diff mbox series

[v3,5/7] dt-bindings: soc: starfive: Add StarFive syscon module

Message ID 20230414024157.53203-6-xingyu.wu@starfivetech.com
State Not Applicable, archived
Headers show
Series Add PLL clocks driver for StarFive JH7110 SoC | expand

Checks

Context Check Description
robh/checkpatch success
robh/patch-applied success
robh/dt-meta-schema fail build log

Commit Message

Xingyu Wu April 14, 2023, 2:41 a.m. UTC
From: William Qiu <william.qiu@starfivetech.com>

Add documentation to describe StarFive System Controller Registers.

Signed-off-by: William Qiu <william.qiu@starfivetech.com>
---
 .../soc/starfive/starfive,jh7110-syscon.yaml  | 58 +++++++++++++++++++
 MAINTAINERS                                   |  6 ++
 2 files changed, 64 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/soc/starfive/starfive,jh7110-syscon.yaml

Comments

Rob Herring (Arm) April 14, 2023, 12:37 p.m. UTC | #1
On Fri, 14 Apr 2023 10:41:55 +0800, Xingyu Wu wrote:
> From: William Qiu <william.qiu@starfivetech.com>
> 
> Add documentation to describe StarFive System Controller Registers.
> 
> Signed-off-by: William Qiu <william.qiu@starfivetech.com>
> ---
>  .../soc/starfive/starfive,jh7110-syscon.yaml  | 58 +++++++++++++++++++
>  MAINTAINERS                                   |  6 ++
>  2 files changed, 64 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/soc/starfive/starfive,jh7110-syscon.yaml
> 

My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check'
on your patch (DT_CHECKER_FLAGS is new in v5.13):

yamllint warnings/errors:

dtschema/dtc warnings/errors:
./Documentation/devicetree/bindings/soc/starfive/starfive,jh7110-syscon.yaml: Unable to find schema file matching $id: http://devicetree.org/schemas/clock/starfive,jh7110-pll.yaml

doc reference errors (make refcheckdocs):

See https://patchwork.ozlabs.org/project/devicetree-bindings/patch/20230414024157.53203-6-xingyu.wu@starfivetech.com

The base for the series is generally the latest rc1. A different dependency
should be noted in *this* patch.

If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure 'yamllint' is installed and dt-schema is up to
date:

pip3 install dtschema --upgrade

Please check and re-submit after running the above command yourself. Note
that DT_SCHEMA_FILES can be set to your schema file to speed up checking
your schema. However, it must be unset to test all examples with your schema.
Xingyu Wu April 17, 2023, 7:43 a.m. UTC | #2
On 2023/4/14 20:37, Rob Herring wrote:
> 
> On Fri, 14 Apr 2023 10:41:55 +0800, Xingyu Wu wrote:
>> From: William Qiu <william.qiu@starfivetech.com>
>> 
>> Add documentation to describe StarFive System Controller Registers.
>> 
>> Signed-off-by: William Qiu <william.qiu@starfivetech.com>
>> ---
>>  .../soc/starfive/starfive,jh7110-syscon.yaml  | 58 +++++++++++++++++++
>>  MAINTAINERS                                   |  6 ++
>>  2 files changed, 64 insertions(+)
>>  create mode 100644 Documentation/devicetree/bindings/soc/starfive/starfive,jh7110-syscon.yaml
>> 
> 
> My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check'
> on your patch (DT_CHECKER_FLAGS is new in v5.13):
> 
> yamllint warnings/errors:
> 
> dtschema/dtc warnings/errors:
> ./Documentation/devicetree/bindings/soc/starfive/starfive,jh7110-syscon.yaml: Unable to find schema file matching $id: http://devicetree.org/schemas/clock/starfive,jh7110-pll.yaml
> 
> doc reference errors (make refcheckdocs):
> 
> See https://patchwork.ozlabs.org/project/devicetree-bindings/patch/20230414024157.53203-6-xingyu.wu@starfivetech.com
> 
> The base for the series is generally the latest rc1. A different dependency
> should be noted in *this* patch.
> 
> If you already ran 'make dt_binding_check' and didn't see the above
> error(s), then make sure 'yamllint' is installed and dt-schema is up to
> date:
> 
> pip3 install dtschema --upgrade
> 
> Please check and re-submit after running the above command yourself. Note
> that DT_SCHEMA_FILES can be set to your schema file to speed up checking
> your schema. However, it must be unset to test all examples with your schema.
> 

I have updated yamllint and dtschema, and tested it and didn't see this error.
I asked william and also didn't see this. This error says the file:
http://devicetree.org/schemas/clock/starfive,jh7110-pll.yaml was not found.
This file is added in patch 1 but patch 1 should be applied after these patchset
about JH7110 basic clock drivers. I don't know if that's the reason.

Best regards,
Xingyu Wu
Rob Herring (Arm) April 17, 2023, 8:36 p.m. UTC | #3
On Mon, Apr 17, 2023 at 03:43:48PM +0800, Xingyu Wu wrote:
> On 2023/4/14 20:37, Rob Herring wrote:
> > 
> > On Fri, 14 Apr 2023 10:41:55 +0800, Xingyu Wu wrote:
> >> From: William Qiu <william.qiu@starfivetech.com>
> >> 
> >> Add documentation to describe StarFive System Controller Registers.
> >> 
> >> Signed-off-by: William Qiu <william.qiu@starfivetech.com>
> >> ---
> >>  .../soc/starfive/starfive,jh7110-syscon.yaml  | 58 +++++++++++++++++++
> >>  MAINTAINERS                                   |  6 ++
> >>  2 files changed, 64 insertions(+)
> >>  create mode 100644 Documentation/devicetree/bindings/soc/starfive/starfive,jh7110-syscon.yaml
> >> 
> > 
> > My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check'
> > on your patch (DT_CHECKER_FLAGS is new in v5.13):
> > 
> > yamllint warnings/errors:
> > 
> > dtschema/dtc warnings/errors:
> > ./Documentation/devicetree/bindings/soc/starfive/starfive,jh7110-syscon.yaml: Unable to find schema file matching $id: http://devicetree.org/schemas/clock/starfive,jh7110-pll.yaml
> > 
> > doc reference errors (make refcheckdocs):
> > 
> > See https://patchwork.ozlabs.org/project/devicetree-bindings/patch/20230414024157.53203-6-xingyu.wu@starfivetech.com
> > 
> > The base for the series is generally the latest rc1. A different dependency
> > should be noted in *this* patch.
> > 
> > If you already ran 'make dt_binding_check' and didn't see the above
> > error(s), then make sure 'yamllint' is installed and dt-schema is up to
> > date:
> > 
> > pip3 install dtschema --upgrade
> > 
> > Please check and re-submit after running the above command yourself. Note
> > that DT_SCHEMA_FILES can be set to your schema file to speed up checking
> > your schema. However, it must be unset to test all examples with your schema.
> > 
> 
> I have updated yamllint and dtschema, and tested it and didn't see this error.
> I asked william and also didn't see this. This error says the file:
> http://devicetree.org/schemas/clock/starfive,jh7110-pll.yaml was not found.
> This file is added in patch 1 but patch 1 should be applied after these patchset
> about JH7110 basic clock drivers. I don't know if that's the reason.

Yes, patch 1 could not be applied[1].

Rob

[1] https://patchwork.ozlabs.org/project/devicetree-bindings/patch/20230414024157.53203-2-xingyu.wu@starfivetech.com/
Rob Herring (Arm) April 17, 2023, 8:37 p.m. UTC | #4
On Fri, 14 Apr 2023 10:41:55 +0800, Xingyu Wu wrote:
> From: William Qiu <william.qiu@starfivetech.com>
> 
> Add documentation to describe StarFive System Controller Registers.
> 
> Signed-off-by: William Qiu <william.qiu@starfivetech.com>
> ---
>  .../soc/starfive/starfive,jh7110-syscon.yaml  | 58 +++++++++++++++++++
>  MAINTAINERS                                   |  6 ++
>  2 files changed, 64 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/soc/starfive/starfive,jh7110-syscon.yaml
> 

Reviewed-by: Rob Herring <robh@kernel.org>
Conor Dooley April 24, 2023, 5:15 p.m. UTC | #5
On Fri, Apr 14, 2023 at 10:41:55AM +0800, Xingyu Wu wrote:
> From: William Qiu <william.qiu@starfivetech.com>
> 
> Add documentation to describe StarFive System Controller Registers.
> 
> Signed-off-by: William Qiu <william.qiu@starfivetech.com>
> ---
>  .../soc/starfive/starfive,jh7110-syscon.yaml  | 58 +++++++++++++++++++
>  MAINTAINERS                                   |  6 ++
>  2 files changed, 64 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/soc/starfive/starfive,jh7110-syscon.yaml
> 
> diff --git a/Documentation/devicetree/bindings/soc/starfive/starfive,jh7110-syscon.yaml b/Documentation/devicetree/bindings/soc/starfive/starfive,jh7110-syscon.yaml
> new file mode 100644
> index 000000000000..de086e74a229
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/soc/starfive/starfive,jh7110-syscon.yaml
> @@ -0,0 +1,58 @@
> +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/soc/starfive/starfive,jh7110-syscon.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: StarFive JH7110 SoC system controller
> +
> +maintainers:
> +  - William Qiu <william.qiu@starfivetech.com>
> +
> +description: |
> +  The StarFive JH7110 SoC system controller provides register information such
> +  as offset, mask and shift to configure related modules such as MMC and PCIe.
> +
> +properties:
> +  compatible:
> +    oneOf:
> +      - items:
> +          - enum:
> +              - starfive,jh7110-aon-syscon
> +              - starfive,jh7110-sys-syscon
> +          - const: syscon
> +          - const: simple-mfd
> +      - items:
> +          - const: starfive,jh7110-stg-syscon
> +          - const: syscon
> +
> +  reg:
> +    maxItems: 1
> +
> +  clock-controller:
> +    $ref: /schemas/clock/starfive,jh7110-pll.yaml#
> +    type: object
> +
> +  power-controller:
> +    $ref: /schemas/power/starfive,jh7110-pmu.yaml#
> +    type: object

My plan was to grab this patch after the merge window, but there's been
some back and forth [1] about what exactly should be a power-controller
here. Given the merge window is open & I know Emil wants to look at the
various clock bits for the JH7110, I don't think there's a pressing need
for you to do anything here, but figured I'd at least mention how things
are going on this thread too.

Thanks,
Conor.

1 - https://lore.kernel.org/linux-riscv/20230419035646.43702-1-changhuang.liang@starfivetech.com/T/#m708770e9596098214df769bcc2bdaf9c1a46ca98

> +
> +required:
> +  - compatible
> +  - reg
> +
> +additionalProperties: false
> +
> +examples:
> +  - |
> +    syscon@10240000 {
> +        compatible = "starfive,jh7110-stg-syscon", "syscon";
> +        reg = <0x10240000 0x1000>;
> +    };
> +
> +    syscon@13030000 {
> +        compatible = "starfive,jh7110-sys-syscon", "syscon", "simple-mfd";
> +        reg = <0x13030000 0x1000>;
> +    };
> +
> +...
> diff --git a/MAINTAINERS b/MAINTAINERS
> index 03051ae2e9e5..0fafeea8ebdb 100644
> --- a/MAINTAINERS
> +++ b/MAINTAINERS
> @@ -19917,6 +19917,11 @@ S:	Supported
>  F:	Documentation/devicetree/bindings/clock/starfive,jh7110-pll.yaml
>  F:	drivers/clk/starfive/clk-starfive-jh7110-pll.*
>  
> +STARFIVE JH7110 SYSCON
> +M:	William Qiu <william.qiu@starfivetech.com>
> +S:	Supported
> +F:	Documentation/devicetree/bindings/soc/starfive/starfive,jh7110-syscon.yaml
> +
>  STARFIVE JH71X0 CLOCK DRIVERS
>  M:	Emil Renner Berthing <kernel@esmil.dk>
>  M:	Hal Feng <hal.feng@starfivetech.com>
> @@ -19954,6 +19959,7 @@ STARFIVE SOC DRIVERS
>  M:	Conor Dooley <conor@kernel.org>
>  S:	Maintained
>  T:	git https://git.kernel.org/pub/scm/linux/kernel/git/conor/linux.git/
> +F:	Documentation/devicetree/bindings/soc/starfive/
>  F:	drivers/soc/starfive/
>  
>  STARFIVE TRNG DRIVER
> -- 
> 2.25.1
>
Conor Dooley May 8, 2023, 7:24 p.m. UTC | #6
On Mon, Apr 24, 2023 at 06:15:47PM +0100, Conor Dooley wrote:
> On Fri, Apr 14, 2023 at 10:41:55AM +0800, Xingyu Wu wrote:
> > From: William Qiu <william.qiu@starfivetech.com>
> > 
> > Add documentation to describe StarFive System Controller Registers.
> > 
> > Signed-off-by: William Qiu <william.qiu@starfivetech.com>
> > ---
> >  .../soc/starfive/starfive,jh7110-syscon.yaml  | 58 +++++++++++++++++++
> >  MAINTAINERS                                   |  6 ++
> >  2 files changed, 64 insertions(+)
> >  create mode 100644 Documentation/devicetree/bindings/soc/starfive/starfive,jh7110-syscon.yaml
> > 
> > diff --git a/Documentation/devicetree/bindings/soc/starfive/starfive,jh7110-syscon.yaml b/Documentation/devicetree/bindings/soc/starfive/starfive,jh7110-syscon.yaml
> > new file mode 100644
> > index 000000000000..de086e74a229
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/soc/starfive/starfive,jh7110-syscon.yaml
> > @@ -0,0 +1,58 @@
> > +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
> > +%YAML 1.2
> > +---
> > +$id: http://devicetree.org/schemas/soc/starfive/starfive,jh7110-syscon.yaml#
> > +$schema: http://devicetree.org/meta-schemas/core.yaml#
> > +
> > +title: StarFive JH7110 SoC system controller
> > +
> > +maintainers:
> > +  - William Qiu <william.qiu@starfivetech.com>
> > +
> > +description: |
> > +  The StarFive JH7110 SoC system controller provides register information such
> > +  as offset, mask and shift to configure related modules such as MMC and PCIe.
> > +
> > +properties:
> > +  compatible:
> > +    oneOf:
> > +      - items:
> > +          - enum:
> > +              - starfive,jh7110-aon-syscon
> > +              - starfive,jh7110-sys-syscon
> > +          - const: syscon
> > +          - const: simple-mfd
> > +      - items:
> > +          - const: starfive,jh7110-stg-syscon
> > +          - const: syscon
> > +
> > +  reg:
> > +    maxItems: 1
> > +
> > +  clock-controller:
> > +    $ref: /schemas/clock/starfive,jh7110-pll.yaml#
> > +    type: object
> > +
> > +  power-controller:
> > +    $ref: /schemas/power/starfive,jh7110-pmu.yaml#
> > +    type: object
> 
> My plan was to grab this patch after the merge window, but there's been
> some back and forth [1] about what exactly should be a power-controller
> here. Given the merge window is open & I know Emil wants to look at the
> various clock bits for the JH7110, I don't think there's a pressing need
> for you to do anything here, but figured I'd at least mention how things
> are going on this thread too.

To follow up on this, it transpired in that thread that this node, not a
child node, should be the power controller.

Up to you StarFive folk how you wish to resend, but I am fine with it
being in this series, I shall just not pick up the soc driver patches
until the resent binding is applied by Stephen.

Thanks,
Conor.
Xingyu Wu May 9, 2023, 6:23 a.m. UTC | #7
On 2023/5/9 3:24, Conor Dooley wrote:
> On Mon, Apr 24, 2023 at 06:15:47PM +0100, Conor Dooley wrote:
>> On Fri, Apr 14, 2023 at 10:41:55AM +0800, Xingyu Wu wrote:
>> > From: William Qiu <william.qiu@starfivetech.com>
>> > 
>> > Add documentation to describe StarFive System Controller Registers.
>> > 
>> > Signed-off-by: William Qiu <william.qiu@starfivetech.com>
>> > ---
>> >  .../soc/starfive/starfive,jh7110-syscon.yaml  | 58 +++++++++++++++++++
>> >  MAINTAINERS                                   |  6 ++
>> >  2 files changed, 64 insertions(+)
>> >  create mode 100644 Documentation/devicetree/bindings/soc/starfive/starfive,jh7110-syscon.yaml
>> > 
>> > diff --git a/Documentation/devicetree/bindings/soc/starfive/starfive,jh7110-syscon.yaml b/Documentation/devicetree/bindings/soc/starfive/starfive,jh7110-syscon.yaml
>> > new file mode 100644
>> > index 000000000000..de086e74a229
>> > --- /dev/null
>> > +++ b/Documentation/devicetree/bindings/soc/starfive/starfive,jh7110-syscon.yaml
>> > @@ -0,0 +1,58 @@
>> > +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
>> > +%YAML 1.2
>> > +---
>> > +$id: http://devicetree.org/schemas/soc/starfive/starfive,jh7110-syscon.yaml#
>> > +$schema: http://devicetree.org/meta-schemas/core.yaml#
>> > +
>> > +title: StarFive JH7110 SoC system controller
>> > +
>> > +maintainers:
>> > +  - William Qiu <william.qiu@starfivetech.com>
>> > +
>> > +description: |
>> > +  The StarFive JH7110 SoC system controller provides register information such
>> > +  as offset, mask and shift to configure related modules such as MMC and PCIe.
>> > +
>> > +properties:
>> > +  compatible:
>> > +    oneOf:
>> > +      - items:
>> > +          - enum:
>> > +              - starfive,jh7110-aon-syscon
>> > +              - starfive,jh7110-sys-syscon
>> > +          - const: syscon
>> > +          - const: simple-mfd
>> > +      - items:
>> > +          - const: starfive,jh7110-stg-syscon
>> > +          - const: syscon
>> > +
>> > +  reg:
>> > +    maxItems: 1
>> > +
>> > +  clock-controller:
>> > +    $ref: /schemas/clock/starfive,jh7110-pll.yaml#
>> > +    type: object
>> > +
>> > +  power-controller:
>> > +    $ref: /schemas/power/starfive,jh7110-pmu.yaml#
>> > +    type: object
>> 
>> My plan was to grab this patch after the merge window, but there's been
>> some back and forth [1] about what exactly should be a power-controller
>> here. Given the merge window is open & I know Emil wants to look at the
>> various clock bits for the JH7110, I don't think there's a pressing need
>> for you to do anything here, but figured I'd at least mention how things
>> are going on this thread too.
> 
> To follow up on this, it transpired in that thread that this node, not a
> child node, should be the power controller.
> 
> Up to you StarFive folk how you wish to resend, but I am fine with it
> being in this series, I shall just not pick up the soc driver patches
> until the resent binding is applied by Stephen.
> 

Thanks. I had discussed with changhuang.liang about this. And I will drop
the 'starfive,jh7110-aon-syscon' and 'power-controller' in next patchset.
Changhuang will take these in his patchset.

Best regards,
Xingyu Wu
Conor Dooley May 9, 2023, 6:35 a.m. UTC | #8
On 9 May 2023 07:23:18 IST, Xingyu Wu <xingyu.wu@starfivetech.com> wrote:
>On 2023/5/9 3:24, Conor Dooley wrote:
>> On Mon, Apr 24, 2023 at 06:15:47PM +0100, Conor Dooley wrote:
>>> On Fri, Apr 14, 2023 at 10:41:55AM +0800, Xingyu Wu wrote:
>>> > From: William Qiu <william.qiu@starfivetech.com>
>>> > 
>>> > Add documentation to describe StarFive System Controller Registers.
>>> > 
>>> > Signed-off-by: William Qiu <william.qiu@starfivetech.com>
>>> > ---
>>> >  .../soc/starfive/starfive,jh7110-syscon.yaml  | 58 +++++++++++++++++++
>>> >  MAINTAINERS                                   |  6 ++
>>> >  2 files changed, 64 insertions(+)
>>> >  create mode 100644 Documentation/devicetree/bindings/soc/starfive/starfive,jh7110-syscon.yaml
>>> > 
>>> > diff --git a/Documentation/devicetree/bindings/soc/starfive/starfive,jh7110-syscon.yaml b/Documentation/devicetree/bindings/soc/starfive/starfive,jh7110-syscon.yaml
>>> > new file mode 100644
>>> > index 000000000000..de086e74a229
>>> > --- /dev/null
>>> > +++ b/Documentation/devicetree/bindings/soc/starfive/starfive,jh7110-syscon.yaml
>>> > @@ -0,0 +1,58 @@
>>> > +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
>>> > +%YAML 1.2
>>> > +---
>>> > +$id: http://devicetree.org/schemas/soc/starfive/starfive,jh7110-syscon.yaml#
>>> > +$schema: http://devicetree.org/meta-schemas/core.yaml#
>>> > +
>>> > +title: StarFive JH7110 SoC system controller
>>> > +
>>> > +maintainers:
>>> > +  - William Qiu <william.qiu@starfivetech.com>
>>> > +
>>> > +description: |
>>> > +  The StarFive JH7110 SoC system controller provides register information such
>>> > +  as offset, mask and shift to configure related modules such as MMC and PCIe.
>>> > +
>>> > +properties:
>>> > +  compatible:
>>> > +    oneOf:
>>> > +      - items:
>>> > +          - enum:
>>> > +              - starfive,jh7110-aon-syscon
>>> > +              - starfive,jh7110-sys-syscon
>>> > +          - const: syscon
>>> > +          - const: simple-mfd
>>> > +      - items:
>>> > +          - const: starfive,jh7110-stg-syscon
>>> > +          - const: syscon
>>> > +
>>> > +  reg:
>>> > +    maxItems: 1
>>> > +
>>> > +  clock-controller:
>>> > +    $ref: /schemas/clock/starfive,jh7110-pll.yaml#
>>> > +    type: object
>>> > +
>>> > +  power-controller:
>>> > +    $ref: /schemas/power/starfive,jh7110-pmu.yaml#
>>> > +    type: object
>>> 
>>> My plan was to grab this patch after the merge window, but there's been
>>> some back and forth [1] about what exactly should be a power-controller
>>> here. Given the merge window is open & I know Emil wants to look at the
>>> various clock bits for the JH7110, I don't think there's a pressing need
>>> for you to do anything here, but figured I'd at least mention how things
>>> are going on this thread too.
>> 
>> To follow up on this, it transpired in that thread that this node, not a
>> child node, should be the power controller.
>> 
>> Up to you StarFive folk how you wish to resend, but I am fine with it
>> being in this series, I shall just not pick up the soc driver patches
>> until the resent binding is applied by Stephen.
>> 
>
>Thanks. I had discussed with changhuang.liang about this. And I will drop
>the 'starfive,jh7110-aon-syscon' and 'power-controller' in next patchset.
>Changhuang will take these in his patchset.

Won't that result in broken bindings, since there's a ref to the pll binding?
Keeping it in the same series (i.e. this one) makes
the most sense to me.

Cheers,
Conor.

>
>Best regards,
>Xingyu Wu
>
Xingyu Wu May 9, 2023, 6:52 a.m. UTC | #9
On 2023/5/9 14:35, Conor Dooley wrote:
> 
> 
> On 9 May 2023 07:23:18 IST, Xingyu Wu <xingyu.wu@starfivetech.com> wrote:
>>On 2023/5/9 3:24, Conor Dooley wrote:
>>> On Mon, Apr 24, 2023 at 06:15:47PM +0100, Conor Dooley wrote:
>>>> On Fri, Apr 14, 2023 at 10:41:55AM +0800, Xingyu Wu wrote:
>>>> > From: William Qiu <william.qiu@starfivetech.com>
>>>> > 
>>>> > Add documentation to describe StarFive System Controller Registers.
>>>> > 
>>>> > Signed-off-by: William Qiu <william.qiu@starfivetech.com>
>>>> > ---
>>>> >  .../soc/starfive/starfive,jh7110-syscon.yaml  | 58 +++++++++++++++++++
>>>> >  MAINTAINERS                                   |  6 ++
>>>> >  2 files changed, 64 insertions(+)
>>>> >  create mode 100644 Documentation/devicetree/bindings/soc/starfive/starfive,jh7110-syscon.yaml
>>>> > 
>>>> > diff --git a/Documentation/devicetree/bindings/soc/starfive/starfive,jh7110-syscon.yaml b/Documentation/devicetree/bindings/soc/starfive/starfive,jh7110-syscon.yaml
>>>> > new file mode 100644
>>>> > index 000000000000..de086e74a229
>>>> > --- /dev/null
>>>> > +++ b/Documentation/devicetree/bindings/soc/starfive/starfive,jh7110-syscon.yaml
>>>> > @@ -0,0 +1,58 @@
>>>> > +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
>>>> > +%YAML 1.2
>>>> > +---
>>>> > +$id: http://devicetree.org/schemas/soc/starfive/starfive,jh7110-syscon.yaml#
>>>> > +$schema: http://devicetree.org/meta-schemas/core.yaml#
>>>> > +
>>>> > +title: StarFive JH7110 SoC system controller
>>>> > +
>>>> > +maintainers:
>>>> > +  - William Qiu <william.qiu@starfivetech.com>
>>>> > +
>>>> > +description: |
>>>> > +  The StarFive JH7110 SoC system controller provides register information such
>>>> > +  as offset, mask and shift to configure related modules such as MMC and PCIe.
>>>> > +
>>>> > +properties:
>>>> > +  compatible:
>>>> > +    oneOf:
>>>> > +      - items:
>>>> > +          - enum:
>>>> > +              - starfive,jh7110-aon-syscon
>>>> > +              - starfive,jh7110-sys-syscon
>>>> > +          - const: syscon
>>>> > +          - const: simple-mfd
>>>> > +      - items:
>>>> > +          - const: starfive,jh7110-stg-syscon
>>>> > +          - const: syscon
>>>> > +
>>>> > +  reg:
>>>> > +    maxItems: 1
>>>> > +
>>>> > +  clock-controller:
>>>> > +    $ref: /schemas/clock/starfive,jh7110-pll.yaml#
>>>> > +    type: object
>>>> > +
>>>> > +  power-controller:
>>>> > +    $ref: /schemas/power/starfive,jh7110-pmu.yaml#
>>>> > +    type: object
>>>> 
>>>> My plan was to grab this patch after the merge window, but there's been
>>>> some back and forth [1] about what exactly should be a power-controller
>>>> here. Given the merge window is open & I know Emil wants to look at the
>>>> various clock bits for the JH7110, I don't think there's a pressing need
>>>> for you to do anything here, but figured I'd at least mention how things
>>>> are going on this thread too.
>>> 
>>> To follow up on this, it transpired in that thread that this node, not a
>>> child node, should be the power controller.
>>> 
>>> Up to you StarFive folk how you wish to resend, but I am fine with it
>>> being in this series, I shall just not pick up the soc driver patches
>>> until the resent binding is applied by Stephen.
>>> 
>>
>>Thanks. I had discussed with changhuang.liang about this. And I will drop
>>the 'starfive,jh7110-aon-syscon' and 'power-controller' in next patchset.
>>Changhuang will take these in his patchset.
> 
> Won't that result in broken bindings, since there's a ref to the pll binding?
> Keeping it in the same series (i.e. this one) makes
> the most sense to me.
> 

I will keep the 'sys-syscon' and 'stg-syscon'. The ref just follows the 'sys-syscon'
so I also keep it and the pll binding.
I also hope to add the 'aon-syscon' in this same series but it should be the power
controller, so I have to give up it.

Best regards,
Xingyu Wu
Xingyu Wu May 11, 2023, 6:59 a.m. UTC | #10
On 2023/5/9 14:52, Xingyu Wu wrote:
> On 2023/5/9 14:35, Conor Dooley wrote:
>> 
>> 
>> On 9 May 2023 07:23:18 IST, Xingyu Wu <xingyu.wu@starfivetech.com> wrote:
>>>On 2023/5/9 3:24, Conor Dooley wrote:
>>>> On Mon, Apr 24, 2023 at 06:15:47PM +0100, Conor Dooley wrote:
>>>>> On Fri, Apr 14, 2023 at 10:41:55AM +0800, Xingyu Wu wrote:
>>>>> > From: William Qiu <william.qiu@starfivetech.com>
>>>>> > 
>>>>> > Add documentation to describe StarFive System Controller Registers.
>>>>> > 
>>>>> > Signed-off-by: William Qiu <william.qiu@starfivetech.com>
>>>>> > ---
>>>>> >  .../soc/starfive/starfive,jh7110-syscon.yaml  | 58 +++++++++++++++++++
>>>>> >  MAINTAINERS                                   |  6 ++
>>>>> >  2 files changed, 64 insertions(+)
>>>>> >  create mode 100644 Documentation/devicetree/bindings/soc/starfive/starfive,jh7110-syscon.yaml
>>>>> > 
>>>>> > diff --git a/Documentation/devicetree/bindings/soc/starfive/starfive,jh7110-syscon.yaml b/Documentation/devicetree/bindings/soc/starfive/starfive,jh7110-syscon.yaml
>>>>> > new file mode 100644
>>>>> > index 000000000000..de086e74a229
>>>>> > --- /dev/null
>>>>> > +++ b/Documentation/devicetree/bindings/soc/starfive/starfive,jh7110-syscon.yaml
>>>>> > @@ -0,0 +1,58 @@
>>>>> > +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
>>>>> > +%YAML 1.2
>>>>> > +---
>>>>> > +$id: http://devicetree.org/schemas/soc/starfive/starfive,jh7110-syscon.yaml#
>>>>> > +$schema: http://devicetree.org/meta-schemas/core.yaml#
>>>>> > +
>>>>> > +title: StarFive JH7110 SoC system controller
>>>>> > +
>>>>> > +maintainers:
>>>>> > +  - William Qiu <william.qiu@starfivetech.com>
>>>>> > +
>>>>> > +description: |
>>>>> > +  The StarFive JH7110 SoC system controller provides register information such
>>>>> > +  as offset, mask and shift to configure related modules such as MMC and PCIe.
>>>>> > +
>>>>> > +properties:
>>>>> > +  compatible:
>>>>> > +    oneOf:
>>>>> > +      - items:
>>>>> > +          - enum:
>>>>> > +              - starfive,jh7110-aon-syscon
>>>>> > +              - starfive,jh7110-sys-syscon
>>>>> > +          - const: syscon
>>>>> > +          - const: simple-mfd
>>>>> > +      - items:
>>>>> > +          - const: starfive,jh7110-stg-syscon
>>>>> > +          - const: syscon
>>>>> > +
>>>>> > +  reg:
>>>>> > +    maxItems: 1
>>>>> > +
>>>>> > +  clock-controller:
>>>>> > +    $ref: /schemas/clock/starfive,jh7110-pll.yaml#
>>>>> > +    type: object
>>>>> > +
>>>>> > +  power-controller:
>>>>> > +    $ref: /schemas/power/starfive,jh7110-pmu.yaml#
>>>>> > +    type: object
>>>>> 
>>>>> My plan was to grab this patch after the merge window, but there's been
>>>>> some back and forth [1] about what exactly should be a power-controller
>>>>> here. Given the merge window is open & I know Emil wants to look at the
>>>>> various clock bits for the JH7110, I don't think there's a pressing need
>>>>> for you to do anything here, but figured I'd at least mention how things
>>>>> are going on this thread too.
>>>> 
>>>> To follow up on this, it transpired in that thread that this node, not a
>>>> child node, should be the power controller.
>>>> 
>>>> Up to you StarFive folk how you wish to resend, but I am fine with it
>>>> being in this series, I shall just not pick up the soc driver patches
>>>> until the resent binding is applied by Stephen.
>>>> 
>>>
>>>Thanks. I had discussed with changhuang.liang about this. And I will drop
>>>the 'starfive,jh7110-aon-syscon' and 'power-controller' in next patchset.
>>>Changhuang will take these in his patchset.
>> 
>> Won't that result in broken bindings, since there's a ref to the pll binding?
>> Keeping it in the same series (i.e. this one) makes
>> the most sense to me.
>> 
> 
> I will keep the 'sys-syscon' and 'stg-syscon'. The ref just follows the 'sys-syscon'
> so I also keep it and the pll binding.
> I also hope to add the 'aon-syscon' in this same series but it should be the power
> controller, so I have to give up it.
> 

I synchronized with Chang Huang. It is decided to keep 'aon-syscon' as the power
controller in this and do not add child node in 'aon-syscon'.
And I will update it in the next version of patch.

Best regards,
Xingyu Wu
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/soc/starfive/starfive,jh7110-syscon.yaml b/Documentation/devicetree/bindings/soc/starfive/starfive,jh7110-syscon.yaml
new file mode 100644
index 000000000000..de086e74a229
--- /dev/null
+++ b/Documentation/devicetree/bindings/soc/starfive/starfive,jh7110-syscon.yaml
@@ -0,0 +1,58 @@ 
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/soc/starfive/starfive,jh7110-syscon.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: StarFive JH7110 SoC system controller
+
+maintainers:
+  - William Qiu <william.qiu@starfivetech.com>
+
+description: |
+  The StarFive JH7110 SoC system controller provides register information such
+  as offset, mask and shift to configure related modules such as MMC and PCIe.
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - enum:
+              - starfive,jh7110-aon-syscon
+              - starfive,jh7110-sys-syscon
+          - const: syscon
+          - const: simple-mfd
+      - items:
+          - const: starfive,jh7110-stg-syscon
+          - const: syscon
+
+  reg:
+    maxItems: 1
+
+  clock-controller:
+    $ref: /schemas/clock/starfive,jh7110-pll.yaml#
+    type: object
+
+  power-controller:
+    $ref: /schemas/power/starfive,jh7110-pmu.yaml#
+    type: object
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    syscon@10240000 {
+        compatible = "starfive,jh7110-stg-syscon", "syscon";
+        reg = <0x10240000 0x1000>;
+    };
+
+    syscon@13030000 {
+        compatible = "starfive,jh7110-sys-syscon", "syscon", "simple-mfd";
+        reg = <0x13030000 0x1000>;
+    };
+
+...
diff --git a/MAINTAINERS b/MAINTAINERS
index 03051ae2e9e5..0fafeea8ebdb 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -19917,6 +19917,11 @@  S:	Supported
 F:	Documentation/devicetree/bindings/clock/starfive,jh7110-pll.yaml
 F:	drivers/clk/starfive/clk-starfive-jh7110-pll.*
 
+STARFIVE JH7110 SYSCON
+M:	William Qiu <william.qiu@starfivetech.com>
+S:	Supported
+F:	Documentation/devicetree/bindings/soc/starfive/starfive,jh7110-syscon.yaml
+
 STARFIVE JH71X0 CLOCK DRIVERS
 M:	Emil Renner Berthing <kernel@esmil.dk>
 M:	Hal Feng <hal.feng@starfivetech.com>
@@ -19954,6 +19959,7 @@  STARFIVE SOC DRIVERS
 M:	Conor Dooley <conor@kernel.org>
 S:	Maintained
 T:	git https://git.kernel.org/pub/scm/linux/kernel/git/conor/linux.git/
+F:	Documentation/devicetree/bindings/soc/starfive/
 F:	drivers/soc/starfive/
 
 STARFIVE TRNG DRIVER