diff mbox series

[v2,1/5] dt-bindings: arm: ti: Rearrange IOPAD macros alphabetically

Message ID 20220901141328.899100-2-vigneshr@ti.com
State Not Applicable, archived
Headers show
Series arm64: dts: ti: Add support for AM62A family of SoCs | expand

Checks

Context Check Description
robh/checkpatch warning total: 4 errors, 0 warnings, 25 lines checked
robh/patch-applied success

Commit Message

Raghavendra, Vignesh Sept. 1, 2022, 2:13 p.m. UTC 
Rearrange SOC specific IOPAD macros alphabetically, so that its easier
to read. No functional change intended.

Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
---
 include/dt-bindings/pinctrl/k3.h | 12 ++++++------
 1 file changed, 6 insertions(+), 6 deletions(-)

Comments

Rob Herring (Arm) Sept. 7, 2022, 8:40 p.m. UTC | #1 
On Thu, 01 Sep 2022 19:43:24 +0530, Vignesh Raghavendra wrote:
> Rearrange SOC specific IOPAD macros alphabetically, so that its easier
> to read. No functional change intended.
> 
> Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
> ---
>  include/dt-bindings/pinctrl/k3.h | 12 ++++++------
>  1 file changed, 6 insertions(+), 6 deletions(-)
> 

Acked-by: Rob Herring <robh@kernel.org>
diff mbox series

Patch

diff --git a/include/dt-bindings/pinctrl/k3.h b/include/dt-bindings/pinctrl/k3.h
index a5204ab91d3e..6c3d02f63bfb 100644
--- a/include/dt-bindings/pinctrl/k3.h
+++ b/include/dt-bindings/pinctrl/k3.h
@@ -29,19 +29,19 @@ 
 #define PIN_INPUT_PULLUP	(INPUT_EN | PULL_UP)
 #define PIN_INPUT_PULLDOWN	(INPUT_EN | PULL_DOWN)
 
+#define AM62X_IOPAD(pa, val, muxmode)		(((pa) & 0x1fff)) ((val) | (muxmode))
+#define AM62X_MCU_IOPAD(pa, val, muxmode)	(((pa) & 0x1fff)) ((val) | (muxmode))
+
+#define AM64X_IOPAD(pa, val, muxmode)		(((pa) & 0x1fff)) ((val) | (muxmode))
+#define AM64X_MCU_IOPAD(pa, val, muxmode)	(((pa) & 0x1fff)) ((val) | (muxmode))
+
 #define AM65X_IOPAD(pa, val, muxmode)		(((pa) & 0x1fff)) ((val) | (muxmode))
 #define AM65X_WKUP_IOPAD(pa, val, muxmode)	(((pa) & 0x1fff)) ((val) | (muxmode))
 
 #define J721E_IOPAD(pa, val, muxmode)		(((pa) & 0x1fff)) ((val) | (muxmode))
 #define J721E_WKUP_IOPAD(pa, val, muxmode)	(((pa) & 0x1fff)) ((val) | (muxmode))
 
-#define AM64X_IOPAD(pa, val, muxmode)		(((pa) & 0x1fff)) ((val) | (muxmode))
-#define AM64X_MCU_IOPAD(pa, val, muxmode)	(((pa) & 0x1fff)) ((val) | (muxmode))
-
 #define J721S2_IOPAD(pa, val, muxmode)		(((pa) & 0x1fff)) ((val) | (muxmode))
 #define J721S2_WKUP_IOPAD(pa, val, muxmode)	(((pa) & 0x1fff)) ((val) | (muxmode))
 
-#define AM62X_IOPAD(pa, val, muxmode)		(((pa) & 0x1fff)) ((val) | (muxmode))
-#define AM62X_MCU_IOPAD(pa, val, muxmode)	(((pa) & 0x1fff)) ((val) | (muxmode))
-
 #endif