diff mbox series

[v4,2/6] dt-bindings: usb: Add Qualcomm PMIC type C controller dt-binding

Message ID 20200626185516.18018-3-wcheng@codeaurora.org
State Changes Requested
Headers show
Series Introduce PMIC based USB type C detection | expand

Checks

Context Check Description
robh/checkpatch warning total: 0 errors, 1 warnings, 126 lines checked
robh/dt-meta-schema fail build log

Commit Message

Wesley Cheng June 26, 2020, 6:55 p.m. UTC
Introduce the dt-binding for enabling USB type C orientation and role
detection using the PM8150B.  The driver will be responsible for receiving
the interrupt at a state change on the CC lines, reading the orientation/role,
and communicating this information to the remote clients, which can include
a role switch node and a type C switch.

Signed-off-by: Wesley Cheng <wcheng@codeaurora.org>
---
 .../bindings/usb/qcom,pmic-typec.yaml         | 126 ++++++++++++++++++
 1 file changed, 126 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/usb/qcom,pmic-typec.yaml

Comments

Rob Herring June 29, 2020, 10:07 p.m. UTC | #1
On Fri, 26 Jun 2020 11:55:12 -0700, Wesley Cheng wrote:
> Introduce the dt-binding for enabling USB type C orientation and role
> detection using the PM8150B.  The driver will be responsible for receiving
> the interrupt at a state change on the CC lines, reading the orientation/role,
> and communicating this information to the remote clients, which can include
> a role switch node and a type C switch.
> 
> Signed-off-by: Wesley Cheng <wcheng@codeaurora.org>
> ---
>  .../bindings/usb/qcom,pmic-typec.yaml         | 126 ++++++++++++++++++
>  1 file changed, 126 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/usb/qcom,pmic-typec.yaml
> 


My bot found errors running 'make dt_binding_check' on your patch:

Documentation/devicetree/bindings/usb/qcom,pmic-typec.example.dts:40.54-42.31: Warning (unit_address_vs_reg): /example-0/pm8150b/typec@1500/connector/ports/port@1/endpoint@0: node has a unit name, but no reg or ranges property
Documentation/devicetree/bindings/usb/qcom,pmic-typec.example.dts:43.51-45.31: Warning (unit_address_vs_reg): /example-0/pm8150b/typec@1500/connector/ports/port@1/endpoint@1: node has a unit name, but no reg or ranges property


See https://patchwork.ozlabs.org/patch/1317984

If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure dt-schema is up to date:

pip3 install git+https://github.com/devicetree-org/dt-schema.git@master --upgrade

Please check and re-submit.
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/usb/qcom,pmic-typec.yaml b/Documentation/devicetree/bindings/usb/qcom,pmic-typec.yaml
new file mode 100644
index 000000000000..6714fb2e6b08
--- /dev/null
+++ b/Documentation/devicetree/bindings/usb/qcom,pmic-typec.yaml
@@ -0,0 +1,126 @@ 
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/usb/qcom,pmic-typec.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: Qualcomm PMIC based USB type C Detection Driver
+
+maintainers:
+  - Wesley Cheng <wcheng@codeaurora.org>
+
+description: |
+  Qualcomm PMIC Type C Detect
+
+properties:
+  compatible:
+    enum:
+      - qcom,pm8150b-usb-typec
+
+  reg:
+    maxItems: 1
+    description: Type C base address
+
+  interrupts:
+    maxItems: 1
+    description: CC change interrupt from PMIC
+
+  connector:
+    description: Connector type for remote endpoints
+    type: object
+    $ref: /schemas/connector/usb-connector.yaml#
+
+    properties:
+      compatible:
+        enum:
+          - usb-c-connector
+
+      power-role:
+       enum:
+         - dual
+         - source
+         - sink
+
+      data-role:
+        enum:
+          - dual
+          - host
+          - device
+
+      ports:
+        description: Remote endpoint connections
+        type: object
+
+        properties:
+          port@0:
+            description: Remote endpoints for the High Speed path
+            type: object
+
+          port@1:
+            description: Remote endpoints for the Super Speed path
+            type: object
+
+            properties:
+              endpoint@0:
+                description: Connection to USB type C mux node
+                type: object
+
+                properties:
+                  remote-endpoint:
+                    maxItems: 1
+                    description: Node reference to the type C mux
+
+              endpoint@1:
+                description: Connection to role switch node
+                type: object
+
+                properties:
+                  remote-endpoint:
+                    maxItems: 1
+                    description: Node reference to the role switch node
+
+    required:
+      - compatible
+
+required:
+  - compatible
+  - interrupts
+  - connector
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    pm8150b {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        pm8150b_typec: typec@1500 {
+            compatible = "qcom,pm8150b-usb-typec";
+            reg = <0x1500>;
+            interrupts = <0x2 0x15 0x5 IRQ_TYPE_EDGE_RISING>;
+
+            connector {
+                compatible = "usb-c-connector";
+                power-role = "dual";
+                data-role = "dual";
+                ports {
+                    #address-cells = <1>;
+                    #size-cells = <0>;
+                    port@0 {
+                        reg = <0>;
+                    };
+                    port@1 {
+                        reg = <1>;
+                        usb3_data_ss: endpoint@0 {
+                            remote-endpoint = <&qmp_ss_mux>;
+                        };
+                        usb3_role: endpoint@1 {
+                            remote-endpoint = <&dwc3_drd_switch>;
+                        };
+                    };
+                };
+            };
+        };
+    };
+...