| Message ID | 20240205105201.81060-1-Hari.PrasathGE@microchip.com |
|---|---|
| State | Not Applicable |
| Headers | show |
| Series | dt-bindings: ata: atmel: remove at91 compact flash documentation | expand |
| Context | Check | Description |
|---|---|---|
| robh/checkpatch | warning | total: 0 errors, 1 warnings, 0 lines checked |
| robh/patch-applied | success |
On 05/02/2024 at 11:52, Hari Prasath G E - I63539 wrote: > The compatible "at91rm9200-cf" is not used by any driver,hence remove the > corresponding documentation. > > Signed-off-by: Hari Prasath Gujulan Elango <Hari.PrasathGE@microchip.com> Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com> > --- > .../devicetree/bindings/ata/atmel-at91_cf.txt | 19 ------------------- > 1 file changed, 19 deletions(-) > delete mode 100644 Documentation/devicetree/bindings/ata/atmel-at91_cf.txt > > diff --git a/Documentation/devicetree/bindings/ata/atmel-at91_cf.txt b/Documentation/devicetree/bindings/ata/atmel-at91_cf.txt > deleted file mode 100644 > index c1d22b3ae134..000000000000 > --- a/Documentation/devicetree/bindings/ata/atmel-at91_cf.txt > +++ /dev/null > @@ -1,19 +0,0 @@ > -Atmel AT91RM9200 CompactFlash > - > -Required properties: > -- compatible : "atmel,at91rm9200-cf". > -- reg : should specify localbus address and size used. > -- gpios : specifies the gpio pins to control the CF device. Detect > - and reset gpio's are mandatory while irq and vcc gpio's are > - optional and may be set to 0 if not present. > - > -Example: > -compact-flash@50000000 { > - compatible = "atmel,at91rm9200-cf"; > - reg = <0x50000000 0x30000000>; > - gpios = <&pioC 13 0 /* irq */ > - &pioC 15 0 /* detect */ > - 0 /* vcc */ > - &pioC 5 0 /* reset */ > - >; > -};
On Mon, 05 Feb 2024 16:22:01 +0530, Hari Prasath Gujulan Elango wrote: > The compatible "at91rm9200-cf" is not used by any driver,hence remove the > corresponding documentation. > > Signed-off-by: Hari Prasath Gujulan Elango <Hari.PrasathGE@microchip.com> > --- > .../devicetree/bindings/ata/atmel-at91_cf.txt | 19 ------------------- > 1 file changed, 19 deletions(-) > delete mode 100644 Documentation/devicetree/bindings/ata/atmel-at91_cf.txt > Acked-by: Rob Herring <robh@kernel.org>
On Mon, Feb 05, 2024 at 04:22:01PM +0530, Hari Prasath Gujulan Elango wrote: > The compatible "at91rm9200-cf" is not used by any driver,hence remove the > corresponding documentation. > > Signed-off-by: Hari Prasath Gujulan Elango <Hari.PrasathGE@microchip.com> > --- > .../devicetree/bindings/ata/atmel-at91_cf.txt | 19 ------------------- > 1 file changed, 19 deletions(-) > delete mode 100644 Documentation/devicetree/bindings/ata/atmel-at91_cf.txt > > diff --git a/Documentation/devicetree/bindings/ata/atmel-at91_cf.txt b/Documentation/devicetree/bindings/ata/atmel-at91_cf.txt > deleted file mode 100644 > index c1d22b3ae134..000000000000 > --- a/Documentation/devicetree/bindings/ata/atmel-at91_cf.txt > +++ /dev/null > @@ -1,19 +0,0 @@ > -Atmel AT91RM9200 CompactFlash > - > -Required properties: > -- compatible : "atmel,at91rm9200-cf". > -- reg : should specify localbus address and size used. > -- gpios : specifies the gpio pins to control the CF device. Detect > - and reset gpio's are mandatory while irq and vcc gpio's are > - optional and may be set to 0 if not present. > - > -Example: > -compact-flash@50000000 { > - compatible = "atmel,at91rm9200-cf"; > - reg = <0x50000000 0x30000000>; > - gpios = <&pioC 13 0 /* irq */ > - &pioC 15 0 /* detect */ > - 0 /* vcc */ > - &pioC 5 0 /* reset */ > - >; > -}; > -- > 2.34.1 > Applied: https://git.kernel.org/pub/scm/linux/kernel/git/libata/linux.git/log/?h=for-6.9
diff --git a/Documentation/devicetree/bindings/ata/atmel-at91_cf.txt b/Documentation/devicetree/bindings/ata/atmel-at91_cf.txt deleted file mode 100644 index c1d22b3ae134..000000000000 --- a/Documentation/devicetree/bindings/ata/atmel-at91_cf.txt +++ /dev/null @@ -1,19 +0,0 @@ -Atmel AT91RM9200 CompactFlash - -Required properties: -- compatible : "atmel,at91rm9200-cf". -- reg : should specify localbus address and size used. -- gpios : specifies the gpio pins to control the CF device. Detect - and reset gpio's are mandatory while irq and vcc gpio's are - optional and may be set to 0 if not present. - -Example: -compact-flash@50000000 { - compatible = "atmel,at91rm9200-cf"; - reg = <0x50000000 0x30000000>; - gpios = <&pioC 13 0 /* irq */ - &pioC 15 0 /* detect */ - 0 /* vcc */ - &pioC 5 0 /* reset */ - >; -};
The compatible "at91rm9200-cf" is not used by any driver,hence remove the corresponding documentation. Signed-off-by: Hari Prasath Gujulan Elango <Hari.PrasathGE@microchip.com> --- .../devicetree/bindings/ata/atmel-at91_cf.txt | 19 ------------------- 1 file changed, 19 deletions(-) delete mode 100644 Documentation/devicetree/bindings/ata/atmel-at91_cf.txt