100644
--- a/Documentation/devicetree/bindings/thermal/amlogic,thermal.yaml
+++ b/Documentation/devicetree/bindings/thermal/amlogic,thermal.yaml
@@ -50,13 +50,13 @@  unevaluatedProperties: false
 
 examples:
   - |
-        cpu_temp: temperature-sensor@ff634800 {
-                compatible = "amlogic,g12a-cpu-thermal",
-                             "amlogic,g12a-thermal";
-                reg = <0xff634800 0x50>;
-                interrupts = <0x0 0x24 0x0>;
-                clocks = <&clk 164>;
-                #thermal-sensor-cells = <0>;
-                amlogic,ao-secure = <&sec_AO>;
-        };
+    temperature-sensor@ff634800 {
+        compatible = "amlogic,g12a-cpu-thermal",
+                     "amlogic,g12a-thermal";
+        reg = <0xff634800 0x50>;
+        interrupts = <0x0 0x24 0x0>;
+        clocks = <&clk 164>;
+        #thermal-sensor-cells = <0>;
+        amlogic,ao-secure = <&sec_AO>;
+    };
 ...
diff --git a/Documentation/devicetree/bindings/thermal/brcm,avs-ro-thermal.yaml b/Documentation/devicetree/bindings/thermal/brcm,avs-ro-thermal.yaml
index 0271a0bc1843..29a9844e8b48 100644
--- a/Documentation/devicetree/bindings/thermal/brcm,avs-ro-thermal.yaml
+++ b/Documentation/devicetree/bindings/thermal/brcm,avs-ro-thermal.yaml
@@ -35,14 +35,14 @@  unevaluatedProperties: false
 
 examples:
   - |
-        avs-monitor@7d5d2000 {
-                compatible = "brcm,bcm2711-avs-monitor",
-                             "syscon", "simple-mfd";
-                reg = <0x7d5d2000 0xf00>;
+    avs-monitor@7d5d2000 {
+        compatible = "brcm,bcm2711-avs-monitor",
+                     "syscon", "simple-mfd";
+        reg = <0x7d5d2000 0xf00>;
 
-                thermal: thermal {
-                        compatible = "brcm,bcm2711-thermal";
-                        #thermal-sensor-cells = <0>;
-                };
+        thermal: thermal {
+            compatible = "brcm,bcm2711-thermal";
+            #thermal-sensor-cells = <0>;
         };
+    };
 ...
diff --git a/Documentation/devicetree/bindings/thermal/brcm,avs-tmon.yaml b/Documentation/devicetree/bindings/thermal/brcm,avs-tmon.yaml
index 32730211e15b..081486b44382 100644
--- a/Documentation/devicetree/bindings/thermal/brcm,avs-tmon.yaml
+++ b/Documentation/devicetree/bindings/thermal/brcm,avs-tmon.yaml
@@ -45,11 +45,11 @@  required:
 
 examples:
   - |
-     thermal@f04d1500 {
-          compatible = "brcm,avs-tmon-bcm7445", "brcm,avs-tmon";
-          reg = <0xf04d1500 0x28>;
-          interrupts = <0x6>;
-          interrupt-names = "tmon";
-          interrupt-parent = <&avs_host_l2_intc>;
-          #thermal-sensor-cells = <0>;
-     };
+    thermal@f04d1500 {
+        compatible = "brcm,avs-tmon-bcm7445", "brcm,avs-tmon";
+        reg = <0xf04d1500 0x28>;
+        interrupts = <0x6>;
+        interrupt-names = "tmon";
+        interrupt-parent = <&avs_host_l2_intc>;
+        #thermal-sensor-cells = <0>;
+    };
diff --git a/Documentation/devicetree/bindings/thermal/qcom-tsens.yaml b/Documentation/devicetree/bindings/thermal/qcom-tsens.yaml
index cce6624228c7..01f9f45b94c2 100644
--- a/Documentation/devicetree/bindings/thermal/qcom-tsens.yaml
+++ b/Documentation/devicetree/bindings/thermal/qcom-tsens.yaml
@@ -295,22 +295,16 @@  unevaluatedProperties: false
 examples:
   - |
     #include <dt-bindings/interrupt-controller/arm-gic.h>
-    // Example msm9860 based SoC (ipq8064):
-    gcc: clock-controller {
+    thermal-sensor {
+        compatible = "qcom,ipq8064-tsens";
 
-           /* ... */
+        nvmem-cells = <&tsens_calib>, <&tsens_calib_backup>;
+        nvmem-cell-names = "calib", "calib_backup";
+        interrupts = <GIC_SPI 178 IRQ_TYPE_LEVEL_HIGH>;
+        interrupt-names = "uplow";
 
-           tsens: thermal-sensor {
-                compatible = "qcom,ipq8064-tsens";
-
-                 nvmem-cells = <&tsens_calib>, <&tsens_calib_backup>;
-                 nvmem-cell-names = "calib", "calib_backup";
-                 interrupts = <GIC_SPI 178 IRQ_TYPE_LEVEL_HIGH>;
-                 interrupt-names = "uplow";
-
-                 #qcom,sensors = <11>;
-                 #thermal-sensor-cells = <1>;
-          };
+        #qcom,sensors = <11>;
+        #thermal-sensor-cells = <1>;
     };
 
   - |
@@ -347,66 +341,66 @@  examples:
     #include <dt-bindings/interrupt-controller/arm-gic.h>
     // Example 1 (legacy: for pre v1 IP):
     tsens1: thermal-sensor@4a9000 {
-           compatible = "qcom,msm8916-tsens", "qcom,tsens-v0_1";
-           reg = <0x4a9000 0x1000>, /* TM */
-                 <0x4a8000 0x1000>; /* SROT */
+        compatible = "qcom,msm8916-tsens", "qcom,tsens-v0_1";
+        reg = <0x4a9000 0x1000>, /* TM */
+              <0x4a8000 0x1000>; /* SROT */
 
-           nvmem-cells = <&tsens_caldata>, <&tsens_calsel>;
-           nvmem-cell-names = "calib", "calib_sel";
+        nvmem-cells = <&tsens_caldata>, <&tsens_calsel>;
+        nvmem-cell-names = "calib", "calib_sel";
 
-           interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>;
-           interrupt-names = "uplow";
+        interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>;
+        interrupt-names = "uplow";
 
-           #qcom,sensors = <5>;
-           #thermal-sensor-cells = <1>;
+        #qcom,sensors = <5>;
+        #thermal-sensor-cells = <1>;
     };
 
   - |
     #include <dt-bindings/interrupt-controller/arm-gic.h>
     // Example 2 (for any platform containing v1 of the TSENS IP):
     tsens2: thermal-sensor@4a9000 {
-          compatible = "qcom,qcs404-tsens", "qcom,tsens-v1";
-          reg = <0x004a9000 0x1000>, /* TM */
-                <0x004a8000 0x1000>; /* SROT */
+        compatible = "qcom,qcs404-tsens", "qcom,tsens-v1";
+        reg = <0x004a9000 0x1000>, /* TM */
+              <0x004a8000 0x1000>; /* SROT */
 
-          nvmem-cells = <&tsens_caldata>;
-          nvmem-cell-names = "calib";
+        nvmem-cells = <&tsens_caldata>;
+        nvmem-cell-names = "calib";
 
-          interrupts = <GIC_SPI 506 IRQ_TYPE_LEVEL_HIGH>;
-          interrupt-names = "uplow";
+        interrupts = <GIC_SPI 506 IRQ_TYPE_LEVEL_HIGH>;
+        interrupt-names = "uplow";
 
-          #qcom,sensors = <10>;
-          #thermal-sensor-cells = <1>;
+        #qcom,sensors = <10>;
+        #thermal-sensor-cells = <1>;
     };
 
   - |
     #include <dt-bindings/interrupt-controller/arm-gic.h>
     // Example 3 (for any platform containing v2 of the TSENS IP):
     tsens3: thermal-sensor@c263000 {
-           compatible = "qcom,sdm845-tsens", "qcom,tsens-v2";
-           reg = <0xc263000 0x1ff>,
-                 <0xc222000 0x1ff>;
+        compatible = "qcom,sdm845-tsens", "qcom,tsens-v2";
+        reg = <0xc263000 0x1ff>,
+              <0xc222000 0x1ff>;
 
-           interrupts = <GIC_SPI 506 IRQ_TYPE_LEVEL_HIGH>,
-                        <GIC_SPI 508 IRQ_TYPE_LEVEL_HIGH>;
-           interrupt-names = "uplow", "critical";
+        interrupts = <GIC_SPI 506 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 508 IRQ_TYPE_LEVEL_HIGH>;
+        interrupt-names = "uplow", "critical";
 
-           #qcom,sensors = <13>;
-           #thermal-sensor-cells = <1>;
+        #qcom,sensors = <13>;
+        #thermal-sensor-cells = <1>;
     };
 
   - |
     #include <dt-bindings/interrupt-controller/arm-gic.h>
     // Example 4 (for any IPQ8074 based SoC-s):
     tsens4: thermal-sensor@4a9000 {
-           compatible = "qcom,ipq8074-tsens";
-           reg = <0x4a9000 0x1000>,
-                 <0x4a8000 0x1000>;
+        compatible = "qcom,ipq8074-tsens";
+        reg = <0x4a9000 0x1000>,
+              <0x4a8000 0x1000>;
 
-           interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>;
-           interrupt-names = "combined";
+        interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>;
+        interrupt-names = "combined";
 
-           #qcom,sensors = <16>;
-           #thermal-sensor-cells = <1>;
+        #qcom,sensors = <16>;
+        #thermal-sensor-cells = <1>;
     };
 ...
diff --git a/Documentation/devicetree/bindings/thermal/rcar-gen3-thermal.yaml b/Documentation/devicetree/bindings/thermal/rcar-gen3-thermal.yaml
index d92e882c9e8d..b6657d64cf3d 100644
--- a/Documentation/devicetree/bindings/thermal/rcar-gen3-thermal.yaml
+++ b/Documentation/devicetree/bindings/thermal/rcar-gen3-thermal.yaml
@@ -106,33 +106,33 @@  examples:
     #include <dt-bindings/power/r8a7795-sysc.h>
 
     tsc: thermal@e6198000 {
-            compatible = "renesas,r8a7795-thermal";
-            reg = <0xe6198000 0x100>,
-                  <0xe61a0000 0x100>,
-                  <0xe61a8000 0x100>;
-            interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>,
-                         <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>,
-                         <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
-            clocks = <&cpg CPG_MOD 522>;
-            power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
-            resets = <&cpg 522>;
-            #thermal-sensor-cells = <1>;
+        compatible = "renesas,r8a7795-thermal";
+        reg = <0xe6198000 0x100>,
+              <0xe61a0000 0x100>,
+              <0xe61a8000 0x100>;
+        interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
+        clocks = <&cpg CPG_MOD 522>;
+        power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+        resets = <&cpg 522>;
+        #thermal-sensor-cells = <1>;
     };
 
     thermal-zones {
-            sensor_thermal: sensor-thermal {
-                    polling-delay-passive = <250>;
-                    polling-delay = <1000>;
-                    thermal-sensors = <&tsc 0>;
+        sensor_thermal: sensor-thermal {
+            polling-delay-passive = <250>;
+            polling-delay = <1000>;
+            thermal-sensors = <&tsc 0>;
 
-                    trips {
-                            sensor1_crit: sensor1-crit {
-                                    temperature = <90000>;
-                                    hysteresis = <2000>;
-                                    type = "critical";
-                            };
-                    };
+            trips {
+                sensor1_crit: sensor1-crit {
+                    temperature = <90000>;
+                    hysteresis = <2000>;
+                    type = "critical";
+                };
             };
+        };
     };
   - |
     #include <dt-bindings/clock/r8a779a0-cpg-mssr.h>
@@ -140,14 +140,14 @@  examples:
     #include <dt-bindings/power/r8a779a0-sysc.h>
 
     tsc_r8a779a0: thermal@e6190000 {
-            compatible = "renesas,r8a779a0-thermal";
-            reg = <0xe6190000 0x200>,
-                  <0xe6198000 0x200>,
-                  <0xe61a0000 0x200>,
-                  <0xe61a8000 0x200>,
-                  <0xe61b0000 0x200>;
-            clocks = <&cpg CPG_MOD 919>;
-            power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>;
-            resets = <&cpg 919>;
-            #thermal-sensor-cells = <1>;
+        compatible = "renesas,r8a779a0-thermal";
+        reg = <0xe6190000 0x200>,
+              <0xe6198000 0x200>,
+              <0xe61a0000 0x200>,
+              <0xe61a8000 0x200>,
+              <0xe61b0000 0x200>;
+        clocks = <&cpg CPG_MOD 919>;
+        power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>;
+        resets = <&cpg 919>;
+        #thermal-sensor-cells = <1>;
     };
diff --git a/Documentation/devicetree/bindings/thermal/rcar-thermal.yaml b/Documentation/devicetree/bindings/thermal/rcar-thermal.yaml
index 119998d10ff4..221a58d18cad 100644
--- a/Documentation/devicetree/bindings/thermal/rcar-thermal.yaml
+++ b/Documentation/devicetree/bindings/thermal/rcar-thermal.yaml
@@ -98,8 +98,8 @@  examples:
   # Example (non interrupt support)
   - |
     thermal@ffc48000 {
-            compatible = "renesas,thermal-r8a7779", "renesas,rcar-thermal";
-            reg = <0xffc48000 0x38>;
+        compatible = "renesas,thermal-r8a7779", "renesas,rcar-thermal";
+        reg = <0xffc48000 0x38>;
     };
 
   # Example (interrupt support)
@@ -109,12 +109,12 @@  examples:
     #include <dt-bindings/interrupt-controller/irq.h>
 
     thermal@e61f0000 {
-            compatible = "renesas,thermal-r8a73a4", "renesas,rcar-thermal";
-            reg = <0xe61f0000 0x14>, <0xe61f0100 0x38>,
-                  <0xe61f0200 0x38>, <0xe61f0300 0x38>;
-            interrupts = <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
-            clocks = <&mstp5_clks R8A73A4_CLK_THERMAL>;
-            power-domains = <&pd_c5>;
+        compatible = "renesas,thermal-r8a73a4", "renesas,rcar-thermal";
+        reg = <0xe61f0000 0x14>, <0xe61f0100 0x38>,
+              <0xe61f0200 0x38>, <0xe61f0300 0x38>;
+        interrupts = <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
+        clocks = <&mstp5_clks R8A73A4_CLK_THERMAL>;
+        power-domains = <&pd_c5>;
     };
 
   # Example (with thermal-zone)
@@ -124,32 +124,32 @@  examples:
     #include <dt-bindings/power/r8a7790-sysc.h>
 
     thermal: thermal@e61f0000 {
-      compatible = "renesas,thermal-r8a7790",
-                   "renesas,rcar-gen2-thermal",
-                   "renesas,rcar-thermal";
-            reg = <0xe61f0000 0x10>, <0xe61f0100 0x38>;
-            interrupts = <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
-            clocks = <&cpg CPG_MOD 522>;
-            power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
-            resets = <&cpg 522>;
-            #thermal-sensor-cells = <0>;
+        compatible = "renesas,thermal-r8a7790",
+                     "renesas,rcar-gen2-thermal",
+                     "renesas,rcar-thermal";
+        reg = <0xe61f0000 0x10>, <0xe61f0100 0x38>;
+        interrupts = <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
+        clocks = <&cpg CPG_MOD 522>;
+        power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
+        resets = <&cpg 522>;
+        #thermal-sensor-cells = <0>;
     };
 
     thermal-zones {
-            cpu_thermal: cpu-thermal {
-                    polling-delay-passive = <1000>;
-                    polling-delay = <5000>;
+        cpu_thermal: cpu-thermal {
+            polling-delay-passive = <1000>;
+            polling-delay = <5000>;
 
-                    thermal-sensors = <&thermal>;
+            thermal-sensors = <&thermal>;
 
-                    trips {
-                            cpu-crit {
-                                    temperature = <115000>;
-                                    hysteresis = <0>;
-                                    type = "critical";
-                            };
-                    };
-                    cooling-maps {
-                    };
+            trips {
+                cpu-crit {
+                    temperature = <115000>;
+                    hysteresis = <0>;
+                    type = "critical";
+                };
             };
+            cooling-maps {
+            };
+        };
     };
diff --git a/Documentation/devicetree/bindings/thermal/rzg2l-thermal.yaml b/Documentation/devicetree/bindings/thermal/rzg2l-thermal.yaml
index 2f96c0fe0f75..136589f5adee 100644
--- a/Documentation/devicetree/bindings/thermal/rzg2l-thermal.yaml
+++ b/Documentation/devicetree/bindings/thermal/rzg2l-thermal.yaml
@@ -53,27 +53,27 @@  examples:
     #include <dt-bindings/clock/r9a07g044-cpg.h>
 
     tsu: thermal@10059400 {
-            compatible = "renesas,r9a07g044-tsu",
-                         "renesas,rzg2l-tsu";
-            reg = <0x10059400 0x400>;
-            clocks = <&cpg CPG_MOD R9A07G044_TSU_PCLK>;
-            resets = <&cpg R9A07G044_TSU_PRESETN>;
-            power-domains = <&cpg>;
-            #thermal-sensor-cells = <1>;
+        compatible = "renesas,r9a07g044-tsu",
+                     "renesas,rzg2l-tsu";
+        reg = <0x10059400 0x400>;
+        clocks = <&cpg CPG_MOD R9A07G044_TSU_PCLK>;
+        resets = <&cpg R9A07G044_TSU_PRESETN>;
+        power-domains = <&cpg>;
+        #thermal-sensor-cells = <1>;
     };
 
     thermal-zones {
-            cpu-thermal {
-                    polling-delay-passive = <250>;
-                    polling-delay = <1000>;
-                    thermal-sensors = <&tsu 0>;
+        cpu-thermal {
+            polling-delay-passive = <250>;
+            polling-delay = <1000>;
+            thermal-sensors = <&tsu 0>;
 
-                    trips {
-                            sensor_crit: sensor-crit {
-                                    temperature = <125000>;
-                                    hysteresis = <1000>;
-                                    type = "critical";
-                            };
-                    };
+            trips {
+                sensor_crit: sensor-crit {
+                    temperature = <125000>;
+                    hysteresis = <1000>;
+                    type = "critical";
+                };
             };
+        };
     };
diff --git a/Documentation/devicetree/bindings/thermal/sprd-thermal.yaml b/Documentation/devicetree/bindings/thermal/sprd-thermal.yaml
index f65076fc68f9..afa551f6185f 100644
--- a/Documentation/devicetree/bindings/thermal/sprd-thermal.yaml
+++ b/Documentation/devicetree/bindings/thermal/sprd-thermal.yaml
@@ -86,27 +86,27 @@  unevaluatedProperties: false
 
 examples:
   - |
-        ap_thm0: thermal@32200000 {
-                compatible = "sprd,ums512-thermal";
-                reg = <0x32200000 0x10000>;
-                clock-names = "enable";
-                clocks = <&aonapb_gate 32>;
-                #thermal-sensor-cells = <1>;
-                nvmem-cells = <&thm0_sign>, <&thm0_ratio>;
-                nvmem-cell-names = "thm_sign_cal", "thm_ratio_cal";
-                #address-cells = <1>;
-                #size-cells = <0>;
+    thermal@32200000 {
+        compatible = "sprd,ums512-thermal";
+        reg = <0x32200000 0x10000>;
+        clock-names = "enable";
+        clocks = <&aonapb_gate 32>;
+        #thermal-sensor-cells = <1>;
+        nvmem-cells = <&thm0_sign>, <&thm0_ratio>;
+        nvmem-cell-names = "thm_sign_cal", "thm_ratio_cal";
+        #address-cells = <1>;
+        #size-cells = <0>;
 
-                prometheus-sensor@0 {
-                        reg = <0>;
-                        nvmem-cells = <&thm0_sen0>;
-                        nvmem-cell-names = "sen_delta_cal";
-                };
-
-                ank-sensor@1 {
-                        reg = <1>;
-                        nvmem-cells = <&thm0_sen1>;
-                        nvmem-cell-names = "sen_delta_cal";
-                };
+        prometheus-sensor@0 {
+            reg = <0>;
+            nvmem-cells = <&thm0_sen0>;
+            nvmem-cell-names = "sen_delta_cal";
         };
+
+        ank-sensor@1 {
+            reg = <1>;
+            nvmem-cells = <&thm0_sen1>;
+            nvmem-cell-names = "sen_delta_cal";
+        };
+    };
 ...
diff --git a/Documentation/devicetree/bindings/thermal/ti,am654-thermal.yaml b/Documentation/devicetree/bindings/thermal/ti,am654-thermal.yaml
index 16801aa78bc2..c123d9070525 100644
--- a/Documentation/devicetree/bindings/thermal/ti,am654-thermal.yaml
+++ b/Documentation/devicetree/bindings/thermal/ti,am654-thermal.yaml
@@ -47,11 +47,11 @@  examples:
         thermal-sensors = <&vtm0 0>;
 
         trips {
-                mpu0_crit: mpu0_crit {
-                        temperature = <125000>; /* milliCelsius */
-                        hysteresis = <2000>; /* milliCelsius */
-                        type = "critical";
-                };
+            mpu0_crit: mpu0_crit {
+                temperature = <125000>; /* milliCelsius */
+                hysteresis = <2000>; /* milliCelsius */
+                type = "critical";
+            };
         };
     };
 ...