diff mbox series

[1/2] dt-bindings: gpio: Add binding documentation for modepin

Message ID 20210615080553.2021061-2-piyush.mehta@xilinx.com
State Changes Requested
Headers show
Series gpio: modepin: Add driver support for modepin GPIO controller | expand

Checks

Context Check Description
robh/checkpatch success
robh/dt-meta-schema success
robh/dtbs-check success

Commit Message

Piyush Mehta June 15, 2021, 8:05 a.m. UTC
Add DT binding document for modepin GPIO controller.

Signed-off-by: Piyush Mehta <piyush.mehta@xilinx.com>
State: pending
---
 .../bindings/gpio/xlnx,zynqmp-gpio-modepin.yaml    | 41 ++++++++++++++++++++++
 1 file changed, 41 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/gpio/xlnx,zynqmp-gpio-modepin.yaml

Comments

Michal Simek June 15, 2021, 10:28 a.m. UTC | #1
On 6/15/21 10:05 AM, Piyush Mehta wrote:
> Add DT binding document for modepin GPIO controller.
> 
> Signed-off-by: Piyush Mehta <piyush.mehta@xilinx.com>
> State: pending

note: this shouldn't be the part of commit message.
But please wait when dt guys review this file and then send v2.

M

> ---
>  .../bindings/gpio/xlnx,zynqmp-gpio-modepin.yaml    | 41 ++++++++++++++++++++++
>  1 file changed, 41 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/gpio/xlnx,zynqmp-gpio-modepin.yaml
> 
> diff --git a/Documentation/devicetree/bindings/gpio/xlnx,zynqmp-gpio-modepin.yaml b/Documentation/devicetree/bindings/gpio/xlnx,zynqmp-gpio-modepin.yaml
> new file mode 100644
> index 0000000..39d78f8
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/gpio/xlnx,zynqmp-gpio-modepin.yaml
> @@ -0,0 +1,41 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: "http://devicetree.org/schemas/gpio/xlnx,zynqmp-gpio-modepin.yaml#"
> +$schema: "http://devicetree.org/meta-schemas/core.yaml#"
> +
> +title: ZynqMP Mode Pin GPIO controller
> +
> +description:
> +  PS_MODE is 4-bits boot mode pins sampled on POR deassertion. Mode Pin
> +  GPIO controller with configurable from numbers of pins (from 0 to 3 per
> +  PS_MODE). Every pin can be configured as input/output.
> +
> +maintainers:
> +  - Piyush Mehta <piyush.mehta@xilinx.com>
> +
> +properties:
> +  compatible:
> +    const: xlnx,zynqmp-gpio-modepin
> +
> +  gpio-controller: true
> +
> +  "#gpio-cells":
> +    const: 2
> +
> +required:
> +  - compatible
> +  - gpio-controller
> +  - "#gpio-cells"
> +
> +additionalProperties: false
> +
> +examples:
> +  - |
> +    modepin_gpio: gpio {
> +        compatible = "xlnx,zynqmp-gpio-modepin";
> +        gpio-controller;
> +        #gpio-cells = <2>;
> +    };
> +
> +...
>
Rob Herring June 24, 2021, 8:50 p.m. UTC | #2
On Tue, Jun 15, 2021 at 01:35:52PM +0530, Piyush Mehta wrote:
> Add DT binding document for modepin GPIO controller.

Please give some indication in the subject this is for Xilinx.

> 
> Signed-off-by: Piyush Mehta <piyush.mehta@xilinx.com>
> State: pending
> ---
>  .../bindings/gpio/xlnx,zynqmp-gpio-modepin.yaml    | 41 ++++++++++++++++++++++
>  1 file changed, 41 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/gpio/xlnx,zynqmp-gpio-modepin.yaml
> 
> diff --git a/Documentation/devicetree/bindings/gpio/xlnx,zynqmp-gpio-modepin.yaml b/Documentation/devicetree/bindings/gpio/xlnx,zynqmp-gpio-modepin.yaml
> new file mode 100644
> index 0000000..39d78f8
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/gpio/xlnx,zynqmp-gpio-modepin.yaml
> @@ -0,0 +1,41 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: "http://devicetree.org/schemas/gpio/xlnx,zynqmp-gpio-modepin.yaml#"
> +$schema: "http://devicetree.org/meta-schemas/core.yaml#"
> +
> +title: ZynqMP Mode Pin GPIO controller
> +
> +description:
> +  PS_MODE is 4-bits boot mode pins sampled on POR deassertion. Mode Pin
> +  GPIO controller with configurable from numbers of pins (from 0 to 3 per
> +  PS_MODE). Every pin can be configured as input/output.

And connected to other functions like GPIOs?

> +
> +maintainers:
> +  - Piyush Mehta <piyush.mehta@xilinx.com>
> +
> +properties:
> +  compatible:
> +    const: xlnx,zynqmp-gpio-modepin
> +
> +  gpio-controller: true
> +
> +  "#gpio-cells":
> +    const: 2
> +
> +required:
> +  - compatible
> +  - gpio-controller
> +  - "#gpio-cells"
> +
> +additionalProperties: false
> +
> +examples:
> +  - |
> +    modepin_gpio: gpio {

Drop unused labels.

> +        compatible = "xlnx,zynqmp-gpio-modepin";
> +        gpio-controller;
> +        #gpio-cells = <2>;

How does one access this h/w?

> +    };
> +
> +...
> -- 
> 2.7.4
> 
>
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/gpio/xlnx,zynqmp-gpio-modepin.yaml b/Documentation/devicetree/bindings/gpio/xlnx,zynqmp-gpio-modepin.yaml
new file mode 100644
index 0000000..39d78f8
--- /dev/null
+++ b/Documentation/devicetree/bindings/gpio/xlnx,zynqmp-gpio-modepin.yaml
@@ -0,0 +1,41 @@ 
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/gpio/xlnx,zynqmp-gpio-modepin.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: ZynqMP Mode Pin GPIO controller
+
+description:
+  PS_MODE is 4-bits boot mode pins sampled on POR deassertion. Mode Pin
+  GPIO controller with configurable from numbers of pins (from 0 to 3 per
+  PS_MODE). Every pin can be configured as input/output.
+
+maintainers:
+  - Piyush Mehta <piyush.mehta@xilinx.com>
+
+properties:
+  compatible:
+    const: xlnx,zynqmp-gpio-modepin
+
+  gpio-controller: true
+
+  "#gpio-cells":
+    const: 2
+
+required:
+  - compatible
+  - gpio-controller
+  - "#gpio-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    modepin_gpio: gpio {
+        compatible = "xlnx,zynqmp-gpio-modepin";
+        gpio-controller;
+        #gpio-cells = <2>;
+    };
+
+...