| Message ID | 20230607065121.2265076-2-piyush.mehta@amd.com |
|---|---|
| State | Changes Requested, archived |
| Headers | show |
| Series | dt-bindings: reset: convert the xlnx,zynqmp-reset.txt to yaml | expand |
| Context | Check | Description |
|---|---|---|
| robh/checkpatch | warning | total: 0 errors, 2 warnings, 67 lines checked |
| robh/patch-applied | success | |
| robh/dt-meta-schema | fail | build log |
On Wed, 07 Jun 2023 12:21:20 +0530, Piyush Mehta wrote: > Convert the binding to DT schema format. It also updates the > reset-controller description. > > Signed-off-by: Piyush Mehta <piyush.mehta@amd.com> > --- > Note: > The 1/2 patch introduced a warning related to the dt binding check, > which was subsequently fixed in the 2/2 patch. This warning is a > conversion warning due to a dependency on firmware dt binding. > > Warning: > DTC_CHK Documentation/devicetree/bindings/reset/xlnx,zynqmp-reset.example.dtb > /scratch/piyushm/torvalds/linux/Documentation/devicetree/bindings/reset/xlnx,zynqmp-reset.example.dtb: zynqmp-firmware: 'reset-controller' does not match any of the regexes: 'pinctrl-[0-9]+' > From schema: /scratch/piyushm/torvalds/linux/Documentation/devicetree/bindings/firmware/xilinx/xlnx,zynqmp-firmware.yaml > > Please suggest to me, if it's fine to make a single patch instead of the > separate patch 1/2 and 2/2. > --- > .../bindings/reset/xlnx,zynqmp-reset.txt | 55 --------------- > .../bindings/reset/xlnx,zynqmp-reset.yaml | 67 +++++++++++++++++++ > 2 files changed, 67 insertions(+), 55 deletions(-) > delete mode 100644 Documentation/devicetree/bindings/reset/xlnx,zynqmp-reset.txt > create mode 100644 Documentation/devicetree/bindings/reset/xlnx,zynqmp-reset.yaml > My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check' on your patch (DT_CHECKER_FLAGS is new in v5.13): yamllint warnings/errors: dtschema/dtc warnings/errors: /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/reset/xlnx,zynqmp-reset.example.dtb: zynqmp-firmware: 'reset-controller' does not match any of the regexes: 'pinctrl-[0-9]+' From schema: /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/firmware/xilinx/xlnx,zynqmp-firmware.yaml doc reference errors (make refcheckdocs): See https://patchwork.ozlabs.org/project/devicetree-bindings/patch/20230607065121.2265076-2-piyush.mehta@amd.com The base for the series is generally the latest rc1. A different dependency should be noted in *this* patch. If you already ran 'make dt_binding_check' and didn't see the above error(s), then make sure 'yamllint' is installed and dt-schema is up to date: pip3 install dtschema --upgrade Please check and re-submit after running the above command yourself. Note that DT_SCHEMA_FILES can be set to your schema file to speed up checking your schema. However, it must be unset to test all examples with your schema.
Hello, > -----Original Message----- > From: Rob Herring <robh@kernel.org> > Sent: Wednesday, June 7, 2023 1:06 PM > To: Mehta, Piyush <piyush.mehta@amd.com> > Cc: p.zabel@pengutronix.de; Paladugu, Siva Durga Prasad > <siva.durga.prasad.paladugu@amd.com>; michal.simek@xilinx.com; > nava.manne@xilinx.com; devicetree@vger.kernel.org; linux- > kernel@vger.kernel.org; linux-usb@vger.kernel.org; conor+dt@kernel.org; > krzysztof.kozlowski+dt@linaro.org; robh+dt@kernel.org; Simek, Michal > <michal.simek@amd.com>; git (AMD-Xilinx) <git@amd.com> > Subject: Re: [PATCH 1/2] dt-bindings: reset: convert the xlnx,zynqmp-reset.txt > to yaml > > > On Wed, 07 Jun 2023 12:21:20 +0530, Piyush Mehta wrote: > > Convert the binding to DT schema format. It also updates the > > reset-controller description. > > > > Signed-off-by: Piyush Mehta <piyush.mehta@amd.com> > > --- > > Note: > > The 1/2 patch introduced a warning related to the dt binding check, > > which was subsequently fixed in the 2/2 patch. This warning is a > > conversion warning due to a dependency on firmware dt binding. > > > > Warning: > > DTC_CHK > > Documentation/devicetree/bindings/reset/xlnx,zynqmp-reset.example.dtb > > > /scratch/piyushm/torvalds/linux/Documentation/devicetree/bindings/reset/xln > x,zynqmp-reset.example.dtb: zynqmp-firmware: 'reset-controller' does not > match any of the regexes: 'pinctrl-[0-9]+' > > From schema: > > /scratch/piyushm/torvalds/linux/Documentation/devicetree/bindings/firm > > ware/xilinx/xlnx,zynqmp-firmware.yaml > > > > Please suggest to me, if it's fine to make a single patch instead of > > the separate patch 1/2 and 2/2. > > --- > > .../bindings/reset/xlnx,zynqmp-reset.txt | 55 --------------- > > .../bindings/reset/xlnx,zynqmp-reset.yaml | 67 +++++++++++++++++++ > > 2 files changed, 67 insertions(+), 55 deletions(-) delete mode > > 100644 Documentation/devicetree/bindings/reset/xlnx,zynqmp-reset.txt > > create mode 100644 > > Documentation/devicetree/bindings/reset/xlnx,zynqmp-reset.yaml > > > > My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check' > on your patch (DT_CHECKER_FLAGS is new in v5.13): > > yamllint warnings/errors: > > dtschema/dtc warnings/errors: > /builds/robherring/dt-review- > ci/linux/Documentation/devicetree/bindings/reset/xlnx,zynqmp- > reset.example.dtb: zynqmp-firmware: 'reset-controller' does not match any of > the regexes: 'pinctrl-[0-9]+' > From schema: /builds/robherring/dt-review- > ci/linux/Documentation/devicetree/bindings/firmware/xilinx/xlnx,zynqmp- > firmware.yaml > > doc reference errors (make refcheckdocs): > > See https://patchwork.ozlabs.org/project/devicetree- > bindings/patch/20230607065121.2265076-2-piyush.mehta@amd.com > > The base for the series is generally the latest rc1. A different dependency > should be noted in *this* patch. > > If you already ran 'make dt_binding_check' and didn't see the above error(s), > then make sure 'yamllint' is installed and dt-schema is up to > date: > > pip3 install dtschema --upgrade > > Please check and re-submit after running the above command yourself. Note > that DT_SCHEMA_FILES can be set to your schema file to speed up checking > your schema. However, it must be unset to test all examples with your schema. This dt_binding warning is known to us and is captured in commit description notes and to resolve it, we need to apply 2/2. I want to take DT maintainer opinion if we should keep the fix in 2/2 or merge it in 1/2. Regards, Piyush Mehta
On 08/06/2023 12:55, Mehta, Piyush wrote: > Hello, > >> -----Original Message----- >> From: Rob Herring <robh@kernel.org> >> Sent: Wednesday, June 7, 2023 1:06 PM >> To: Mehta, Piyush <piyush.mehta@amd.com> >> Cc: p.zabel@pengutronix.de; Paladugu, Siva Durga Prasad >> <siva.durga.prasad.paladugu@amd.com>; michal.simek@xilinx.com; >> nava.manne@xilinx.com; devicetree@vger.kernel.org; linux- >> kernel@vger.kernel.org; linux-usb@vger.kernel.org; conor+dt@kernel.org; >> krzysztof.kozlowski+dt@linaro.org; robh+dt@kernel.org; Simek, Michal >> <michal.simek@amd.com>; git (AMD-Xilinx) <git@amd.com> >> Subject: Re: [PATCH 1/2] dt-bindings: reset: convert the xlnx,zynqmp-reset.txt >> to yaml >> >> >> On Wed, 07 Jun 2023 12:21:20 +0530, Piyush Mehta wrote: >>> Convert the binding to DT schema format. It also updates the >>> reset-controller description. >>> >>> Signed-off-by: Piyush Mehta <piyush.mehta@amd.com> >>> --- >>> Note: >>> The 1/2 patch introduced a warning related to the dt binding check, >>> which was subsequently fixed in the 2/2 patch. This warning is a >>> conversion warning due to a dependency on firmware dt binding. >>> >>> Warning: >>> DTC_CHK >>> Documentation/devicetree/bindings/reset/xlnx,zynqmp-reset.example.dtb >>> >> /scratch/piyushm/torvalds/linux/Documentation/devicetree/bindings/reset/xln >> x,zynqmp-reset.example.dtb: zynqmp-firmware: 'reset-controller' does not >> match any of the regexes: 'pinctrl-[0-9]+' >>> From schema: >>> /scratch/piyushm/torvalds/linux/Documentation/devicetree/bindings/firm >>> ware/xilinx/xlnx,zynqmp-firmware.yaml >>> >>> Please suggest to me, if it's fine to make a single patch instead of >>> the separate patch 1/2 and 2/2. >>> --- >>> .../bindings/reset/xlnx,zynqmp-reset.txt | 55 --------------- >>> .../bindings/reset/xlnx,zynqmp-reset.yaml | 67 +++++++++++++++++++ >>> 2 files changed, 67 insertions(+), 55 deletions(-) delete mode >>> 100644 Documentation/devicetree/bindings/reset/xlnx,zynqmp-reset.txt >>> create mode 100644 >>> Documentation/devicetree/bindings/reset/xlnx,zynqmp-reset.yaml >>> >> >> My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check' >> on your patch (DT_CHECKER_FLAGS is new in v5.13): >> >> yamllint warnings/errors: >> >> dtschema/dtc warnings/errors: >> /builds/robherring/dt-review- >> ci/linux/Documentation/devicetree/bindings/reset/xlnx,zynqmp- >> reset.example.dtb: zynqmp-firmware: 'reset-controller' does not match any of >> the regexes: 'pinctrl-[0-9]+' >> From schema: /builds/robherring/dt-review- >> ci/linux/Documentation/devicetree/bindings/firmware/xilinx/xlnx,zynqmp- >> firmware.yaml >> >> doc reference errors (make refcheckdocs): >> >> See https://patchwork.ozlabs.org/project/devicetree- >> bindings/patch/20230607065121.2265076-2-piyush.mehta@amd.com >> >> The base for the series is generally the latest rc1. A different dependency >> should be noted in *this* patch. >> >> If you already ran 'make dt_binding_check' and didn't see the above error(s), >> then make sure 'yamllint' is installed and dt-schema is up to >> date: >> >> pip3 install dtschema --upgrade >> >> Please check and re-submit after running the above command yourself. Note >> that DT_SCHEMA_FILES can be set to your schema file to speed up checking >> your schema. However, it must be unset to test all examples with your schema. > > This dt_binding warning is known to us and is captured in commit description notes and to resolve it, we need to apply 2/2. So your patchset has broken bisectability. You need to fix it. If the warning was known, then I am surprised that you sent broken patchset. > I want to take DT maintainer opinion if we should keep the fix in 2/2 or merge it in 1/2. Just avoid the warning. Anyway you need only one complete example, right? Best regards, Krzysztof
On 6/8/23 13:29, Krzysztof Kozlowski wrote: > On 08/06/2023 12:55, Mehta, Piyush wrote: >> Hello, >> >>> -----Original Message----- >>> From: Rob Herring <robh@kernel.org> >>> Sent: Wednesday, June 7, 2023 1:06 PM >>> To: Mehta, Piyush <piyush.mehta@amd.com> >>> Cc: p.zabel@pengutronix.de; Paladugu, Siva Durga Prasad >>> <siva.durga.prasad.paladugu@amd.com>; michal.simek@xilinx.com; >>> nava.manne@xilinx.com; devicetree@vger.kernel.org; linux- >>> kernel@vger.kernel.org; linux-usb@vger.kernel.org; conor+dt@kernel.org; >>> krzysztof.kozlowski+dt@linaro.org; robh+dt@kernel.org; Simek, Michal >>> <michal.simek@amd.com>; git (AMD-Xilinx) <git@amd.com> >>> Subject: Re: [PATCH 1/2] dt-bindings: reset: convert the xlnx,zynqmp-reset.txt >>> to yaml >>> >>> >>> On Wed, 07 Jun 2023 12:21:20 +0530, Piyush Mehta wrote: >>>> Convert the binding to DT schema format. It also updates the >>>> reset-controller description. >>>> >>>> Signed-off-by: Piyush Mehta <piyush.mehta@amd.com> >>>> --- >>>> Note: >>>> The 1/2 patch introduced a warning related to the dt binding check, >>>> which was subsequently fixed in the 2/2 patch. This warning is a >>>> conversion warning due to a dependency on firmware dt binding. >>>> >>>> Warning: >>>> DTC_CHK >>>> Documentation/devicetree/bindings/reset/xlnx,zynqmp-reset.example.dtb >>>> >>> /scratch/piyushm/torvalds/linux/Documentation/devicetree/bindings/reset/xln >>> x,zynqmp-reset.example.dtb: zynqmp-firmware: 'reset-controller' does not >>> match any of the regexes: 'pinctrl-[0-9]+' >>>> From schema: >>>> /scratch/piyushm/torvalds/linux/Documentation/devicetree/bindings/firm >>>> ware/xilinx/xlnx,zynqmp-firmware.yaml >>>> >>>> Please suggest to me, if it's fine to make a single patch instead of >>>> the separate patch 1/2 and 2/2. >>>> --- >>>> .../bindings/reset/xlnx,zynqmp-reset.txt | 55 --------------- >>>> .../bindings/reset/xlnx,zynqmp-reset.yaml | 67 +++++++++++++++++++ >>>> 2 files changed, 67 insertions(+), 55 deletions(-) delete mode >>>> 100644 Documentation/devicetree/bindings/reset/xlnx,zynqmp-reset.txt >>>> create mode 100644 >>>> Documentation/devicetree/bindings/reset/xlnx,zynqmp-reset.yaml >>>> >>> >>> My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check' >>> on your patch (DT_CHECKER_FLAGS is new in v5.13): >>> >>> yamllint warnings/errors: >>> >>> dtschema/dtc warnings/errors: >>> /builds/robherring/dt-review- >>> ci/linux/Documentation/devicetree/bindings/reset/xlnx,zynqmp- >>> reset.example.dtb: zynqmp-firmware: 'reset-controller' does not match any of >>> the regexes: 'pinctrl-[0-9]+' >>> From schema: /builds/robherring/dt-review- >>> ci/linux/Documentation/devicetree/bindings/firmware/xilinx/xlnx,zynqmp- >>> firmware.yaml >>> >>> doc reference errors (make refcheckdocs): >>> >>> See https://patchwork.ozlabs.org/project/devicetree- >>> bindings/patch/20230607065121.2265076-2-piyush.mehta@amd.com >>> >>> The base for the series is generally the latest rc1. A different dependency >>> should be noted in *this* patch. >>> >>> If you already ran 'make dt_binding_check' and didn't see the above error(s), >>> then make sure 'yamllint' is installed and dt-schema is up to >>> date: >>> >>> pip3 install dtschema --upgrade >>> >>> Please check and re-submit after running the above command yourself. Note >>> that DT_SCHEMA_FILES can be set to your schema file to speed up checking >>> your schema. However, it must be unset to test all examples with your schema. >> >> This dt_binding warning is known to us and is captured in commit description notes and to resolve it, we need to apply 2/2. > > So your patchset has broken bisectability. You need to fix it. If the > warning was known, then I am surprised that you sent broken patchset. The first patch is conversion from txt yaml without any additional changes because in past we heart that we shouldn't really do other things in it. That's why 2 patches where made. No really issue to squashed them together. Thanks, Michal
On 08/06/2023 13:34, Michal Simek wrote: > > > On 6/8/23 13:29, Krzysztof Kozlowski wrote: >> On 08/06/2023 12:55, Mehta, Piyush wrote: >>> Hello, >>> >>>> -----Original Message----- >>>> From: Rob Herring <robh@kernel.org> >>>> Sent: Wednesday, June 7, 2023 1:06 PM >>>> To: Mehta, Piyush <piyush.mehta@amd.com> >>>> Cc: p.zabel@pengutronix.de; Paladugu, Siva Durga Prasad >>>> <siva.durga.prasad.paladugu@amd.com>; michal.simek@xilinx.com; >>>> nava.manne@xilinx.com; devicetree@vger.kernel.org; linux- >>>> kernel@vger.kernel.org; linux-usb@vger.kernel.org; conor+dt@kernel.org; >>>> krzysztof.kozlowski+dt@linaro.org; robh+dt@kernel.org; Simek, Michal >>>> <michal.simek@amd.com>; git (AMD-Xilinx) <git@amd.com> >>>> Subject: Re: [PATCH 1/2] dt-bindings: reset: convert the xlnx,zynqmp-reset.txt >>>> to yaml >>>> >>>> >>>> On Wed, 07 Jun 2023 12:21:20 +0530, Piyush Mehta wrote: >>>>> Convert the binding to DT schema format. It also updates the >>>>> reset-controller description. >>>>> >>>>> Signed-off-by: Piyush Mehta <piyush.mehta@amd.com> >>>>> --- >>>>> Note: >>>>> The 1/2 patch introduced a warning related to the dt binding check, >>>>> which was subsequently fixed in the 2/2 patch. This warning is a >>>>> conversion warning due to a dependency on firmware dt binding. >>>>> >>>>> Warning: >>>>> DTC_CHK >>>>> Documentation/devicetree/bindings/reset/xlnx,zynqmp-reset.example.dtb >>>>> >>>> /scratch/piyushm/torvalds/linux/Documentation/devicetree/bindings/reset/xln >>>> x,zynqmp-reset.example.dtb: zynqmp-firmware: 'reset-controller' does not >>>> match any of the regexes: 'pinctrl-[0-9]+' >>>>> From schema: >>>>> /scratch/piyushm/torvalds/linux/Documentation/devicetree/bindings/firm >>>>> ware/xilinx/xlnx,zynqmp-firmware.yaml >>>>> >>>>> Please suggest to me, if it's fine to make a single patch instead of >>>>> the separate patch 1/2 and 2/2. >>>>> --- >>>>> .../bindings/reset/xlnx,zynqmp-reset.txt | 55 --------------- >>>>> .../bindings/reset/xlnx,zynqmp-reset.yaml | 67 +++++++++++++++++++ >>>>> 2 files changed, 67 insertions(+), 55 deletions(-) delete mode >>>>> 100644 Documentation/devicetree/bindings/reset/xlnx,zynqmp-reset.txt >>>>> create mode 100644 >>>>> Documentation/devicetree/bindings/reset/xlnx,zynqmp-reset.yaml >>>>> >>>> >>>> My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check' >>>> on your patch (DT_CHECKER_FLAGS is new in v5.13): >>>> >>>> yamllint warnings/errors: >>>> >>>> dtschema/dtc warnings/errors: >>>> /builds/robherring/dt-review- >>>> ci/linux/Documentation/devicetree/bindings/reset/xlnx,zynqmp- >>>> reset.example.dtb: zynqmp-firmware: 'reset-controller' does not match any of >>>> the regexes: 'pinctrl-[0-9]+' >>>> From schema: /builds/robherring/dt-review- >>>> ci/linux/Documentation/devicetree/bindings/firmware/xilinx/xlnx,zynqmp- >>>> firmware.yaml >>>> >>>> doc reference errors (make refcheckdocs): >>>> >>>> See https://patchwork.ozlabs.org/project/devicetree- >>>> bindings/patch/20230607065121.2265076-2-piyush.mehta@amd.com >>>> >>>> The base for the series is generally the latest rc1. A different dependency >>>> should be noted in *this* patch. >>>> >>>> If you already ran 'make dt_binding_check' and didn't see the above error(s), >>>> then make sure 'yamllint' is installed and dt-schema is up to >>>> date: >>>> >>>> pip3 install dtschema --upgrade >>>> >>>> Please check and re-submit after running the above command yourself. Note >>>> that DT_SCHEMA_FILES can be set to your schema file to speed up checking >>>> your schema. However, it must be unset to test all examples with your schema. >>> >>> This dt_binding warning is known to us and is captured in commit description notes and to resolve it, we need to apply 2/2. >> >> So your patchset has broken bisectability. You need to fix it. If the >> warning was known, then I am surprised that you sent broken patchset. > > The first patch is conversion from txt yaml without any additional changes > because in past we heart that we shouldn't really do other things in it. That's > why 2 patches where made. No really issue to squashed them together. We always shared feedback that conversion should do only conversion, but a correct one. Conversion cannot introduce errors or warnings in the bindings. It can introduce warnings in DTS, but not in the bindings. This was also communicated several times. If pure-conversion results in non-bisectable patchset then: 1. either conversion should come with changes, 2. or conversion is done a bit wrong or could be done differently like here. You really do not need unrelated pieces of DTS in reset controller code. Drop them. Best regards, Krzysztof
diff --git a/Documentation/devicetree/bindings/reset/xlnx,zynqmp-reset.txt b/Documentation/devicetree/bindings/reset/xlnx,zynqmp-reset.txt deleted file mode 100644 index ed836868dbf1..000000000000 --- a/Documentation/devicetree/bindings/reset/xlnx,zynqmp-reset.txt +++ /dev/null @@ -1,55 +0,0 @@ --------------------------------------------------------------------------- - = Zynq UltraScale+ MPSoC and Versal reset driver binding = --------------------------------------------------------------------------- -The Zynq UltraScale+ MPSoC and Versal has several different resets. - -See Chapter 36 of the Zynq UltraScale+ MPSoC TRM (UG) for more information -about zynqmp resets. - -Please also refer to reset.txt in this directory for common reset -controller binding usage. - -Required Properties: -- compatible: "xlnx,zynqmp-reset" for Zynq UltraScale+ MPSoC platform - "xlnx,versal-reset" for Versal platform -- #reset-cells: Specifies the number of cells needed to encode reset - line, should be 1 - -------- -Example -------- - -firmware { - zynqmp_firmware: zynqmp-firmware { - compatible = "xlnx,zynqmp-firmware"; - method = "smc"; - - zynqmp_reset: reset-controller { - compatible = "xlnx,zynqmp-reset"; - #reset-cells = <1>; - }; - }; -}; - -Specifying reset lines connected to IP modules -============================================== - -Device nodes that need access to reset lines should -specify them as a reset phandle in their corresponding node as -specified in reset.txt. - -For list of all valid reset indices for Zynq UltraScale+ MPSoC see -<dt-bindings/reset/xlnx-zynqmp-resets.h> -For list of all valid reset indices for Versal see -<dt-bindings/reset/xlnx-versal-resets.h> - -Example: - -serdes: zynqmp_phy@fd400000 { - ... - - resets = <&zynqmp_reset ZYNQMP_RESET_SATA>; - reset-names = "sata_rst"; - - ... -}; diff --git a/Documentation/devicetree/bindings/reset/xlnx,zynqmp-reset.yaml b/Documentation/devicetree/bindings/reset/xlnx,zynqmp-reset.yaml new file mode 100644 index 000000000000..df207ca22990 --- /dev/null +++ b/Documentation/devicetree/bindings/reset/xlnx,zynqmp-reset.yaml @@ -0,0 +1,67 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/reset/xlnx,zynqmp-reset.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Zynq UltraScale+ MPSoC and Versal reset binding + +maintainers: + - Piyush Mehta <piyush.mehta@amd.com> + +description: | + The Zynq UltraScale+ MPSoC and Versal has several different resets. + + The PS reset subsystem is responsible for handling the external reset + input to the device and that all internal reset requirements are met + for the system (as a whole) and for the functional units. + + Please also refer to reset.txt in this directory for common reset + controller binding usage. Device nodes that need access to reset + lines should specify them as a reset phandle in their corresponding + node as specified in reset.txt. + + For list of all valid reset indices for Zynq UltraScale+ MPSoC + <dt-bindings/reset/xlnx-zynqmp-resets.h> + + For list of all valid reset indices for Versal + <dt-bindings/reset/xlnx-versal-resets.h> + +properties: + compatible: + enum: + - xlnx,zynqmp-reset + - xlnx,versal-reset + + "#reset-cells": + const: 1 + +required: + - compatible + - "#reset-cells" + +additionalProperties: false + +examples: + - | + #include <dt-bindings/reset/xlnx-zynqmp-resets.h> + + firmware { + zynqmp_firmware: zynqmp-firmware { + compatible = "xlnx,zynqmp-firmware"; + method = "smc"; + + zynqmp_reset: reset-controller { + compatible = "xlnx,zynqmp-reset"; + #reset-cells = <1>; + }; + }; + }; + + /* Specifying sata reset control of devices */ + sata { + resets = <&zynqmp_reset ZYNQMP_RESET_SATA>; + reset-names = "sata_rst"; + }; + +...
Convert the binding to DT schema format. It also updates the reset-controller description. Signed-off-by: Piyush Mehta <piyush.mehta@amd.com> --- Note: The 1/2 patch introduced a warning related to the dt binding check, which was subsequently fixed in the 2/2 patch. This warning is a conversion warning due to a dependency on firmware dt binding. Warning: DTC_CHK Documentation/devicetree/bindings/reset/xlnx,zynqmp-reset.example.dtb /scratch/piyushm/torvalds/linux/Documentation/devicetree/bindings/reset/xlnx,zynqmp-reset.example.dtb: zynqmp-firmware: 'reset-controller' does not match any of the regexes: 'pinctrl-[0-9]+' From schema: /scratch/piyushm/torvalds/linux/Documentation/devicetree/bindings/firmware/xilinx/xlnx,zynqmp-firmware.yaml Please suggest to me, if it's fine to make a single patch instead of the separate patch 1/2 and 2/2. --- .../bindings/reset/xlnx,zynqmp-reset.txt | 55 --------------- .../bindings/reset/xlnx,zynqmp-reset.yaml | 67 +++++++++++++++++++ 2 files changed, 67 insertions(+), 55 deletions(-) delete mode 100644 Documentation/devicetree/bindings/reset/xlnx,zynqmp-reset.txt create mode 100644 Documentation/devicetree/bindings/reset/xlnx,zynqmp-reset.yaml