| Message ID | 20221129064042.17806-1-amadeus@jmu.edu.cn |
|---|---|
| State | Not Applicable, archived |
| Headers | show |
| Series | [1/2] dt-bindings: Add doc for Orange Pi R1 Plus | expand |
| Context | Check | Description |
|---|---|---|
| robh/checkpatch | success | |
| robh/patch-applied | success | |
| robh/dtbs-check | warning | build log |
| robh/dt-meta-schema | success |
On 29/11/2022 07:40, Chukun Pan wrote: > Add devicetree binding documentation for the Orange Pi R1 Plus. Use subject prefixes matching the subsystem (git log --oneline -- ...). dt-bindings: arm: rockchip: Add Orange Pi R1 Plus > > Signed-off-by: Chukun Pan <amadeus@jmu.edu.cn> > --- > Documentation/devicetree/bindings/arm/rockchip.yaml | 5 +++++ > 1 file changed, 5 insertions(+) Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Best regards, Krzysztof
On 29/11/2022 07:40, Chukun Pan wrote: > Orange Pi R1 Plus is a Rockchip RK3328 based SBC by Xunlong. > > This device is similar to the NanoPi R2S, and has a 16MB > SPI NOR (mx25l12805d). The reset button is changed to > directly reset the power supply, another detail is that > both network ports have independent MAC addresses. > > Signed-off-by: Chukun Pan <amadeus@jmu.edu.cn> > --- > arch/arm64/boot/dts/rockchip/Makefile | 1 + > .../dts/rockchip/rk3328-orangepi-r1-plus.dts | 373 ++++++++++++++++++ > 2 files changed, 374 insertions(+) > create mode 100644 arch/arm64/boot/dts/rockchip/rk3328-orangepi-r1-plus.dts > > diff --git a/arch/arm64/boot/dts/rockchip/Makefile b/arch/arm64/boot/dts/rockchip/Makefile > index 0a76a2ebb5f6..27e00f4f3c86 100644 > --- a/arch/arm64/boot/dts/rockchip/Makefile > +++ b/arch/arm64/boot/dts/rockchip/Makefile > @@ -15,6 +15,7 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3326-odroid-go3.dtb > dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3328-a1.dtb > dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3328-evb.dtb > dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3328-nanopi-r2s.dtb > +dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3328-orangepi-r1-plus.dtb > dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3328-rock64.dtb > dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3328-rock-pi-e.dtb > dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3328-roc-cc.dtb > diff --git a/arch/arm64/boot/dts/rockchip/rk3328-orangepi-r1-plus.dts b/arch/arm64/boot/dts/rockchip/rk3328-orangepi-r1-plus.dts > new file mode 100644 > index 000000000000..daa4da0bd5e4 > --- /dev/null > +++ b/arch/arm64/boot/dts/rockchip/rk3328-orangepi-r1-plus.dts > @@ -0,0 +1,373 @@ > +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) > +/* > + * Based on rk3328-nanopi-r2s.dts, which is: > + * Copyright (c) 2020 David Bauer <mail@david-bauer.net> > + */ > + > +/dts-v1/; > + > +#include <dt-bindings/gpio/gpio.h> > +#include <dt-bindings/leds/common.h> > +#include "rk3328.dtsi" > + > +/ { > + model = "Xunlong Orange Pi R1 Plus"; > + compatible = "xunlong,orangepi-r1-plus", "rockchip,rk3328"; > + > + aliases { > + ethernet1 = &rtl8153; > + mmc0 = &sdmmc; > + }; > + > + chosen { > + stdout-path = "serial2:1500000n8"; > + }; > + > + gmac_clk: gmac-clock { > + compatible = "fixed-clock"; > + clock-frequency = <125000000>; > + clock-output-names = "gmac_clkin"; > + #clock-cells = <0>; > + }; > + > + leds { > + compatible = "gpio-leds"; > + pinctrl-0 = <&lan_led_pin>, <&sys_led_pin>, <&wan_led_pin>; > + pinctrl-names = "default"; > + > + led-0 { > + function = LED_FUNCTION_LAN; > + color = <LED_COLOR_ID_GREEN>; > + gpios = <&gpio2 RK_PB7 GPIO_ACTIVE_HIGH>; > + }; > + > + led-1 { > + function = LED_FUNCTION_STATUS; > + color = <LED_COLOR_ID_RED>; > + gpios = <&gpio3 RK_PC5 GPIO_ACTIVE_HIGH>; > + linux,default-trigger = "heartbeat"; > + }; > + > + led-2 { > + function = LED_FUNCTION_WAN; > + color = <LED_COLOR_ID_GREEN>; > + gpios = <&gpio2 RK_PC2 GPIO_ACTIVE_HIGH>; > + }; > + }; > + > + vcc_sd: sdmmc-regulator { > + compatible = "regulator-fixed"; > + gpio = <&gpio0 RK_PD6 GPIO_ACTIVE_LOW>; > + pinctrl-0 = <&sdmmc0m1_pin>; > + pinctrl-names = "default"; > + regulator-name = "vcc_sd"; > + regulator-boot-on; > + vin-supply = <&vcc_io>; > + }; > + > + vcc_sys: vcc-sys { Use consistent prefix/suffix, so -regulator. > + compatible = "regulator-fixed"; > + regulator-name = "vcc_sys"; > + regulator-always-on; > + regulator-boot-on; > + regulator-min-microvolt = <5000000>; > + regulator-max-microvolt = <5000000>; > + }; > + > + vdd_5v_lan: vdd-5v-lan { Dutto > + compatible = "regulator-fixed"; > + enable-active-high; > + gpio = <&gpio2 RK_PC6 GPIO_ACTIVE_HIGH>; > + pinctrl-0 = <&lan_vdd_pin>; > + pinctrl-names = "default"; > + regulator-name = "vdd_5v_lan"; > + regulator-always-on; > + regulator-boot-on; > + vin-supply = <&vcc_sys>; > + }; > +}; > + Best regards, Krzysztof
diff --git a/Documentation/devicetree/bindings/arm/rockchip.yaml b/Documentation/devicetree/bindings/arm/rockchip.yaml index 88ff4422a8c1..666a24992f88 100644 --- a/Documentation/devicetree/bindings/arm/rockchip.yaml +++ b/Documentation/devicetree/bindings/arm/rockchip.yaml @@ -761,6 +761,11 @@ properties: - const: tronsmart,orion-r68-meta - const: rockchip,rk3368 + - description: Xunlong Orange Pi R1 Plus + items: + - const: xunlong,orangepi-r1-plus + - const: rockchip,rk3328 + - description: Zkmagic A95X Z2 items: - const: zkmagic,a95x-z2
Add devicetree binding documentation for the Orange Pi R1 Plus. Signed-off-by: Chukun Pan <amadeus@jmu.edu.cn> --- Documentation/devicetree/bindings/arm/rockchip.yaml | 5 +++++ 1 file changed, 5 insertions(+)