| Message ID | 20220721011746.19663-1-slark_xiao@163.com |
|---|---|
| State | Accepted, archived |
| Headers | show |
| Series | [v2] dt-bindings: Fix typo in comment | expand |
| Context | Check | Description |
|---|---|---|
| robh/checkpatch | success | |
| robh/patch-applied | success | |
| robh/dtbs-check | warning | build log |
| robh/dt-meta-schema | success |
On 21/07/2022 03:17, Slark Xiao wrote: > Fix typo in the comment > > Signed-off-by: Slark Xiao <slark_xiao@163.com> > --- > v2: Add all changes in one subsystem into 1 patch Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Best regards, Krzysztof
On Thu, 21 Jul 2022 09:17:46 +0800, Slark Xiao wrote: > Fix typo in the comment > > Signed-off-by: Slark Xiao <slark_xiao@163.com> > --- > v2: Add all changes in one subsystem into 1 patch > --- > Documentation/devicetree/bindings/arm/msm/qcom,saw2.txt | 2 +- > Documentation/devicetree/bindings/clock/ti/davinci/pll.txt | 2 +- > Documentation/devicetree/bindings/fpga/fpga-region.txt | 2 +- > Documentation/devicetree/bindings/gpio/gpio-pisosr.txt | 2 +- > Documentation/devicetree/bindings/net/qcom-emac.txt | 2 +- > .../bindings/phy/amlogic,meson-axg-mipi-pcie-analog.yaml | 2 +- > .../devicetree/bindings/pinctrl/aspeed,ast2400-pinctrl.yaml | 2 +- > .../devicetree/bindings/pinctrl/aspeed,ast2500-pinctrl.yaml | 2 +- > .../devicetree/bindings/pinctrl/aspeed,ast2600-pinctrl.yaml | 2 +- > .../devicetree/bindings/power/amlogic,meson-ee-pwrc.yaml | 2 +- > Documentation/devicetree/bindings/powerpc/fsl/cpus.txt | 2 +- > Documentation/devicetree/bindings/powerpc/opal/power-mgt.txt | 2 +- > Documentation/devicetree/bindings/remoteproc/qcom,q6v5.txt | 2 +- > Documentation/devicetree/bindings/sound/tlv320adcx140.yaml | 4 ++-- > .../devicetree/bindings/thermal/brcm,avs-ro-thermal.yaml | 2 +- > .../devicetree/bindings/thermal/nvidia,tegra124-soctherm.txt | 2 +- > Documentation/devicetree/bindings/thermal/rcar-thermal.yaml | 2 +- > 17 files changed, 18 insertions(+), 18 deletions(-) > Applied, thanks!
diff --git a/Documentation/devicetree/bindings/arm/msm/qcom,saw2.txt b/Documentation/devicetree/bindings/arm/msm/qcom,saw2.txt index 94d50a949be1..c0e3c3a42bea 100644 --- a/Documentation/devicetree/bindings/arm/msm/qcom,saw2.txt +++ b/Documentation/devicetree/bindings/arm/msm/qcom,saw2.txt @@ -10,7 +10,7 @@ system, notifying them when a low power state is entered or exited. Multiple revisions of the SAW hardware are supported using these Device Nodes. SAW2 revisions differ in the register offset and configuration data. Also, the same revision of the SAW in different SoCs may have different configuration -data due the the differences in hardware capabilities. Hence the SoC name, the +data due the differences in hardware capabilities. Hence the SoC name, the version of the SAW hardware in that SoC and the distinction between cpu (big or Little) or cache, may be needed to uniquely identify the SAW register configuration and initialization data. The compatible string is used to diff --git a/Documentation/devicetree/bindings/clock/ti/davinci/pll.txt b/Documentation/devicetree/bindings/clock/ti/davinci/pll.txt index 36998e184821..c9894538315b 100644 --- a/Documentation/devicetree/bindings/clock/ti/davinci/pll.txt +++ b/Documentation/devicetree/bindings/clock/ti/davinci/pll.txt @@ -15,7 +15,7 @@ Required properties: - for "ti,da850-pll1", shall be "clksrc" Optional properties: -- ti,clkmode-square-wave: Indicates that the the board is supplying a square +- ti,clkmode-square-wave: Indicates that the board is supplying a square wave input on the OSCIN pin instead of using a crystal oscillator. This property is only valid when compatible = "ti,da850-pll0". diff --git a/Documentation/devicetree/bindings/fpga/fpga-region.txt b/Documentation/devicetree/bindings/fpga/fpga-region.txt index 7d3515264838..6694ef29a267 100644 --- a/Documentation/devicetree/bindings/fpga/fpga-region.txt +++ b/Documentation/devicetree/bindings/fpga/fpga-region.txt @@ -330,7 +330,7 @@ succeeded. The Device Tree Overlay will contain: * "target-path" or "target" - The insertion point where the the contents of the overlay will go into the + The insertion point where the contents of the overlay will go into the live tree. target-path is a full path, while target is a phandle. * "ranges" The address space mapping from processor to FPGA bus(ses). diff --git a/Documentation/devicetree/bindings/gpio/gpio-pisosr.txt b/Documentation/devicetree/bindings/gpio/gpio-pisosr.txt index 414a01cdf715..fba3c61f6a5b 100644 --- a/Documentation/devicetree/bindings/gpio/gpio-pisosr.txt +++ b/Documentation/devicetree/bindings/gpio/gpio-pisosr.txt @@ -14,7 +14,7 @@ Optional properties: - ngpios : Number of used GPIO lines (0..n-1), default is 8. - load-gpios : GPIO pin specifier attached to load enable, this pin is pulsed before reading from the device to - load input pin values into the the device. + load input pin values into the device. For other required and optional properties of SPI slave nodes please refer to ../spi/spi-bus.txt. diff --git a/Documentation/devicetree/bindings/net/qcom-emac.txt b/Documentation/devicetree/bindings/net/qcom-emac.txt index 346e6c7f47b7..e6cb2291471c 100644 --- a/Documentation/devicetree/bindings/net/qcom-emac.txt +++ b/Documentation/devicetree/bindings/net/qcom-emac.txt @@ -14,7 +14,7 @@ MAC node: - mac-address : The 6-byte MAC address. If present, it is the default MAC address. - internal-phy : phandle to the internal PHY node -- phy-handle : phandle the the external PHY node +- phy-handle : phandle the external PHY node Internal PHY node: - compatible : Should be "qcom,fsm9900-emac-sgmii" or "qcom,qdf2432-emac-sgmii". diff --git a/Documentation/devicetree/bindings/phy/amlogic,meson-axg-mipi-pcie-analog.yaml b/Documentation/devicetree/bindings/phy/amlogic,meson-axg-mipi-pcie-analog.yaml index 4d01f3124e1c..a90fa1baadab 100644 --- a/Documentation/devicetree/bindings/phy/amlogic,meson-axg-mipi-pcie-analog.yaml +++ b/Documentation/devicetree/bindings/phy/amlogic,meson-axg-mipi-pcie-analog.yaml @@ -16,7 +16,7 @@ description: |+ - compatible: Should be the following: "amlogic,meson-gx-hhi-sysctrl", "simple-mfd", "syscon" - Refer to the the bindings described in + Refer to the bindings described in Documentation/devicetree/bindings/mfd/syscon.yaml properties: diff --git a/Documentation/devicetree/bindings/pinctrl/aspeed,ast2400-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/aspeed,ast2400-pinctrl.yaml index c689bea7ce6e..d3a8911728d0 100644 --- a/Documentation/devicetree/bindings/pinctrl/aspeed,ast2400-pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/aspeed,ast2400-pinctrl.yaml @@ -16,7 +16,7 @@ description: |+ - compatible: Should be one of the following: "aspeed,ast2400-scu", "syscon", "simple-mfd" - Refer to the the bindings described in + Refer to the bindings described in Documentation/devicetree/bindings/mfd/syscon.yaml properties: diff --git a/Documentation/devicetree/bindings/pinctrl/aspeed,ast2500-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/aspeed,ast2500-pinctrl.yaml index 9db904a528ee..5d2c1b1fb7fd 100644 --- a/Documentation/devicetree/bindings/pinctrl/aspeed,ast2500-pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/aspeed,ast2500-pinctrl.yaml @@ -17,7 +17,7 @@ description: |+ "aspeed,ast2500-scu", "syscon", "simple-mfd" "aspeed,g5-scu", "syscon", "simple-mfd" - Refer to the the bindings described in + Refer to the bindings described in Documentation/devicetree/bindings/mfd/syscon.yaml properties: diff --git a/Documentation/devicetree/bindings/pinctrl/aspeed,ast2600-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/aspeed,ast2600-pinctrl.yaml index 3666ac5b6518..e92686d2f062 100644 --- a/Documentation/devicetree/bindings/pinctrl/aspeed,ast2600-pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/aspeed,ast2600-pinctrl.yaml @@ -16,7 +16,7 @@ description: |+ - compatible: Should be one of the following: "aspeed,ast2600-scu", "syscon", "simple-mfd" - Refer to the the bindings described in + Refer to the bindings described in Documentation/devicetree/bindings/mfd/syscon.yaml properties: diff --git a/Documentation/devicetree/bindings/power/amlogic,meson-ee-pwrc.yaml b/Documentation/devicetree/bindings/power/amlogic,meson-ee-pwrc.yaml index f005abac7079..4e52ef33a986 100644 --- a/Documentation/devicetree/bindings/power/amlogic,meson-ee-pwrc.yaml +++ b/Documentation/devicetree/bindings/power/amlogic,meson-ee-pwrc.yaml @@ -17,7 +17,7 @@ description: |+ - compatible: Should be the following: "amlogic,meson-gx-hhi-sysctrl", "simple-mfd", "syscon" - Refer to the the bindings described in + Refer to the bindings described in Documentation/devicetree/bindings/mfd/syscon.yaml properties: diff --git a/Documentation/devicetree/bindings/powerpc/fsl/cpus.txt b/Documentation/devicetree/bindings/powerpc/fsl/cpus.txt index d63ab1dec16d..801c66069121 100644 --- a/Documentation/devicetree/bindings/powerpc/fsl/cpus.txt +++ b/Documentation/devicetree/bindings/powerpc/fsl/cpus.txt @@ -5,7 +5,7 @@ Copyright 2013 Freescale Semiconductor Inc. Power Architecture CPUs in Freescale SOCs are represented in device trees as per the definition in the Devicetree Specification. -In addition to the the Devicetree Specification definitions, the properties +In addition to the Devicetree Specification definitions, the properties defined below may be present on CPU nodes. PROPERTIES diff --git a/Documentation/devicetree/bindings/powerpc/opal/power-mgt.txt b/Documentation/devicetree/bindings/powerpc/opal/power-mgt.txt index 9d619e955576..d6658d3dd15e 100644 --- a/Documentation/devicetree/bindings/powerpc/opal/power-mgt.txt +++ b/Documentation/devicetree/bindings/powerpc/opal/power-mgt.txt @@ -39,7 +39,7 @@ otherwise. The length of all the property arrays must be the same. - ibm,cpu-idle-state-flags: Array of unsigned 32-bit values containing the values of the - flags associated with the the aforementioned idle-states. The + flags associated with the aforementioned idle-states. The flag bits are as follows: 0x00000001 /* Decrementer would stop */ 0x00000002 /* Needs timebase restore */ diff --git a/Documentation/devicetree/bindings/remoteproc/qcom,q6v5.txt b/Documentation/devicetree/bindings/remoteproc/qcom,q6v5.txt index f861862b9770..526e8f110d5c 100644 --- a/Documentation/devicetree/bindings/remoteproc/qcom,q6v5.txt +++ b/Documentation/devicetree/bindings/remoteproc/qcom,q6v5.txt @@ -37,7 +37,7 @@ on the Qualcomm Hexagon core. - interrupt-names: Usage: required Value type: <stringlist> - Definition: The interrupts needed depends on the the compatible + Definition: The interrupts needed depends on the compatible string: qcom,q6v5-pil: qcom,ipq8074-wcss-pil: diff --git a/Documentation/devicetree/bindings/sound/tlv320adcx140.yaml b/Documentation/devicetree/bindings/sound/tlv320adcx140.yaml index 2ad17b361db0..bc2fb1a80ed7 100644 --- a/Documentation/devicetree/bindings/sound/tlv320adcx140.yaml +++ b/Documentation/devicetree/bindings/sound/tlv320adcx140.yaml @@ -68,9 +68,9 @@ properties: array is defined as <PDMIN1 PDMIN2 PDMIN3 PDMIN4>. 0 - (default) Odd channel is latched on the negative edge and even - channel is latched on the the positive edge. + channel is latched on the positive edge. 1 - Odd channel is latched on the positive edge and even channel is - latched on the the negative edge. + latched on the negative edge. PDMIN1 - PDMCLK latching edge used for channel 1 and 2 data PDMIN2 - PDMCLK latching edge used for channel 3 and 4 data diff --git a/Documentation/devicetree/bindings/thermal/brcm,avs-ro-thermal.yaml b/Documentation/devicetree/bindings/thermal/brcm,avs-ro-thermal.yaml index 1ab5070c751d..89a2c32c0ab2 100644 --- a/Documentation/devicetree/bindings/thermal/brcm,avs-ro-thermal.yaml +++ b/Documentation/devicetree/bindings/thermal/brcm,avs-ro-thermal.yaml @@ -16,7 +16,7 @@ description: |+ - compatible: Should be one of the following: "brcm,bcm2711-avs-monitor", "syscon", "simple-mfd" - Refer to the the bindings described in + Refer to the bindings described in Documentation/devicetree/bindings/mfd/syscon.yaml properties: diff --git a/Documentation/devicetree/bindings/thermal/nvidia,tegra124-soctherm.txt b/Documentation/devicetree/bindings/thermal/nvidia,tegra124-soctherm.txt index db880e7ed713..aea4a2a178b9 100644 --- a/Documentation/devicetree/bindings/thermal/nvidia,tegra124-soctherm.txt +++ b/Documentation/devicetree/bindings/thermal/nvidia,tegra124-soctherm.txt @@ -96,7 +96,7 @@ critical trip point is reported back to the thermal framework to implement software shutdown. - the "hot" type trip points will be set to SOC_THERM hardware as the throttle -temperature. Once the the temperature of this thermal zone is higher +temperature. Once the temperature of this thermal zone is higher than it, it will trigger the HW throttle event. Example : diff --git a/Documentation/devicetree/bindings/thermal/rcar-thermal.yaml b/Documentation/devicetree/bindings/thermal/rcar-thermal.yaml index 927de79ab4b5..00dcbdd36144 100644 --- a/Documentation/devicetree/bindings/thermal/rcar-thermal.yaml +++ b/Documentation/devicetree/bindings/thermal/rcar-thermal.yaml @@ -42,7 +42,7 @@ properties: description: Address ranges of the thermal registers. If more then one range is given the first one must be the common registers followed by each sensor - according the the datasheet. + according the datasheet. minItems: 1 maxItems: 4
Fix typo in the comment Signed-off-by: Slark Xiao <slark_xiao@163.com> --- v2: Add all changes in one subsystem into 1 patch --- Documentation/devicetree/bindings/arm/msm/qcom,saw2.txt | 2 +- Documentation/devicetree/bindings/clock/ti/davinci/pll.txt | 2 +- Documentation/devicetree/bindings/fpga/fpga-region.txt | 2 +- Documentation/devicetree/bindings/gpio/gpio-pisosr.txt | 2 +- Documentation/devicetree/bindings/net/qcom-emac.txt | 2 +- .../bindings/phy/amlogic,meson-axg-mipi-pcie-analog.yaml | 2 +- .../devicetree/bindings/pinctrl/aspeed,ast2400-pinctrl.yaml | 2 +- .../devicetree/bindings/pinctrl/aspeed,ast2500-pinctrl.yaml | 2 +- .../devicetree/bindings/pinctrl/aspeed,ast2600-pinctrl.yaml | 2 +- .../devicetree/bindings/power/amlogic,meson-ee-pwrc.yaml | 2 +- Documentation/devicetree/bindings/powerpc/fsl/cpus.txt | 2 +- Documentation/devicetree/bindings/powerpc/opal/power-mgt.txt | 2 +- Documentation/devicetree/bindings/remoteproc/qcom,q6v5.txt | 2 +- Documentation/devicetree/bindings/sound/tlv320adcx140.yaml | 4 ++-- .../devicetree/bindings/thermal/brcm,avs-ro-thermal.yaml | 2 +- .../devicetree/bindings/thermal/nvidia,tegra124-soctherm.txt | 2 +- Documentation/devicetree/bindings/thermal/rcar-thermal.yaml | 2 +- 17 files changed, 18 insertions(+), 18 deletions(-)