| Message ID | 20240527-topic-sm8x50-upstream-phy-combo-typec-mux-v2-1-a03e68d7b8fc@linaro.org |
|---|---|
| State | Not Applicable |
| Headers | show |
| Series | arm64: qcom: allow up to 4 lanes for the Type-C DisplayPort Altmode | expand |
| Context | Check | Description |
|---|---|---|
| robh/checkpatch | success | |
| robh/patch-applied | success | |
| robh/dtbs-check | warning | build log |
| robh/dt-meta-schema | success |
On 27/05/2024 10:42, Neil Armstrong wrote: > The QMP USB3/DP Combo PHY can work in 3 modes: > - DisplayPort Only > - USB3 Only > - USB3 + DisplayPort Combo mode > > In order to switch between those modes, the PHY needs to receive > Type-C events, allow marking to the phy with the mode-switch > property in order to allow the PHY to Type-C events. > > Reference usb-switch.yaml as a simpler way to allow the mode-switch > property instead of duplicating the property definition. > > Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> > --- Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org> Best regards, Krzysztof
diff --git a/Documentation/devicetree/bindings/phy/qcom,sc8280xp-qmp-usb43dp-phy.yaml b/Documentation/devicetree/bindings/phy/qcom,sc8280xp-qmp-usb43dp-phy.yaml index 2d0d7e9e6431..5358d3a6fde3 100644 --- a/Documentation/devicetree/bindings/phy/qcom,sc8280xp-qmp-usb43dp-phy.yaml +++ b/Documentation/devicetree/bindings/phy/qcom,sc8280xp-qmp-usb43dp-phy.yaml @@ -71,10 +71,8 @@ properties: description: See include/dt-bindings/phy/phy-qcom-qmp.h - orientation-switch: - description: - Flag the PHY as possible handler of USB Type-C orientation switching - type: boolean + mode-switch: true + orientation-switch: true ports: $ref: /schemas/graph.yaml#/properties/ports @@ -104,6 +102,7 @@ required: - "#phy-cells" allOf: + - $ref: /schemas/usb/usb-switch.yaml# - if: properties: compatible:
The QMP USB3/DP Combo PHY can work in 3 modes: - DisplayPort Only - USB3 Only - USB3 + DisplayPort Combo mode In order to switch between those modes, the PHY needs to receive Type-C events, allow marking to the phy with the mode-switch property in order to allow the PHY to Type-C events. Reference usb-switch.yaml as a simpler way to allow the mode-switch property instead of duplicating the property definition. Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> --- .../devicetree/bindings/phy/qcom,sc8280xp-qmp-usb43dp-phy.yaml | 7 +++---- 1 file changed, 3 insertions(+), 4 deletions(-)