diff mbox series

[v8,1/2] dt-bindings: phy: intel-emmc-phy: Add YAML schema for LGM eMMC PHY

Message ID 20191212015320.20969-2-vadivel.muruganx.ramuthevar@linux.intel.com
State Superseded, archived
Headers show
Series phy: intel-lgm-emmc: Add support for eMMC PHY | expand

Checks

Context Check Description
robh/checkpatch warning "total: 0 errors, 1 warnings, 62 lines checked"
robh/dt-meta-schema fail build log

Commit Message

Ramuthevar, Vadivel MuruganX Dec. 12, 2019, 1:53 a.m. UTC
From: Ramuthevar Vadivel Murugan <vadivel.muruganx.ramuthevar@linux.intel.com>

Add a YAML schema to use the host controller driver with the
eMMC PHY on Intel's Lightning Mountain SoC.

Signed-off-by: Ramuthevar Vadivel Murugan <vadivel.muruganx.ramuthevar@linux.intel.com>
---
 .../bindings/phy/intel,lgm-emmc-phy.yaml           | 62 ++++++++++++++++++++++
 1 file changed, 62 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/phy/intel,lgm-emmc-phy.yaml

Comments

Rob Herring Dec. 13, 2019, 7:08 p.m. UTC | #1
On Thu, Dec 12, 2019 at 09:53:19AM +0800, Ramuthevar,Vadivel MuruganX wrote:
> From: Ramuthevar Vadivel Murugan <vadivel.muruganx.ramuthevar@linux.intel.com>
> 
> Add a YAML schema to use the host controller driver with the
> eMMC PHY on Intel's Lightning Mountain SoC.
> 
> Signed-off-by: Ramuthevar Vadivel Murugan <vadivel.muruganx.ramuthevar@linux.intel.com>
> ---
>  .../bindings/phy/intel,lgm-emmc-phy.yaml           | 62 ++++++++++++++++++++++
>  1 file changed, 62 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/phy/intel,lgm-emmc-phy.yaml
> 
> diff --git a/Documentation/devicetree/bindings/phy/intel,lgm-emmc-phy.yaml b/Documentation/devicetree/bindings/phy/intel,lgm-emmc-phy.yaml
> new file mode 100644
> index 000000000000..aed11258d96d
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/phy/intel,lgm-emmc-phy.yaml
> @@ -0,0 +1,62 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/phy/intel,lgm-emmc-phy.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Intel Lightning Mountain(LGM) eMMC PHY Device Tree Bindings
> +
> +maintainers:
> +  - Ramuthevar Vadivel Murugan <vadivel.muruganx.ramuthevar@linux.intel.com>
> +
> +description: |+
> +  Bindings for eMMC PHY on Intel's Lightning Mountain SoC, syscon
> +  node is used to reference the base address of eMMC phy registers.
> +
> +  The eMMC PHY node should be the child of a syscon node with the
> +  required property:
> +
> +  - compatible:         Should be one of the following:
> +                        "intel,lgm-syscon", "syscon"
> +  - reg:
> +      maxItems: 1
> +
> +properties:
> +  compatible:
> +    contains:

You need to drop 'contains'. That implies other strings can also be 
present.

> +      const: intel,lgm-emmc-phy
> +
> +  "#phy-cells":
> +    const: 0
> +
> +  reg:
> +    maxItems: 1
> +
> +  clocks:
> +    maxItems: 1
> +
> +  clock-names:
> +    maxItems: 1

Drop maxItems. It should be:

const: emmcclk

Or just drop clock-names because you don't really need *-names when 
there is only 1.

> +
> +required:
> +  - "#phy-cells"
> +  - compatible
> +  - reg
> +  - clocks
> +  - clock-names
> +
> +examples:
> +  - |
> +    sysconf: chiptop@e0200000 {
> +      compatible = "intel,lgm-syscon", "syscon";
> +      reg = <0xe0200000 0x100>;
> +
> +      emmc-phy: emmc-phy@a8 {
> +        compatible = "intel,lgm-emmc-phy";
> +        reg = <0x00a8 0x10>;
> +        clocks = <&emmc>;
> +        clock-names = "emmcclk";
> +        #phy-cells = <0>;
> +      };
> +    };
> +...
> -- 
> 2.11.0
>
Ramuthevar, Vadivel MuruganX Dec. 16, 2019, 3:23 a.m. UTC | #2
Hi,

    Thank you for the review comments.

On 14/12/2019 3:08 AM, Rob Herring wrote:
> On Thu, Dec 12, 2019 at 09:53:19AM +0800, Ramuthevar,Vadivel MuruganX wrote:
>> From: Ramuthevar Vadivel Murugan <vadivel.muruganx.ramuthevar@linux.intel.com>
>>
>> Add a YAML schema to use the host controller driver with the
>> eMMC PHY on Intel's Lightning Mountain SoC.
>>
>> Signed-off-by: Ramuthevar Vadivel Murugan <vadivel.muruganx.ramuthevar@linux.intel.com>
>> ---
>>   .../bindings/phy/intel,lgm-emmc-phy.yaml           | 62 ++++++++++++++++++++++
>>   1 file changed, 62 insertions(+)
>>   create mode 100644 Documentation/devicetree/bindings/phy/intel,lgm-emmc-phy.yaml
>>
>> diff --git a/Documentation/devicetree/bindings/phy/intel,lgm-emmc-phy.yaml b/Documentation/devicetree/bindings/phy/intel,lgm-emmc-phy.yaml
>> new file mode 100644
>> index 000000000000..aed11258d96d
>> --- /dev/null
>> +++ b/Documentation/devicetree/bindings/phy/intel,lgm-emmc-phy.yaml
>> @@ -0,0 +1,62 @@
>> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
>> +%YAML 1.2
>> +---
>> +$id: http://devicetree.org/schemas/phy/intel,lgm-emmc-phy.yaml#
>> +$schema: http://devicetree.org/meta-schemas/core.yaml#
>> +
>> +title: Intel Lightning Mountain(LGM) eMMC PHY Device Tree Bindings
>> +
>> +maintainers:
>> +  - Ramuthevar Vadivel Murugan <vadivel.muruganx.ramuthevar@linux.intel.com>
>> +
>> +description: |+
>> +  Bindings for eMMC PHY on Intel's Lightning Mountain SoC, syscon
>> +  node is used to reference the base address of eMMC phy registers.
>> +
>> +  The eMMC PHY node should be the child of a syscon node with the
>> +  required property:
>> +
>> +  - compatible:         Should be one of the following:
>> +                        "intel,lgm-syscon", "syscon"
>> +  - reg:
>> +      maxItems: 1
>> +
>> +properties:
>> +  compatible:
>> +    contains:
> You need to drop 'contains'. That implies other strings can also be
> present.
Sure, I will drop contains..
>> +      const: intel,lgm-emmc-phy
>> +
>> +  "#phy-cells":
>> +    const: 0
>> +
>> +  reg:
>> +    maxItems: 1
>> +
>> +  clocks:
>> +    maxItems: 1
>> +
>> +  clock-names:
>> +    maxItems: 1
> Drop maxItems. It should be:
>
> const: emmcclk
>
> Or just drop clock-names because you don't really need *-names when
> there is only 1.

Noted, fix it.

With Best Regards
Vadivel
>> +
>> +required:
>> +  - "#phy-cells"
>> +  - compatible
>> +  - reg
>> +  - clocks
>> +  - clock-names
>> +
>> +examples:
>> +  - |
>> +    sysconf: chiptop@e0200000 {
>> +      compatible = "intel,lgm-syscon", "syscon";
>> +      reg = <0xe0200000 0x100>;
>> +
>> +      emmc-phy: emmc-phy@a8 {
>> +        compatible = "intel,lgm-emmc-phy";
>> +        reg = <0x00a8 0x10>;
>> +        clocks = <&emmc>;
>> +        clock-names = "emmcclk";
>> +        #phy-cells = <0>;
>> +      };
>> +    };
>> +...
>> -- 
>> 2.11.0
>>
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/phy/intel,lgm-emmc-phy.yaml b/Documentation/devicetree/bindings/phy/intel,lgm-emmc-phy.yaml
new file mode 100644
index 000000000000..aed11258d96d
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/intel,lgm-emmc-phy.yaml
@@ -0,0 +1,62 @@ 
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/phy/intel,lgm-emmc-phy.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Intel Lightning Mountain(LGM) eMMC PHY Device Tree Bindings
+
+maintainers:
+  - Ramuthevar Vadivel Murugan <vadivel.muruganx.ramuthevar@linux.intel.com>
+
+description: |+
+  Bindings for eMMC PHY on Intel's Lightning Mountain SoC, syscon
+  node is used to reference the base address of eMMC phy registers.
+
+  The eMMC PHY node should be the child of a syscon node with the
+  required property:
+
+  - compatible:         Should be one of the following:
+                        "intel,lgm-syscon", "syscon"
+  - reg:
+      maxItems: 1
+
+properties:
+  compatible:
+    contains:
+      const: intel,lgm-emmc-phy
+
+  "#phy-cells":
+    const: 0
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    maxItems: 1
+
+required:
+  - "#phy-cells"
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+
+examples:
+  - |
+    sysconf: chiptop@e0200000 {
+      compatible = "intel,lgm-syscon", "syscon";
+      reg = <0xe0200000 0x100>;
+
+      emmc-phy: emmc-phy@a8 {
+        compatible = "intel,lgm-emmc-phy";
+        reg = <0x00a8 0x10>;
+        clocks = <&emmc>;
+        clock-names = "emmcclk";
+        #phy-cells = <0>;
+      };
+    };
+...