diff mbox series

[3/4] dt-bindings: firmware: qcom-scm: Document msm8976 bindings

Message ID 20220305164906.16853-4-a39.skl@gmail.com
State Not Applicable, archived
Headers show
Series *** Add SCM and mailbox support on MSM8976 *** | expand

Checks

Context Check Description
robh/patch-applied success
robh/checkpatch success
robh/dtbs-check success
robh/dt-meta-schema success

Commit Message

Adam Skladowski March 5, 2022, 4:49 p.m. UTC
SCM driver on MSM8976 requires 3 clocks.
Signed-off-by: Adam Skladowski <a39.skl@gmail.com>
---
 Documentation/devicetree/bindings/firmware/qcom,scm.txt | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

Comments

Krzysztof Kozlowski March 5, 2022, 9:12 p.m. UTC | #1
On 05/03/2022 17:49, Adam Skladowski wrote:
> SCM driver on MSM8976 requires 3 clocks.
> Signed-off-by: Adam Skladowski <a39.skl@gmail.com>
> ---
>  Documentation/devicetree/bindings/firmware/qcom,scm.txt | 3 ++-
>  1 file changed, 2 insertions(+), 1 deletion(-)
> 

Same as in other patches - missing blank line before SoB.

With that fixed:

Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>


Best regards,
Krzysztof
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/firmware/qcom,scm.txt b/Documentation/devicetree/bindings/firmware/qcom,scm.txt
index b1cd4ad1889ae..0f4e5ab264779 100644
--- a/Documentation/devicetree/bindings/firmware/qcom,scm.txt
+++ b/Documentation/devicetree/bindings/firmware/qcom,scm.txt
@@ -19,6 +19,7 @@  Required properties:
  * "qcom,scm-msm8953"
  * "qcom,scm-msm8960"
  * "qcom,scm-msm8974"
+ * "qcom,scm-msm8976"
  * "qcom,scm-msm8994"
  * "qcom,scm-msm8996"
  * "qcom,scm-msm8998"
@@ -37,7 +38,7 @@  Required properties:
  * core clock required for "qcom,scm-apq8064", "qcom,scm-msm8660" and
    "qcom,scm-msm8960"
  * core, iface and bus clocks required for "qcom,scm-apq8084",
-   "qcom,scm-msm8916", "qcom,scm-msm8953" and "qcom,scm-msm8974"
+   "qcom,scm-msm8916", "qcom,scm-msm8953", "qcom,scm-msm8974" and "qcom,scm-msm8976"
 - clock-names: Must contain "core" for the core clock, "iface" for the interface
   clock and "bus" for the bus clock per the requirements of the compatible.
 - qcom,dload-mode: phandle to the TCSR hardware block and offset of the