| Message ID | 20200923132600.10652-1-dmurphy@ti.com |
|---|---|
| State | Not Applicable, archived |
| Headers | show |
| Series | [1/6] dt-bindings: tas2770: Add shutdown gpio property | expand |
| Context | Check | Description |
|---|---|---|
| robh/checkpatch | success | |
| robh/dt-meta-schema | success |
On Wed, 23 Sep 2020 08:25:55 -0500, Dan Murphy wrote: > Add the shutdown-gpios property to the yaml to define the GPIO that can > be used to place the device in shutdown mode or wake the device up. Applied to https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound.git for-next Thanks! [1/5] dt-bindings: tas2770: Add shutdown gpio property commit: 29d7b36ce98eb1bfba2c5c9b2ea0d58ff778a2d4 [2/5] ASoC: tas2770: Add shutdown capability via a GPIO commit: 5d0b9dfe0de26b8c4242145cbf7de3a5a2e98293 [3/5] ASoC: tas2770: Set regcache when shutting down and waking device commit: c0a30e2e07e35f219666788c8549156eb8d74105 [4/5] ASoC: tas2770: Remove ti,asi-format code commit: dd7d9052064b4bda94a89dbc1618927319602366 [5/5] ASoC: tas2770: Remove unused variables commit: 3121420cf9b4db7f2bafcdc0e562f60779bf365d All being well this means that it will be integrated into the linux-next tree (usually sometime in the next 24 hours) and sent to Linus during the next merge window (or sooner if it is a bug fix), however if problems are discovered then the patch may be dropped or reverted. You may get further e-mails resulting from automated or manual testing and review of the tree, please engage with people reporting problems and send followup patches addressing any issues that are reported if needed. If any updates are required or you are submitting further changes they should be sent as incremental updates against current git, existing patches will not be replaced. Please add any relevant lists and maintainers to the CCs when replying to this mail. Thanks, Mark
diff --git a/Documentation/devicetree/bindings/sound/tas2770.yaml b/Documentation/devicetree/bindings/sound/tas2770.yaml index bb26d081c9fa..9fdf614add55 100644 --- a/Documentation/devicetree/bindings/sound/tas2770.yaml +++ b/Documentation/devicetree/bindings/sound/tas2770.yaml @@ -29,6 +29,9 @@ properties: reset-gpio: description: GPIO used to reset the device. + shutdown-gpios: + description: GPIO used to control the state of the device. + interrupts: maxItems: 1 @@ -69,6 +72,7 @@ examples: interrupt-parent = <&gpio1>; interrupts = <14>; reset-gpio = <&gpio1 15 0>; + shutdown-gpios = <&gpio1 14 0>; ti,imon-slot-no = <0>; ti,vmon-slot-no = <2>; };
Add the shutdown-gpios property to the yaml to define the GPIO that can be used to place the device in shutdown mode or wake the device up. Signed-off-by: Dan Murphy <dmurphy@ti.com> --- Documentation/devicetree/bindings/sound/tas2770.yaml | 4 ++++ 1 file changed, 4 insertions(+)