| Message ID | 20230905124340.4116542-1-o.rempel@pengutronix.de |
|---|---|
| State | Changes Requested |
| Headers | show |
| Series | [RFC,net-next,v1,1/2] dt-bindings: net: dsa: microchip: Update ksz device tree bindings for drive strength | expand |
| Context | Check | Description |
|---|---|---|
| robh/checkpatch | success | |
| robh/patch-applied | success | |
| robh/dt-meta-schema | fail | build log |
On Tue, 05 Sep 2023 14:43:39 +0200, Oleksij Rempel wrote: > Extend device tree bindings to support drive strength configuration for the > ksz* switches. Introduced properties: > - microchip,hi-drive-strength-microamp: Controls the drive strength for > high-speed interfaces like GMII/RGMII and more. > - microchip,lo-drive-strength-microamp: Governs the drive strength for > low-speed interfaces such as LEDs, PME_N, and others. > > Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> > --- > .../bindings/net/dsa/microchip,ksz.yaml | 16 ++++++++++++++++ > 1 file changed, 16 insertions(+) > My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check' on your patch (DT_CHECKER_FLAGS is new in v5.13): yamllint warnings/errors: ./Documentation/devicetree/bindings/net/dsa/microchip,ksz.yaml:54:9: [warning] wrong indentation: expected 6 but found 8 (indentation) ./Documentation/devicetree/bindings/net/dsa/microchip,ksz.yaml:62:9: [warning] wrong indentation: expected 6 but found 8 (indentation) dtschema/dtc warnings/errors: doc reference errors (make refcheckdocs): See https://patchwork.ozlabs.org/project/devicetree-bindings/patch/20230905124340.4116542-1-o.rempel@pengutronix.de The base for the series is generally the latest rc1. A different dependency should be noted in *this* patch. If you already ran 'make dt_binding_check' and didn't see the above error(s), then make sure 'yamllint' is installed and dt-schema is up to date: pip3 install dtschema --upgrade Please check and re-submit after running the above command yourself. Note that DT_SCHEMA_FILES can be set to your schema file to speed up checking your schema. However, it must be unset to test all examples with your schema.
diff --git a/Documentation/devicetree/bindings/net/dsa/microchip,ksz.yaml b/Documentation/devicetree/bindings/net/dsa/microchip,ksz.yaml index e51be1ac03623..97d655eb01b6f 100644 --- a/Documentation/devicetree/bindings/net/dsa/microchip,ksz.yaml +++ b/Documentation/devicetree/bindings/net/dsa/microchip,ksz.yaml @@ -49,6 +49,22 @@ properties: Set if the output SYNCLKO clock should be disabled. Do not mix with microchip,synclko-125. + microchip,hi-drive-strength-microamp: + description: + High Speed Drive Strength. Controls drive strength of GMII / RGMII / + MII / RMII (except TX_CLK/REFCLKI, COL and CRS) and CLKO_25_125 lines. + minimum: 2000 + maximum: 28000 + default: 24000 + + microchip,lo-drive-strength-microamp: + description: + Low Speed Drive Strength. Controls drive strength of TX_CLK / REFCLKI, + COL, CRS, LEDs, PME_N, NTRP_N, SDO and SDI/SDA/MDIO lines. + minimum: 2000 + maximum: 28000 + default: 8000 + required: - compatible - reg
Extend device tree bindings to support drive strength configuration for the ksz* switches. Introduced properties: - microchip,hi-drive-strength-microamp: Controls the drive strength for high-speed interfaces like GMII/RGMII and more. - microchip,lo-drive-strength-microamp: Governs the drive strength for low-speed interfaces such as LEDs, PME_N, and others. Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> --- .../bindings/net/dsa/microchip,ksz.yaml | 16 ++++++++++++++++ 1 file changed, 16 insertions(+)