diff mbox series

[7/9] dt-bindings: net: toshiba,visconti-dwmac: Update the common clock properties

Message ID 20220510015229.139818-8-nobuhiro1.iwamatsu@toshiba.co.jp
State Not Applicable, archived
Headers show
Series Visconti5: Update the clock providers | expand

Checks

Context Check Description
robh/checkpatch warning total: 0 errors, 1 warnings, 15 lines checked
robh/patch-applied success
robh/dtbs-check warning build log
robh/dt-meta-schema success

Commit Message

Nobuhiro Iwamatsu May 10, 2022, 1:52 a.m. UTC 
The clock for this driver switched to the common clock controller driver.
Therefore, update common clock properties for ethernet device in the binding
document.

Signed-off-by: Nobuhiro Iwamatsu <nobuhiro1.iwamatsu@toshiba.co.jp>
---
 .../devicetree/bindings/net/toshiba,visconti-dwmac.yaml        | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

Comments

Rob Herring (Arm) May 17, 2022, 8:47 p.m. UTC | #1 
On Tue, 10 May 2022 10:52:27 +0900, Nobuhiro Iwamatsu wrote:
> The clock for this driver switched to the common clock controller driver.
> Therefore, update common clock properties for ethernet device in the binding
> document.
> 
> Signed-off-by: Nobuhiro Iwamatsu <nobuhiro1.iwamatsu@toshiba.co.jp>
> ---
>  .../devicetree/bindings/net/toshiba,visconti-dwmac.yaml        | 3 ++-
>  1 file changed, 2 insertions(+), 1 deletion(-)
> 

Acked-by: Rob Herring <robh@kernel.org>
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/net/toshiba,visconti-dwmac.yaml b/Documentation/devicetree/bindings/net/toshiba,visconti-dwmac.yaml
index b12bfe61c67a..0988ed8d1c12 100644
--- a/Documentation/devicetree/bindings/net/toshiba,visconti-dwmac.yaml
+++ b/Documentation/devicetree/bindings/net/toshiba,visconti-dwmac.yaml
@@ -52,6 +52,7 @@  unevaluatedProperties: false
 
 examples:
   - |
+    #include <dt-bindings/clock/toshiba,tmpv770x.h>
     #include <dt-bindings/interrupt-controller/arm-gic.h>
 
     soc {
@@ -63,7 +64,7 @@  examples:
             reg = <0 0x28000000 0 0x10000>;
             interrupts = <GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH>;
             interrupt-names = "macirq";
-            clocks = <&clk300mhz>, <&clk125mhz>;
+            clocks = <&pismu TMPV770X_CLK_PIETHER_BUS>, <&pismu TMPV770X_CLK_PIETHER_125M>;
             clock-names = "stmmaceth", "phy_ref_clk";
             snps,txpbl = <4>;
             snps,rxpbl = <4>;