Message ID | 20230318121828.739424-4-bryan.odonoghue@linaro.org |
---|---|
State | Not Applicable, archived |
Headers | show |
Series | [v4,01/18] dt-bindings: regulator: qcom,usb-vbus-regulator: Mark reg as required | expand |
Context | Check | Description |
---|---|---|
robh/checkpatch | success | |
robh/patch-applied | success | |
robh/dtbs-check | warning | build log |
robh/dt-meta-schema | success |
On 18/03/2023 13:18, Bryan O'Donoghue wrote: > orientation-switch it the standard declaration to inform the Type-C mux > layer that a remote-endpoint is capable of processing orientation change > messages. > > Add as an optional since not all versions of the dp-phy currently support > the orientation-switch. Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Best regards, Krzysztof
diff --git a/Documentation/devicetree/bindings/phy/qcom,sc7180-qmp-usb3-dp-phy.yaml b/Documentation/devicetree/bindings/phy/qcom,sc7180-qmp-usb3-dp-phy.yaml index 0ef2c9b9d4669..52886cdb0e506 100644 --- a/Documentation/devicetree/bindings/phy/qcom,sc7180-qmp-usb3-dp-phy.yaml +++ b/Documentation/devicetree/bindings/phy/qcom,sc7180-qmp-usb3-dp-phy.yaml @@ -61,6 +61,10 @@ properties: power-domains: maxItems: 1 + orientation-switch: + description: Flag the port as possible handler of orientation switching + type: boolean + resets: items: - description: reset of phy block.
orientation-switch it the standard declaration to inform the Type-C mux layer that a remote-endpoint is capable of processing orientation change messages. Add as an optional since not all versions of the dp-phy currently support the orientation-switch. Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> --- .../devicetree/bindings/phy/qcom,sc7180-qmp-usb3-dp-phy.yaml | 4 ++++ 1 file changed, 4 insertions(+)