From patchwork Thu Nov 12 04:50:20 2020 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Florian Fainelli X-Patchwork-Id: 1398693 Return-Path: X-Original-To: incoming-dt@patchwork.ozlabs.org Delivered-To: patchwork-incoming-dt@bilbo.ozlabs.org Authentication-Results: ozlabs.org; spf=pass (sender SPF authorized) smtp.mailfrom=vger.kernel.org (client-ip=23.128.96.18; helo=vger.kernel.org; envelope-from=devicetree-owner@vger.kernel.org; receiver=) Authentication-Results: ozlabs.org; dmarc=pass (p=none dis=none) header.from=gmail.com Authentication-Results: ozlabs.org; dkim=pass (2048-bit key; unprotected) header.d=gmail.com header.i=@gmail.com header.a=rsa-sha256 header.s=20161025 header.b=JhzIVeWx; dkim-atps=neutral Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by ozlabs.org (Postfix) with ESMTP id 4CWrBy09dkz9sTK for ; Thu, 12 Nov 2020 16:44:26 +1100 (AEDT) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1728126AbgKLFdO (ORCPT ); Thu, 12 Nov 2020 00:33:14 -0500 Received: from lindbergh.monkeyblade.net ([23.128.96.19]:54544 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1729118AbgKLEwy (ORCPT ); Wed, 11 Nov 2020 23:52:54 -0500 Received: from mail-pf1-x42e.google.com (mail-pf1-x42e.google.com [IPv6:2607:f8b0:4864:20::42e]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id 96434C061A4B; Wed, 11 Nov 2020 20:51:54 -0800 (PST) Received: by mail-pf1-x42e.google.com with SMTP id g7so3394766pfc.2; Wed, 11 Nov 2020 20:51:54 -0800 (PST) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=gmail.com; s=20161025; h=from:to:cc:subject:date:message-id:in-reply-to:references :mime-version:content-transfer-encoding; bh=WhuYA1a6TERII5H+wgmmnG4EhgqA+DZXglaNonkZwz4=; b=JhzIVeWx81eexEi3AeJHg1mMK3yPoixKMojlX1N72qHq4lnFoP568Iq7SE+/46h/2b Z0H0tW+eQO5KoelEREnWBJ1He2sDnsijEiyP+7JoeR4+640Q4ZAT5Knxe9X5aAmmEjxR 6UcCwLPJ4M6qBQPjpzlQZkpP589pgrgAS8ZUGNM1LAurqrKC/W3vdOpZOtZq6bQyd03r o0zTZd+xYEFnbPZNT42LHYfGyyhDZgDGAqBzxQli3q//asxWmtzO60ihmTTQsUl/b7av ZBTa/B6KvyKLfv3ySQ6BCiYo+HuH7TJNi8TX524c4ol/CidOZiZLnCg77GUBWXhp3lSS oUxw== X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20161025; h=x-gm-message-state:from:to:cc:subject:date:message-id:in-reply-to :references:mime-version:content-transfer-encoding; bh=WhuYA1a6TERII5H+wgmmnG4EhgqA+DZXglaNonkZwz4=; b=pAM4s70iYXs0+xGnTRvUKOCu74UtXFUvVblzySMJvgTYIScyiHIcrvkQP+FZKwfHA/ VgTbNMPKAuYkX7dVI6wcQ02OyTB9Ppc9pfEKDVX5OC0SDA6uKClGkfiyNNRWPJQgpAsS S/72xQ6XdPMrFaZcEKT3XYAtgXuXRN5uZ29ufFaG761sUAFuqYJVcLHsCgUKt3uNbd0q KjhhjphNYxyhDswftYDsbaepHfUi/AY/o+ovCqRpkYM3CO5gGL1z6rAEZQh/ESoXZU1L 9cPVW3fiTpbwu1W5BqsXAcz21nPnzULBrQW0H5zdSQdpfi1LeHzR81ymEMPQarrsRYIq IDUw== X-Gm-Message-State: AOAM533jO9vWXPmZUdgkXtOXYe/GXSBBNXeYK/2QqwEQYBMqNqj/bgB6 1kvJnXoJqoIsMnFDzKFLAhY= X-Google-Smtp-Source: ABdhPJyQJfGr595gk9r5bWUCaSBbmEGS7XMmoDf64r3aRYSfVqpN94GQLFOwmfTsAK59x3VdGMAMVQ== X-Received: by 2002:a17:90a:5b16:: with SMTP id o22mr7824361pji.224.1605156714133; Wed, 11 Nov 2020 20:51:54 -0800 (PST) Received: from 1G5JKC2.Broadcom.net ([192.19.223.252]) by smtp.gmail.com with ESMTPSA id gk22sm4189087pjb.39.2020.11.11.20.51.45 (version=TLS1_3 cipher=TLS_AES_256_GCM_SHA384 bits=256/256); Wed, 11 Nov 2020 20:51:53 -0800 (PST) From: Florian Fainelli To: linux-arm-kernel@lists.infradead.org Cc: Kurt Kanzenbach , Rob Herring , Florian Fainelli , Andrew Lunn , Vivien Didelot , Vladimir Oltean , "David S. Miller" , Jakub Kicinski , Rob Herring , Ray Jui , Scott Branden , bcm-kernel-feedback-list@broadcom.com (maintainer:BROADCOM IPROC ARM ARCHITECTURE), Hauke Mehrtens , =?utf-8?b?UmFmYcWCIE1p?= =?utf-8?b?xYJlY2tp?= , netdev@vger.kernel.org (open list:NETWORKING DRIVERS), devicetree@vger.kernel.org (open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS), linux-kernel@vger.kernel.org (open list) Subject: [PATCH v2 10/10] dt-bindings: net: dsa: b53: Add YAML bindings Date: Wed, 11 Nov 2020 20:50:20 -0800 Message-Id: <20201112045020.9766-11-f.fainelli@gmail.com> X-Mailer: git-send-email 2.25.1 In-Reply-To: <20201112045020.9766-1-f.fainelli@gmail.com> References: <20201112045020.9766-1-f.fainelli@gmail.com> MIME-Version: 1.0 Precedence: bulk List-ID: X-Mailing-List: devicetree@vger.kernel.org From: Kurt Kanzenbach Convert the b53 DSA device tree bindings to YAML in order to allow for automatic checking and such. Reviewed-by: Rob Herring Suggested-by: Florian Fainelli Signed-off-by: Kurt Kanzenbach --- .../devicetree/bindings/net/dsa/b53.txt | 149 ----------- .../devicetree/bindings/net/dsa/brcm,b53.yaml | 249 ++++++++++++++++++ MAINTAINERS | 2 +- 3 files changed, 250 insertions(+), 150 deletions(-) delete mode 100644 Documentation/devicetree/bindings/net/dsa/b53.txt create mode 100644 Documentation/devicetree/bindings/net/dsa/brcm,b53.yaml diff --git a/Documentation/devicetree/bindings/net/dsa/b53.txt b/Documentation/devicetree/bindings/net/dsa/b53.txt deleted file mode 100644 index f1487a751b1a..000000000000 --- a/Documentation/devicetree/bindings/net/dsa/b53.txt +++ /dev/null @@ -1,149 +0,0 @@ -Broadcom BCM53xx Ethernet switches -================================== - -Required properties: - -- compatible: For external switch chips, compatible string must be exactly one - of: "brcm,bcm5325" - "brcm,bcm53115" - "brcm,bcm53125" - "brcm,bcm53128" - "brcm,bcm5365" - "brcm,bcm5395" - "brcm,bcm5389" - "brcm,bcm5397" - "brcm,bcm5398" - - For the BCM11360 SoC, must be: - "brcm,bcm11360-srab" and the mandatory "brcm,cygnus-srab" string - - For the BCM5310x SoCs with an integrated switch, must be one of: - "brcm,bcm53010-srab" - "brcm,bcm53011-srab" - "brcm,bcm53012-srab" - "brcm,bcm53018-srab" - "brcm,bcm53019-srab" and the mandatory "brcm,bcm5301x-srab" string - - For the BCM5831X/BCM1140x SoCs with an integrated switch, must be one of: - "brcm,bcm11404-srab" - "brcm,bcm11407-srab" - "brcm,bcm11409-srab" - "brcm,bcm58310-srab" - "brcm,bcm58311-srab" - "brcm,bcm58313-srab" and the mandatory "brcm,omega-srab" string - - For the BCM585xx/586XX/88312 SoCs with an integrated switch, must be one of: - "brcm,bcm58522-srab" - "brcm,bcm58523-srab" - "brcm,bcm58525-srab" - "brcm,bcm58622-srab" - "brcm,bcm58623-srab" - "brcm,bcm58625-srab" - "brcm,bcm88312-srab" and the mandatory "brcm,nsp-srab string - - For the BCM63xx/33xx SoCs with an integrated switch, must be one of: - "brcm,bcm3384-switch" - "brcm,bcm6328-switch" - "brcm,bcm6368-switch" and the mandatory "brcm,bcm63xx-switch" - -Required properties for BCM585xx/586xx/88312 SoCs: - - - reg: a total of 3 register base addresses, the first one must be the - Switch Register Access block base, the second is the port 5/4 mux - configuration register and the third one is the SGMII configuration - and status register base address. - - - interrupts: a total of 13 interrupts must be specified, in the following - order: port 0-5, 7-8 link status change, then the integrated PHY interrupt, - then the timestamping interrupt and the sleep timer interrupts for ports - 5,7,8. - -Optional properties for BCM585xx/586xx/88312 SoCs: - - - reg-names: a total of 3 names matching the 3 base register address, must - be in the following order: - "srab" - "mux_config" - "sgmii_config" - - - interrupt-names: a total of 13 names matching the 13 interrupts specified - must be in the following order: - "link_state_p0" - "link_state_p1" - "link_state_p2" - "link_state_p3" - "link_state_p4" - "link_state_p5" - "link_state_p7" - "link_state_p8" - "phy" - "ts" - "imp_sleep_timer_p5" - "imp_sleep_timer_p7" - "imp_sleep_timer_p8" - -See Documentation/devicetree/bindings/net/dsa/dsa.txt for a list of additional -required and optional properties. - -Examples: - -Ethernet switch connected via MDIO to the host, CPU port wired to eth0: - - eth0: ethernet@10001000 { - compatible = "brcm,unimac"; - reg = <0x10001000 0x1000>; - - fixed-link { - speed = <1000>; - full-duplex; - }; - }; - - mdio0: mdio@10000000 { - compatible = "brcm,unimac-mdio"; - #address-cells = <1>; - #size-cells = <0>; - - switch0: ethernet-switch@1e { - compatible = "brcm,bcm53125"; - reg = <30>; - #address-cells = <1>; - #size-cells = <0>; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - port0@0 { - reg = <0>; - label = "lan1"; - }; - - port1@1 { - reg = <1>; - label = "lan2"; - }; - - port5@5 { - reg = <5>; - label = "cable-modem"; - fixed-link { - speed = <1000>; - full-duplex; - }; - phy-mode = "rgmii-txid"; - }; - - port8@8 { - reg = <8>; - label = "cpu"; - fixed-link { - speed = <1000>; - full-duplex; - }; - phy-mode = "rgmii-txid"; - ethernet = <ð0>; - }; - }; - }; - }; diff --git a/Documentation/devicetree/bindings/net/dsa/brcm,b53.yaml b/Documentation/devicetree/bindings/net/dsa/brcm,b53.yaml new file mode 100644 index 000000000000..c3c938893ad9 --- /dev/null +++ b/Documentation/devicetree/bindings/net/dsa/brcm,b53.yaml @@ -0,0 +1,249 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/net/dsa/brcm,b53.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Broadcom BCM53xx Ethernet switches + +allOf: + - $ref: dsa.yaml# + +maintainers: + - Florian Fainelli + +description: + Broadcom BCM53xx Ethernet switches + +properties: + compatible: + oneOf: + - const: brcm,bcm5325 + - const: brcm,bcm53115 + - const: brcm,bcm53125 + - const: brcm,bcm53128 + - const: brcm,bcm5365 + - const: brcm,bcm5395 + - const: brcm,bcm5389 + - const: brcm,bcm5397 + - const: brcm,bcm5398 + - items: + - const: brcm,bcm11360-srab + - const: brcm,cygnus-srab + - items: + - enum: + - brcm,bcm53010-srab + - brcm,bcm53011-srab + - brcm,bcm53012-srab + - brcm,bcm53018-srab + - brcm,bcm53019-srab + - const: brcm,bcm5301x-srab + - items: + - enum: + - brcm,bcm11404-srab + - brcm,bcm11407-srab + - brcm,bcm11409-srab + - brcm,bcm58310-srab + - brcm,bcm58311-srab + - brcm,bcm58313-srab + - const: brcm,omega-srab + - items: + - enum: + - brcm,bcm58522-srab + - brcm,bcm58523-srab + - brcm,bcm58525-srab + - brcm,bcm58622-srab + - brcm,bcm58623-srab + - brcm,bcm58625-srab + - brcm,bcm88312-srab + - const: brcm,nsp-srab + - items: + - enum: + - brcm,bcm3384-switch + - brcm,bcm6328-switch + - brcm,bcm6368-switch + - const: brcm,bcm63xx-switch + +required: + - compatible + - reg + +# BCM585xx/586xx/88312 SoCs +if: + properties: + compatible: + contains: + enum: + - brcm,bcm58522-srab + - brcm,bcm58523-srab + - brcm,bcm58525-srab + - brcm,bcm58622-srab + - brcm,bcm58623-srab + - brcm,bcm58625-srab + - brcm,bcm88312-srab +then: + properties: + reg: + minItems: 3 + maxItems: 3 + reg-names: + items: + - const: srab + - const: mux_config + - const: sgmii_config + interrupts: + minItems: 13 + maxItems: 13 + interrupt-names: + items: + - const: link_state_p0 + - const: link_state_p1 + - const: link_state_p2 + - const: link_state_p3 + - const: link_state_p4 + - const: link_state_p5 + - const: link_state_p7 + - const: link_state_p8 + - const: phy + - const: ts + - const: imp_sleep_timer_p5 + - const: imp_sleep_timer_p7 + - const: imp_sleep_timer_p8 + required: + - interrupts +else: + properties: + reg: + maxItems: 1 + +unevaluatedProperties: false + +examples: + - | + mdio { + #address-cells = <1>; + #size-cells = <0>; + + ethernet-switch@1e { + compatible = "brcm,bcm53125"; + reg = <30>; + + ethernet-ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + label = "lan1"; + }; + + port@1 { + reg = <1>; + label = "lan2"; + }; + + port@5 { + reg = <5>; + label = "cable-modem"; + phy-mode = "rgmii-txid"; + fixed-link { + speed = <1000>; + full-duplex; + }; + }; + + port@8 { + reg = <8>; + label = "cpu"; + phy-mode = "rgmii-txid"; + ethernet = <ð0>; + fixed-link { + speed = <1000>; + full-duplex; + }; + }; + }; + }; + }; + - | + #include + #include + + axi { + #address-cells = <1>; + #size-cells = <1>; + + switch@36000 { + compatible = "brcm,bcm58623-srab", "brcm,nsp-srab"; + reg = <0x36000 0x1000>, + <0x3f308 0x8>, + <0x3f410 0xc>; + reg-names = "srab", "mux_config", "sgmii_config"; + interrupts = , + , + , + , + , + , + , + , + , + , + , + , + ; + interrupt-names = "link_state_p0", + "link_state_p1", + "link_state_p2", + "link_state_p3", + "link_state_p4", + "link_state_p5", + "link_state_p7", + "link_state_p8", + "phy", + "ts", + "imp_sleep_timer_p5", + "imp_sleep_timer_p7", + "imp_sleep_timer_p8"; + + ethernet-ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + label = "port0"; + reg = <0>; + }; + + port@1 { + label = "port1"; + reg = <1>; + }; + + port@2 { + label = "port2"; + reg = <2>; + }; + + port@3 { + label = "port3"; + reg = <3>; + }; + + port@4 { + label = "port4"; + reg = <4>; + }; + + port@8 { + ethernet = <&amac2>; + label = "cpu"; + reg = <8>; + fixed-link { + speed = <1000>; + full-duplex; + }; + }; + }; + }; + }; diff --git a/MAINTAINERS b/MAINTAINERS index e73636b75f29..3786322d0bfb 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -3380,7 +3380,7 @@ M: Florian Fainelli L: netdev@vger.kernel.org L: openwrt-devel@lists.openwrt.org (subscribers-only) S: Supported -F: Documentation/devicetree/bindings/net/dsa/b53.txt +F: Documentation/devicetree/bindings/net/dsa/brcm,b53.yaml F: drivers/net/dsa/b53/* F: include/linux/platform_data/b53.h