| Message ID | 20240526184526.21010-1-ansuelsmth@gmail.com |
|---|---|
| State | Superseded |
| Headers | show |
| Series | [v2,1/3] dt-bindings: hwmon: g762: Convert to yaml schema | expand |
| Context | Check | Description |
|---|---|---|
| robh/checkpatch | warning | total: 0 errors, 2 warnings, 83 lines checked |
| robh/patch-applied | success | |
| robh/dtbs-check | warning | build log |
| robh/dt-meta-schema | success |
On Sun, May 26, 2024 at 08:45:23PM +0200, Christian Marangi wrote: > Convert g762 Documentation to yaml schema. > > Since it supports various device, change the name to g76x and add the > vendor prefix. The file name should not change. This document does not cover g76[0,4-9], after all. Guenter > > Signed-off-by: Christian Marangi <ansuelsmth@gmail.com> > --- > .../devicetree/bindings/hwmon/g762.txt | 47 ----------- > .../devicetree/bindings/hwmon/gmt,g76x.yaml | 83 +++++++++++++++++++ > 2 files changed, 83 insertions(+), 47 deletions(-) > delete mode 100644 Documentation/devicetree/bindings/hwmon/g762.txt > create mode 100644 Documentation/devicetree/bindings/hwmon/gmt,g76x.yaml > > diff --git a/Documentation/devicetree/bindings/hwmon/g762.txt b/Documentation/devicetree/bindings/hwmon/g762.txt > deleted file mode 100644 > index 6d154c4923de..000000000000 > --- a/Documentation/devicetree/bindings/hwmon/g762.txt > +++ /dev/null > @@ -1,47 +0,0 @@ > -GMT G762/G763 PWM Fan controller > - > -Required node properties: > - > - - "compatible": must be either "gmt,g762" or "gmt,g763" > - - "reg": I2C bus address of the device > - - "clocks": a fixed clock providing input clock frequency > - on CLK pin of the chip. > - > -Optional properties: > - > - - "fan_startv": fan startup voltage. Accepted values are 0, 1, 2 and 3. > - The higher the more. > - > - - "pwm_polarity": pwm polarity. Accepted values are 0 (positive duty) > - and 1 (negative duty). > - > - - "fan_gear_mode": fan gear mode. Supported values are 0, 1 and 2. > - > -If an optional property is not set in .dts file, then current value is kept > -unmodified (e.g. u-boot installed value). > - > -Additional information on operational parameters for the device is available > -in Documentation/hwmon/g762.rst. A detailed datasheet for the device is available > -at http://natisbad.org/NAS/refs/GMT_EDS-762_763-080710-0.2.pdf. > - > -Example g762 node: > - > - clocks { > - #address-cells = <1>; > - #size-cells = <0>; > - > - g762_clk: fixedclk { > - compatible = "fixed-clock"; > - #clock-cells = <0>; > - clock-frequency = <8192>; > - } > - } > - > - g762: g762@3e { > - compatible = "gmt,g762"; > - reg = <0x3e>; > - clocks = <&g762_clk> > - fan_gear_mode = <0>; /* chip default */ > - fan_startv = <1>; /* chip default */ > - pwm_polarity = <0>; /* chip default */ > - }; > diff --git a/Documentation/devicetree/bindings/hwmon/gmt,g76x.yaml b/Documentation/devicetree/bindings/hwmon/gmt,g76x.yaml > new file mode 100644 > index 000000000000..bfefe49f54bf > --- /dev/null > +++ b/Documentation/devicetree/bindings/hwmon/gmt,g76x.yaml > @@ -0,0 +1,83 @@ > +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause > +%YAML 1.2 > +--- > +$id: http://devicetree.org/schemas/hwmon/gmt,g76x.yaml# > +$schema: http://devicetree.org/meta-schemas/core.yaml# > + > +title: GMT G762/G763 PWM Fan controller > + > +maintainers: > + - Christian Marangi <ansuelsmth@gmail.com> > + > +description: | > + GMT G762/G763 PWM Fan controller. > + > + If an optional property is not set in DT, then current value is kept > + unmodified (e.g. bootloader installed value). > + > + Additional information on operational parameters for the device is available > + in Documentation/hwmon/g762.rst. A detailed datasheet for the device is available > + at http://natisbad.org/NAS/refs/GMT_EDS-762_763-080710-0.2.pdf. > + > +properties: > + compatible: > + enum: > + - gmt,g762 > + - gmt,g763 > + > + reg: > + maxItems: 1 > + > + clocks: > + description: a fixed clock providing input clock frequency on CLK > + pin of the chip. > + maxItems: 1 > + > + fan_startv: > + description: Fan startup voltage step > + $ref: /schemas/types.yaml#/definitions/uint32 > + enum: [0, 1, 2, 3] > + > + pwm_polarity: > + description: PWM polarity (psotivie or negative duty) > + $ref: /schemas/types.yaml#/definitions/uint32 > + enum: [0, 1] > + > + fan_gear_mode: > + description: FAN gear mode. Configure High speed fan setting factor > + $ref: /schemas/types.yaml#/definitions/uint32 > + enum: [0, 1, 2] > + > +required: > + - compatible > + - reg > + - clocks > + > +additionalProperties: false > + > +examples: > + - | > + clocks { > + #address-cells = <1>; > + #size-cells = <0>; > + > + g762_clk: fixedclk { > + compatible = "fixed-clock"; > + #clock-cells = <0>; > + clock-frequency = <8192>; > + }; > + }; > + > + i2c { > + #address-cells = <1>; > + #size-cells = <0>; > + > + g762@3e { > + compatible = "gmt,g762"; > + reg = <0x3e>; > + clocks = <&g762_clk>; > + fan_gear_mode = <0>; > + fan_startv = <1>; > + pwm_polarity = <0>; > + }; > + };
diff --git a/Documentation/devicetree/bindings/hwmon/g762.txt b/Documentation/devicetree/bindings/hwmon/g762.txt deleted file mode 100644 index 6d154c4923de..000000000000 --- a/Documentation/devicetree/bindings/hwmon/g762.txt +++ /dev/null @@ -1,47 +0,0 @@ -GMT G762/G763 PWM Fan controller - -Required node properties: - - - "compatible": must be either "gmt,g762" or "gmt,g763" - - "reg": I2C bus address of the device - - "clocks": a fixed clock providing input clock frequency - on CLK pin of the chip. - -Optional properties: - - - "fan_startv": fan startup voltage. Accepted values are 0, 1, 2 and 3. - The higher the more. - - - "pwm_polarity": pwm polarity. Accepted values are 0 (positive duty) - and 1 (negative duty). - - - "fan_gear_mode": fan gear mode. Supported values are 0, 1 and 2. - -If an optional property is not set in .dts file, then current value is kept -unmodified (e.g. u-boot installed value). - -Additional information on operational parameters for the device is available -in Documentation/hwmon/g762.rst. A detailed datasheet for the device is available -at http://natisbad.org/NAS/refs/GMT_EDS-762_763-080710-0.2.pdf. - -Example g762 node: - - clocks { - #address-cells = <1>; - #size-cells = <0>; - - g762_clk: fixedclk { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <8192>; - } - } - - g762: g762@3e { - compatible = "gmt,g762"; - reg = <0x3e>; - clocks = <&g762_clk> - fan_gear_mode = <0>; /* chip default */ - fan_startv = <1>; /* chip default */ - pwm_polarity = <0>; /* chip default */ - }; diff --git a/Documentation/devicetree/bindings/hwmon/gmt,g76x.yaml b/Documentation/devicetree/bindings/hwmon/gmt,g76x.yaml new file mode 100644 index 000000000000..bfefe49f54bf --- /dev/null +++ b/Documentation/devicetree/bindings/hwmon/gmt,g76x.yaml @@ -0,0 +1,83 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/hwmon/gmt,g76x.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: GMT G762/G763 PWM Fan controller + +maintainers: + - Christian Marangi <ansuelsmth@gmail.com> + +description: | + GMT G762/G763 PWM Fan controller. + + If an optional property is not set in DT, then current value is kept + unmodified (e.g. bootloader installed value). + + Additional information on operational parameters for the device is available + in Documentation/hwmon/g762.rst. A detailed datasheet for the device is available + at http://natisbad.org/NAS/refs/GMT_EDS-762_763-080710-0.2.pdf. + +properties: + compatible: + enum: + - gmt,g762 + - gmt,g763 + + reg: + maxItems: 1 + + clocks: + description: a fixed clock providing input clock frequency on CLK + pin of the chip. + maxItems: 1 + + fan_startv: + description: Fan startup voltage step + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [0, 1, 2, 3] + + pwm_polarity: + description: PWM polarity (psotivie or negative duty) + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [0, 1] + + fan_gear_mode: + description: FAN gear mode. Configure High speed fan setting factor + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [0, 1, 2] + +required: + - compatible + - reg + - clocks + +additionalProperties: false + +examples: + - | + clocks { + #address-cells = <1>; + #size-cells = <0>; + + g762_clk: fixedclk { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <8192>; + }; + }; + + i2c { + #address-cells = <1>; + #size-cells = <0>; + + g762@3e { + compatible = "gmt,g762"; + reg = <0x3e>; + clocks = <&g762_clk>; + fan_gear_mode = <0>; + fan_startv = <1>; + pwm_polarity = <0>; + }; + };
Convert g762 Documentation to yaml schema. Since it supports various device, change the name to g76x and add the vendor prefix. Signed-off-by: Christian Marangi <ansuelsmth@gmail.com> --- .../devicetree/bindings/hwmon/g762.txt | 47 ----------- .../devicetree/bindings/hwmon/gmt,g76x.yaml | 83 +++++++++++++++++++ 2 files changed, 83 insertions(+), 47 deletions(-) delete mode 100644 Documentation/devicetree/bindings/hwmon/g762.txt create mode 100644 Documentation/devicetree/bindings/hwmon/gmt,g76x.yaml