| Message ID | 20220826192424.3216734-3-l.stach@pengutronix.de |
|---|---|
| State | Changes Requested, archived |
| Headers | show |
| Series | [1/4] dt-bindings: display: imx: add binding for i.MX8MP HDMI TX | expand |
| Context | Check | Description |
|---|---|---|
| robh/checkpatch | success | |
| robh/patch-applied | success | |
| robh/dtbs-check | warning | build log |
| robh/dt-meta-schema | success |
Hi Lucas, Thank you for the patch. On Fri, Aug 26, 2022 at 09:24:23PM +0200, Lucas Stach wrote: > Add binding for the i.MX8MP HDMI parallel video interface block. > > Signed-off-by: Lucas Stach <l.stach@pengutronix.de> > Tested-by: Marek Vasut <marex@denx.de> > --- > .../display/imx/fsl,imx8mp-hdmi-pvi.yaml | 83 +++++++++++++++++++ > 1 file changed, 83 insertions(+) > create mode 100644 Documentation/devicetree/bindings/display/imx/fsl,imx8mp-hdmi-pvi.yaml > > diff --git a/Documentation/devicetree/bindings/display/imx/fsl,imx8mp-hdmi-pvi.yaml b/Documentation/devicetree/bindings/display/imx/fsl,imx8mp-hdmi-pvi.yaml > new file mode 100644 > index 000000000000..bf25d29c03ab > --- /dev/null > +++ b/Documentation/devicetree/bindings/display/imx/fsl,imx8mp-hdmi-pvi.yaml > @@ -0,0 +1,83 @@ > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) > +%YAML 1.2 > +--- > +$id: http://devicetree.org/schemas/display/imx/fsl,imx8mp-hdmi-pvi.yaml# > +$schema: http://devicetree.org/meta-schemas/core.yaml# > + > +title: Freescale i.MX8MP HDMI Parallel Video Interface > + > +maintainers: > + - Lucas Stach <l.stach@pengutronix.de> > + > +description: | > + The HDMI parallel video interface is timing and sync generator block in the > + i.MX8MP SoC, that sits between the video source and the HDMI TX controller. > + > +properties: > + compatible: > + enum: > + - fsl,imx8mp-hdmi-pvi > + > + reg: > + maxItems: 1 > + > + power-domains: > + maxItems: 1 > + > + ports: > + $ref: /schemas/graph.yaml#/properties/ports > + description: | > + This device has two video ports. You could possibly drop the description here, this is made evident by the two ports below, up to you. > + > + properties: > + port@0: > + $ref: /schemas/graph.yaml#/properties/port > + description: Input from the LCDIF controller. > + > + port@1: > + $ref: /schemas/graph.yaml#/properties/port > + description: Output to the HDMI TX controller > + > + anyOf: > + - required: > + - port@0 > + - required: > + - port@1 Both exist and need to be connected, is there a reason not to require both ? > + > +required: > + - compatible > + - reg > + - power-domains > + - ports > + > +additionalProperties: false > + > +examples: > + - | > + #include <dt-bindings/clock/imx8mp-clock.h> > + #include <dt-bindings/power/imx8mp-power.h> > + > + display-bridge@32fc4000 { > + compatible = "fsl,imx8mp-hdmi-pvi"; > + reg = <0x32fc4000 0x40>; > + power-domains = <&hdmi_blk_ctrl IMX8MP_HDMIBLK_PD_PVI>; > + > + ports { > + #address-cells = <1>; > + #size-cells = <0>; > + > + port@0 { > + reg = <0>; > + pvi_from_lcdif3: endpoint { > + remote-endpoint = <&lcdif3_to_pvi>; > + }; > + }; > + > + port@1 { > + reg = <1>; > + pvi_to_hdmi_tx: endpoint { > + remote-endpoint = <&hdmi_tx_from_pvi>; > + }; > + }; > + }; > + };
On 26/08/2022 22:24, Lucas Stach wrote: > Add binding for the i.MX8MP HDMI parallel video interface block. > > Signed-off-by: Lucas Stach <l.stach@pengutronix.de> > Tested-by: Marek Vasut <marex@denx.de> Same question - how was it tested? This is v1, right? Rest looks good, except Laurent's comments. Best regards, Krzysztof
On Fri, 26 Aug 2022 21:24:23 +0200 Lucas Stach <l.stach@pengutronix.de> wrote: > Add binding for the i.MX8MP HDMI parallel video interface block. > > Signed-off-by: Lucas Stach <l.stach@pengutronix.de> > Tested-by: Marek Vasut <marex@denx.de> > --- > .../display/imx/fsl,imx8mp-hdmi-pvi.yaml | 83 +++++++++++++++++++ > 1 file changed, 83 insertions(+) > create mode 100644 Documentation/devicetree/bindings/display/imx/fsl,imx8mp-hdmi-pvi.yaml > > diff --git a/Documentation/devicetree/bindings/display/imx/fsl,imx8mp-hdmi-pvi.yaml b/Documentation/devicetree/bindings/display/imx/fsl,imx8mp-hdmi-pvi.yaml > new file mode 100644 > index 000000000000..bf25d29c03ab > --- /dev/null > +++ b/Documentation/devicetree/bindings/display/imx/fsl,imx8mp-hdmi-pvi.yaml > @@ -0,0 +1,83 @@ > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) > +%YAML 1.2 > +--- > +$id: http://devicetree.org/schemas/display/imx/fsl,imx8mp-hdmi-pvi.yaml# > +$schema: http://devicetree.org/meta-schemas/core.yaml# > + > +title: Freescale i.MX8MP HDMI Parallel Video Interface > + > +maintainers: > + - Lucas Stach <l.stach@pengutronix.de> > + > +description: | > + The HDMI parallel video interface is timing and sync generator block in the s/is timing/is a timing/ With that fixed: Luca Ceresoli <luca.ceresoli@bootlin.com>
diff --git a/Documentation/devicetree/bindings/display/imx/fsl,imx8mp-hdmi-pvi.yaml b/Documentation/devicetree/bindings/display/imx/fsl,imx8mp-hdmi-pvi.yaml new file mode 100644 index 000000000000..bf25d29c03ab --- /dev/null +++ b/Documentation/devicetree/bindings/display/imx/fsl,imx8mp-hdmi-pvi.yaml @@ -0,0 +1,83 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/imx/fsl,imx8mp-hdmi-pvi.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Freescale i.MX8MP HDMI Parallel Video Interface + +maintainers: + - Lucas Stach <l.stach@pengutronix.de> + +description: | + The HDMI parallel video interface is timing and sync generator block in the + i.MX8MP SoC, that sits between the video source and the HDMI TX controller. + +properties: + compatible: + enum: + - fsl,imx8mp-hdmi-pvi + + reg: + maxItems: 1 + + power-domains: + maxItems: 1 + + ports: + $ref: /schemas/graph.yaml#/properties/ports + description: | + This device has two video ports. + + properties: + port@0: + $ref: /schemas/graph.yaml#/properties/port + description: Input from the LCDIF controller. + + port@1: + $ref: /schemas/graph.yaml#/properties/port + description: Output to the HDMI TX controller + + anyOf: + - required: + - port@0 + - required: + - port@1 + +required: + - compatible + - reg + - power-domains + - ports + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/imx8mp-clock.h> + #include <dt-bindings/power/imx8mp-power.h> + + display-bridge@32fc4000 { + compatible = "fsl,imx8mp-hdmi-pvi"; + reg = <0x32fc4000 0x40>; + power-domains = <&hdmi_blk_ctrl IMX8MP_HDMIBLK_PD_PVI>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + pvi_from_lcdif3: endpoint { + remote-endpoint = <&lcdif3_to_pvi>; + }; + }; + + port@1 { + reg = <1>; + pvi_to_hdmi_tx: endpoint { + remote-endpoint = <&hdmi_tx_from_pvi>; + }; + }; + }; + };