From patchwork Wed Oct 14 10:13:43 2020 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Serge Semin X-Patchwork-Id: 1382006 Return-Path: X-Original-To: incoming-dt@patchwork.ozlabs.org Delivered-To: patchwork-incoming-dt@bilbo.ozlabs.org Authentication-Results: ozlabs.org; spf=pass (sender SPF authorized) smtp.mailfrom=vger.kernel.org (client-ip=23.128.96.18; helo=vger.kernel.org; envelope-from=devicetree-owner@vger.kernel.org; receiver=) Authentication-Results: ozlabs.org; dmarc=none (p=none dis=none) header.from=baikalelectronics.ru Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by ozlabs.org (Postfix) with ESMTP id 4CB7Z82CXQz9sVH for ; Wed, 14 Oct 2020 21:14:40 +1100 (AEDT) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1729994AbgJNKOR (ORCPT ); Wed, 14 Oct 2020 06:14:17 -0400 Received: from mail.baikalelectronics.com ([87.245.175.226]:45760 "EHLO mail.baikalelectronics.ru" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1729452AbgJNKOM (ORCPT ); Wed, 14 Oct 2020 06:14:12 -0400 Received: from localhost (unknown [127.0.0.1]) by mail.baikalelectronics.ru (Postfix) with ESMTP id 797A6803202B; Wed, 14 Oct 2020 10:14:07 +0000 (UTC) X-Virus-Scanned: amavisd-new at baikalelectronics.ru Received: from mail.baikalelectronics.ru ([127.0.0.1]) by localhost (mail.baikalelectronics.ru [127.0.0.1]) (amavisd-new, port 10024) with ESMTP id wEC0Wp42eOrV; Wed, 14 Oct 2020 13:14:06 +0300 (MSK) From: Serge Semin To: Mathias Nyman , Felipe Balbi , Greg Kroah-Hartman , Rob Herring CC: Serge Semin , Serge Semin , Alexey Malahov , Pavel Parkhomenko , Andy Gross , Bjorn Andersson , Manu Gautam , Roger Quadros , Lad Prabhakar , Yoshihiro Shimoda , Neil Armstrong , Kevin Hilman , , , , , , , Subject: [PATCH 01/20] dt-bindings: usb: usb-hcd: Convert generic USB properties to DT schema Date: Wed, 14 Oct 2020 13:13:43 +0300 Message-ID: <20201014101402.18271-2-Sergey.Semin@baikalelectronics.ru> In-Reply-To: <20201014101402.18271-1-Sergey.Semin@baikalelectronics.ru> References: <20201014101402.18271-1-Sergey.Semin@baikalelectronics.ru> MIME-Version: 1.0 X-ClientProxiedBy: MAIL.baikal.int (192.168.51.25) To mail (192.168.51.25) Precedence: bulk List-ID: X-Mailing-List: devicetree@vger.kernel.org The generic USB HCD properties have been described in the legacy bindings text file: Documentation/devicetree/bindings/usb/generic.txt . Let's convert it' content into the USB HCD DT schema properties so all USB DT nodes would be validated to have them properly utilized. Signed-off-by: Serge Semin Reviewed-by: Rob Herring --- Changelog v2: - Discard '|' in all the new properties, since we don't need to preserve the text formatting. - Convert abbreviated form of the "maximum-speed" enum restriction into the multi-lined version of the list. - Drop quotes from around the string constants. --- .../devicetree/bindings/usb/generic.txt | 57 ------------ .../devicetree/bindings/usb/usb-hcd.yaml | 88 +++++++++++++++++++ 2 files changed, 88 insertions(+), 57 deletions(-) delete mode 100644 Documentation/devicetree/bindings/usb/generic.txt diff --git a/Documentation/devicetree/bindings/usb/generic.txt b/Documentation/devicetree/bindings/usb/generic.txt deleted file mode 100644 index ba472e7aefc9..000000000000 --- a/Documentation/devicetree/bindings/usb/generic.txt +++ /dev/null @@ -1,57 +0,0 @@ -Generic USB Properties - -Optional properties: - - maximum-speed: tells USB controllers we want to work up to a certain - speed. Valid arguments are "super-speed-plus", - "super-speed", "high-speed", "full-speed" and - "low-speed". In case this isn't passed via DT, USB - controllers should default to their maximum HW - capability. - - dr_mode: tells Dual-Role USB controllers that we want to work on a - particular mode. Valid arguments are "host", - "peripheral" and "otg". In case this attribute isn't - passed via DT, USB DRD controllers should default to - OTG. - - phy_type: tells USB controllers that we want to configure the core to support - a UTMI+ PHY with an 8- or 16-bit interface if UTMI+ is - selected. Valid arguments are "utmi" and "utmi_wide". - In case this isn't passed via DT, USB controllers should - default to HW capability. - - otg-rev: tells usb driver the release number of the OTG and EH supplement - with which the device and its descriptors are compliant, - in binary-coded decimal (i.e. 2.0 is 0200H). This - property is used if any real OTG features(HNP/SRP/ADP) - is enabled, if ADP is required, otg-rev should be - 0x0200 or above. - - companion: phandle of a companion - - hnp-disable: tells OTG controllers we want to disable OTG HNP, normally HNP - is the basic function of real OTG except you want it - to be a srp-capable only B device. - - srp-disable: tells OTG controllers we want to disable OTG SRP, SRP is - optional for OTG device. - - adp-disable: tells OTG controllers we want to disable OTG ADP, ADP is - optional for OTG device. - - usb-role-switch: boolean, indicates that the device is capable of assigning - the USB data role (USB host or USB device) for a given - USB connector, such as Type-C, Type-B(micro). - see connector/usb-connector.yaml. - - role-switch-default-mode: indicating if usb-role-switch is enabled, the - device default operation mode of controller while usb - role is USB_ROLE_NONE. Valid arguments are "host" and - "peripheral". Defaults to "peripheral" if not - specified. - - -This is an attribute to a USB controller such as: - -dwc3@4a030000 { - compatible = "synopsys,dwc3"; - reg = <0x4a030000 0xcfff>; - interrupts = <0 92 4> - usb-phy = <&usb2_phy>, <&usb3,phy>; - maximum-speed = "super-speed"; - dr_mode = "otg"; - phy_type = "utmi_wide"; - otg-rev = <0x0200>; - adp-disable; -}; diff --git a/Documentation/devicetree/bindings/usb/usb-hcd.yaml b/Documentation/devicetree/bindings/usb/usb-hcd.yaml index 7263b7f2b510..ee7ea205c71d 100644 --- a/Documentation/devicetree/bindings/usb/usb-hcd.yaml +++ b/Documentation/devicetree/bindings/usb/usb-hcd.yaml @@ -22,9 +22,97 @@ properties: description: Name specifier for the USB PHY + maximum-speed: + description: + Tells USB controllers we want to work up to a certain speed. In case this + isn't passed via DT, USB controllers should default to their maximum HW + capability. + $ref: /schemas/types.yaml#/definitions/string + enum: + - low-speed + - full-speed + - high-speed + - super-speed + - super-speed-plus + + dr_mode: + description: + Tells Dual-Role USB controllers that we want to work on a particular + mode. In case this attribute isn't passed via DT, USB DRD controllers + should default to OTG. + $ref: /schemas/types.yaml#/definitions/string + enum: [host, peripheral, otg] + + phy_type: + description: + Tells USB controllers that we want to configure the core to support a + UTMI+ PHY with an 8- or 16-bit interface if UTMI+ is selected. In case + this isn't passed via DT, USB controllers should default to HW + capability. + $ref: /schemas/types.yaml#/definitions/string + enum: [utmi, utmi_wide] + + otg-rev: + description: + Tells usb driver the release number of the OTG and EH supplement with + which the device and its descriptors are compliant, in binary-coded + decimal (i.e. 2.0 is 0200H). This property is used if any real OTG + features (HNP/SRP/ADP) is enabled. If ADP is required, otg-rev should be + 0x0200 or above. + $ref: /schemas/types.yaml#/definitions/uint32 + + companion: + description: Phandle of a companion device + $ref: /schemas/types.yaml#/definitions/phandle + + hnp-disable: + description: + Tells OTG controllers we want to disable OTG HNP. Normally HNP is the + basic function of real OTG except you want it to be a srp-capable only B + device. + type: boolean + + srp-disable: + description: + Tells OTG controllers we want to disable OTG SRP. SRP is optional for OTG + device. + type: boolean + + adp-disable: + description: + Tells OTG controllers we want to disable OTG ADP. ADP is optional for OTG + device. + type: boolean + + usb-role-switch: + description: + Indicates that the device is capable of assigning the USB data role + (USB host or USB device) for a given USB connector, such as Type-C, + Type-B(micro). See connector/usb-connector.yaml. + + role-switch-default-mode: + description: + Indicates if usb-role-switch is enabled, the device default operation + mode of controller while usb role is USB_ROLE_NONE. + $ref: /schemas/types.yaml#/definitions/string + enum: [host, peripheral] + default: peripheral + examples: - | usb { phys = <&usb2_phy1>, <&usb3_phy1>; phy-names = "usb"; }; + - | + usb@4a030000 { + compatible = "snps,dwc3"; + reg = <0x4a030000 0xcfff>; + interrupts = <0 92 4>; + usb-phy = <&usb2_phy>, <&usb3_phy>; + maximum-speed = "super-speed"; + dr_mode = "otg"; + phy_type = "utmi_wide"; + otg-rev = <0x0200>; + adp-disable; + };