diff mbox series

dt-bindings: net: ftgmac100: convert to yaml version from txt

Message ID 20230723155107.4498-1-fr0st61te@gmail.com
State Superseded, archived
Headers show
Series dt-bindings: net: ftgmac100: convert to yaml version from txt | expand

Checks

Context Check Description
robh/checkpatch warning total: 0 errors, 2 warnings, 102 lines checked
robh/patch-applied success
robh/dt-meta-schema fail build log

Commit Message

Ivan Mikhaylov July 23, 2023, 3:51 p.m. UTC 
Conversion from ftgmac100.txt to yaml format version.

Signed-off-by: Ivan Mikhaylov <fr0st61te@gmail.com>
---
 .../bindings/net/faraday,ftgmac100.yaml       | 102 ++++++++++++++++++
 .../devicetree/bindings/net/ftgmac100.txt     |  67 ------------
 2 files changed, 102 insertions(+), 67 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/net/faraday,ftgmac100.yaml
 delete mode 100644 Documentation/devicetree/bindings/net/ftgmac100.txt

Comments

Rob Herring (Arm) July 23, 2023, 4:21 p.m. UTC | #1 
On Sun, 23 Jul 2023 18:51:07 +0300, Ivan Mikhaylov wrote:
> Conversion from ftgmac100.txt to yaml format version.
> 
> Signed-off-by: Ivan Mikhaylov <fr0st61te@gmail.com>
> ---
>  .../bindings/net/faraday,ftgmac100.yaml       | 102 ++++++++++++++++++
>  .../devicetree/bindings/net/ftgmac100.txt     |  67 ------------
>  2 files changed, 102 insertions(+), 67 deletions(-)
>  create mode 100644 Documentation/devicetree/bindings/net/faraday,ftgmac100.yaml
>  delete mode 100644 Documentation/devicetree/bindings/net/ftgmac100.txt
> 

My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check'
on your patch (DT_CHECKER_FLAGS is new in v5.13):

yamllint warnings/errors:

dtschema/dtc warnings/errors:
/builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/net/faraday,ftgmac100.yaml: properties:clock-names: 'oneOf' conditional failed, one must be fixed:
	[{'enum': ['MACCLK', 'RCLK']}] is too short
	False schema does not allow 1
	hint: "minItems" is only needed if less than the "items" list length
	from schema $id: http://devicetree.org/meta-schemas/core.yaml#

doc reference errors (make refcheckdocs):

See https://patchwork.ozlabs.org/project/devicetree-bindings/patch/20230723155107.4498-1-fr0st61te@gmail.com

The base for the series is generally the latest rc1. A different dependency
should be noted in *this* patch.

If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure 'yamllint' is installed and dt-schema is up to
date:

pip3 install dtschema --upgrade

Please check and re-submit after running the above command yourself. Note
that DT_SCHEMA_FILES can be set to your schema file to speed up checking
your schema. However, it must be unset to test all examples with your schema.
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/net/faraday,ftgmac100.yaml b/Documentation/devicetree/bindings/net/faraday,ftgmac100.yaml
new file mode 100644
index 000000000000..f1e72290ed94
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/faraday,ftgmac100.yaml
@@ -0,0 +1,102 @@ 
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/faraday,ftgmac100.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Faraday Technology FTGMAC100 gigabit ethernet controller
+
+allOf:
+  - $ref: ethernet-controller.yaml#
+
+maintainers:
+  - Po-Yu Chuang <ratbert@faraday-tech.com>
+
+properties:
+  compatible:
+    oneOf:
+      - const: faraday,ftgmac100
+      - items:
+          - enum:
+              - aspeed,ast2400-mac
+              - aspeed,ast2500-mac
+              - aspeed,ast2600-mac
+          - const: faraday,ftgmac100
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    description:
+      The MAC IP clock and optionally a RMII RCLK gate for the AST2500/AST2600.
+    minItems: 1
+    maxItems: 2
+
+  clock-names:
+    items:
+      - enum:
+          - MACCLK
+          - RCLK
+    minItems: 1
+
+  phy-mode:
+    enum:
+      - rgmii
+      - rmii
+
+  phy-handle: true
+
+  use-ncsi:
+    description:
+      Use the NC-SI stack instead of an MDIO PHY. Currently assumes
+      rmii (100bT) but kept as a separate property in case NC-SI grows support
+      for a gigabit link.
+    type: boolean
+
+  no-hw-checksum:
+    description:
+      Used to disable HW checksum support. Here for backward
+      compatibility as the driver now should have correct defaults based on
+      the SoC.
+    type: boolean
+
+  mdio:
+    $ref: /schemas/net/mdio.yaml#
+
+required:
+  - compatible
+  - reg
+  - interrupts
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    mac0: ethernet@1e660000 {
+        compatible = "aspeed,ast2500-mac", "faraday,ftgmac100";
+        reg = <0x1e660000 0x180>;
+        interrupts = <2>;
+        use-ncsi;
+    };
+
+    mac1: ethernet@1e680000 {
+        compatible = "aspeed,ast2500-mac", "faraday,ftgmac100";
+        reg = <0x1e680000 0x180>;
+        interrupts = <2>;
+
+        phy-handle = <&phy>;
+        phy-mode = "rgmii";
+
+        mdio {
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            phy: ethernet-phy@1 {
+                compatible = "ethernet-phy-ieee802.3-c22";
+                reg = <1>;
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/net/ftgmac100.txt b/Documentation/devicetree/bindings/net/ftgmac100.txt
deleted file mode 100644
index 29234021f601..000000000000
--- a/Documentation/devicetree/bindings/net/ftgmac100.txt
+++ /dev/null
@@ -1,67 +0,0 @@ 
-* Faraday Technology FTGMAC100 gigabit ethernet controller
-
-Required properties:
-- compatible: "faraday,ftgmac100"
-
-  Must also contain one of these if used as part of an Aspeed AST2400
-  or 2500 family SoC as they have some subtle tweaks to the
-  implementation:
-
-     - "aspeed,ast2400-mac"
-     - "aspeed,ast2500-mac"
-     - "aspeed,ast2600-mac"
-
-- reg: Address and length of the register set for the device
-- interrupts: Should contain ethernet controller interrupt
-
-Optional properties:
-- phy-handle: See ethernet.txt file in the same directory.
-- phy-mode: See ethernet.txt file in the same directory. If the property is
-  absent, "rgmii" is assumed. Supported values are "rgmii*" and "rmii" for
-  aspeed parts. Other (unknown) parts will accept any value.
-- use-ncsi: Use the NC-SI stack instead of an MDIO PHY. Currently assumes
-  rmii (100bT) but kept as a separate property in case NC-SI grows support
-  for a gigabit link.
-- no-hw-checksum: Used to disable HW checksum support. Here for backward
-  compatibility as the driver now should have correct defaults based on
-  the SoC.
-- clocks: In accordance with the generic clock bindings. Must describe the MAC
-  IP clock, and optionally an RMII RCLK gate for the AST2500/AST2600. The
-  required MAC clock must be the first cell.
-- clock-names:
-
-      - "MACCLK": The MAC IP clock
-      - "RCLK": Clock gate for the RMII RCLK
-
-Optional subnodes:
-- mdio: See mdio.txt file in the same directory.
-
-Example:
-
-	mac0: ethernet@1e660000 {
-		compatible = "aspeed,ast2500-mac", "faraday,ftgmac100";
-		reg = <0x1e660000 0x180>;
-		interrupts = <2>;
-		use-ncsi;
-	};
-
-Example with phy-handle:
-
-	mac1: ethernet@1e680000 {
-		compatible = "aspeed,ast2500-mac", "faraday,ftgmac100";
-		reg = <0x1e680000 0x180>;
-		interrupts = <2>;
-
-		phy-handle = <&phy>;
-		phy-mode = "rgmii";
-
-		mdio {
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			phy: ethernet-phy@1 {
-				compatible = "ethernet-phy-ieee802.3-c22";
-				reg = <1>;
-			};
-		};
-	};