| Message ID | 20230302134922.1120217-2-linux@rasmusvillemoes.dk |
|---|---|
| State | Changes Requested, archived |
| Headers | show |
| Series | iio: ad74413r: allow setting sink current for digital input | expand |
| Context | Check | Description |
|---|---|---|
| robh/checkpatch | success | |
| robh/patch-applied | success | |
| robh/dt-meta-schema | fail | build log |
On Thu, 02 Mar 2023 14:49:20 +0100, Rasmus Villemoes wrote: > Depending on the actual hardware wired up to a digital input channel, > it may be necessary to configure the ad74413r to sink a small > current. For example, in the case of a simple mechanical switch, the > charge on the external 68 nF capacitor (cf. the data sheet's Figure > 34) will keep the channel as reading high even after the switch is > turned off again. > > Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk> > --- > .../devicetree/bindings/iio/addac/adi,ad74413r.yaml | 10 ++++++++++ > 1 file changed, 10 insertions(+) > My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check' on your patch (DT_CHECKER_FLAGS is new in v5.13): yamllint warnings/errors: dtschema/dtc warnings/errors: /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/iio/addac/adi,ad74413r.yaml: patternProperties:^channel@[0-3]$:properties:drive-strength-microamp: '$ref' should not be valid under {'const': '$ref'} hint: Standard unit suffix properties don't need a type $ref from schema $id: http://devicetree.org/meta-schemas/core.yaml# doc reference errors (make refcheckdocs): See https://patchwork.ozlabs.org/project/devicetree-bindings/patch/20230302134922.1120217-2-linux@rasmusvillemoes.dk The base for the series is generally the latest rc1. A different dependency should be noted in *this* patch. If you already ran 'make dt_binding_check' and didn't see the above error(s), then make sure 'yamllint' is installed and dt-schema is up to date: pip3 install dtschema --upgrade Please check and re-submit after running the above command yourself. Note that DT_SCHEMA_FILES can be set to your schema file to speed up checking your schema. However, it must be unset to test all examples with your schema.
diff --git a/Documentation/devicetree/bindings/iio/addac/adi,ad74413r.yaml b/Documentation/devicetree/bindings/iio/addac/adi,ad74413r.yaml index 9eb3ecc8bbc8..fcae300182f7 100644 --- a/Documentation/devicetree/bindings/iio/addac/adi,ad74413r.yaml +++ b/Documentation/devicetree/bindings/iio/addac/adi,ad74413r.yaml @@ -101,6 +101,16 @@ patternProperties: When not configured as a comparator, the GPO will be treated as an output-only GPIO. + drive-strength-microamp: + $ref: /schemas/types.yaml#/definitions/uint32 + description: | + For channels configured as digital input, this configures the sink + current. + minimum: 0 + maximum: 1800 + default: 0 + multipleOf: 120 + required: - reg
Depending on the actual hardware wired up to a digital input channel, it may be necessary to configure the ad74413r to sink a small current. For example, in the case of a simple mechanical switch, the charge on the external 68 nF capacitor (cf. the data sheet's Figure 34) will keep the channel as reading high even after the switch is turned off again. Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk> --- .../devicetree/bindings/iio/addac/adi,ad74413r.yaml | 10 ++++++++++ 1 file changed, 10 insertions(+)