| Message ID | 20230217-topic-cpr3h-v10-3-67aed8fdfa61@linaro.org |
|---|---|
| State | Changes Requested, archived |
| Headers | show |
| Series | Add support for Core Power Reduction v3, v4 and Hardened | expand |
| Context | Check | Description |
|---|---|---|
| robh/checkpatch | success | |
| robh/patch-applied | success | |
| robh/dt-meta-schema | fail | build log |
On Fri, 17 Feb 2023 12:08:26 +0100, Konrad Dybcio wrote: > From: AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org> > > Add the bindings for the CPR3 driver to the documentation. > > Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org> > [Konrad: Make binding check pass; update AGdR's email] > Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org> > --- > .../devicetree/bindings/soc/qcom/qcom,cpr3.yaml | 299 +++++++++++++++++++++ > 1 file changed, 299 insertions(+) > My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check' on your patch (DT_CHECKER_FLAGS is new in v5.13): yamllint warnings/errors: dtschema/dtc warnings/errors: /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/soc/qcom/qcom,cpr3.example.dtb: opp-table-cprh: opp-1: 'qcom,opp-cloop-vadj', 'qcom,opp-oloop-vadj' do not match any of the regexes: 'pinctrl-[0-9]+' From schema: /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/opp/opp-v2-qcom-level.yaml /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/soc/qcom/qcom,cpr3.example.dtb: opp-table-cprh: opp-2: 'qcom,opp-cloop-vadj', 'qcom,opp-oloop-vadj' do not match any of the regexes: 'pinctrl-[0-9]+' From schema: /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/opp/opp-v2-qcom-level.yaml /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/soc/qcom/qcom,cpr3.example.dtb: opp-table-cprh: opp-3: 'qcom,opp-cloop-vadj', 'qcom,opp-oloop-vadj' do not match any of the regexes: 'pinctrl-[0-9]+' From schema: /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/opp/opp-v2-qcom-level.yaml /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/soc/qcom/qcom,cpr3.example.dtb: opp-table-cprh: opp-3:qcom,opp-fuse-level:0: [2, 3] is too long From schema: /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/opp/opp-v2-qcom-level.yaml doc reference errors (make refcheckdocs): See https://patchwork.ozlabs.org/project/devicetree-bindings/patch/20230217-topic-cpr3h-v10-3-67aed8fdfa61@linaro.org The base for the series is generally the latest rc1. A different dependency should be noted in *this* patch. If you already ran 'make dt_binding_check' and didn't see the above error(s), then make sure 'yamllint' is installed and dt-schema is up to date: pip3 install dtschema --upgrade Please check and re-submit after running the above command yourself. Note that DT_SCHEMA_FILES can be set to your schema file to speed up checking your schema. However, it must be unset to test all examples with your schema.
On 17.02.2023 14:47, Rob Herring wrote: > > On Fri, 17 Feb 2023 12:08:26 +0100, Konrad Dybcio wrote: >> From: AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org> >> >> Add the bindings for the CPR3 driver to the documentation. >> >> Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org> >> [Konrad: Make binding check pass; update AGdR's email] >> Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org> >> --- >> .../devicetree/bindings/soc/qcom/qcom,cpr3.yaml | 299 +++++++++++++++++++++ >> 1 file changed, 299 insertions(+) >> > > My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check' > on your patch (DT_CHECKER_FLAGS is new in v5.13): > > yamllint warnings/errors: > > dtschema/dtc warnings/errors: > /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/soc/qcom/qcom,cpr3.example.dtb: opp-table-cprh: opp-1: 'qcom,opp-cloop-vadj', 'qcom,opp-oloop-vadj' do not match any of the regexes: 'pinctrl-[0-9]+' > From schema: /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/opp/opp-v2-qcom-level.yaml > /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/soc/qcom/qcom,cpr3.example.dtb: opp-table-cprh: opp-2: 'qcom,opp-cloop-vadj', 'qcom,opp-oloop-vadj' do not match any of the regexes: 'pinctrl-[0-9]+' > From schema: /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/opp/opp-v2-qcom-level.yaml > /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/soc/qcom/qcom,cpr3.example.dtb: opp-table-cprh: opp-3: 'qcom,opp-cloop-vadj', 'qcom,opp-oloop-vadj' do not match any of the regexes: 'pinctrl-[0-9]+' That's added in the previous patch > From schema: /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/opp/opp-v2-qcom-level.yaml > /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/soc/qcom/qcom,cpr3.example.dtb: opp-table-cprh: opp-3:qcom,opp-fuse-level:0: [2, 3] is too lonAnd that's fixed in https://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm.git/commit/?h=opp/linux-next&id=68d8ad3bd9c397f2bf009368cb13e48cb91ea018 Konrad > From schema: /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/opp/opp-v2-qcom-level.yaml > > doc reference errors (make refcheckdocs): > > See https://patchwork.ozlabs.org/project/devicetree-bindings/patch/20230217-topic-cpr3h-v10-3-67aed8fdfa61@linaro.org > > The base for the series is generally the latest rc1. A different dependency > should be noted in *this* patch. > > If you already ran 'make dt_binding_check' and didn't see the above > error(s), then make sure 'yamllint' is installed and dt-schema is up to > date: > > pip3 install dtschema --upgrade > > Please check and re-submit after running the above command yourself. Note > that DT_SCHEMA_FILES can be set to your schema file to speed up checking > your schema. However, it must be unset to test all examples with your schema. >
On Fri, Feb 17, 2023 at 12:08:26PM +0100, Konrad Dybcio wrote: > From: AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org> > > Add the bindings for the CPR3 driver to the documentation. > > Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org> > [Konrad: Make binding check pass; update AGdR's email] > Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org> > --- > .../devicetree/bindings/soc/qcom/qcom,cpr3.yaml | 299 +++++++++++++++++++++ > 1 file changed, 299 insertions(+) > > diff --git a/Documentation/devicetree/bindings/soc/qcom/qcom,cpr3.yaml b/Documentation/devicetree/bindings/soc/qcom/qcom,cpr3.yaml > new file mode 100644 > index 000000000000..18366c1e58b9 > --- /dev/null > +++ b/Documentation/devicetree/bindings/soc/qcom/qcom,cpr3.yaml > @@ -0,0 +1,299 @@ > +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) > +%YAML 1.2 > +--- > +$id: "http://devicetree.org/schemas/soc/qcom/qcom,cpr3.yaml#" > +$schema: "http://devicetree.org/meta-schemas/core.yaml#" > + > +title: Qualcomm Core Power Reduction v3/v4/Hardened (CPR3, CPR4, CPRh) > + > +description: | Don't need '|' > + CPR (Core Power Reduction) is a technology to reduce core power on a CPU > + or other device. Each OPP of a device corresponds to a "corner" that has > + a range of valid voltages for a particular frequency. While the device is > + running at a particular frequency, CPR monitors dynamic factors such as > + temperature, etc. and suggests or, in the CPR-Hardened case performs, > + adjustments to the voltage to save power and meet silicon characteristic > + requirements. > + > +maintainers: > + - AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> > + > +properties: > + compatible: > + oneOf: > + - description: CPRv3 controller > + items: > + - const: qcom,cpr3 > + - description: CPRv4 controller > + items: > + - const: qcom,cpr4 > + - description: CPRv4-Hardened controller > + items: > + - enum: > + - qcom,msm8998-cprh > + - qcom,sdm630-cprh > + - const: qcom,cprh > + > + reg: > + description: Base address and size of the CPR controller(s) > + minItems: 1 > + maxItems: 2 > + > + interrupts: > + maxItems: 1 > + > + clock-names: > + items: > + - const: "ref" Drop quotes. Or perhaps the whole property as you don't need -names when there is only 1. > + > + clocks: > + items: > + - description: CPR reference clock > + > + vdd-supply: > + description: Autonomous Phase Control (APC) or other power supply > + > + '#power-domain-cells': > + const: 1 > + > + acc-syscon: qcom,acc > + $ref: /schemas/types.yaml#/definitions/phandle > + description: phandle to syscon for writing ACC settings > + > + nvmem-cells: > + description: Cells containing the fuse corners and revision data > + minItems: 10 > + maxItems: 32 > + > + nvmem-cell-names: > + minItems: 10 > + maxItems: 32 > + > + operating-points-v2: true > + > + power-domains: true > + > +required: > + - compatible > + - reg > + - clocks > + - clock-names > + - operating-points-v2 > + - "#power-domain-cells" > + - nvmem-cells > + - nvmem-cell-names > + > +additionalProperties: false > + > +allOf: > + - if: > + properties: > + compatible: > + contains: > + enum: > + - qcom,msm8998-cprh > + then: > + properties: > + nvmem-cell-names: > + items: > + - const: "cpr_speed_bin" > + - const: "cpr_fuse_revision" > + - const: "cpr0_quotient1" > + - const: "cpr0_quotient2" > + - const: "cpr0_quotient3" > + - const: "cpr0_quotient4" > + - const: "cpr0_quotient_offset2" > + - const: "cpr0_quotient_offset3" > + - const: "cpr0_quotient_offset4" > + - const: "cpr0_init_voltage1" > + - const: "cpr0_init_voltage2" > + - const: "cpr0_init_voltage3" > + - const: "cpr0_init_voltage4" > + - const: "cpr0_ring_osc1" > + - const: "cpr0_ring_osc2" > + - const: "cpr0_ring_osc3" > + - const: "cpr0_ring_osc4" > + - const: "cpr1_quotient1" > + - const: "cpr1_quotient2" > + - const: "cpr1_quotient3" > + - const: "cpr1_quotient4" > + - const: "cpr1_quotient_offset2" > + - const: "cpr1_quotient_offset3" > + - const: "cpr1_quotient_offset4" > + - const: "cpr1_init_voltage1" > + - const: "cpr1_init_voltage2" > + - const: "cpr1_init_voltage3" > + - const: "cpr1_init_voltage4" > + - const: "cpr1_ring_osc1" > + - const: "cpr1_ring_osc2" > + - const: "cpr1_ring_osc3" > + - const: "cpr1_ring_osc4" Drop quotes. > + > +examples: > + - | > + #include <dt-bindings/clock/qcom,gcc-msm8998.h> > + #include <dt-bindings/interrupt-controller/irq.h> > + > + cpus { > + #address-cells = <2>; > + #size-cells = <0>; > + > + cpu@0 { > + compatible = "qcom,kryo280"; > + device_type = "cpu"; > + reg = <0x0 0x0>; > + operating-points-v2 = <&cpu_gold_opp_table>; > + power-domains = <&apc_cprh 0>; > + power-domain-names = "cprh"; > + }; > + > + cpu@100 { > + compatible = "qcom,kryo280"; > + device_type = "cpu"; > + reg = <0x0 0x100>; > + operating-points-v2 = <&cpu_silver_opp_table>; > + power-domains = <&apc_cprh 1>; > + power-domain-names = "cprh"; > + }; > + }; > + > + cpu0_opp_table: opp-table-cpu0 { This label and what cpu@0 point to don't match. > + compatible = "operating-points-v2"; > + opp-shared; > + > + opp-1843200000 { > + opp-hz = /bits/ 64 <1843200000>; > + required-opps = <&cprh_opp3>; > + }; > + > + opp-1094400000 { > + opp-hz = /bits/ 64 <1094400000>; > + required-opps = <&cprh_opp2>; > + }; > + > + opp-300000000 { > + opp-hz = /bits/ 64 <300000000>; > + required-opps = <&cprh_opp1>; > + }; > + }; > + > + cpu4_opp_table: opp-table-cpu4 { > + compatible = "operating-points-v2"; > + opp-shared; > + > + opp-2208000000 { > + opp-hz = /bits/ 64 <2208000000>; > + required-opps = <&cprh_opp3>; > + }; > + > + opp-1113600000 { > + opp-hz = /bits/ 64 <1113600000>; > + required-opps = <&cprh_opp2>; > + }; > + > + opp-300000000 { > + opp-hz = /bits/ 64 <300000000>; > + required-opps = <&cprh_opp1>; > + }; > + }; > + > + cprh_opp_table: opp-table-cprh { > + compatible = "operating-points-v2-qcom-level"; > + > + cprh_opp1: opp-1 { > + opp-level = <1>; > + qcom,opp-fuse-level = <1>; > + qcom,opp-cloop-vadj = <0>; > + qcom,opp-oloop-vadj = <0>; > + }; > + > + cprh_opp2: opp-2 { > + opp-level = <2>; > + qcom,opp-fuse-level = <2>; > + qcom,opp-cloop-vadj = <0>; > + qcom,opp-oloop-vadj = <0>; > + }; > + > + cprh_opp3: opp-3 { > + opp-level = <3>; > + qcom,opp-fuse-level = <2 3>; > + qcom,opp-cloop-vadj = <0>; > + qcom,opp-oloop-vadj = <0>; > + }; > + }; > + > + apc_cprh: power-controller@179c8000 { > + compatible = "qcom,msm8998-cprh", "qcom,cprh"; > + reg = <0x0179c8000 0x4000>, <0x0179c4000 0x4000>; > + clocks = <&gcc GCC_HMSS_RBCPR_CLK>; > + clock-names = "ref"; > + > + operating-points-v2 = <&cprh_opp_table>; > + #power-domain-cells = <1>; > + > + nvmem-cells = <&cpr_efuse_speedbin>, > + <&cpr_fuse_revision>, > + <&cpr_quot0_pwrcl>, > + <&cpr_quot1_pwrcl>, > + <&cpr_quot2_pwrcl>, > + <&cpr_quot3_pwrcl>, > + <&cpr_quot_offset1_pwrcl>, > + <&cpr_quot_offset2_pwrcl>, > + <&cpr_quot_offset3_pwrcl>, > + <&cpr_init_voltage0_pwrcl>, > + <&cpr_init_voltage1_pwrcl>, > + <&cpr_init_voltage2_pwrcl>, > + <&cpr_init_voltage3_pwrcl>, > + <&cpr_ro_sel0_pwrcl>, > + <&cpr_ro_sel1_pwrcl>, > + <&cpr_ro_sel2_pwrcl>, > + <&cpr_ro_sel3_pwrcl>, > + <&cpr_quot0_perfcl>, > + <&cpr_quot1_perfcl>, > + <&cpr_quot2_perfcl>, > + <&cpr_quot3_perfcl>, > + <&cpr_quot_offset1_perfcl>, > + <&cpr_quot_offset2_perfcl>, > + <&cpr_quot_offset3_perfcl>, > + <&cpr_init_voltage0_perfcl>, > + <&cpr_init_voltage1_perfcl>, > + <&cpr_init_voltage2_perfcl>, > + <&cpr_init_voltage3_perfcl>, > + <&cpr_ro_sel0_perfcl>, > + <&cpr_ro_sel1_perfcl>, > + <&cpr_ro_sel2_perfcl>, > + <&cpr_ro_sel3_perfcl>; > + nvmem-cell-names = "cpr_speed_bin", > + "cpr_fuse_revision", > + "cpr0_quotient1", > + "cpr0_quotient2", > + "cpr0_quotient3", > + "cpr0_quotient4", > + "cpr0_quotient_offset2", > + "cpr0_quotient_offset3", > + "cpr0_quotient_offset4", > + "cpr0_init_voltage1", > + "cpr0_init_voltage2", > + "cpr0_init_voltage3", > + "cpr0_init_voltage4", > + "cpr0_ring_osc1", > + "cpr0_ring_osc2", > + "cpr0_ring_osc3", > + "cpr0_ring_osc4", > + "cpr1_quotient1", > + "cpr1_quotient2", > + "cpr1_quotient3", > + "cpr1_quotient4", > + "cpr1_quotient_offset2", > + "cpr1_quotient_offset3", > + "cpr1_quotient_offset4", > + "cpr1_init_voltage1", > + "cpr1_init_voltage2", > + "cpr1_init_voltage3", > + "cpr1_init_voltage4", > + "cpr1_ring_osc1", > + "cpr1_ring_osc2", > + "cpr1_ring_osc3", > + "cpr1_ring_osc4"; > + }; > +... > > -- > 2.39.1 >
diff --git a/Documentation/devicetree/bindings/soc/qcom/qcom,cpr3.yaml b/Documentation/devicetree/bindings/soc/qcom/qcom,cpr3.yaml new file mode 100644 index 000000000000..18366c1e58b9 --- /dev/null +++ b/Documentation/devicetree/bindings/soc/qcom/qcom,cpr3.yaml @@ -0,0 +1,299 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: "http://devicetree.org/schemas/soc/qcom/qcom,cpr3.yaml#" +$schema: "http://devicetree.org/meta-schemas/core.yaml#" + +title: Qualcomm Core Power Reduction v3/v4/Hardened (CPR3, CPR4, CPRh) + +description: | + CPR (Core Power Reduction) is a technology to reduce core power on a CPU + or other device. Each OPP of a device corresponds to a "corner" that has + a range of valid voltages for a particular frequency. While the device is + running at a particular frequency, CPR monitors dynamic factors such as + temperature, etc. and suggests or, in the CPR-Hardened case performs, + adjustments to the voltage to save power and meet silicon characteristic + requirements. + +maintainers: + - AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> + +properties: + compatible: + oneOf: + - description: CPRv3 controller + items: + - const: qcom,cpr3 + - description: CPRv4 controller + items: + - const: qcom,cpr4 + - description: CPRv4-Hardened controller + items: + - enum: + - qcom,msm8998-cprh + - qcom,sdm630-cprh + - const: qcom,cprh + + reg: + description: Base address and size of the CPR controller(s) + minItems: 1 + maxItems: 2 + + interrupts: + maxItems: 1 + + clock-names: + items: + - const: "ref" + + clocks: + items: + - description: CPR reference clock + + vdd-supply: + description: Autonomous Phase Control (APC) or other power supply + + '#power-domain-cells': + const: 1 + + acc-syscon: + $ref: /schemas/types.yaml#/definitions/phandle + description: phandle to syscon for writing ACC settings + + nvmem-cells: + description: Cells containing the fuse corners and revision data + minItems: 10 + maxItems: 32 + + nvmem-cell-names: + minItems: 10 + maxItems: 32 + + operating-points-v2: true + + power-domains: true + +required: + - compatible + - reg + - clocks + - clock-names + - operating-points-v2 + - "#power-domain-cells" + - nvmem-cells + - nvmem-cell-names + +additionalProperties: false + +allOf: + - if: + properties: + compatible: + contains: + enum: + - qcom,msm8998-cprh + then: + properties: + nvmem-cell-names: + items: + - const: "cpr_speed_bin" + - const: "cpr_fuse_revision" + - const: "cpr0_quotient1" + - const: "cpr0_quotient2" + - const: "cpr0_quotient3" + - const: "cpr0_quotient4" + - const: "cpr0_quotient_offset2" + - const: "cpr0_quotient_offset3" + - const: "cpr0_quotient_offset4" + - const: "cpr0_init_voltage1" + - const: "cpr0_init_voltage2" + - const: "cpr0_init_voltage3" + - const: "cpr0_init_voltage4" + - const: "cpr0_ring_osc1" + - const: "cpr0_ring_osc2" + - const: "cpr0_ring_osc3" + - const: "cpr0_ring_osc4" + - const: "cpr1_quotient1" + - const: "cpr1_quotient2" + - const: "cpr1_quotient3" + - const: "cpr1_quotient4" + - const: "cpr1_quotient_offset2" + - const: "cpr1_quotient_offset3" + - const: "cpr1_quotient_offset4" + - const: "cpr1_init_voltage1" + - const: "cpr1_init_voltage2" + - const: "cpr1_init_voltage3" + - const: "cpr1_init_voltage4" + - const: "cpr1_ring_osc1" + - const: "cpr1_ring_osc2" + - const: "cpr1_ring_osc3" + - const: "cpr1_ring_osc4" + +examples: + - | + #include <dt-bindings/clock/qcom,gcc-msm8998.h> + #include <dt-bindings/interrupt-controller/irq.h> + + cpus { + #address-cells = <2>; + #size-cells = <0>; + + cpu@0 { + compatible = "qcom,kryo280"; + device_type = "cpu"; + reg = <0x0 0x0>; + operating-points-v2 = <&cpu_gold_opp_table>; + power-domains = <&apc_cprh 0>; + power-domain-names = "cprh"; + }; + + cpu@100 { + compatible = "qcom,kryo280"; + device_type = "cpu"; + reg = <0x0 0x100>; + operating-points-v2 = <&cpu_silver_opp_table>; + power-domains = <&apc_cprh 1>; + power-domain-names = "cprh"; + }; + }; + + cpu0_opp_table: opp-table-cpu0 { + compatible = "operating-points-v2"; + opp-shared; + + opp-1843200000 { + opp-hz = /bits/ 64 <1843200000>; + required-opps = <&cprh_opp3>; + }; + + opp-1094400000 { + opp-hz = /bits/ 64 <1094400000>; + required-opps = <&cprh_opp2>; + }; + + opp-300000000 { + opp-hz = /bits/ 64 <300000000>; + required-opps = <&cprh_opp1>; + }; + }; + + cpu4_opp_table: opp-table-cpu4 { + compatible = "operating-points-v2"; + opp-shared; + + opp-2208000000 { + opp-hz = /bits/ 64 <2208000000>; + required-opps = <&cprh_opp3>; + }; + + opp-1113600000 { + opp-hz = /bits/ 64 <1113600000>; + required-opps = <&cprh_opp2>; + }; + + opp-300000000 { + opp-hz = /bits/ 64 <300000000>; + required-opps = <&cprh_opp1>; + }; + }; + + cprh_opp_table: opp-table-cprh { + compatible = "operating-points-v2-qcom-level"; + + cprh_opp1: opp-1 { + opp-level = <1>; + qcom,opp-fuse-level = <1>; + qcom,opp-cloop-vadj = <0>; + qcom,opp-oloop-vadj = <0>; + }; + + cprh_opp2: opp-2 { + opp-level = <2>; + qcom,opp-fuse-level = <2>; + qcom,opp-cloop-vadj = <0>; + qcom,opp-oloop-vadj = <0>; + }; + + cprh_opp3: opp-3 { + opp-level = <3>; + qcom,opp-fuse-level = <2 3>; + qcom,opp-cloop-vadj = <0>; + qcom,opp-oloop-vadj = <0>; + }; + }; + + apc_cprh: power-controller@179c8000 { + compatible = "qcom,msm8998-cprh", "qcom,cprh"; + reg = <0x0179c8000 0x4000>, <0x0179c4000 0x4000>; + clocks = <&gcc GCC_HMSS_RBCPR_CLK>; + clock-names = "ref"; + + operating-points-v2 = <&cprh_opp_table>; + #power-domain-cells = <1>; + + nvmem-cells = <&cpr_efuse_speedbin>, + <&cpr_fuse_revision>, + <&cpr_quot0_pwrcl>, + <&cpr_quot1_pwrcl>, + <&cpr_quot2_pwrcl>, + <&cpr_quot3_pwrcl>, + <&cpr_quot_offset1_pwrcl>, + <&cpr_quot_offset2_pwrcl>, + <&cpr_quot_offset3_pwrcl>, + <&cpr_init_voltage0_pwrcl>, + <&cpr_init_voltage1_pwrcl>, + <&cpr_init_voltage2_pwrcl>, + <&cpr_init_voltage3_pwrcl>, + <&cpr_ro_sel0_pwrcl>, + <&cpr_ro_sel1_pwrcl>, + <&cpr_ro_sel2_pwrcl>, + <&cpr_ro_sel3_pwrcl>, + <&cpr_quot0_perfcl>, + <&cpr_quot1_perfcl>, + <&cpr_quot2_perfcl>, + <&cpr_quot3_perfcl>, + <&cpr_quot_offset1_perfcl>, + <&cpr_quot_offset2_perfcl>, + <&cpr_quot_offset3_perfcl>, + <&cpr_init_voltage0_perfcl>, + <&cpr_init_voltage1_perfcl>, + <&cpr_init_voltage2_perfcl>, + <&cpr_init_voltage3_perfcl>, + <&cpr_ro_sel0_perfcl>, + <&cpr_ro_sel1_perfcl>, + <&cpr_ro_sel2_perfcl>, + <&cpr_ro_sel3_perfcl>; + nvmem-cell-names = "cpr_speed_bin", + "cpr_fuse_revision", + "cpr0_quotient1", + "cpr0_quotient2", + "cpr0_quotient3", + "cpr0_quotient4", + "cpr0_quotient_offset2", + "cpr0_quotient_offset3", + "cpr0_quotient_offset4", + "cpr0_init_voltage1", + "cpr0_init_voltage2", + "cpr0_init_voltage3", + "cpr0_init_voltage4", + "cpr0_ring_osc1", + "cpr0_ring_osc2", + "cpr0_ring_osc3", + "cpr0_ring_osc4", + "cpr1_quotient1", + "cpr1_quotient2", + "cpr1_quotient3", + "cpr1_quotient4", + "cpr1_quotient_offset2", + "cpr1_quotient_offset3", + "cpr1_quotient_offset4", + "cpr1_init_voltage1", + "cpr1_init_voltage2", + "cpr1_init_voltage3", + "cpr1_init_voltage4", + "cpr1_ring_osc1", + "cpr1_ring_osc2", + "cpr1_ring_osc3", + "cpr1_ring_osc4"; + }; +...