diff mbox series

[1/2] dt-bindings: arm: imx: add Protonic PRT8MM board compatible

Message ID 20211213203909.1260909-1-l.stach@pengutronix.de
State Not Applicable, archived
Headers show
Series [1/2] dt-bindings: arm: imx: add Protonic PRT8MM board compatible | expand

Checks

Context Check Description
robh/checkpatch warning total: 0 errors, 1 warnings, 7 lines checked
robh/dtbs-check warning build log
robh/dt-meta-schema success

Commit Message

Lucas Stach Dec. 13, 2021, 8:39 p.m. UTC 
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
---
 Documentation/devicetree/bindings/arm/fsl.yaml | 1 +
 1 file changed, 1 insertion(+)

Comments

Rob Herring (Arm) Dec. 15, 2021, 8:27 p.m. UTC | #1 
On Mon, 13 Dec 2021 21:39:08 +0100, Lucas Stach wrote:
> Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
> ---
>  Documentation/devicetree/bindings/arm/fsl.yaml | 1 +
>  1 file changed, 1 insertion(+)
> 

Acked-by: Rob Herring <robh@kernel.org>
Shawn Guo Dec. 16, 2021, 8:04 a.m. UTC | #2 
On Mon, Dec 13, 2021 at 09:39:08PM +0100, Lucas Stach wrote:
> Signed-off-by: Lucas Stach <l.stach@pengutronix.de>

Please do not leave commit log empty.

Shawn

> ---
>  Documentation/devicetree/bindings/arm/fsl.yaml | 1 +
>  1 file changed, 1 insertion(+)
> 
> diff --git a/Documentation/devicetree/bindings/arm/fsl.yaml b/Documentation/devicetree/bindings/arm/fsl.yaml
> index 0b595b26061f..645ceb271405 100644
> --- a/Documentation/devicetree/bindings/arm/fsl.yaml
> +++ b/Documentation/devicetree/bindings/arm/fsl.yaml
> @@ -732,6 +732,7 @@ properties:
>                - gw,imx8mm-gw7902          # i.MX8MM Gateworks Board
>                - kontron,imx8mm-n801x-som  # i.MX8MM Kontron SL (N801X) SOM
>                - variscite,var-som-mx8mm   # i.MX8MM Variscite VAR-SOM-MX8MM module
> +              - prt,prt8mm                # i.MX8MM Protonic PRT8MM Board
>            - const: fsl,imx8mm
>  
>        - description: Engicam i.Core MX8M Mini SoM based boards
> -- 
> 2.30.2
>
Shawn Guo Dec. 16, 2021, 8:06 a.m. UTC | #3 
On Mon, Dec 13, 2021 at 09:39:09PM +0100, Lucas Stach wrote:
> From: David Jander <david@protonic.nl>
> 
> The Protonic PRT8MM is a low-cost agricultural Virtual Terminal. This
> commit adds most of the board functionality sans the display output,
> as the i.MX8MM display support isn't ready yet.
> 
> Signed-off-by: David Jander <david@protonic.nl>
> Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
> ---
>  .../boot/dts/freescale/imx8mm-prt8mm.dts      | 304 ++++++++++++++++++
>  1 file changed, 304 insertions(+)
>  create mode 100644 arch/arm64/boot/dts/freescale/imx8mm-prt8mm.dts
> 
> diff --git a/arch/arm64/boot/dts/freescale/imx8mm-prt8mm.dts b/arch/arm64/boot/dts/freescale/imx8mm-prt8mm.dts
> new file mode 100644
> index 000000000000..f83bfebd534d
> --- /dev/null
> +++ b/arch/arm64/boot/dts/freescale/imx8mm-prt8mm.dts
> @@ -0,0 +1,304 @@
> +// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
> +/*
> + * Copyright 2020 Protonic Holland
> + * Copyright 2019 NXP
> + */
> +
> +/dts-v1/;
> +
> +#include <dt-bindings/usb/pd.h>
> +#include "imx8mm.dtsi"
> +
> +/ {
> +	model = "Protonic PRT8MM";
> +	compatible = "prt,prt8mm", "fsl,imx8mm";
> +
> +	chosen {
> +		stdout-path = &uart4;
> +	};
> +
> +	memory@40000000 {
> +		device_type = "memory";
> +		reg = <0x0 0x40000000 0 0x40000000>;
> +	};
> +
> +	leds {
> +		compatible = "gpio-leds";
> +		pinctrl-names = "default";
> +		pinctrl-0 = <&pinctrl_gpio_leds>;
> +
> +		debug-led0 {
> +			label = "DEBUG_LED0";
> +			gpios = <&gpio3 0 GPIO_ACTIVE_HIGH>;
> +			linux,default-trigger = "heartbeat";
> +		};
> +
> +		debug-led1 {
> +			label = "DEBUG_LED1";
> +			gpios = <&gpio3 1 GPIO_ACTIVE_HIGH>;
> +			linux,default-trigger = "cpu";
> +		};
> +	};
> +
> +	sound-ssm2518 {
> +		compatible = "simple-audio-card";
> +		simple-audio-card,name = "ssm2518-audio";
> +		simple-audio-card,format = "i2s";
> +		simple-audio-card,frame-master = <&cpudai>;
> +		simple-audio-card,bitclock-master = <&cpudai>;
> +
> +		cpudai: simple-audio-card,cpu {
> +			sound-dai = <&sai3>;
> +		};
> +
> +		simple-audio-card,codec {
> +			sound-dai = <&ssm2518>;
> +			clocks = <&clk IMX8MM_CLK_SAI3_ROOT>;
> +		};
> +	};
> +};
> +
> +&i2c1 {
> +	clock-frequency = <400000>;
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&pinctrl_i2c1>;
> +	status = "okay";
> +
> +	ssm2518: codec@34 {

audio-codec for node name.

Shawn

> +		compatible = "adi,ssm2518";
> +		reg = <0x34>;
> +		#sound-dai-cells = <0>;
> +	};
> +};
> +
> +&i2c2 {
> +	clock-frequency = <400000>;
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&pinctrl_i2c2>;
> +	status = "okay";
> +
> +	regulator@60 {
> +		compatible = "fcs,fan53555";
> +		reg = <0x60>;
> +		regulator-name = "0V9_CORE";
> +		regulator-min-microvolt = <900000>;
> +		regulator-max-microvolt = <980000>;
> +		regulator-boot-on;
> +		regulator-always-on;
> +	};
> +};
> +
> +&i2c3 {
> +	clock-frequency = <400000>;
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&pinctrl_i2c3>;
> +	status = "okay";
> +
> +	rtc@51 {
> +		compatible = "nxp,pcf85363";
> +		reg = <0x51>;
> +	};
> +
> +	temp-sense@70 {
> +		compatible = "ti,tmp103";
> +		reg = <0x70>;
> +	};
> +
> +	touchscreeen@5d {
> +		compatible = "goodix,gt911";
> +		reg = <0x5d>;
> +		pinctrl-names = "default";
> +		pinctrl-0 = <&pinctrl_touchscreen>;
> +		interrupt-parent = <&gpio1>;
> +		interrupts = <8 IRQ_TYPE_NONE>;
> +		irq-gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>;
> +		reset-gpios = <&gpio1 9 GPIO_ACTIVE_HIGH>;
> +	};
> +};
> +
> +&sai3 {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&pinctrl_sai3>;
> +	assigned-clocks = <&clk IMX8MM_CLK_SAI3>;
> +	assigned-clock-parents = <&clk IMX8MM_AUDIO_PLL1_OUT>;
> +	assigned-clock-rates = <12288000>;
> +	fsl,sai-mclk-direction-output;
> +	fsl,sai-asynchronous;
> +	status = "okay";
> +};
> +
> +&snvs_pwrkey {
> +	status = "okay";
> +};
> +
> +&uart4 {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&pinctrl_uart4>;
> +	status = "okay";
> +};
> +
> +&usbotg1 {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&pinctrl_usbotg1>;
> +	dr_mode = "host";
> +	disable-over-current;
> +	power-active-high;
> +	status = "okay";
> +};
> +
> +&usdhc2 {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&pinctrl_usdhc2>;
> +	assigned-clocks = <&clk IMX8MM_CLK_USDHC2>;
> +	assigned-clock-rates = <100000000>;
> +	cd-gpios = <&gpio2 12 GPIO_ACTIVE_LOW>;
> +	bus-width = <4>;
> +	status = "okay";
> +};
> +
> +&usdhc3 {
> +	pinctrl-names = "default", "state_100mhz", "state_200mhz";
> +	pinctrl-0 = <&pinctrl_usdhc3>;
> +	pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
> +	pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
> +	assigned-clocks = <&clk IMX8MM_CLK_USDHC3_ROOT>;
> +	assigned-clock-rates = <400000000>;
> +	bus-width = <8>;
> +	non-removable;
> +	no-sdio;
> +	no-sd;
> +	status = "okay";
> +};
> +
> +&wdog1 {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&pinctrl_wdog>;
> +	fsl,ext-reset-output;
> +	status = "okay";
> +};
> +
> +&iomuxc {
> +	pinctrl_gpio_leds: ledsgrp {
> +		fsl,pins = <
> +			MX8MM_IOMUXC_NAND_ALE_GPIO3_IO0			0x00
> +			MX8MM_IOMUXC_NAND_CE0_B_GPIO3_IO1		0x00
> +		>;
> +	};
> +
> +	pinctrl_i2c1: i2c1grp {
> +		fsl,pins = <
> +			MX8MM_IOMUXC_I2C1_SCL_I2C1_SCL			0x400000c3
> +			MX8MM_IOMUXC_I2C1_SDA_I2C1_SDA			0x400000c3
> +		>;
> +	};
> +
> +	pinctrl_i2c2: i2c2grp {
> +		fsl,pins = <
> +			MX8MM_IOMUXC_I2C2_SCL_I2C2_SCL			0x400000c3
> +			MX8MM_IOMUXC_I2C2_SDA_I2C2_SDA			0x400000c3
> +		>;
> +	};
> +
> +	pinctrl_i2c3: i2c3grp {
> +		fsl,pins = <
> +			MX8MM_IOMUXC_I2C3_SCL_I2C3_SCL			0x400000c3
> +			MX8MM_IOMUXC_I2C3_SDA_I2C3_SDA			0x400000c3
> +		>;
> +	};
> +
> +	pinctrl_sai3: sai3grp {
> +		fsl,pins = <
> +			MX8MM_IOMUXC_SAI3_TXFS_SAI3_TX_SYNC		0xd6
> +			MX8MM_IOMUXC_SAI3_TXC_SAI3_TX_BCLK		0xd6
> +			MX8MM_IOMUXC_SAI3_MCLK_SAI3_MCLK		0xd6
> +			MX8MM_IOMUXC_SAI3_TXD_SAI3_TX_DATA0		0xd6
> +		>;
> +	};
> +
> +	pinctrl_touchscreen: tsgrp {
> +		fsl,pins = <
> +			MX8MM_IOMUXC_GPIO1_IO08_GPIO1_IO8		0x80
> +			MX8MM_IOMUXC_GPIO1_IO09_GPIO1_IO9		0x80
> +		>;
> +	};
> +
> +	pinctrl_uart4: uart4grp {
> +		fsl,pins = <
> +			MX8MM_IOMUXC_UART4_RXD_UART4_DCE_RX		0x040
> +			MX8MM_IOMUXC_UART4_TXD_UART4_DCE_TX		0x040
> +		>;
> +	};
> +
> +	pinctrl_usbotg1: usbotg1grp {
> +		fsl,pins = <
> +			MX8MM_IOMUXC_GPIO1_IO12_USB1_OTG_PWR		0x000
> +			MX8MM_IOMUXC_GPIO1_IO13_USB1_OTG_OC		0x000
> +		>;
> +	};
> +
> +	pinctrl_usdhc2: usdhc2grp {
> +		fsl,pins = <
> +			MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK			0x190
> +			MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD			0x1d0
> +			MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0		0x1d0
> +			MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1		0x1d0
> +			MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2		0x1d0
> +			MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3		0x1d0
> +			MX8MM_IOMUXC_SD2_CD_B_GPIO2_IO12		0x0d4
> +		>;
> +	};
> +
> +	pinctrl_usdhc3: usdhc3grp {
> +		fsl,pins = <
> +			MX8MM_IOMUXC_NAND_WE_B_USDHC3_CLK		0x190
> +			MX8MM_IOMUXC_NAND_WP_B_USDHC3_CMD		0x1d0
> +			MX8MM_IOMUXC_NAND_DATA04_USDHC3_DATA0		0x1d0
> +			MX8MM_IOMUXC_NAND_DATA05_USDHC3_DATA1		0x1d0
> +			MX8MM_IOMUXC_NAND_DATA06_USDHC3_DATA2		0x1d0
> +			MX8MM_IOMUXC_NAND_DATA07_USDHC3_DATA3		0x1d0
> +			MX8MM_IOMUXC_NAND_RE_B_USDHC3_DATA4		0x1d0
> +			MX8MM_IOMUXC_NAND_CE2_B_USDHC3_DATA5		0x1d0
> +			MX8MM_IOMUXC_NAND_CE3_B_USDHC3_DATA6		0x1d0
> +			MX8MM_IOMUXC_NAND_CLE_USDHC3_DATA7		0x1d0
> +			MX8MM_IOMUXC_NAND_CE1_B_USDHC3_STROBE		0x190
> +		>;
> +	};
> +
> +	pinctrl_usdhc3_100mhz: usdhc3grp100mhz {
> +		fsl,pins = <
> +			MX8MM_IOMUXC_NAND_WE_B_USDHC3_CLK		0x194
> +			MX8MM_IOMUXC_NAND_WP_B_USDHC3_CMD		0x1d4
> +			MX8MM_IOMUXC_NAND_DATA04_USDHC3_DATA0		0x1d4
> +			MX8MM_IOMUXC_NAND_DATA05_USDHC3_DATA1		0x1d4
> +			MX8MM_IOMUXC_NAND_DATA06_USDHC3_DATA2		0x1d4
> +			MX8MM_IOMUXC_NAND_DATA07_USDHC3_DATA3		0x1d4
> +			MX8MM_IOMUXC_NAND_RE_B_USDHC3_DATA4		0x1d4
> +			MX8MM_IOMUXC_NAND_CE2_B_USDHC3_DATA5		0x1d4
> +			MX8MM_IOMUXC_NAND_CE3_B_USDHC3_DATA6		0x1d4
> +			MX8MM_IOMUXC_NAND_CLE_USDHC3_DATA7		0x1d4
> +			MX8MM_IOMUXC_NAND_CE1_B_USDHC3_STROBE		0x194
> +		>;
> +	};
> +
> +	pinctrl_usdhc3_200mhz: usdhc3grp200mhz {
> +		fsl,pins = <
> +			MX8MM_IOMUXC_NAND_WE_B_USDHC3_CLK		0x196
> +			MX8MM_IOMUXC_NAND_WP_B_USDHC3_CMD		0x1d6
> +			MX8MM_IOMUXC_NAND_DATA04_USDHC3_DATA0		0x1d6
> +			MX8MM_IOMUXC_NAND_DATA05_USDHC3_DATA1		0x1d6
> +			MX8MM_IOMUXC_NAND_DATA06_USDHC3_DATA2		0x1d6
> +			MX8MM_IOMUXC_NAND_DATA07_USDHC3_DATA3		0x1d6
> +			MX8MM_IOMUXC_NAND_RE_B_USDHC3_DATA4		0x1d6
> +			MX8MM_IOMUXC_NAND_CE2_B_USDHC3_DATA5		0x1d6
> +			MX8MM_IOMUXC_NAND_CE3_B_USDHC3_DATA6		0x1d6
> +			MX8MM_IOMUXC_NAND_CLE_USDHC3_DATA7		0x1d6
> +			MX8MM_IOMUXC_NAND_CE1_B_USDHC3_STROBE		0x196
> +		>;
> +	};
> +
> +	pinctrl_wdog: wdoggrp {
> +		fsl,pins = <
> +			MX8MM_IOMUXC_GPIO1_IO02_WDOG1_WDOG_B		0xc6
> +		>;
> +	};
> +};
> -- 
> 2.30.2
>
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/arm/fsl.yaml b/Documentation/devicetree/bindings/arm/fsl.yaml
index 0b595b26061f..645ceb271405 100644
--- a/Documentation/devicetree/bindings/arm/fsl.yaml
+++ b/Documentation/devicetree/bindings/arm/fsl.yaml
@@ -732,6 +732,7 @@  properties:
               - gw,imx8mm-gw7902          # i.MX8MM Gateworks Board
               - kontron,imx8mm-n801x-som  # i.MX8MM Kontron SL (N801X) SOM
               - variscite,var-som-mx8mm   # i.MX8MM Variscite VAR-SOM-MX8MM module
+              - prt,prt8mm                # i.MX8MM Protonic PRT8MM Board
           - const: fsl,imx8mm
 
       - description: Engicam i.Core MX8M Mini SoM based boards