diff mbox series

ASoC: dt-bindings: cirrus,cs35l45: drop unneeded quotes

Message ID 20230609140658.64557-1-krzysztof.kozlowski@linaro.org
State Not Applicable, archived
Headers show
Series ASoC: dt-bindings: cirrus,cs35l45: drop unneeded quotes | expand

Checks

Context Check Description
robh/checkpatch success
robh/patch-applied success
robh/dtbs-check warning build log
robh/dt-meta-schema success

Commit Message

Krzysztof Kozlowski June 9, 2023, 2:06 p.m. UTC
Cleanup bindings dropping unneeded quotes. Once all these are fixed,
checking for this can be enabled in yamllint.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
 .../devicetree/bindings/sound/cirrus,cs35l45.yaml      | 10 +++++-----
 1 file changed, 5 insertions(+), 5 deletions(-)

Comments

Charles Keepax June 12, 2023, 8:15 a.m. UTC | #1
On Fri, Jun 09, 2023 at 04:06:58PM +0200, Krzysztof Kozlowski wrote:
> Cleanup bindings dropping unneeded quotes. Once all these are fixed,
> checking for this can be enabled in yamllint.
> 
> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
> ---

Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>

Thanks,
Charles
Mark Brown June 12, 2023, 5:26 p.m. UTC | #2
On Fri, 09 Jun 2023 16:06:58 +0200, Krzysztof Kozlowski wrote:
> Cleanup bindings dropping unneeded quotes. Once all these are fixed,
> checking for this can be enabled in yamllint.
> 
> 

Applied to

   https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound.git for-next

Thanks!

[1/1] ASoC: dt-bindings: cirrus,cs35l45: drop unneeded quotes
      commit: 374b54532b1c94076799518cad5c33536eaf0c1b

All being well this means that it will be integrated into the linux-next
tree (usually sometime in the next 24 hours) and sent to Linus during
the next merge window (or sooner if it is a bug fix), however if
problems are discovered then the patch may be dropped or reverted.

You may get further e-mails resulting from automated or manual testing
and review of the tree, please engage with people reporting problems and
send followup patches addressing any issues that are reported if needed.

If any updates are required or you are submitting further changes they
should be sent as incremental updates against current git, existing
patches will not be replaced.

Please add any relevant lists and maintainers to the CCs when replying
to this mail.

Thanks,
Mark
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/sound/cirrus,cs35l45.yaml b/Documentation/devicetree/bindings/sound/cirrus,cs35l45.yaml
index 2ab74f995685..4c9acb8d4c4c 100644
--- a/Documentation/devicetree/bindings/sound/cirrus,cs35l45.yaml
+++ b/Documentation/devicetree/bindings/sound/cirrus,cs35l45.yaml
@@ -62,7 +62,7 @@  patternProperties:
           GPIO pin direction. Valid only when 'gpio-ctrl' is 1
             0 = Output
             1 = Input
-        $ref: "/schemas/types.yaml#/definitions/uint32"
+        $ref: /schemas/types.yaml#/definitions/uint32
         minimum: 0
         maximum: 1
         default: 1
@@ -71,7 +71,7 @@  patternProperties:
           GPIO level. Valid only when 'gpio-ctrl' is 1 and 'gpio-dir' is 0
             0 = Low
             1 = High
-        $ref: "/schemas/types.yaml#/definitions/uint32"
+        $ref: /schemas/types.yaml#/definitions/uint32
         minimum: 0
         maximum: 1
         default: 0
@@ -80,7 +80,7 @@  patternProperties:
           GPIO level. Valid only when 'gpio-ctrl' is 1 and 'gpio-dir' is 0
             0 = CMOS
             1 = Open Drain
-        $ref: "/schemas/types.yaml#/definitions/uint32"
+        $ref: /schemas/types.yaml#/definitions/uint32
         minimum: 0
         maximum: 1
         default: 0
@@ -90,7 +90,7 @@  patternProperties:
           and 'gpio-dir' is 0
             0 = Non-inverted, Active High
             1 = Inverted, Active Low
-        $ref: "/schemas/types.yaml#/definitions/uint32"
+        $ref: /schemas/types.yaml#/definitions/uint32
         minimum: 0
         maximum: 1
         default: 0
@@ -114,7 +114,7 @@  patternProperties:
             0 = High impedance input
             1 = Pin acts as a GPIO, direction controlled by 'gpio-dir'
             2-7 = Reserved
-        $ref: "/schemas/types.yaml#/definitions/uint32"
+        $ref: /schemas/types.yaml#/definitions/uint32
         minimum: 0
         maximum: 7
         default: 0