Message ID | 20200810084725.16112-1-u.kleine-koenig@pengutronix.de |
---|---|
State | Not Applicable, archived |
Headers | show |
Series | ARM: dts: imx25-pinfunc: Fix gpio function name for pads GPIO_[A-F] | expand |
Context | Check | Description |
---|---|---|
robh/checkpatch | warning | total: 6 errors, 0 warnings, 39 lines checked |
On Mon, Aug 10, 2020 at 10:47:25AM +0200, Uwe Kleine-König wrote: > The pinfunc definitions used GPIO_A as function instead of GPIO_1_0 as Is this how i.MX25 RM names the function? Shawn > done for all the other pins with GPIO functionality. Fix for consistency. > > There are no mainline users that needs adaption. > > Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> > --- > arch/arm/boot/dts/imx25-pinfunc.h | 12 ++++++------ > 1 file changed, 6 insertions(+), 6 deletions(-) > > diff --git a/arch/arm/boot/dts/imx25-pinfunc.h b/arch/arm/boot/dts/imx25-pinfunc.h > index e14140e62b9b..55948e668410 100644 > --- a/arch/arm/boot/dts/imx25-pinfunc.h > +++ b/arch/arm/boot/dts/imx25-pinfunc.h > @@ -563,15 +563,15 @@ > #define MX25_PAD_DE_B__DE_B 0x1f0 0x3ec 0x000 0x00 0x000 > #define MX25_PAD_DE_B__GPIO_2_20 0x1f0 0x3ec 0x000 0x05 0x000 > > -#define MX25_PAD_GPIO_A__GPIO_A 0x1f4 0x3f0 0x000 0x00 0x000 > +#define MX25_PAD_GPIO_A__GPIO_1_0 0x1f4 0x3f0 0x000 0x00 0x000 > #define MX25_PAD_GPIO_A__CAN1_TX 0x1f4 0x3f0 0x000 0x06 0x000 > #define MX25_PAD_GPIO_A__USBOTG_PWR 0x1f4 0x3f0 0x000 0x02 0x000 > > -#define MX25_PAD_GPIO_B__GPIO_B 0x1f8 0x3f4 0x000 0x00 0x000 > +#define MX25_PAD_GPIO_B__GPIO_1_1 0x1f8 0x3f4 0x000 0x00 0x000 > #define MX25_PAD_GPIO_B__USBOTG_OC 0x1f8 0x3f4 0x57c 0x02 0x001 > #define MX25_PAD_GPIO_B__CAN1_RX 0x1f8 0x3f4 0x480 0x06 0x001 > > -#define MX25_PAD_GPIO_C__GPIO_C 0x1fc 0x3f8 0x000 0x00 0x000 > +#define MX25_PAD_GPIO_C__GPIO_1_2 0x1fc 0x3f8 0x000 0x00 0x000 > #define MX25_PAD_GPIO_C__PWM4_PWMO 0x1fc 0x3f8 0x000 0x01 0x000 > #define MX25_PAD_GPIO_C__I2C2_SCL 0x1fc 0x3f8 0x51c 0x02 0x001 > #define MX25_PAD_GPIO_C__KPP_COL4 0x1fc 0x3f8 0x52c 0x03 0x001 > @@ -579,18 +579,18 @@ > #define MX25_PAD_GPIO_C__CAN2_TX 0x1fc 0x3f8 0x000 0x06 0x000 > #define MX25_PAD_GPIO_C__CSPI2_SS2 0x1fc 0x3f8 0x000 0x07 0x000 > > -#define MX25_PAD_GPIO_D__GPIO_D 0x200 0x3fc 0x000 0x00 0x000 > +#define MX25_PAD_GPIO_D__GPIO_1_3 0x200 0x3fc 0x000 0x00 0x000 > #define MX25_PAD_GPIO_D__I2C2_SDA 0x200 0x3fc 0x520 0x02 0x001 > #define MX25_PAD_GPIO_D__CAN2_RX 0x200 0x3fc 0x484 0x06 0x001 > #define MX25_PAD_GPIO_D__CSPI3_SS2 0x200 0x3fc 0x4c4 0x07 0x001 > > -#define MX25_PAD_GPIO_E__GPIO_E 0x204 0x400 0x000 0x00 0x000 > +#define MX25_PAD_GPIO_E__GPIO_1_4 0x204 0x400 0x000 0x00 0x000 > #define MX25_PAD_GPIO_E__I2C3_CLK 0x204 0x400 0x524 0x01 0x002 > #define MX25_PAD_GPIO_E__LD16 0x204 0x400 0x000 0x02 0x000 > #define MX25_PAD_GPIO_E__AUD7_TXD 0x204 0x400 0x000 0x04 0x000 > #define MX25_PAD_GPIO_E__UART4_RXD 0x204 0x400 0x570 0x06 0x002 > > -#define MX25_PAD_GPIO_F__GPIO_F 0x208 0x404 0x000 0x00 0x000 > +#define MX25_PAD_GPIO_F__GPIO_1_5 0x208 0x404 0x000 0x00 0x000 > #define MX25_PAD_GPIO_F__LD17 0x208 0x404 0x000 0x02 0x000 > #define MX25_PAD_GPIO_F__AUD7_TXC 0x208 0x404 0x000 0x04 0x000 > #define MX25_PAD_GPIO_F__UART4_TXD 0x208 0x404 0x000 0x06 0x000 > -- > 2.27.0 >
Hello Shawn, digging through my mailbox of unarchived mails I found this patch. On Sat, Aug 22, 2020 at 08:56:12PM +0800, Shawn Guo wrote: > On Mon, Aug 10, 2020 at 10:47:25AM +0200, Uwe Kleine-König wrote: > > The pinfunc definitions used GPIO_A as function instead of GPIO_1_0 as > > Is this how i.MX25 RM names the function? The reference manual (Rev. 2; 01/2011) doesn't give a name. The relevant description for the GPIO_A pad reads: MUX Mode Select Field. Select 1 of 7 iomux modes to be used for pad: GPIO_A. 000: Select mux mode: ALT0 mux port: GPIO[0] of instance: gpio1. ... So I'd say: GPIO_A is the pad name (only) and the function is better named GPIO_1_0. Best regards Uwe > > done for all the other pins with GPIO functionality. Fix for consistency. > > > > There are no mainline users that needs adaption. > > > > Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> > > --- > > arch/arm/boot/dts/imx25-pinfunc.h | 12 ++++++------ > > 1 file changed, 6 insertions(+), 6 deletions(-) > > > > diff --git a/arch/arm/boot/dts/imx25-pinfunc.h b/arch/arm/boot/dts/imx25-pinfunc.h > > index e14140e62b9b..55948e668410 100644 > > --- a/arch/arm/boot/dts/imx25-pinfunc.h > > +++ b/arch/arm/boot/dts/imx25-pinfunc.h > > @@ -563,15 +563,15 @@ > > #define MX25_PAD_DE_B__DE_B 0x1f0 0x3ec 0x000 0x00 0x000 > > #define MX25_PAD_DE_B__GPIO_2_20 0x1f0 0x3ec 0x000 0x05 0x000 > > > > -#define MX25_PAD_GPIO_A__GPIO_A 0x1f4 0x3f0 0x000 0x00 0x000 > > +#define MX25_PAD_GPIO_A__GPIO_1_0 0x1f4 0x3f0 0x000 0x00 0x000 > > #define MX25_PAD_GPIO_A__CAN1_TX 0x1f4 0x3f0 0x000 0x06 0x000 > > #define MX25_PAD_GPIO_A__USBOTG_PWR 0x1f4 0x3f0 0x000 0x02 0x000 > > [...]
On Mon, Aug 10, 2020 at 10:47:25AM +0200, Uwe Kleine-König wrote: > The pinfunc definitions used GPIO_A as function instead of GPIO_1_0 as > done for all the other pins with GPIO functionality. Fix for consistency. > > There are no mainline users that needs adaption. > > Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Applied, thanks.
diff --git a/arch/arm/boot/dts/imx25-pinfunc.h b/arch/arm/boot/dts/imx25-pinfunc.h index e14140e62b9b..55948e668410 100644 --- a/arch/arm/boot/dts/imx25-pinfunc.h +++ b/arch/arm/boot/dts/imx25-pinfunc.h @@ -563,15 +563,15 @@ #define MX25_PAD_DE_B__DE_B 0x1f0 0x3ec 0x000 0x00 0x000 #define MX25_PAD_DE_B__GPIO_2_20 0x1f0 0x3ec 0x000 0x05 0x000 -#define MX25_PAD_GPIO_A__GPIO_A 0x1f4 0x3f0 0x000 0x00 0x000 +#define MX25_PAD_GPIO_A__GPIO_1_0 0x1f4 0x3f0 0x000 0x00 0x000 #define MX25_PAD_GPIO_A__CAN1_TX 0x1f4 0x3f0 0x000 0x06 0x000 #define MX25_PAD_GPIO_A__USBOTG_PWR 0x1f4 0x3f0 0x000 0x02 0x000 -#define MX25_PAD_GPIO_B__GPIO_B 0x1f8 0x3f4 0x000 0x00 0x000 +#define MX25_PAD_GPIO_B__GPIO_1_1 0x1f8 0x3f4 0x000 0x00 0x000 #define MX25_PAD_GPIO_B__USBOTG_OC 0x1f8 0x3f4 0x57c 0x02 0x001 #define MX25_PAD_GPIO_B__CAN1_RX 0x1f8 0x3f4 0x480 0x06 0x001 -#define MX25_PAD_GPIO_C__GPIO_C 0x1fc 0x3f8 0x000 0x00 0x000 +#define MX25_PAD_GPIO_C__GPIO_1_2 0x1fc 0x3f8 0x000 0x00 0x000 #define MX25_PAD_GPIO_C__PWM4_PWMO 0x1fc 0x3f8 0x000 0x01 0x000 #define MX25_PAD_GPIO_C__I2C2_SCL 0x1fc 0x3f8 0x51c 0x02 0x001 #define MX25_PAD_GPIO_C__KPP_COL4 0x1fc 0x3f8 0x52c 0x03 0x001 @@ -579,18 +579,18 @@ #define MX25_PAD_GPIO_C__CAN2_TX 0x1fc 0x3f8 0x000 0x06 0x000 #define MX25_PAD_GPIO_C__CSPI2_SS2 0x1fc 0x3f8 0x000 0x07 0x000 -#define MX25_PAD_GPIO_D__GPIO_D 0x200 0x3fc 0x000 0x00 0x000 +#define MX25_PAD_GPIO_D__GPIO_1_3 0x200 0x3fc 0x000 0x00 0x000 #define MX25_PAD_GPIO_D__I2C2_SDA 0x200 0x3fc 0x520 0x02 0x001 #define MX25_PAD_GPIO_D__CAN2_RX 0x200 0x3fc 0x484 0x06 0x001 #define MX25_PAD_GPIO_D__CSPI3_SS2 0x200 0x3fc 0x4c4 0x07 0x001 -#define MX25_PAD_GPIO_E__GPIO_E 0x204 0x400 0x000 0x00 0x000 +#define MX25_PAD_GPIO_E__GPIO_1_4 0x204 0x400 0x000 0x00 0x000 #define MX25_PAD_GPIO_E__I2C3_CLK 0x204 0x400 0x524 0x01 0x002 #define MX25_PAD_GPIO_E__LD16 0x204 0x400 0x000 0x02 0x000 #define MX25_PAD_GPIO_E__AUD7_TXD 0x204 0x400 0x000 0x04 0x000 #define MX25_PAD_GPIO_E__UART4_RXD 0x204 0x400 0x570 0x06 0x002 -#define MX25_PAD_GPIO_F__GPIO_F 0x208 0x404 0x000 0x00 0x000 +#define MX25_PAD_GPIO_F__GPIO_1_5 0x208 0x404 0x000 0x00 0x000 #define MX25_PAD_GPIO_F__LD17 0x208 0x404 0x000 0x02 0x000 #define MX25_PAD_GPIO_F__AUD7_TXC 0x208 0x404 0x000 0x04 0x000 #define MX25_PAD_GPIO_F__UART4_TXD 0x208 0x404 0x000 0x06 0x000
The pinfunc definitions used GPIO_A as function instead of GPIO_1_0 as done for all the other pins with GPIO functionality. Fix for consistency. There are no mainline users that needs adaption. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> --- arch/arm/boot/dts/imx25-pinfunc.h | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-)