diff mbox series

[v5,01/10] dt-bindings: display: bridge: tc358775: make stby gpio optional

Message ID 20240225062008.33191-2-tony@atomide.com
State Not Applicable
Headers show
Series Improvments for tc358775 with support for tc358765 | expand

Checks

Context Check Description
robh/checkpatch success
robh/patch-applied success
robh/dtbs-check warning build log
robh/dt-meta-schema success

Commit Message

Tony Lindgren Feb. 25, 2024, 6:19 a.m. UTC 
From: Michael Walle <mwalle@kernel.org>

For a normal operation, the stby GPIO is not needed.

The reset pin is required because once the PPI (PHY protocol interface)
is started, it can only be stopped by asserting the reset pin.

Signed-off-by: Michael Walle <mwalle@kernel.org>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
[tony@atomide.com: dropped regulator related changes]
Signed-off-by: Tony Lindgren <tony@atomide.com>
---
 .../devicetree/bindings/display/bridge/toshiba,tc358775.yaml     | 1 -
 1 file changed, 1 deletion(-)
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/display/bridge/toshiba,tc358775.yaml b/Documentation/devicetree/bindings/display/bridge/toshiba,tc358775.yaml
--- a/Documentation/devicetree/bindings/display/bridge/toshiba,tc358775.yaml
+++ b/Documentation/devicetree/bindings/display/bridge/toshiba,tc358775.yaml
@@ -70,7 +70,6 @@  required:
   - reg
   - vdd-supply
   - vddio-supply
-  - stby-gpios
   - reset-gpios
   - ports