| Message ID | 20230510095330.30742-2-tony@atomide.com |
|---|---|
| State | Superseded, archived |
| Headers | show |
| Series | [v4,1/2] dt-bindings: pinctrl: Allow use of pinconf in addition to pinctrl and pinmux | expand |
| Context | Check | Description |
|---|---|---|
| robh/checkpatch | warning | total: 0 errors, 3 warnings, 243 lines checked |
| robh/patch-applied | success | |
| robh/dt-meta-schema | fail | build log |
* Tony Lindgren <tony@atomide.com> [230510 09:54]: > --- /dev/null > +++ b/Documentation/devicetree/bindings/pinctrl/pinctrl-single.yaml ... > +patternProperties: ... > + 'cpsw_default|cpsw_sleep|davinci_mdio_default|davinci_mdio_sleep': > + description: Deprecated legacy naming for cpsw and mdio on TI SoCs > + deprecated: true > + type: object > + $ref: pinmux-node.yaml# > + > + 'usb1_drvvbus|usb_hub_ctrl|usb2_phy': > + description: Deprecated legacy naming for USB on TI SoCs > + deprecated: true > + type: object > + $ref: pinmux-node.yaml# > + > + 'gpio_keys_s0|matrix_keypad_default|matrix_keypad_sleep|matrix_keypad_s0': > + description: Deprecated legacy naming for input on TI SoCs > + deprecated: true > + type: object > + $ref: pinmux-node.yaml# > + > + 'user_leds_s0|gpio_led_pmx': > + description: Deprecated legacy naming for LEDs on TI SoCs > + deprecated: true > + type: object > + $ref: pinmux-node.yaml# > + > + 'nand_flash_x8': > + description: Deprecated legacy naming for NAND on TI SoCs > + deprecated: true > + type: object > + $ref: pinmux-node.yaml# Looks like fixing the pin group node names for all the older TI SoC dts files should not be too bad, for example diffstat for experimental am335x changes is: 42 files changed, 323 insertions(+), 323 deletions(-) This includes changing node names to use - instead of _ while at it. I'll send out about 10 or so patches once Rob has the dts subdirectories created. Regards, Tony
On Wed, 10 May 2023 12:53:29 +0300, Tony Lindgren wrote: > Update binding for yaml and remove the old related txt bindings. Note that > we are also adding the undocumented pinctrl-single,slew-rate property. And > we only use the first example from the old binding. > > Cc: Nishanth Menon <nm@ti.com> > Cc: Vignesh Raghavendra <vigneshr@ti.com> > Signed-off-by: Tony Lindgren <tony@atomide.com> > --- > > Changes since v3: > - Fix issues noted by Rob for v2 version that I had missed > > - Categorize patternProperties a bit to make fixing dts files easier > > Changes since v2: > > - Drop old ti,omap-pinctrl.txt in addition to old pinctrl-single.txt > > - Replace reference to pinctrl-single.txt to point to the yaml in ctrl.txt > > Changes since v1: > > - The v1 version was a WIP patch posted as an example in thread > "dt binding check error with hash and comma" > > --- > .../devicetree/bindings/arm/omap/ctrl.txt | 2 +- > .../bindings/pinctrl/pinctrl-single.txt | 262 ------------------ > .../bindings/pinctrl/pinctrl-single.yaml | 235 ++++++++++++++++ > .../bindings/pinctrl/ti,omap-pinctrl.txt | 13 - > 4 files changed, 236 insertions(+), 276 deletions(-) > delete mode 100644 Documentation/devicetree/bindings/pinctrl/pinctrl-single.txt > create mode 100644 Documentation/devicetree/bindings/pinctrl/pinctrl-single.yaml > delete mode 100644 Documentation/devicetree/bindings/pinctrl/ti,omap-pinctrl.txt > My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check' on your patch (DT_CHECKER_FLAGS is new in v5.13): yamllint warnings/errors: dtschema/dtc warnings/errors: /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/pinctrl/pinctrl-single.yaml: patternProperties: 'i2c1-pmx-func' does not match '[\\^$()*@]' hint: Fixed strings belong in 'properties', not 'patternProperties' from schema $id: http://devicetree.org/meta-schemas/keywords.yaml# /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/pinctrl/pinctrl-single.yaml: patternProperties: '_pmx_func|_pmx_idle|_cfg_func|_cfg_idle|gpio_key_func' does not match '[\\^$()*@]' hint: Fixed strings belong in 'properties', not 'patternProperties' from schema $id: http://devicetree.org/meta-schemas/keywords.yaml# /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/pinctrl/pinctrl-single.yaml: patternProperties: 'cpsw_default|cpsw_sleep|davinci_mdio_default|davinci_mdio_sleep' does not match '[\\^$()*@]' hint: Fixed strings belong in 'properties', not 'patternProperties' from schema $id: http://devicetree.org/meta-schemas/keywords.yaml# /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/pinctrl/pinctrl-single.yaml: patternProperties: 'usb1_drvvbus|usb_hub_ctrl|usb2_phy' does not match '[\\^$()*@]' hint: Fixed strings belong in 'properties', not 'patternProperties' from schema $id: http://devicetree.org/meta-schemas/keywords.yaml# /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/pinctrl/pinctrl-single.yaml: patternProperties: 'gpio_keys_s0|matrix_keypad_default|matrix_keypad_sleep|matrix_keypad_s0' does not match '[\\^$()*@]' hint: Fixed strings belong in 'properties', not 'patternProperties' from schema $id: http://devicetree.org/meta-schemas/keywords.yaml# /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/pinctrl/pinctrl-single.yaml: patternProperties: 'user_leds_s0|gpio_led_pmx' does not match '[\\^$()*@]' hint: Fixed strings belong in 'properties', not 'patternProperties' from schema $id: http://devicetree.org/meta-schemas/keywords.yaml# /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/pinctrl/pinctrl-single.yaml: patternProperties: 'nand_flash_x8' does not match '[\\^$()*@]' hint: Fixed strings belong in 'properties', not 'patternProperties' from schema $id: http://devicetree.org/meta-schemas/keywords.yaml# /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/pinctrl/pinctrl-single.example.dtb: pinmux@4a100040: #pinctrl-cells: [[2]] is not of type 'object' From schema: /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/pinctrl/pinctrl-single.yaml /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/pinctrl/pinctrl-single.example.dtb: pinmux@4a100040: #pinctrl-cells: [[2]] is not of type 'object' From schema: /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/pinctrl/pinctrl-single.yaml /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/pinctrl/pinctrl-single.example.dtb: pinmux@4a100040: pinctrl-single,register-width: [[16]] is not of type 'object' From schema: /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/pinctrl/pinctrl-single.yaml /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/pinctrl/pinctrl-single.example.dtb: pinmux@4a100040: pinctrl-single,register-width: [[16]] is not of type 'object' From schema: /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/pinctrl/pinctrl-single.yaml /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/pinctrl/pinctrl-single.example.dtb: pinmux@4a100040: pinctrl-single,function-mask: [[65535]] is not of type 'object' From schema: /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/pinctrl/pinctrl-single.yaml /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/pinctrl/pinctrl-single.example.dtb: pinmux@4a100040: pinctrl-single,function-mask: [[65535]] is not of type 'object' From schema: /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/pinctrl/pinctrl-single.yaml /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/pinctrl/pinctrl-single.example.dtb: pinmux@4a100040: pinctrl-single,gpio-range: [[1, 0, 3, 0]] is not of type 'object' From schema: /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/pinctrl/pinctrl-single.yaml /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/pinctrl/pinctrl-single.example.dtb: pinmux@4a100040: pinctrl-single,gpio-range: [[1, 0, 3, 0]] is not of type 'object' From schema: /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/pinctrl/pinctrl-single.yaml See https://patchwork.ozlabs.org/patch/1779341 This check can fail if there are any dependencies. The base for a patch series is generally the most recent rc1. If you already ran 'make dt_binding_check' and didn't see the above error(s), then make sure 'yamllint' is installed and dt-schema is up to date: pip3 install dtschema --upgrade Please check and re-submit.
Hi, * Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> [230510 12:48]: > On Wed, 10 May 2023 12:53:29 +0300, Tony Lindgren wrote: > > Update binding for yaml and remove the old related txt bindings. Note that > > we are also adding the undocumented pinctrl-single,slew-rate property. And > > we only use the first example from the old binding. ... > My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check' > on your patch (DT_CHECKER_FLAGS is new in v5.13): > > yamllint warnings/errors: > > dtschema/dtc warnings/errors: > /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/pinctrl/pinctrl-single.example.dtb: pinmux@4a100040: #pinctrl-cells: [[2]] is not of type 'object' > From schema: /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/pinctrl/pinctrl-single.yaml > /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/pinctrl/pinctrl-single.example.dtb: pinmux@4a100040: #pinctrl-cells: [[2]] is not of type 'object' > From schema: /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/pinctrl/pinctrl-single.yaml > /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/pinctrl/pinctrl-single.example.dtb: pinmux@4a100040: pinctrl-single,register-width: [[16]] is not of type 'object' > From schema: /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/pinctrl/pinctrl-single.yaml > /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/pinctrl/pinctrl-single.example.dtb: pinmux@4a100040: pinctrl-single,register-width: [[16]] is not of type 'object' > From schema: /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/pinctrl/pinctrl-single.yaml > /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/pinctrl/pinctrl-single.example.dtb: pinmux@4a100040: pinctrl-single,function-mask: [[65535]] is not of type 'object' > From schema: /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/pinctrl/pinctrl-single.yaml > /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/pinctrl/pinctrl-single.example.dtb: pinmux@4a100040: pinctrl-single,function-mask: [[65535]] is not of type 'object' > From schema: /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/pinctrl/pinctrl-single.yaml > /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/pinctrl/pinctrl-single.example.dtb: pinmux@4a100040: pinctrl-single,gpio-range: [[1, 0, 3, 0]] is not of type 'object' > From schema: /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/pinctrl/pinctrl-single.yaml > /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/pinctrl/pinctrl-single.example.dtb: pinmux@4a100040: pinctrl-single,gpio-range: [[1, 0, 3, 0]] is not of type 'object' > From schema: /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/pinctrl/pinctrl-single.yaml Looks like these are happening because of the patternProperties match for pin, will need to add more patterns like like -pin|_pin instead. Regards, Tony
On 17/05/2023 10:00, Tony Lindgren wrote: > Hi, > > * Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> [230510 12:48]: >> On Wed, 10 May 2023 12:53:29 +0300, Tony Lindgren wrote: >>> Update binding for yaml and remove the old related txt bindings. Note that >>> we are also adding the undocumented pinctrl-single,slew-rate property. And >>> we only use the first example from the old binding. > ... >> My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check' >> on your patch (DT_CHECKER_FLAGS is new in v5.13): >> >> yamllint warnings/errors: >> >> dtschema/dtc warnings/errors: >> /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/pinctrl/pinctrl-single.example.dtb: pinmux@4a100040: #pinctrl-cells: [[2]] is not of type 'object' >> From schema: /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/pinctrl/pinctrl-single.yaml >> /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/pinctrl/pinctrl-single.example.dtb: pinmux@4a100040: #pinctrl-cells: [[2]] is not of type 'object' >> From schema: /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/pinctrl/pinctrl-single.yaml >> /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/pinctrl/pinctrl-single.example.dtb: pinmux@4a100040: pinctrl-single,register-width: [[16]] is not of type 'object' >> From schema: /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/pinctrl/pinctrl-single.yaml >> /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/pinctrl/pinctrl-single.example.dtb: pinmux@4a100040: pinctrl-single,register-width: [[16]] is not of type 'object' >> From schema: /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/pinctrl/pinctrl-single.yaml >> /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/pinctrl/pinctrl-single.example.dtb: pinmux@4a100040: pinctrl-single,function-mask: [[65535]] is not of type 'object' >> From schema: /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/pinctrl/pinctrl-single.yaml >> /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/pinctrl/pinctrl-single.example.dtb: pinmux@4a100040: pinctrl-single,function-mask: [[65535]] is not of type 'object' >> From schema: /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/pinctrl/pinctrl-single.yaml >> /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/pinctrl/pinctrl-single.example.dtb: pinmux@4a100040: pinctrl-single,gpio-range: [[1, 0, 3, 0]] is not of type 'object' >> From schema: /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/pinctrl/pinctrl-single.yaml >> /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/pinctrl/pinctrl-single.example.dtb: pinmux@4a100040: pinctrl-single,gpio-range: [[1, 0, 3, 0]] is not of type 'object' >> From schema: /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/pinctrl/pinctrl-single.yaml > > Looks like these are happening because of the patternProperties match for > pin, will need to add more patterns like like -pin|_pin instead. It would be great if you can change _pin to -pin in all DTS. Underscores are unwelcome. Best regards, Krzysztof
* Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> [230517 08:23]: > On 17/05/2023 10:00, Tony Lindgren wrote: > > Hi, > > > > * Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> [230510 12:48]: > >> On Wed, 10 May 2023 12:53:29 +0300, Tony Lindgren wrote: > >>> Update binding for yaml and remove the old related txt bindings. Note that > >>> we are also adding the undocumented pinctrl-single,slew-rate property. And > >>> we only use the first example from the old binding. > > ... > >> My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check' > >> on your patch (DT_CHECKER_FLAGS is new in v5.13): > >> > >> yamllint warnings/errors: > >> > >> dtschema/dtc warnings/errors: > >> /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/pinctrl/pinctrl-single.example.dtb: pinmux@4a100040: #pinctrl-cells: [[2]] is not of type 'object' > >> From schema: /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/pinctrl/pinctrl-single.yaml > >> /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/pinctrl/pinctrl-single.example.dtb: pinmux@4a100040: #pinctrl-cells: [[2]] is not of type 'object' > >> From schema: /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/pinctrl/pinctrl-single.yaml > >> /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/pinctrl/pinctrl-single.example.dtb: pinmux@4a100040: pinctrl-single,register-width: [[16]] is not of type 'object' > >> From schema: /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/pinctrl/pinctrl-single.yaml > >> /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/pinctrl/pinctrl-single.example.dtb: pinmux@4a100040: pinctrl-single,register-width: [[16]] is not of type 'object' > >> From schema: /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/pinctrl/pinctrl-single.yaml > >> /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/pinctrl/pinctrl-single.example.dtb: pinmux@4a100040: pinctrl-single,function-mask: [[65535]] is not of type 'object' > >> From schema: /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/pinctrl/pinctrl-single.yaml > >> /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/pinctrl/pinctrl-single.example.dtb: pinmux@4a100040: pinctrl-single,function-mask: [[65535]] is not of type 'object' > >> From schema: /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/pinctrl/pinctrl-single.yaml > >> /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/pinctrl/pinctrl-single.example.dtb: pinmux@4a100040: pinctrl-single,gpio-range: [[1, 0, 3, 0]] is not of type 'object' > >> From schema: /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/pinctrl/pinctrl-single.yaml > >> /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/pinctrl/pinctrl-single.example.dtb: pinmux@4a100040: pinctrl-single,gpio-range: [[1, 0, 3, 0]] is not of type 'object' > >> From schema: /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/pinctrl/pinctrl-single.yaml > > > > Looks like these are happening because of the patternProperties match for > > pin, will need to add more patterns like like -pin|_pin instead. > > It would be great if you can change _pin to -pin in all DTS. Underscores > are unwelcome. Yes np, I have a hackish script to change things to use -pins node naming for pin groups. Will send out patches this week. Regards, Tony
diff --git a/Documentation/devicetree/bindings/arm/omap/ctrl.txt b/Documentation/devicetree/bindings/arm/omap/ctrl.txt --- a/Documentation/devicetree/bindings/arm/omap/ctrl.txt +++ b/Documentation/devicetree/bindings/arm/omap/ctrl.txt @@ -8,7 +8,7 @@ control module driver itself. See [2] for documentation about clock/clockdomain nodes. -[1] Documentation/devicetree/bindings/pinctrl/pinctrl-single.txt +[1] Documentation/devicetree/bindings/pinctrl/pinctrl-single.yaml [2] Documentation/devicetree/bindings/clock/ti/* Required properties: diff --git a/Documentation/devicetree/bindings/pinctrl/pinctrl-single.txt b/Documentation/devicetree/bindings/pinctrl/pinctrl-single.txt deleted file mode 100644 --- a/Documentation/devicetree/bindings/pinctrl/pinctrl-single.txt +++ /dev/null @@ -1,262 +0,0 @@ -One-register-per-pin type device tree based pinctrl driver - -Required properties: -- compatible : "pinctrl-single" or "pinconf-single". - "pinctrl-single" means that pinconf isn't supported. - "pinconf-single" means that generic pinconf is supported. - -- reg : offset and length of the register set for the mux registers - -- #pinctrl-cells : number of cells in addition to the index, set to 1 - or 2 for pinctrl-single,pins and set to 2 for pinctrl-single,bits - -- pinctrl-single,register-width : pinmux register access width in bits - -- pinctrl-single,function-mask : mask of allowed pinmux function bits - in the pinmux register - -Optional properties: -- pinctrl-single,function-off : function off mode for disabled state if - available and same for all registers; if not specified, disabling of - pin functions is ignored - -- pinctrl-single,bit-per-mux : boolean to indicate that one register controls - more than one pin, for which "pinctrl-single,function-mask" property specifies - position mask of pin. - -- pinctrl-single,drive-strength : array of value that are used to configure - drive strength in the pinmux register. They're value of drive strength - current and drive strength mask. - - /* drive strength current, mask */ - pinctrl-single,power-source = <0x30 0xf0>; - -- pinctrl-single,bias-pullup : array of value that are used to configure the - input bias pullup in the pinmux register. - - /* input, enabled pullup bits, disabled pullup bits, mask */ - pinctrl-single,bias-pullup = <0 1 0 1>; - -- pinctrl-single,bias-pulldown : array of value that are used to configure the - input bias pulldown in the pinmux register. - - /* input, enabled pulldown bits, disabled pulldown bits, mask */ - pinctrl-single,bias-pulldown = <2 2 0 2>; - - * Two bits to control input bias pullup and pulldown: User should use - pinctrl-single,bias-pullup & pinctrl-single,bias-pulldown. One bit means - pullup, and the other one bit means pulldown. - * Three bits to control input bias enable, pullup and pulldown. User should - use pinctrl-single,bias-pullup & pinctrl-single,bias-pulldown. Input bias - enable bit should be included in pullup or pulldown bits. - * Although driver could set PIN_CONFIG_BIAS_DISABLE, there's no property as - pinctrl-single,bias-disable. Because pinctrl single driver could implement - it by calling pulldown, pullup disabled. - -- pinctrl-single,input-schmitt : array of value that are used to configure - input schmitt in the pinmux register. In some silicons, there're two input - schmitt value (rising-edge & falling-edge) in the pinmux register. - - /* input schmitt value, mask */ - pinctrl-single,input-schmitt = <0x30 0x70>; - -- pinctrl-single,input-schmitt-enable : array of value that are used to - configure input schmitt enable or disable in the pinmux register. - - /* input, enable bits, disable bits, mask */ - pinctrl-single,input-schmitt-enable = <0x30 0x40 0 0x70>; - -- pinctrl-single,low-power-mode : array of value that are used to configure - low power mode of this pin. For some silicons, the low power mode will - control the output of the pin when the pad including the pin enter low - power mode. - /* low power mode value, mask */ - pinctrl-single,low-power-mode = <0x288 0x388>; - -- pinctrl-single,gpio-range : list of value that are used to configure a GPIO - range. They're value of subnode phandle, pin base in pinctrl device, pin - number in this range, GPIO function value of this GPIO range. - The number of parameters is depend on #pinctrl-single,gpio-range-cells - property. - - /* pin base, nr pins & gpio function */ - pinctrl-single,gpio-range = <&range 0 3 0>, <&range 3 9 1>; - -- interrupt-controller : standard interrupt controller binding if using - interrupts for wake-up events for example. In this case pinctrl-single - is set up as a chained interrupt controller and the wake-up interrupts - can be requested by the drivers using request_irq(). - -- #interrupt-cells : standard interrupt binding if using interrupts - -This driver assumes that there is only one register for each pin (unless the -pinctrl-single,bit-per-mux is set), and uses the common pinctrl bindings as -specified in the pinctrl-bindings.txt document in this directory. - -The pin configuration nodes for pinctrl-single are specified as pinctrl -register offset and values using pinctrl-single,pins. Only the bits specified -in pinctrl-single,function-mask are updated. - -When #pinctrl-cells = 1, then setting a pin for a device could be done with: - - pinctrl-single,pins = <0xdc 0x118>; - -Where 0xdc is the offset from the pinctrl register base address for the device -pinctrl register, and 0x118 contains the desired value of the pinctrl register. - -When #pinctrl-cells = 2, then setting a pin for a device could be done with: - - pinctrl-single,pins = <0xdc 0x30 0x07>; - -Where 0x30 is the pin configuration value and 0x07 is the pin mux mode value. -These two values are OR'd together to produce the value stored at offset 0xdc. -See the device example and static board pins example below for more information. - -In case when one register changes more than one pin's mux the -pinctrl-single,bits need to be used which takes three parameters: - - pinctrl-single,bits = <0xdc 0x18 0xff>; - -Where 0xdc is the offset from the pinctrl register base address for the -device pinctrl register, 0x18 is the desired value, and 0xff is the sub mask to -be used when applying this change to the register. - - -Optional sub-node: In case some pins could be configured as GPIO in the pinmux -register, those pins could be defined as a GPIO range. This sub-node is required -by pinctrl-single,gpio-range property. - -Required properties in sub-node: -- #pinctrl-single,gpio-range-cells : the number of parameters after phandle in - pinctrl-single,gpio-range property. - - range: gpio-range { - #pinctrl-single,gpio-range-cells = <3>; - }; - - -Example: - -/* SoC common file */ - -/* first controller instance for pins in core domain */ -pmx_core: pinmux@4a100040 { - compatible = "pinctrl-single"; - reg = <0x4a100040 0x0196>; - #address-cells = <1>; - #size-cells = <0>; - #interrupt-cells = <1>; - interrupt-controller; - pinctrl-single,register-width = <16>; - pinctrl-single,function-mask = <0xffff>; -}; - -/* second controller instance for pins in wkup domain */ -pmx_wkup: pinmux@4a31e040 { - compatible = "pinctrl-single"; - reg = <0x4a31e040 0x0038>; - #address-cells = <1>; - #size-cells = <0>; - #interrupt-cells = <1>; - interrupt-controller; - pinctrl-single,register-width = <16>; - pinctrl-single,function-mask = <0xffff>; -}; - -control_devconf0: pinmux@48002274 { - compatible = "pinctrl-single"; - reg = <0x48002274 4>; /* Single register */ - #address-cells = <1>; - #size-cells = <0>; - pinctrl-single,bit-per-mux; - pinctrl-single,register-width = <32>; - pinctrl-single,function-mask = <0x5F>; -}; - -/* third controller instance for pins in gpio domain */ -pmx_gpio: pinmux@d401e000 { - compatible = "pinconf-single"; - reg = <0xd401e000 0x0330>; - #address-cells = <1>; - #size-cells = <1>; - ranges; - - pinctrl-single,register-width = <32>; - pinctrl-single,function-mask = <7>; - - /* sparse GPIO range could be supported */ - pinctrl-single,gpio-range = <&range 0 3 0>, <&range 3 9 1>, - <&range 12 1 0>, <&range 13 29 1>, - <&range 43 1 0>, <&range 44 49 1>, - <&range 94 1 1>, <&range 96 2 1>; - - range: gpio-range { - #pinctrl-single,gpio-range-cells = <3>; - }; -}; - - -/* board specific .dts file */ - -&pmx_core { - - /* - * map all board specific static pins enabled by the pinctrl driver - * itself during the boot (or just set them up in the bootloader) - */ - pinctrl-names = "default"; - pinctrl-0 = <&board_pins>; - - board_pins: pinmux_board_pins { - pinctrl-single,pins = < - 0x6c 0xf - 0x6e 0xf - 0x70 0xf - 0x72 0xf - >; - }; - - uart0_pins: pinmux_uart0_pins { - pinctrl-single,pins = < - 0x208 0 /* UART0_RXD (IOCFG138) */ - 0x20c 0 /* UART0_TXD (IOCFG139) */ - >; - pinctrl-single,bias-pulldown = <0 2 2>; - pinctrl-single,bias-pullup = <0 1 1>; - }; - - /* map uart2 pins */ - uart2_pins: pinmux_uart2_pins { - pinctrl-single,pins = < - 0xd8 0x118 - 0xda 0 - 0xdc 0x118 - 0xde 0 - >; - }; -}; - -&control_devconf0 { - mcbsp1_pins: pinmux_mcbsp1_pins { - pinctrl-single,bits = < - 0x00 0x18 0x18 /* FSR/CLKR signal from FSX/CLKX pin */ - >; - }; - - mcbsp2_clks_pins: pinmux_mcbsp2_clks_pins { - pinctrl-single,bits = < - 0x00 0x40 0x40 /* McBSP2 CLKS from McBSP_CLKS pin */ - >; - }; - -}; - -&uart1 { - pinctrl-names = "default"; - pinctrl-0 = <&uart0_pins>; -}; - -&uart2 { - pinctrl-names = "default"; - pinctrl-0 = <&uart2_pins>; -}; diff --git a/Documentation/devicetree/bindings/pinctrl/pinctrl-single.yaml b/Documentation/devicetree/bindings/pinctrl/pinctrl-single.yaml new file mode 100644 --- /dev/null +++ b/Documentation/devicetree/bindings/pinctrl/pinctrl-single.yaml @@ -0,0 +1,235 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pinctrl/pinctrl-single.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: One-register-per-pin type device tree based pinctrl driver + +maintainers: + - Tony Lindgren <tony@atomide.com> + +description: + This binding describes pinctrl devices that use one hardware register to + configure each pin. + +properties: + compatible: + oneOf: + - items: + - enum: + - pinctrl-single + - pinconf-single + - items: + - enum: + - ti,am437-padconf + - ti,dra7-padconf + - ti,omap2420-padconf + - ti,omap2430-padconf + - ti,omap3-padconf + - ti,omap4-padconf + - ti,omap5-padconf + - const: pinctrl-single + + reg: + maxItems: 1 + + interrupt-controller: true + + '#interrupt-cells': + const: 1 + + '#address-cells': + const: 1 + + '#size-cells': + const: 0 + + '#pinctrl-cells': + enum: [ 1, 2 ] + + pinctrl-single,bit-per-mux: + description: Optional flag to indicate register controls more than one pin + type: boolean + + pinctrl-single,function-mask: + description: Mask of the allowed register bits + $ref: /schemas/types.yaml#/definitions/uint32 + + pinctrl-single,function-off: + description: Optional function off mode for disabled state + $ref: /schemas/types.yaml#/definitions/uint32 + + pinctrl-single,register-width: + description: Width of pin specific bits in the register + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [ 8, 16, 32 ] + + pinctrl-single,gpio-range: + description: Optional list of pin base, nr pins & gpio function + $ref: /schemas/types.yaml#/definitions/phandle-array + items: + - items: + - description: phandle of a gpio-range node + - description: pin base + - description: number of pins + - description: gpio function + + '#gpio-range-cells': + description: No longer needed, may exist in older files for gpio-ranges + deprecated: true + const: 3 + + gpio-range: + description: Optional node for gpio range cells + type: object + properties: + '#pinctrl-single,gpio-range-cells': + description: Number of gpio range cells + const: 3 + $ref: /schemas/types.yaml#/definitions/uint32 + +patternProperties: + '-pins((.*)?)$|pin': + description: Pin group node name using pins or pin naming + type: object + $ref: pinmux-node.yaml# + + 'i2c1-pmx-func': + description: Deprecated legacy naming used on Altera SoCs + deprecated: true + type: object + $ref: pinmux-node.yaml# + + '_pmx_func|_pmx_idle|_cfg_func|_cfg_idle|gpio_key_func': + description: Deprecated legacy naming on HiSilicon SoCs + deprecated: true + type: object + $ref: pinmux-node.yaml# + + 'cpsw_default|cpsw_sleep|davinci_mdio_default|davinci_mdio_sleep': + description: Deprecated legacy naming for cpsw and mdio on TI SoCs + deprecated: true + type: object + $ref: pinmux-node.yaml# + + 'usb1_drvvbus|usb_hub_ctrl|usb2_phy': + description: Deprecated legacy naming for USB on TI SoCs + deprecated: true + type: object + $ref: pinmux-node.yaml# + + 'gpio_keys_s0|matrix_keypad_default|matrix_keypad_sleep|matrix_keypad_s0': + description: Deprecated legacy naming for input on TI SoCs + deprecated: true + type: object + $ref: pinmux-node.yaml# + + 'user_leds_s0|gpio_led_pmx': + description: Deprecated legacy naming for LEDs on TI SoCs + deprecated: true + type: object + $ref: pinmux-node.yaml# + + 'nand_flash_x8': + description: Deprecated legacy naming for NAND on TI SoCs + deprecated: true + type: object + $ref: pinmux-node.yaml# + + additionalProperties: false + + properties: + pinctrl-single,pins: + description: + Array of pins as described in pinmux-node.yaml for pinctrl-pin-array + $ref: /schemas/types.yaml#/definitions/uint32-array + + pinctrl-single,bias-pullup: + description: Optional bias pull up configuration + $ref: /schemas/types.yaml#/definitions/uint32-array + items: + - description: input + - description: enabled pull up bits + - description: disabled pull up bits + - description: bias pull up mask + + pinctrl-single,bias-pulldown: + description: Optional bias pull down configuration + $ref: /schemas/types.yaml#/definitions/uint32-array + items: + - description: input + - description: enabled pull down bits + - description: disabled pull down bits + - description: bias pull down mask + + pinctrl-single,drive-strength: + description: Optional drive strength configuration + $ref: /schemas/types.yaml#/definitions/uint32-array + items: + - description: drive strength current + - description: drive strength mask + + pinctrl-single,input-schmitt: + description: Optional input schmitt configuration + $ref: /schemas/types.yaml#/definitions/uint32-array + items: + - description: input + - description: enable bits + - description: disable bits + - description: input schmitt mask + + pinctrl-single,low-power-mode: + description: Optional low power mode configuration + $ref: /schemas/types.yaml#/definitions/uint32-array + items: + - description: low power mode value + - description: low power mode mask + + pinctrl-single,slew-rate: + description: Optional slew rate configuration + $ref: /schemas/types.yaml#/definitions/uint32-array + items: + - description: slew rate + - description: slew rate mask + +allOf: + - $ref: pinctrl.yaml# + +required: + - compatible + - reg + - pinctrl-single,register-width + +additionalProperties: false + +examples: + - | + soc { + #address-cells = <1>; + #size-cells = <1>; + + pinmux@4a100040 { + compatible = "pinctrl-single"; + reg = <0x4a100040 0x0196>; + #address-cells = <1>; + #size-cells = <0>; + #pinctrl-cells = <2>; + #interrupt-cells = <1>; + interrupt-controller; + pinctrl-single,register-width = <16>; + pinctrl-single,function-mask = <0xffff>; + pinctrl-single,gpio-range = <&range 0 3 0>; + range: gpio-range { + #pinctrl-single,gpio-range-cells = <3>; + }; + + uart2-pins { + pinctrl-single,pins = + <0xd8 0x118>, + <0xda 0>, + <0xdc 0x118>, + <0xde 0>; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/pinctrl/ti,omap-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/ti,omap-pinctrl.txt deleted file mode 100644 --- a/Documentation/devicetree/bindings/pinctrl/ti,omap-pinctrl.txt +++ /dev/null @@ -1,13 +0,0 @@ -OMAP Pinctrl definitions - -Required properties: -- compatible : Should be one of: - "ti,omap2420-padconf" - OMAP2420 compatible pinctrl - "ti,omap2430-padconf" - OMAP2430 compatible pinctrl - "ti,omap3-padconf" - OMAP3 compatible pinctrl - "ti,omap4-padconf" - OMAP4 compatible pinctrl - "ti,omap5-padconf" - OMAP5 compatible pinctrl - "ti,dra7-padconf" - DRA7 compatible pinctrl - "ti,am437-padconf" - AM437x compatible pinctrl - -See Documentation/devicetree/bindings/pinctrl/pinctrl-single.txt for further details.
Update binding for yaml and remove the old related txt bindings. Note that we are also adding the undocumented pinctrl-single,slew-rate property. And we only use the first example from the old binding. Cc: Nishanth Menon <nm@ti.com> Cc: Vignesh Raghavendra <vigneshr@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com> --- Changes since v3: - Fix issues noted by Rob for v2 version that I had missed - Categorize patternProperties a bit to make fixing dts files easier Changes since v2: - Drop old ti,omap-pinctrl.txt in addition to old pinctrl-single.txt - Replace reference to pinctrl-single.txt to point to the yaml in ctrl.txt Changes since v1: - The v1 version was a WIP patch posted as an example in thread "dt binding check error with hash and comma" --- .../devicetree/bindings/arm/omap/ctrl.txt | 2 +- .../bindings/pinctrl/pinctrl-single.txt | 262 ------------------ .../bindings/pinctrl/pinctrl-single.yaml | 235 ++++++++++++++++ .../bindings/pinctrl/ti,omap-pinctrl.txt | 13 - 4 files changed, 236 insertions(+), 276 deletions(-) delete mode 100644 Documentation/devicetree/bindings/pinctrl/pinctrl-single.txt create mode 100644 Documentation/devicetree/bindings/pinctrl/pinctrl-single.yaml delete mode 100644 Documentation/devicetree/bindings/pinctrl/ti,omap-pinctrl.txt