[1/2] dt-bindings: tas2770: Convert tas2770 binding to yaml

Convert the tas2770 binding to yaml format.
Add in the reset-gpio to the binding as it is in the code but not
documented in the binding.

Signed-off-by: Dan Murphy <dmurphy@ti.com>
---
 .../devicetree/bindings/sound/tas2770.txt     | 37 ---------
 .../devicetree/bindings/sound/tas2770.yaml    | 76 +++++++++++++++++++
 2 files changed, 76 insertions(+), 37 deletions(-)
 delete mode 100644 Documentation/devicetree/bindings/sound/tas2770.txt
 create mode 100644 Documentation/devicetree/bindings/sound/tas2770.yaml

On Fri, Jun 12, 2020 at 12:13:41PM -0500, Dan Murphy wrote:
> Convert the tas2770 binding to yaml format.
> Add in the reset-gpio to the binding as it is in the code but not
> documented in the binding.
> 
> Signed-off-by: Dan Murphy <dmurphy@ti.com>
> ---
>  .../devicetree/bindings/sound/tas2770.txt     | 37 ---------
>  .../devicetree/bindings/sound/tas2770.yaml    | 76 +++++++++++++++++++
>  2 files changed, 76 insertions(+), 37 deletions(-)
>  delete mode 100644 Documentation/devicetree/bindings/sound/tas2770.txt
>  create mode 100644 Documentation/devicetree/bindings/sound/tas2770.yaml
> 
> diff --git a/Documentation/devicetree/bindings/sound/tas2770.txt b/Documentation/devicetree/bindings/sound/tas2770.txt
> deleted file mode 100644
> index ede6bb3d9637..000000000000
> --- a/Documentation/devicetree/bindings/sound/tas2770.txt
> +++ /dev/null
> @@ -1,37 +0,0 @@
> -Texas Instruments TAS2770 Smart PA
> -
> -The TAS2770 is a mono, digital input Class-D audio amplifier optimized for
> -efficiently driving high peak power into small loudspeakers.
> -Integrated speaker voltage and current sense provides for
> -real time monitoring of loudspeaker behavior.
> -
> -Required properties:
> -
> - - compatible:	   - Should contain "ti,tas2770".
> - - reg:		       - The i2c address. Should contain <0x4c>, <0x4d>,<0x4e>, or <0x4f>.
> - - #address-cells  - Should be <1>.
> - - #size-cells     - Should be <0>.
> - - ti,asi-format:  - Sets TDM RX capture edge. 0->Rising; 1->Falling.
> - - ti,imon-slot-no:- TDM TX current sense time slot.
> - - ti,vmon-slot-no:- TDM TX voltage sense time slot.
> -
> -Optional properties:
> -
> -- interrupt-parent: the phandle to the interrupt controller which provides
> -                     the interrupt.
> -- interrupts: interrupt specification for data-ready.
> -
> -Examples:
> -
> -    tas2770@4c {
> -                compatible = "ti,tas2770";
> -                reg = <0x4c>;
> -                #address-cells = <1>;
> -                #size-cells = <0>;
> -                interrupt-parent = <&msm_gpio>;
> -                interrupts = <97 0>;
> -                ti,asi-format = <0>;
> -                ti,imon-slot-no = <0>;
> -                ti,vmon-slot-no = <2>;
> -        };
> -
> diff --git a/Documentation/devicetree/bindings/sound/tas2770.yaml b/Documentation/devicetree/bindings/sound/tas2770.yaml
> new file mode 100644
> index 000000000000..8c667fd37a57
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/sound/tas2770.yaml
> @@ -0,0 +1,76 @@
> +# SPDX-License-Identifier: (GPL-2.0+ OR BSD-2-Clause)

Do you have rights to relicense? The old binding defaults to 
GPL-2.0-only. If so, great.

Either way, GPL-2.0-only not GPL-2.0+.

Otherwise,

Reviewed-by: Rob Herring <robh@kernel.org>

> +# Copyright (C) 2019-20 Texas Instruments Incorporated
> +%YAML 1.2
> +---
> +$id: "http://devicetree.org/schemas/sound/tas2770.yaml#"
> +$schema: "http://devicetree.org/meta-schemas/core.yaml#"
> +
> +title: Texas Instruments TAS2770 Smart PA
> +
> +maintainers:
> +  - Shi Fu <shifu0704@thundersoft.com>
> +
> +description: |
> +  The TAS2770 is a mono, digital input Class-D audio amplifier optimized for
> +  efficiently driving high peak power into small loudspeakers.
> +  Integrated speaker voltage and current sense provides for
> +  real time monitoring of loudspeaker behavior.
> +
> +properties:
> +  compatible:
> +    enum:
> +      - ti,tas2770
> +
> +  reg:
> +    maxItems: 1
> +    description: |
> +       I2C address of the device can be one of these 0x4c, 0x4d, 0x4e or 0x4f
> +
> +  reset-gpio:
> +    description: GPIO used to reset the device.
> +
> +  interrupts:
> +    maxItems: 1
> +
> +  ti,imon-slot-no:
> +    $ref: /schemas/types.yaml#/definitions/uint32
> +    description: TDM TX current sense time slot.
> +
> +  ti,vmon-slot-no:
> +    $ref: /schemas/types.yaml#/definitions/uint32
> +    description: TDM TX voltage sense time slot.
> +
> +  ti,asi-format:
> +    $ref: /schemas/types.yaml#/definitions/uint32
> +    description: Sets TDM RX capture edge.
> +    enum:
> +          - 0 # Rising edge
> +          - 1 # Falling edge
> +
> +  '#sound-dai-cells':
> +    const: 1
> +
> +required:
> +  - compatible
> +  - reg
> +
> +additionalProperties: false
> +
> +examples:
> +  - |
> +   #include <dt-bindings/gpio/gpio.h>
> +   i2c0 {
> +     #address-cells = <1>;
> +     #size-cells = <0>;
> +     codec: codec@4c {
> +       compatible = "ti,tas2770";
> +       reg = <0x4c>;
> +       #sound-dai-cells = <1>;
> +       interrupt-parent = <&gpio1>;
> +       interrupts = <14>;
> +       reset-gpio = <&gpio1 15 0>;
> +       ti,imon-slot-no = <0>;
> +       ti,vmon-slot-no = <2>;
> +     };
> +   };
> +
> -- 
> 2.26.2
>

On Fri, 12 Jun 2020 12:13:41 -0500, Dan Murphy wrote:
> Convert the tas2770 binding to yaml format.
> Add in the reset-gpio to the binding as it is in the code but not
> documented in the binding.

Applied to

   https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound.git for-next

Thanks!

[1/2] dt-bindings: tas2770: Convert tas2770 binding to yaml
      (no commit info)
[2/2] ASoC: tas2770: Fix reset gpio property name
      commit: 58b868f51d6e38146e44cb09fcd92b5fc35d83bc

All being well this means that it will be integrated into the linux-next
tree (usually sometime in the next 24 hours) and sent to Linus during
the next merge window (or sooner if it is a bug fix), however if
problems are discovered then the patch may be dropped or reverted.

You may get further e-mails resulting from automated or manual testing
and review of the tree, please engage with people reporting problems and
send followup patches addressing any issues that are reported if needed.

If any updates are required or you are submitting further changes they
should be sent as incremental updates against current git, existing
patches will not be replaced.

Please add any relevant lists and maintainers to the CCs when replying
to this mail.

Thanks,
Mark