| Message ID | 20221001030546.28220-2-quic_molvera@quicinc.com |
|---|---|
| State | Changes Requested, archived |
| Headers | show |
| Series | Add pinctrl support for QDU1000/QRU1000 SoCs | expand |
| Context | Check | Description |
|---|---|---|
| robh/checkpatch | success | |
| robh/patch-applied | success | |
| robh/dt-meta-schema | fail | build log |
On 01/10/2022 05:05, Melody Olvera wrote: > Add documentation details for device tree bindings for QDU1000 and QRU1000 > TLMM devices. > > Signed-off-by: Melody Olvera <quic_molvera@quicinc.com> > --- > .../pinctrl/qcom,qdru1000-pinctrl.yaml | 133 ++++++++++++++++++ > 1 file changed, 133 insertions(+) > create mode 100644 Documentation/devicetree/bindings/pinctrl/qcom,qdru1000-pinctrl.yaml > > diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,qdru1000-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,qdru1000-pinctrl.yaml > new file mode 100644 > index 000000000000..e8d938303231 > --- /dev/null > +++ b/Documentation/devicetree/bindings/pinctrl/qcom,qdru1000-pinctrl.yaml > @@ -0,0 +1,133 @@ > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) > +%YAML 1.2 > +--- > +$id: http://devicetree.org/schemas/bindings/pinctrl/qcom,qdru1000-pinctrl.yaml# > +$schema: http://devicetree.org/meta-schemas/core.yaml# > + > +title: Qualcomm Technologies, Inc. QDU1000/QRU1000 TLMM block > + > +maintainers: > + - Melody Olvera <quic_molvera@quicinc.com> > + > +description: | > + This binding describes the Top Level Mode Multiplexer block. > + > +properties: > + compatible: > + items: > + - const: qcom,qdu1000-tlmm > + - const: qcom,qru1000-tlmm > + > + reg: > + items: > + - description: Base address of TLMM register space > + - description: Size of TLMM register space > + > + interrupts: > + minItems: 0 Cannot be 0 of interrupts. > + maxItems: 1 > + items: > + - const: TLMM summary IRQ > + > + interrupt-controller: true > + > + '#interrupt-cells': > + const: 2 > + > + gpio-controller: true > + > + '#gpio-cells': > + const: 2 > + > + wakeup-parent: > + maxItems: 1 > + description: > + Please refer to ../gpio/gpio.txt and ../interrupt-controller/interrupts.txt for > + a general description of GPIO and interrupt bindings. > + > + Please refer to pinctrl-bindings.txt in this directory for details of the > + common pinctrl bindings used by client devices, including the meaning of the > + phrase "pin configuration node". > + > + The pin configuration nodes act as a container for an arbitrary number of > + subnodes. Each of these subnodes represents some desired configuration for a > + pin, a group, or a list of pins or groups. This configuration can include the > + mux function to select on those pin(s)/group(s), and various pin configuration > + parameters, such as pull-up, drive strength, etc. > + > + > +# PIN CONFIGURATION NODES > +patternPropetries: > + '^.*$': > + if: > + type: object > + then: Nope, that's not correct binding. It does not work. It never worked. Please do it exactly like: https://lore.kernel.org/linux-devicetree/20220930200529.331223-1-krzysztof.kozlowski@linaro.org/T/#m08b62ef5d873a52a5cbf3c53b25eff03726e7a16 https://lore.kernel.org/linux-devicetree/20220927173702.5200-1-krzysztof.kozlowski@linaro.org/T/#t > + properties: > + pins: > + description: > + List of gpio pins affected by the properties specified in > + this subnode. > + items: > + oneOf: > + - pattern: "^gpio([0-9]|[1-9][0-9]|1[0-9][0-9]|20[0-9])" > + - enum: [ sdc2_clk, sdc2_cmd, sdc2_data, ufs_reset ] > + minItems: 1 > + maxItems: 36 > + function: > + description: > + Specify the alternative function to be configured for the > + specified pins. Functions are only valid for gpio pins. > + enum: [gpio, aon_cam, atest_char, atest_char0, atest_char1, atest_char2, atest_char3, > + atest_usb0, atest_usb00, atest_usb01, atest_usb02, atest_usb03, audio_ref, cam_mclk, > + cci_async, cci_i2c, cci_timer0, cci_timer1, cci_timer2, cci_timer3, cci_timer4, > + cmu_rng0, cmu_rng1, cmu_rng2, cmu_rng3, coex_uart1, coex_uart2, cri_trng, cri_trng0, > + cri_trng1, dbg_out, ddr_bist, ddr_pxi0, ddr_pxi1, ddr_pxi2, ddr_pxi3, dp_hot, gcc_gp1, > + gcc_gp2, gcc_gp3, ibi_i3c, jitter_bist, mdp_vsync, mdp_vsync0, mdp_vsync1, mdp_vsync2, > + mdp_vsync3, mi2s0_data0, mi2s0_data1, mi2s0_sck, mi2s0_ws, mi2s2_data0, mi2s2_data1, > + mi2s2_sck, mi2s2_ws, mss_grfc0, mss_grfc1, mss_grfc10, mss_grfc11, mss_grfc12, > + mss_grfc2, mss_grfc3, mss_grfc4, mss_grfc5, mss_grfc6, mss_grfc7, mss_grfc8, mss_grfc9, > + nav_0, nav_1, nav_2, pcie0_clkreqn, pcie1_clkreqn, phase_flag0, phase_flag1, > + phase_flag10, phase_flag11, phase_flag12, phase_flag13, phase_flag14, phase_flag15, > + phase_flag16, phase_flag17, phase_flag18, phase_flag19, phase_flag2, phase_flag20, > + phase_flag21, phase_flag22, phase_flag23, phase_flag24, phase_flag25, phase_flag26, > + phase_flag27, phase_flag28, phase_flag29, phase_flag3, phase_flag30, phase_flag31, > + phase_flag4, phase_flag5, phase_flag6, phase_flag7, phase_flag8, phase_flag9, pll_bist, > + pll_clk, pri_mi2s, prng_rosc0, prng_rosc1, prng_rosc2, prng_rosc3, qdss_cti, qdss_gpio, > + qdss_gpio0, qdss_gpio1, qdss_gpio10, qdss_gpio11, qdss_gpio12, qdss_gpio13, qdss_gpio14, > + qdss_gpio15, qdss_gpio2, qdss_gpio3, qdss_gpio4, qdss_gpio5, qdss_gpio6, qdss_gpio7, > + qdss_gpio8, qdss_gpio9, qlink0_enable, qlink0_request, qlink0_wmss, qlink1_enable, > + qlink1_request, qlink1_wmss, qlink2_enable, qlink2_request, qlink2_wmss, qspi0, qspi1, > + qspi2, qspi3, qspi_clk, qspi_cs, qup0, qup1, qup10, qup11, qup12, qup13, qup14, qup15, > + qup16, qup17, qup18, qup19, qup2, qup20, qup21, qup3, qup4, qup5, qup6, qup7, qup8, > + qup9, qup_l4, qup_l5, qup_l6, sd_write, sdc40, sdc41, sdc42, sdc43, sdc4_clk, sdc4_cmd, > + sec_mi2s, tb_trig, tgu_ch0, tgu_ch1, tgu_ch2, tgu_ch3, tmess_prng0, tmess_prng1, > + tmess_prng2, tmess_prng3, tsense_pwm1, tsense_pwm2, uim0_clk, uim0_data, uim0_present, > + uim0_reset, uim1_clk, uim1_data, uim1_present, uim1_reset, usb2phy_ac, usb_phy, vfr_0, > + vfr_1, vsense_trigger] > + drive-strength: > + enum: [2, 4, 6, 8, 10, 12, 14, 16] > + default: 2 > + description: > + Selects the drive strength for the specified pins, in mA. > + bias-pull-down: true > + bias-pull-up: true > + bias-disable: true > + output-high: true > + output-low: true You miss blank lines in several places. Please do it exactly like I shown for sdm845. > + required: > + - pins > + - function > + additionalProperties: false > + > +examples: > + - | > + tlmm: pinctrl@03000000 { > + compatible = "qcom,qdu10000-tlmm"; > + reg = <0x03000000 0xdc2000>; > + interrupts = <0 208 0>; Use defines. > + gpio-controller; > + #gpio-cells = <2>; > + interrupt-controller; > + #interrupt-cells = <2>; > + wakeup-parent = <&pdc>; Missing children. > + }; Best regards, Krzysztof
On Fri, 30 Sep 2022 20:05:45 -0700, Melody Olvera wrote: > Add documentation details for device tree bindings for QDU1000 and QRU1000 > TLMM devices. > > Signed-off-by: Melody Olvera <quic_molvera@quicinc.com> > --- > .../pinctrl/qcom,qdru1000-pinctrl.yaml | 133 ++++++++++++++++++ > 1 file changed, 133 insertions(+) > create mode 100644 Documentation/devicetree/bindings/pinctrl/qcom,qdru1000-pinctrl.yaml > My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check' on your patch (DT_CHECKER_FLAGS is new in v5.13): yamllint warnings/errors: ./Documentation/devicetree/bindings/pinctrl/qcom,qdru1000-pinctrl.yaml:81:13: [warning] wrong indentation: expected 17 but found 12 (indentation) ./Documentation/devicetree/bindings/pinctrl/qcom,qdru1000-pinctrl.yaml:82:13: [warning] wrong indentation: expected 17 but found 12 (indentation) ./Documentation/devicetree/bindings/pinctrl/qcom,qdru1000-pinctrl.yaml:83:13: [warning] wrong indentation: expected 17 but found 12 (indentation) ./Documentation/devicetree/bindings/pinctrl/qcom,qdru1000-pinctrl.yaml:84:13: [warning] wrong indentation: expected 17 but found 12 (indentation) ./Documentation/devicetree/bindings/pinctrl/qcom,qdru1000-pinctrl.yaml:85:13: [warning] wrong indentation: expected 17 but found 12 (indentation) ./Documentation/devicetree/bindings/pinctrl/qcom,qdru1000-pinctrl.yaml:86:13: [warning] wrong indentation: expected 17 but found 12 (indentation) ./Documentation/devicetree/bindings/pinctrl/qcom,qdru1000-pinctrl.yaml:87:13: [warning] wrong indentation: expected 17 but found 12 (indentation) ./Documentation/devicetree/bindings/pinctrl/qcom,qdru1000-pinctrl.yaml:88:13: [warning] wrong indentation: expected 17 but found 12 (indentation) ./Documentation/devicetree/bindings/pinctrl/qcom,qdru1000-pinctrl.yaml:89:13: [warning] wrong indentation: expected 17 but found 12 (indentation) ./Documentation/devicetree/bindings/pinctrl/qcom,qdru1000-pinctrl.yaml:90:13: [warning] wrong indentation: expected 17 but found 12 (indentation) ./Documentation/devicetree/bindings/pinctrl/qcom,qdru1000-pinctrl.yaml:91:13: [warning] wrong indentation: expected 17 but found 12 (indentation) ./Documentation/devicetree/bindings/pinctrl/qcom,qdru1000-pinctrl.yaml:92:13: [warning] wrong indentation: expected 17 but found 12 (indentation) ./Documentation/devicetree/bindings/pinctrl/qcom,qdru1000-pinctrl.yaml:93:13: [warning] wrong indentation: expected 17 but found 12 (indentation) ./Documentation/devicetree/bindings/pinctrl/qcom,qdru1000-pinctrl.yaml:94:13: [warning] wrong indentation: expected 17 but found 12 (indentation) ./Documentation/devicetree/bindings/pinctrl/qcom,qdru1000-pinctrl.yaml:95:13: [warning] wrong indentation: expected 17 but found 12 (indentation) ./Documentation/devicetree/bindings/pinctrl/qcom,qdru1000-pinctrl.yaml:96:13: [warning] wrong indentation: expected 17 but found 12 (indentation) ./Documentation/devicetree/bindings/pinctrl/qcom,qdru1000-pinctrl.yaml:97:13: [warning] wrong indentation: expected 17 but found 12 (indentation) ./Documentation/devicetree/bindings/pinctrl/qcom,qdru1000-pinctrl.yaml:98:13: [warning] wrong indentation: expected 17 but found 12 (indentation) ./Documentation/devicetree/bindings/pinctrl/qcom,qdru1000-pinctrl.yaml:99:13: [warning] wrong indentation: expected 17 but found 12 (indentation) ./Documentation/devicetree/bindings/pinctrl/qcom,qdru1000-pinctrl.yaml:100:13: [warning] wrong indentation: expected 17 but found 12 (indentation) ./Documentation/devicetree/bindings/pinctrl/qcom,qdru1000-pinctrl.yaml:101:13: [warning] wrong indentation: expected 17 but found 12 (indentation) ./Documentation/devicetree/bindings/pinctrl/qcom,qdru1000-pinctrl.yaml:102:13: [warning] wrong indentation: expected 17 but found 12 (indentation) ./Documentation/devicetree/bindings/pinctrl/qcom,qdru1000-pinctrl.yaml:103:13: [warning] wrong indentation: expected 17 but found 12 (indentation) ./Documentation/devicetree/bindings/pinctrl/qcom,qdru1000-pinctrl.yaml:104:13: [warning] wrong indentation: expected 17 but found 12 (indentation) ./Documentation/devicetree/bindings/pinctrl/qcom,qdru1000-pinctrl.yaml:105:13: [warning] wrong indentation: expected 17 but found 12 (indentation) ./Documentation/devicetree/bindings/pinctrl/qcom,qdru1000-pinctrl.yaml:106:13: [warning] wrong indentation: expected 17 but found 12 (indentation) dtschema/dtc warnings/errors: /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/pinctrl/qcom,qdru1000-pinctrl.yaml: properties:interrupts:minItems: 0 is less than the minimum of 1 from schema $id: http://devicetree.org/meta-schemas/keywords.yaml# /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/pinctrl/qcom,qdru1000-pinctrl.yaml: properties:interrupts: {'minItems': 0, 'maxItems': 1, 'items': [{'const': 'TLMM summary IRQ'}]} should not be valid under {'required': ['maxItems']} hint: "maxItems" is not needed with an "items" list from schema $id: http://devicetree.org/meta-schemas/items.yaml# /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/pinctrl/qcom,qdru1000-pinctrl.yaml: properties:interrupts: 'oneOf' conditional failed, one must be fixed: [{'const': 'TLMM summary IRQ'}] is too short False schema does not allow 0 1 was expected hint: "minItems" is only needed if less than the "items" list length from schema $id: http://devicetree.org/meta-schemas/items.yaml# /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/pinctrl/qcom,qdru1000-pinctrl.yaml: 'patternPropetries' is not one of ['$id', '$schema', 'title', 'description', 'examples', 'required', 'allOf', 'anyOf', 'oneOf', 'definitions', '$defs', 'additionalProperties', 'dependencies', 'dependentRequired', 'dependentSchemas', 'patternProperties', 'properties', 'if', 'then', 'else', 'unevaluatedProperties', 'deprecated', 'maintainers', 'select', '$ref'] from schema $id: http://devicetree.org/meta-schemas/base.yaml# /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/pinctrl/qcom,qdru1000-pinctrl.yaml: 'oneOf' conditional failed, one must be fixed: 'unevaluatedProperties' is a required property 'additionalProperties' is a required property hint: Either unevaluatedProperties or additionalProperties must be present from schema $id: http://devicetree.org/meta-schemas/core.yaml# ./Documentation/devicetree/bindings/pinctrl/qcom,qdru1000-pinctrl.yaml: error checking schema file /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/pinctrl/qcom,qdru1000-pinctrl.yaml: ignoring, error in schema: properties: interrupts: minItems Documentation/devicetree/bindings/pinctrl/qcom,qdru1000-pinctrl.example.dts:21.32-30.11: Warning (unit_address_format): /example-0/pinctrl@03000000: unit name should not have leading 0s Documentation/devicetree/bindings/pinctrl/qcom,qdru1000-pinctrl.example.dtb:0:0: /example-0/pinctrl@03000000: failed to match any schema with compatible: ['qcom,qdu10000-tlmm'] doc reference errors (make refcheckdocs): See https://patchwork.ozlabs.org/patch/ This check can fail if there are any dependencies. The base for a patch series is generally the most recent rc1. If you already ran 'make dt_binding_check' and didn't see the above error(s), then make sure 'yamllint' is installed and dt-schema is up to date: pip3 install dtschema --upgrade Please check and re-submit.
On 10/1/2022 4:20 AM, Krzysztof Kozlowski wrote: > On 01/10/2022 05:05, Melody Olvera wrote: >> Add documentation details for device tree bindings for QDU1000 and QRU1000 >> TLMM devices. >> >> Signed-off-by: Melody Olvera <quic_molvera@quicinc.com> >> --- >> .../pinctrl/qcom,qdru1000-pinctrl.yaml | 133 ++++++++++++++++++ >> 1 file changed, 133 insertions(+) >> create mode 100644 Documentation/devicetree/bindings/pinctrl/qcom,qdru1000-pinctrl.yaml >> >> diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,qdru1000-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,qdru1000-pinctrl.yaml >> new file mode 100644 >> index 000000000000..e8d938303231 >> --- /dev/null >> +++ b/Documentation/devicetree/bindings/pinctrl/qcom,qdru1000-pinctrl.yaml >> @@ -0,0 +1,133 @@ >> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) >> +%YAML 1.2 >> +--- >> +$id: http://devicetree.org/schemas/bindings/pinctrl/qcom,qdru1000-pinctrl.yaml# >> +$schema: http://devicetree.org/meta-schemas/core.yaml# >> + >> +title: Qualcomm Technologies, Inc. QDU1000/QRU1000 TLMM block >> + >> +maintainers: >> + - Melody Olvera <quic_molvera@quicinc.com> >> + >> +description: | >> + This binding describes the Top Level Mode Multiplexer block. >> + >> +properties: >> + compatible: >> + items: >> + - const: qcom,qdu1000-tlmm >> + - const: qcom,qru1000-tlmm >> + >> + reg: >> + items: >> + - description: Base address of TLMM register space >> + - description: Size of TLMM register space >> + >> + interrupts: >> + minItems: 0 > Cannot be 0 of interrupts. > >> + maxItems: 1 >> + items: >> + - const: TLMM summary IRQ >> + >> + interrupt-controller: true >> + >> + '#interrupt-cells': >> + const: 2 >> + >> + gpio-controller: true >> + >> + '#gpio-cells': >> + const: 2 >> + >> + wakeup-parent: >> + maxItems: 1 >> + description: >> + Please refer to ../gpio/gpio.txt and ../interrupt-controller/interrupts.txt for >> + a general description of GPIO and interrupt bindings. >> + >> + Please refer to pinctrl-bindings.txt in this directory for details of the >> + common pinctrl bindings used by client devices, including the meaning of the >> + phrase "pin configuration node". >> + >> + The pin configuration nodes act as a container for an arbitrary number of >> + subnodes. Each of these subnodes represents some desired configuration for a >> + pin, a group, or a list of pins or groups. This configuration can include the >> + mux function to select on those pin(s)/group(s), and various pin configuration >> + parameters, such as pull-up, drive strength, etc. >> + >> + >> +# PIN CONFIGURATION NODES >> +patternPropetries: >> + '^.*$': >> + if: >> + type: object >> + then: > Nope, that's not correct binding. It does not work. It never worked. > > Please do it exactly like: > https://lore.kernel.org/linux-devicetree/20220930200529.331223-1-krzysztof.kozlowski@linaro.org/T/#m08b62ef5d873a52a5cbf3c53b25eff03726e7a16 > https://lore.kernel.org/linux-devicetree/20220927173702.5200-1-krzysztof.kozlowski@linaro.org/T/#t Understood; will correct the binding. > >> + properties: >> + pins: >> + description: >> + List of gpio pins affected by the properties specified in >> + this subnode. >> + items: >> + oneOf: >> + - pattern: "^gpio([0-9]|[1-9][0-9]|1[0-9][0-9]|20[0-9])" >> + - enum: [ sdc2_clk, sdc2_cmd, sdc2_data, ufs_reset ] >> + minItems: 1 >> + maxItems: 36 >> + function: >> + description: >> + Specify the alternative function to be configured for the >> + specified pins. Functions are only valid for gpio pins. >> + enum: [gpio, aon_cam, atest_char, atest_char0, atest_char1, atest_char2, atest_char3, >> + atest_usb0, atest_usb00, atest_usb01, atest_usb02, atest_usb03, audio_ref, cam_mclk, >> + cci_async, cci_i2c, cci_timer0, cci_timer1, cci_timer2, cci_timer3, cci_timer4, >> + cmu_rng0, cmu_rng1, cmu_rng2, cmu_rng3, coex_uart1, coex_uart2, cri_trng, cri_trng0, >> + cri_trng1, dbg_out, ddr_bist, ddr_pxi0, ddr_pxi1, ddr_pxi2, ddr_pxi3, dp_hot, gcc_gp1, >> + gcc_gp2, gcc_gp3, ibi_i3c, jitter_bist, mdp_vsync, mdp_vsync0, mdp_vsync1, mdp_vsync2, >> + mdp_vsync3, mi2s0_data0, mi2s0_data1, mi2s0_sck, mi2s0_ws, mi2s2_data0, mi2s2_data1, >> + mi2s2_sck, mi2s2_ws, mss_grfc0, mss_grfc1, mss_grfc10, mss_grfc11, mss_grfc12, >> + mss_grfc2, mss_grfc3, mss_grfc4, mss_grfc5, mss_grfc6, mss_grfc7, mss_grfc8, mss_grfc9, >> + nav_0, nav_1, nav_2, pcie0_clkreqn, pcie1_clkreqn, phase_flag0, phase_flag1, >> + phase_flag10, phase_flag11, phase_flag12, phase_flag13, phase_flag14, phase_flag15, >> + phase_flag16, phase_flag17, phase_flag18, phase_flag19, phase_flag2, phase_flag20, >> + phase_flag21, phase_flag22, phase_flag23, phase_flag24, phase_flag25, phase_flag26, >> + phase_flag27, phase_flag28, phase_flag29, phase_flag3, phase_flag30, phase_flag31, >> + phase_flag4, phase_flag5, phase_flag6, phase_flag7, phase_flag8, phase_flag9, pll_bist, >> + pll_clk, pri_mi2s, prng_rosc0, prng_rosc1, prng_rosc2, prng_rosc3, qdss_cti, qdss_gpio, >> + qdss_gpio0, qdss_gpio1, qdss_gpio10, qdss_gpio11, qdss_gpio12, qdss_gpio13, qdss_gpio14, >> + qdss_gpio15, qdss_gpio2, qdss_gpio3, qdss_gpio4, qdss_gpio5, qdss_gpio6, qdss_gpio7, >> + qdss_gpio8, qdss_gpio9, qlink0_enable, qlink0_request, qlink0_wmss, qlink1_enable, >> + qlink1_request, qlink1_wmss, qlink2_enable, qlink2_request, qlink2_wmss, qspi0, qspi1, >> + qspi2, qspi3, qspi_clk, qspi_cs, qup0, qup1, qup10, qup11, qup12, qup13, qup14, qup15, >> + qup16, qup17, qup18, qup19, qup2, qup20, qup21, qup3, qup4, qup5, qup6, qup7, qup8, >> + qup9, qup_l4, qup_l5, qup_l6, sd_write, sdc40, sdc41, sdc42, sdc43, sdc4_clk, sdc4_cmd, >> + sec_mi2s, tb_trig, tgu_ch0, tgu_ch1, tgu_ch2, tgu_ch3, tmess_prng0, tmess_prng1, >> + tmess_prng2, tmess_prng3, tsense_pwm1, tsense_pwm2, uim0_clk, uim0_data, uim0_present, >> + uim0_reset, uim1_clk, uim1_data, uim1_present, uim1_reset, usb2phy_ac, usb_phy, vfr_0, >> + vfr_1, vsense_trigger] >> + drive-strength: >> + enum: [2, 4, 6, 8, 10, 12, 14, 16] >> + default: 2 >> + description: >> + Selects the drive strength for the specified pins, in mA. >> + bias-pull-down: true >> + bias-pull-up: true >> + bias-disable: true >> + output-high: true >> + output-low: true > You miss blank lines in several places. Please do it exactly like I > shown for sdm845. Ditto for above. > >> + required: >> + - pins >> + - function >> + additionalProperties: false >> + >> +examples: >> + - | >> + tlmm: pinctrl@03000000 { >> + compatible = "qcom,qdu10000-tlmm"; >> + reg = <0x03000000 0xdc2000>; >> + interrupts = <0 208 0>; > Use defines. Understood. > >> + gpio-controller; >> + #gpio-cells = <2>; >> + interrupt-controller; >> + #interrupt-cells = <2>; >> + wakeup-parent = <&pdc>; > Missing children. Will add. > >> + }; > Best regards, > Krzysztof Thanks, Melody
diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,qdru1000-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,qdru1000-pinctrl.yaml new file mode 100644 index 000000000000..e8d938303231 --- /dev/null +++ b/Documentation/devicetree/bindings/pinctrl/qcom,qdru1000-pinctrl.yaml @@ -0,0 +1,133 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/bindings/pinctrl/qcom,qdru1000-pinctrl.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm Technologies, Inc. QDU1000/QRU1000 TLMM block + +maintainers: + - Melody Olvera <quic_molvera@quicinc.com> + +description: | + This binding describes the Top Level Mode Multiplexer block. + +properties: + compatible: + items: + - const: qcom,qdu1000-tlmm + - const: qcom,qru1000-tlmm + + reg: + items: + - description: Base address of TLMM register space + - description: Size of TLMM register space + + interrupts: + minItems: 0 + maxItems: 1 + items: + - const: TLMM summary IRQ + + interrupt-controller: true + + '#interrupt-cells': + const: 2 + + gpio-controller: true + + '#gpio-cells': + const: 2 + + wakeup-parent: + maxItems: 1 + description: + Please refer to ../gpio/gpio.txt and ../interrupt-controller/interrupts.txt for + a general description of GPIO and interrupt bindings. + + Please refer to pinctrl-bindings.txt in this directory for details of the + common pinctrl bindings used by client devices, including the meaning of the + phrase "pin configuration node". + + The pin configuration nodes act as a container for an arbitrary number of + subnodes. Each of these subnodes represents some desired configuration for a + pin, a group, or a list of pins or groups. This configuration can include the + mux function to select on those pin(s)/group(s), and various pin configuration + parameters, such as pull-up, drive strength, etc. + + +# PIN CONFIGURATION NODES +patternPropetries: + '^.*$': + if: + type: object + then: + properties: + pins: + description: + List of gpio pins affected by the properties specified in + this subnode. + items: + oneOf: + - pattern: "^gpio([0-9]|[1-9][0-9]|1[0-9][0-9]|20[0-9])" + - enum: [ sdc2_clk, sdc2_cmd, sdc2_data, ufs_reset ] + minItems: 1 + maxItems: 36 + function: + description: + Specify the alternative function to be configured for the + specified pins. Functions are only valid for gpio pins. + enum: [gpio, aon_cam, atest_char, atest_char0, atest_char1, atest_char2, atest_char3, + atest_usb0, atest_usb00, atest_usb01, atest_usb02, atest_usb03, audio_ref, cam_mclk, + cci_async, cci_i2c, cci_timer0, cci_timer1, cci_timer2, cci_timer3, cci_timer4, + cmu_rng0, cmu_rng1, cmu_rng2, cmu_rng3, coex_uart1, coex_uart2, cri_trng, cri_trng0, + cri_trng1, dbg_out, ddr_bist, ddr_pxi0, ddr_pxi1, ddr_pxi2, ddr_pxi3, dp_hot, gcc_gp1, + gcc_gp2, gcc_gp3, ibi_i3c, jitter_bist, mdp_vsync, mdp_vsync0, mdp_vsync1, mdp_vsync2, + mdp_vsync3, mi2s0_data0, mi2s0_data1, mi2s0_sck, mi2s0_ws, mi2s2_data0, mi2s2_data1, + mi2s2_sck, mi2s2_ws, mss_grfc0, mss_grfc1, mss_grfc10, mss_grfc11, mss_grfc12, + mss_grfc2, mss_grfc3, mss_grfc4, mss_grfc5, mss_grfc6, mss_grfc7, mss_grfc8, mss_grfc9, + nav_0, nav_1, nav_2, pcie0_clkreqn, pcie1_clkreqn, phase_flag0, phase_flag1, + phase_flag10, phase_flag11, phase_flag12, phase_flag13, phase_flag14, phase_flag15, + phase_flag16, phase_flag17, phase_flag18, phase_flag19, phase_flag2, phase_flag20, + phase_flag21, phase_flag22, phase_flag23, phase_flag24, phase_flag25, phase_flag26, + phase_flag27, phase_flag28, phase_flag29, phase_flag3, phase_flag30, phase_flag31, + phase_flag4, phase_flag5, phase_flag6, phase_flag7, phase_flag8, phase_flag9, pll_bist, + pll_clk, pri_mi2s, prng_rosc0, prng_rosc1, prng_rosc2, prng_rosc3, qdss_cti, qdss_gpio, + qdss_gpio0, qdss_gpio1, qdss_gpio10, qdss_gpio11, qdss_gpio12, qdss_gpio13, qdss_gpio14, + qdss_gpio15, qdss_gpio2, qdss_gpio3, qdss_gpio4, qdss_gpio5, qdss_gpio6, qdss_gpio7, + qdss_gpio8, qdss_gpio9, qlink0_enable, qlink0_request, qlink0_wmss, qlink1_enable, + qlink1_request, qlink1_wmss, qlink2_enable, qlink2_request, qlink2_wmss, qspi0, qspi1, + qspi2, qspi3, qspi_clk, qspi_cs, qup0, qup1, qup10, qup11, qup12, qup13, qup14, qup15, + qup16, qup17, qup18, qup19, qup2, qup20, qup21, qup3, qup4, qup5, qup6, qup7, qup8, + qup9, qup_l4, qup_l5, qup_l6, sd_write, sdc40, sdc41, sdc42, sdc43, sdc4_clk, sdc4_cmd, + sec_mi2s, tb_trig, tgu_ch0, tgu_ch1, tgu_ch2, tgu_ch3, tmess_prng0, tmess_prng1, + tmess_prng2, tmess_prng3, tsense_pwm1, tsense_pwm2, uim0_clk, uim0_data, uim0_present, + uim0_reset, uim1_clk, uim1_data, uim1_present, uim1_reset, usb2phy_ac, usb_phy, vfr_0, + vfr_1, vsense_trigger] + drive-strength: + enum: [2, 4, 6, 8, 10, 12, 14, 16] + default: 2 + description: + Selects the drive strength for the specified pins, in mA. + bias-pull-down: true + bias-pull-up: true + bias-disable: true + output-high: true + output-low: true + required: + - pins + - function + additionalProperties: false + +examples: + - | + tlmm: pinctrl@03000000 { + compatible = "qcom,qdu10000-tlmm"; + reg = <0x03000000 0xdc2000>; + interrupts = <0 208 0>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + wakeup-parent = <&pdc>; + };
Add documentation details for device tree bindings for QDU1000 and QRU1000 TLMM devices. Signed-off-by: Melody Olvera <quic_molvera@quicinc.com> --- .../pinctrl/qcom,qdru1000-pinctrl.yaml | 133 ++++++++++++++++++ 1 file changed, 133 insertions(+) create mode 100644 Documentation/devicetree/bindings/pinctrl/qcom,qdru1000-pinctrl.yaml