diff mbox series

[RFC,09/10] dt-bindings: display: panel: Describe Sony Xperia 1 display

Message ID 20230521-drm-panels-sony-v1-9-541c341d6bee@somainline.org
State Changes Requested, archived
Headers show
Series drm/panel: Drivers for four Sony CMD-mode (and DSC) panels | expand

Checks

Context Check Description
robh/checkpatch success
robh/patch-applied success
robh/dt-meta-schema fail build log

Commit Message

Marijn Suijten May 21, 2023, 9:23 p.m. UTC
Document an unnamed Samsung Display-IC and 1644x3840@60 6.5" panel found
in the Sony Xperia 1.

Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org>
---
 .../display/panel/sony,griffin-samsung.yaml        | 73 ++++++++++++++++++++++
 1 file changed, 73 insertions(+)

Comments

Rob Herring May 21, 2023, 10:23 p.m. UTC | #1
On Sun, 21 May 2023 23:23:11 +0200, Marijn Suijten wrote:
> Document an unnamed Samsung Display-IC and 1644x3840@60 6.5" panel found
> in the Sony Xperia 1.
> 
> Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org>
> ---
>  .../display/panel/sony,griffin-samsung.yaml        | 73 ++++++++++++++++++++++
>  1 file changed, 73 insertions(+)
> 

My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check'
on your patch (DT_CHECKER_FLAGS is new in v5.13):

yamllint warnings/errors:

dtschema/dtc warnings/errors:
./Documentation/devicetree/bindings/display/panel/sony,griffin-samsung.yaml: $id: relative path/filename doesn't match actual path or filename
	expected: http://devicetree.org/schemas/display/panel/sony,griffin-samsung.yaml#

doc reference errors (make refcheckdocs):

See https://patchwork.ozlabs.org/project/devicetree-bindings/patch/20230521-drm-panels-sony-v1-9-541c341d6bee@somainline.org

The base for the series is generally the latest rc1. A different dependency
should be noted in *this* patch.

If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure 'yamllint' is installed and dt-schema is up to
date:

pip3 install dtschema --upgrade

Please check and re-submit after running the above command yourself. Note
that DT_SCHEMA_FILES can be set to your schema file to speed up checking
your schema. However, it must be unset to test all examples with your schema.
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/display/panel/sony,griffin-samsung.yaml b/Documentation/devicetree/bindings/display/panel/sony,griffin-samsung.yaml
new file mode 100644
index 0000000000000..24059d45331c3
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/panel/sony,griffin-samsung.yaml
@@ -0,0 +1,73 @@ 
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/sony,griffin-samsung-4k-oled.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Sony Xperia 1 Samsung 1644x3840 6.5" OLED DSI panel
+
+maintainers:
+  - Marijn Suijten <marijn.suijten@somainline.org>
+
+description: |
+  Unnamed Samsung Display-IC and panel found in the Sony Xperia 1
+  (kumano griffin) smartphone.
+
+allOf:
+  - $ref: panel-common.yaml#
+
+properties:
+  compatible:
+    enum:
+      - sony,griffin-samsung-4k-oled
+
+  port: true
+
+  reg:
+    maxItems: 1
+    description: DSI virtual channel
+
+  reset-gpios: true
+
+  vci-supply:
+    description: DriverIC Operation supply (3.0V)
+
+  vddio-supply:
+    description: I/O voltage supply (1.8V)
+
+required:
+  - compatible
+  - port
+  - reg
+  - reset-gpios
+  - vci-supply
+  - vddio-supply
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    dsi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        panel@0 {
+            compatible = "sony,griffin-samsung-4k-oled";
+            reg = <0>;
+
+            reset-gpios = <&tlmm 6 GPIO_ACTIVE_LOW>;
+
+            vci-supply = <&vreg_l17a_3p0>;
+            vddio-supply = <&vreg_l14a_1p8>;
+
+            port {
+                endpoint {
+                    remote-endpoint = <&dsi0_out>;
+                };
+            };
+        };
+    };
+
+...
+