diff mbox series

[v2,2/2] dt-bindings: usb: tps6598x: add reset-gpios property

Message ID 20230912-topic-tps6598x_reset-v2-2-02a12e2ec50a@wolfvision.net
State Not Applicable
Headers show
Series usb: typec: tps6598x: add reset gpio support | expand

Checks

Context Check Description
robh/checkpatch success
robh/patch-applied success
robh/dtbs-check warning build log
robh/dt-meta-schema success

Commit Message

Javier Carrasco Sept. 15, 2023, 12:23 p.m. UTC 
The TPS6598x device family provides a high-level reset pin. It can be
either grounded or used to reinitialize all device settings.

Document the reset GPIO as an optional property and add it to the
existing example.

Signed-off-by: Javier Carrasco <javier.carrasco@wolfvision.net>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
 Documentation/devicetree/bindings/usb/ti,tps6598x.yaml | 6 ++++++
 1 file changed, 6 insertions(+)
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/usb/ti,tps6598x.yaml b/Documentation/devicetree/bindings/usb/ti,tps6598x.yaml
index 5497a60cddbc..b1a621e06127 100644
--- a/Documentation/devicetree/bindings/usb/ti,tps6598x.yaml
+++ b/Documentation/devicetree/bindings/usb/ti,tps6598x.yaml
@@ -23,6 +23,10 @@  properties:
   reg:
     maxItems: 1
 
+  reset-gpios:
+    description: GPIO used for the HRESET pin.
+    maxItems: 1
+
   wakeup-source: true
 
   interrupts:
@@ -40,6 +44,7 @@  additionalProperties: true
 
 examples:
   - |
+    #include <dt-bindings/gpio/gpio.h>
     #include <dt-bindings/interrupt-controller/irq.h>
     i2c {
         #address-cells = <1>;
@@ -56,6 +61,7 @@  examples:
 
             pinctrl-names = "default";
             pinctrl-0 = <&typec_pins>;
+            reset-gpios = <&gpio1 6 GPIO_ACTIVE_HIGH>;
 
             typec_con: connector {
                 compatible = "usb-c-connector";