| Message ID | 20220623170844.2189814-5-marcus.folkesson@gmail.com |
|---|---|
| State | Superseded, archived |
| Headers | show |
| Series | None | expand |
| Context | Check | Description |
|---|---|---|
| robh/checkpatch | success | |
| robh/patch-applied | success | |
| robh/dt-meta-schema | fail | build log |
On 23/06/2022 19:08, Marcus Folkesson wrote: > The Data Ready Output Pin is either hard wired to work as high > impedance or push-pull. Make it configurable. > > Signed-off-by: Marcus Folkesson <marcus.folkesson@gmail.com> > --- > .../devicetree/bindings/iio/adc/microchip,mcp3911.yaml | 8 ++++++++ > 1 file changed, 8 insertions(+) > > diff --git a/Documentation/devicetree/bindings/iio/adc/microchip,mcp3911.yaml b/Documentation/devicetree/bindings/iio/adc/microchip,mcp3911.yaml > index 95ab285f4eba..74b333e44bfd 100644 > --- a/Documentation/devicetree/bindings/iio/adc/microchip,mcp3911.yaml > +++ b/Documentation/devicetree/bindings/iio/adc/microchip,mcp3911.yaml > @@ -36,6 +36,14 @@ properties: > description: IRQ line of the ADC > maxItems: 1 > > + microchip,data-ready-hiz: > + description: > + Data Ready Pin Inactive State Control bit "Bit" of what? Do not describe the programming model but the actual feature. > + true = The DR pin state is high-impedance when data are NOT ready > + false = The DR pin state is a logic high when data are NOT ready > + type: boolean > + default: false You do not need default for bools. > + > microchip,device-addr: > description: Device address when multiple MCP3911 chips are present on the same SPI bus. > $ref: /schemas/types.yaml#/definitions/uint32 Best regards, Krzysztof
On Fri, Jun 24, 2022 at 11:54:58AM +0200, Krzysztof Kozlowski wrote: > > + microchip,data-ready-hiz: > > + description: > > + Data Ready Pin Inactive State Control bit > > "Bit" of what? Do not describe the programming model but the actual feature. > You are right. I will remove "bit". > > + true = The DR pin state is high-impedance when data are NOT ready > > + false = The DR pin state is a logic high when data are NOT ready > > + type: boolean > > + default: false > > You do not need default for bools. OK > > > + > > microchip,device-addr: > > description: Device address when multiple MCP3911 chips are present on the same SPI bus. > > $ref: /schemas/types.yaml#/definitions/uint32 > > > Best regards, > Krzysztof Thanks, Marcus Folkesson
On Thu, 23 Jun 2022 19:08:39 +0200, Marcus Folkesson wrote: > The Data Ready Output Pin is either hard wired to work as high > impedance or push-pull. Make it configurable. > > Signed-off-by: Marcus Folkesson <marcus.folkesson@gmail.com> > --- > .../devicetree/bindings/iio/adc/microchip,mcp3911.yaml | 8 ++++++++ > 1 file changed, 8 insertions(+) > My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check' on your patch (DT_CHECKER_FLAGS is new in v5.13): yamllint warnings/errors: dtschema/dtc warnings/errors: /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/iio/adc/microchip,mcp3911.yaml: properties:microchip,data-ready-hiz: 'oneOf' conditional failed, one must be fixed: Additional properties are not allowed ('default' was unexpected) hint: A vendor boolean property can use "type: boolean" /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/iio/adc/microchip,mcp3911.yaml: properties:microchip,data-ready-hiz: 'oneOf' conditional failed, one must be fixed: 'enum' is a required property 'const' is a required property hint: A vendor string property with exact values has an implicit type from schema $id: http://devicetree.org/meta-schemas/vendor-props.yaml# Additional properties are not allowed ('default', 'type' were unexpected) hint: A vendor string property with exact values has an implicit type /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/iio/adc/microchip,mcp3911.yaml: properties:microchip,data-ready-hiz: 'oneOf' conditional failed, one must be fixed: '$ref' is a required property 'allOf' is a required property hint: A vendor property needs a $ref to types.yaml from schema $id: http://devicetree.org/meta-schemas/vendor-props.yaml# hint: Vendor specific properties must have a type and description unless they have a defined, common suffix. from schema $id: http://devicetree.org/meta-schemas/vendor-props.yaml# /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/iio/adc/microchip,mcp3911.yaml: ignoring, error in schema: properties: microchip,data-ready-hiz Documentation/devicetree/bindings/iio/adc/microchip,mcp3911.example.dtb:0:0: /example-0/spi/adc@0: failed to match any schema with compatible: ['microchip,mcp3911'] doc reference errors (make refcheckdocs): See https://patchwork.ozlabs.org/patch/ This check can fail if there are any dependencies. The base for a patch series is generally the most recent rc1. If you already ran 'make dt_binding_check' and didn't see the above error(s), then make sure 'yamllint' is installed and dt-schema is up to date: pip3 install dtschema --upgrade Please check and re-submit.
diff --git a/Documentation/devicetree/bindings/iio/adc/microchip,mcp3911.yaml b/Documentation/devicetree/bindings/iio/adc/microchip,mcp3911.yaml index 95ab285f4eba..74b333e44bfd 100644 --- a/Documentation/devicetree/bindings/iio/adc/microchip,mcp3911.yaml +++ b/Documentation/devicetree/bindings/iio/adc/microchip,mcp3911.yaml @@ -36,6 +36,14 @@ properties: description: IRQ line of the ADC maxItems: 1 + microchip,data-ready-hiz: + description: + Data Ready Pin Inactive State Control bit + true = The DR pin state is high-impedance when data are NOT ready + false = The DR pin state is a logic high when data are NOT ready + type: boolean + default: false + microchip,device-addr: description: Device address when multiple MCP3911 chips are present on the same SPI bus. $ref: /schemas/types.yaml#/definitions/uint32
The Data Ready Output Pin is either hard wired to work as high impedance or push-pull. Make it configurable. Signed-off-by: Marcus Folkesson <marcus.folkesson@gmail.com> --- .../devicetree/bindings/iio/adc/microchip,mcp3911.yaml | 8 ++++++++ 1 file changed, 8 insertions(+)