| Message ID | 20190924124945.491326-4-nuno.sa@analog.com |
|---|---|
| State | Changes Requested, archived |
| Headers | show |
| Series | LTC2947 support | expand |
| Context | Check | Description |
|---|---|---|
| robh/checkpatch | success | |
| robh/dt-meta-schema | fail | build log |
On Tue, Sep 24, 2019 at 02:49:45PM +0200, Nuno Sá wrote: > Document the LTC2947 device devicetree bindings. > > Signed-off-by: Nuno Sá <nuno.sa@analog.com> > --- > .../bindings/hwmon/adi,ltc2947.yaml | 101 ++++++++++++++++++ > MAINTAINERS | 1 + > 2 files changed, 102 insertions(+) > create mode 100644 Documentation/devicetree/bindings/hwmon/adi,ltc2947.yaml > > diff --git a/Documentation/devicetree/bindings/hwmon/adi,ltc2947.yaml b/Documentation/devicetree/bindings/hwmon/adi,ltc2947.yaml > new file mode 100644 > index 000000000000..2ea0187421d4 > --- /dev/null > +++ b/Documentation/devicetree/bindings/hwmon/adi,ltc2947.yaml > @@ -0,0 +1,101 @@ Missing license. Please make new bindings (GPL-2.0-only OR BSD-2-Clause) > +%YAML 1.2 > +--- > +$id: http://devicetree.org/schemas/bindings/hwmon/adi,ltc2947.yaml# > +$schema: http://devicetree.org/meta-schemas/core.yaml# > + > +title: Analog Devices LTC2947 high precision power and energy monitor > + > +maintainers: > + - Nuno Sá <nuno.sa@analog.com> > + > +description: | > + Analog Devices LTC2947 high precision power and energy monitor over SPI or I2C. > + > + https://www.analog.com/media/en/technical-documentation/data-sheets/LTC2947.pdf > + > +properties: > + compatible: > + enum: > + - adi,ltc2947 > + > + reg: > + maxItems: 1 > + > + clocks: > + description: > + The LTC2947 uses either a trimmed internal oscillator or an external clock > + as the time base for determining the integration period to represent time, > + charge and energy. When an external clock is used, this property must be > + set accordingly. > + maxItems: 1 > + > + adi,accumulator-ctl-pol: > + description: > + This property controls the polarity of current that is accumulated to > + calculate charge and energy so that, they can be only accumulated for > + positive current for example. Since there are two sets of registers for > + the accumulated values, this entry can also have two items which sets > + energy1/charge1 and energy2/charger2 respectively. Check table 12 of the > + datasheet for more information on the supported options. > + allOf: > + - $ref: /schemas/types.yaml#/definitions/uint32-array > + - enum: [0, 1, 2, 3] > + - minItems: 2 > + - maxItems: 2 > + default: [0, 0] This should be: allOf: - $ref: ... items: enum: [0, 1, 2, 3] default: 0 minItems: 2 maxItems: 2 > + > + adi,accumulation-deadband-microamp: > + description: > + This property controls the Accumulation Dead band which allows to set the > + level of current below which no accumulation takes place. > + allOf: > + - $ref: /schemas/types.yaml#/definitions/uint32 > + - maximum: 255 maximum should be at same indent as allOf. Or default should be at the same level as maximum (under a single '-' list entry). > + default: 0 > + > + adi,gpio-out-pol: > + description: > + This property controls the GPIO polarity. Setting it to one makes the GPIO > + active high, setting it to zero makets it active low. When this property > + is present, the GPIO is automatically configured as output and set to > + control a fan as a function of measured temperature. > + allOf: > + - $ref: /schemas/types.yaml#/definitions/uint32 > + - enum: [0, 1] > + default: 0 Same here. > + > + adi,gpio-in-accum: > + description: > + When set, this property sets the GPIO as input. It is then used to control > + the accumulation of charge, energy and time. This function can be > + enabled/configured separately for each of the two sets of accumulation > + registers. Check table 13 of the datasheet for more information on the > + supported options. This property cannot be used together with > + adi,gpio-out-pol. > + allOf: > + - $ref: /schemas/types.yaml#/definitions/uint32-array > + - enum: [0, 1, 2] > + - minItems: 2 > + - maxItems: 2 > + default: [0, 0] Similar here. > + > +required: > + - compatible > + - reg > + > + > +examples: > + - | > + spi0 { Just 'spi' > + #address-cells = <1>; > + #size-cells = <0>; > + > + ltc2947_spi: ltc2947@0 { > + compatible = "adi,ltc2947"; > + reg = <0>; > + /* accumulation takes place always for energ1/charge1. */ > + /* accumulation only on positive current for energy2/charge2. */ > + adi,accumulator-ctl-pol = <0 1>; > + }; > + }; > +... > diff --git a/MAINTAINERS b/MAINTAINERS > index 889f38c1c930..820bdde2044b 100644 > --- a/MAINTAINERS > +++ b/MAINTAINERS > @@ -9505,6 +9505,7 @@ F: drivers/hwmon/ltc2947-core.c > F: drivers/hwmon/ltc2947-spi.c > F: drivers/hwmon/ltc2947-i2c.c > F: drivers/hwmon/ltc2947.h > +F: Documentation/devicetree/bindings/hwmon/adi,ltc2947.yaml > > LTC4306 I2C MULTIPLEXER DRIVER > M: Michael Hennerich <michael.hennerich@analog.com> > -- > 2.23.0 >
On Wed, 2019-10-02 at 09:19 -0500, Rob Herring wrote: > > On Tue, Sep 24, 2019 at 02:49:45PM +0200, Nuno Sá wrote: > > Document the LTC2947 device devicetree bindings. > > > > Signed-off-by: Nuno Sá <nuno.sa@analog.com> > > --- > > .../bindings/hwmon/adi,ltc2947.yaml | 101 > > ++++++++++++++++++ > > MAINTAINERS | 1 + > > 2 files changed, 102 insertions(+) > > create mode 100644 > > Documentation/devicetree/bindings/hwmon/adi,ltc2947.yaml > > > > diff --git > > a/Documentation/devicetree/bindings/hwmon/adi,ltc2947.yaml > > b/Documentation/devicetree/bindings/hwmon/adi,ltc2947.yaml > > new file mode 100644 > > index 000000000000..2ea0187421d4 > > --- /dev/null > > +++ b/Documentation/devicetree/bindings/hwmon/adi,ltc2947.yaml > > @@ -0,0 +1,101 @@ > > Missing license. Please make new bindings (GPL-2.0-only OR BSD-2- > Clause) ack. > > +%YAML 1.2 > > +--- > > +$id: > > http://devicetree.org/schemas/bindings/hwmon/adi,ltc2947.yaml# > > +$schema: http://devicetree.org/meta-schemas/core.yaml# > > + > > +title: Analog Devices LTC2947 high precision power and energy > > monitor > > + > > +maintainers: > > + - Nuno Sá <nuno.sa@analog.com> > > + > > +description: | > > + Analog Devices LTC2947 high precision power and energy monitor > > over SPI or I2C. > > + > > + > > https://www.analog.com/media/en/technical-documentation/data-sheets/LTC2947.pdf > > + > > +properties: > > + compatible: > > + enum: > > + - adi,ltc2947 > > + > > + reg: > > + maxItems: 1 > > + > > + clocks: > > + description: > > + The LTC2947 uses either a trimmed internal oscillator or an > > external clock > > + as the time base for determining the integration period to > > represent time, > > + charge and energy. When an external clock is used, this > > property must be > > + set accordingly. > > + maxItems: 1 > > + > > + adi,accumulator-ctl-pol: > > + description: > > + This property controls the polarity of current that is > > accumulated to > > + calculate charge and energy so that, they can be only > > accumulated for > > + positive current for example. Since there are two sets of > > registers for > > + the accumulated values, this entry can also have two items > > which sets > > + energy1/charge1 and energy2/charger2 respectively. Check > > table 12 of the > > + datasheet for more information on the supported options. > > + allOf: > > + - $ref: /schemas/types.yaml#/definitions/uint32-array > > + - enum: [0, 1, 2, 3] > > + - minItems: 2 > > + - maxItems: 2 > > + default: [0, 0] > > This should be: > > allOf: > - $ref: ... > items: > enum: [0, 1, 2, 3] > default: 0 > minItems: 2 > maxItems: 2 I was expecting this already. When upstreaming another device, I realized some errors with `make dt_binding_check` when evaluating the example. Just for my understanding, is this also incorrect? allOf: - $ref: /schemas/types.yaml#/definitions/uint32-array - minItems: 2 maxItems: 2 items: enum: [0, 1, 2, 3] default: 0 I used a similar pattern in another device that is also waiting for review :). > > + > > + adi,accumulation-deadband-microamp: > > + description: > > + This property controls the Accumulation Dead band which > > allows to set the > > + level of current below which no accumulation takes place. > > + allOf: > > + - $ref: /schemas/types.yaml#/definitions/uint32 > > + - maximum: 255 > > maximum should be at same indent as allOf. Or default should be at > the > same level as maximum (under a single '-' list entry). So it should be? allOf: - $ref: /schemas/types.yaml#/definitions/uint32 - maximum: 255 default: 0 > > + default: 0 > > + > > + adi,gpio-out-pol: > > + description: > > + This property controls the GPIO polarity. Setting it to one > > makes the GPIO > > + active high, setting it to zero makets it active low. When > > this property > > + is present, the GPIO is automatically configured as output > > and set to > > + control a fan as a function of measured temperature. > > + allOf: > > + - $ref: /schemas/types.yaml#/definitions/uint32 > > + - enum: [0, 1] > > + default: 0 > > Same here. > > > + > > + adi,gpio-in-accum: > > + description: > > + When set, this property sets the GPIO as input. It is then > > used to control > > + the accumulation of charge, energy and time. This function > > can be > > + enabled/configured separately for each of the two sets of > > accumulation > > + registers. Check table 13 of the datasheet for more > > information on the > > + supported options. This property cannot be used together > > with > > + adi,gpio-out-pol. > > + allOf: > > + - $ref: /schemas/types.yaml#/definitions/uint32-array > > + - enum: [0, 1, 2] > > + - minItems: 2 > > + - maxItems: 2 > > + default: [0, 0] > > Similar here. > > > + > > +required: > > + - compatible > > + - reg > > + > > + > > +examples: > > + - | > > + spi0 { > > Just 'spi' ack. > > + #address-cells = <1>; > > + #size-cells = <0>; > > + > > + ltc2947_spi: ltc2947@0 { > > + compatible = "adi,ltc2947"; > > + reg = <0>; > > + /* accumulation takes place always for > > energ1/charge1. */ > > + /* accumulation only on positive current for > > energy2/charge2. */ > > + adi,accumulator-ctl-pol = <0 1>; > > + }; > > + }; > > +... > > diff --git a/MAINTAINERS b/MAINTAINERS > > index 889f38c1c930..820bdde2044b 100644 > > --- a/MAINTAINERS > > +++ b/MAINTAINERS > > @@ -9505,6 +9505,7 @@ F: drivers/hwmon/ltc2947-core.c > > F: drivers/hwmon/ltc2947-spi.c > > F: drivers/hwmon/ltc2947-i2c.c > > F: drivers/hwmon/ltc2947.h > > +F: Documentation/devicetree/bindings/hwmon/adi,ltc2947.yaml > > > > LTC4306 I2C MULTIPLEXER DRIVER > > M: Michael Hennerich <michael.hennerich@analog.com> > > -- > > 2.23.0 > >
On Wed, Oct 2, 2019 at 10:09 AM Sa, Nuno <Nuno.Sa@analog.com> wrote: > > On Wed, 2019-10-02 at 09:19 -0500, Rob Herring wrote: > > > > On Tue, Sep 24, 2019 at 02:49:45PM +0200, Nuno Sá wrote: > > > Document the LTC2947 device devicetree bindings. > > > > > > Signed-off-by: Nuno Sá <nuno.sa@analog.com> > > > --- > > > .../bindings/hwmon/adi,ltc2947.yaml | 101 > > > ++++++++++++++++++ > > > MAINTAINERS | 1 + > > > 2 files changed, 102 insertions(+) > > > create mode 100644 > > > Documentation/devicetree/bindings/hwmon/adi,ltc2947.yaml > > > > > > diff --git > > > a/Documentation/devicetree/bindings/hwmon/adi,ltc2947.yaml > > > b/Documentation/devicetree/bindings/hwmon/adi,ltc2947.yaml > > > new file mode 100644 > > > index 000000000000..2ea0187421d4 > > > --- /dev/null > > > +++ b/Documentation/devicetree/bindings/hwmon/adi,ltc2947.yaml > > > @@ -0,0 +1,101 @@ > > > > Missing license. Please make new bindings (GPL-2.0-only OR BSD-2- > > Clause) > > ack. > > > > +%YAML 1.2 > > > +--- > > > +$id: > > > http://devicetree.org/schemas/bindings/hwmon/adi,ltc2947.yaml# > > > +$schema: http://devicetree.org/meta-schemas/core.yaml# > > > + > > > +title: Analog Devices LTC2947 high precision power and energy > > > monitor > > > + > > > +maintainers: > > > + - Nuno Sá <nuno.sa@analog.com> > > > + > > > +description: | > > > + Analog Devices LTC2947 high precision power and energy monitor > > > over SPI or I2C. > > > + > > > + > > > https://www.analog.com/media/en/technical-documentation/data-sheets/LTC2947.pdf > > > + > > > +properties: > > > + compatible: > > > + enum: > > > + - adi,ltc2947 > > > + > > > + reg: > > > + maxItems: 1 > > > + > > > + clocks: > > > + description: > > > + The LTC2947 uses either a trimmed internal oscillator or an > > > external clock > > > + as the time base for determining the integration period to > > > represent time, > > > + charge and energy. When an external clock is used, this > > > property must be > > > + set accordingly. > > > + maxItems: 1 > > > + > > > + adi,accumulator-ctl-pol: > > > + description: > > > + This property controls the polarity of current that is > > > accumulated to > > > + calculate charge and energy so that, they can be only > > > accumulated for > > > + positive current for example. Since there are two sets of > > > registers for > > > + the accumulated values, this entry can also have two items > > > which sets > > > + energy1/charge1 and energy2/charger2 respectively. Check > > > table 12 of the > > > + datasheet for more information on the supported options. > > > + allOf: > > > + - $ref: /schemas/types.yaml#/definitions/uint32-array > > > + - enum: [0, 1, 2, 3] > > > + - minItems: 2 > > > + - maxItems: 2 > > > + default: [0, 0] > > > > This should be: > > > > allOf: > > - $ref: ... > > items: > > enum: [0, 1, 2, 3] > > default: 0 > > minItems: 2 > > maxItems: 2 > > I was expecting this already. When upstreaming another device, I > realized some errors with `make dt_binding_check` when evaluating the > example. Just for my understanding, is this also incorrect? The allOf structure like this also works. You'll get better error messages if schemas are not under an allOf. > allOf: > - $ref: /schemas/types.yaml#/definitions/uint32-array > - minItems: 2 > maxItems: 2 > items: > enum: [0, 1, 2, 3] > default: 0 However, 'default' needs to be indented under 'items'. > > I used a similar pattern in another device that is also waiting for > review :). > > > + > > > + adi,accumulation-deadband-microamp: > > > + description: > > > + This property controls the Accumulation Dead band which > > > allows to set the > > > + level of current below which no accumulation takes place. > > > + allOf: > > > + - $ref: /schemas/types.yaml#/definitions/uint32 > > > + - maximum: 255 > > > > maximum should be at same indent as allOf. Or default should be at > > the > > same level as maximum (under a single '-' list entry). > > So it should be? > > allOf: > - $ref: /schemas/types.yaml#/definitions/uint32 > - maximum: 255 > default: 0 Yes.
Hi Rob, Just wanted to clarify something which I don't know if is something I'm doing wrong or if it is some issue. On Wed, 2019-10-02 at 14:06 -0500, Rob Herring wrote: > > On Wed, Oct 2, 2019 at 10:09 AM Sa, Nuno <Nuno.Sa@analog.com> wrote: > > On Wed, 2019-10-02 at 09:19 -0500, Rob Herring wrote: > > > On Tue, Sep 24, 2019 at 02:49:45PM +0200, Nuno Sá wrote: > > > > Document the LTC2947 device devicetree bindings. > > > > > > > > Signed-off-by: Nuno Sá <nuno.sa@analog.com> > > > > --- > > > > .../bindings/hwmon/adi,ltc2947.yaml | 101 > > > > ++++++++++++++++++ > > > > MAINTAINERS | 1 + > > > > 2 files changed, 102 insertions(+) > > > > create mode 100644 > > > > Documentation/devicetree/bindings/hwmon/adi,ltc2947.yaml > > > > > > > > diff --git > > > > a/Documentation/devicetree/bindings/hwmon/adi,ltc2947.yaml > > > > b/Documentation/devicetree/bindings/hwmon/adi,ltc2947.yaml > > > > new file mode 100644 > > > > index 000000000000..2ea0187421d4 > > > > --- /dev/null > > > > +++ b/Documentation/devicetree/bindings/hwmon/adi,ltc2947.yaml > > > > @@ -0,0 +1,101 @@ > > > > > > Missing license. Please make new bindings (GPL-2.0-only OR BSD-2- > > > Clause) > > > > ack. > > > > > > +%YAML 1.2 > > > > +--- > > > > +$id: > > > > http://devicetree.org/schemas/bindings/hwmon/adi,ltc2947.yaml# > > > > +$schema: http://devicetree.org/meta-schemas/core.yaml# > > > > + > > > > +title: Analog Devices LTC2947 high precision power and energy > > > > monitor > > > > + > > > > +maintainers: > > > > + - Nuno Sá <nuno.sa@analog.com> > > > > + > > > > +description: | > > > > + Analog Devices LTC2947 high precision power and energy > > > > monitor > > > > over SPI or I2C. > > > > + > > > > + > > > > https://www.analog.com/media/en/technical-documentation/data-sheets/LTC2947.pdf > > > > + > > > > +properties: > > > > + compatible: > > > > + enum: > > > > + - adi,ltc2947 > > > > + > > > > + reg: > > > > + maxItems: 1 > > > > + > > > > + clocks: > > > > + description: > > > > + The LTC2947 uses either a trimmed internal oscillator or > > > > an > > > > external clock > > > > + as the time base for determining the integration period > > > > to > > > > represent time, > > > > + charge and energy. When an external clock is used, this > > > > property must be > > > > + set accordingly. > > > > + maxItems: 1 > > > > + > > > > + adi,accumulator-ctl-pol: > > > > + description: > > > > + This property controls the polarity of current that is > > > > accumulated to > > > > + calculate charge and energy so that, they can be only > > > > accumulated for > > > > + positive current for example. Since there are two sets > > > > of > > > > registers for > > > > + the accumulated values, this entry can also have two > > > > items > > > > which sets > > > > + energy1/charge1 and energy2/charger2 respectively. Check > > > > table 12 of the > > > > + datasheet for more information on the supported options. > > > > + allOf: > > > > + - $ref: /schemas/types.yaml#/definitions/uint32-array > > > > + - enum: [0, 1, 2, 3] > > > > + - minItems: 2 > > > > + - maxItems: 2 > > > > + default: [0, 0] > > > > > > This should be: > > > > > > allOf: > > > - $ref: ... > > > items: > > > enum: [0, 1, 2, 3] > > > default: 0 > > > minItems: 2 > > > maxItems: 2 When trying the above I get: "ltc2947@0: adi,accumulator-ctl-pol:0: [0, 1] is not valid under any of the given schemas" > > I was expecting this already. When upstreaming another device, I > > realized some errors with `make dt_binding_check` when evaluating > > the > > example. Just for my understanding, is this also incorrect? > > The allOf structure like this also works. You'll get better error > messages if schemas are not under an allOf. > > > allOf: > > - $ref: /schemas/types.yaml#/definitions/uint32-array > > - minItems: 2 > > maxItems: 2 > > items: > > enum: [0, 1, 2, 3] > > default: 0 > > However, 'default' needs to be indented under 'items'. In this form, I don't get any warning/error when checking the dts example. > > I used a similar pattern in another device that is also waiting for > > review :). > > > > + > > > > + adi,accumulation-deadband-microamp: > > > > + description: > > > > + This property controls the Accumulation Dead band which > > > > allows to set the > > > > + level of current below which no accumulation takes > > > > place. > > > > + allOf: > > > > + - $ref: /schemas/types.yaml#/definitions/uint32 > > > > + - maximum: 255 > > > > > > maximum should be at same indent as allOf. Or default should be > > > at > > > the > > > same level as maximum (under a single '-' list entry). > > > > So it should be? > > > > allOf: > > - $ref: /schemas/types.yaml#/definitions/uint32 > > - maximum: 255 > > default: 0 > > Yes. Regards, Nuno Sá
On Fri, Oct 4, 2019 at 9:59 AM Sa, Nuno <Nuno.Sa@analog.com> wrote: > > Hi Rob, > > Just wanted to clarify something which I don't know if is something I'm > doing wrong or if it is some issue. > > On Wed, 2019-10-02 at 14:06 -0500, Rob Herring wrote: > > > > On Wed, Oct 2, 2019 at 10:09 AM Sa, Nuno <Nuno.Sa@analog.com> wrote: > > > On Wed, 2019-10-02 at 09:19 -0500, Rob Herring wrote: > > > > On Tue, Sep 24, 2019 at 02:49:45PM +0200, Nuno Sá wrote: > > > > > Document the LTC2947 device devicetree bindings. > > > > > > > > > > Signed-off-by: Nuno Sá <nuno.sa@analog.com> > > > > > --- > > > > > .../bindings/hwmon/adi,ltc2947.yaml | 101 > > > > > ++++++++++++++++++ > > > > > MAINTAINERS | 1 + > > > > > 2 files changed, 102 insertions(+) > > > > > create mode 100644 > > > > > Documentation/devicetree/bindings/hwmon/adi,ltc2947.yaml > > > > > > > > > > diff --git > > > > > a/Documentation/devicetree/bindings/hwmon/adi,ltc2947.yaml > > > > > b/Documentation/devicetree/bindings/hwmon/adi,ltc2947.yaml > > > > > new file mode 100644 > > > > > index 000000000000..2ea0187421d4 > > > > > --- /dev/null > > > > > +++ b/Documentation/devicetree/bindings/hwmon/adi,ltc2947.yaml > > > > > @@ -0,0 +1,101 @@ > > > > > > > > Missing license. Please make new bindings (GPL-2.0-only OR BSD-2- > > > > Clause) > > > > > > ack. > > > > > > > > +%YAML 1.2 > > > > > +--- > > > > > +$id: > > > > > http://devicetree.org/schemas/bindings/hwmon/adi,ltc2947.yaml# > > > > > +$schema: http://devicetree.org/meta-schemas/core.yaml# > > > > > + > > > > > +title: Analog Devices LTC2947 high precision power and energy > > > > > monitor > > > > > + > > > > > +maintainers: > > > > > + - Nuno Sá <nuno.sa@analog.com> > > > > > + > > > > > +description: | > > > > > + Analog Devices LTC2947 high precision power and energy > > > > > monitor > > > > > over SPI or I2C. > > > > > + > > > > > + > > > > > https://www.analog.com/media/en/technical-documentation/data-sheets/LTC2947.pdf > > > > > + > > > > > +properties: > > > > > + compatible: > > > > > + enum: > > > > > + - adi,ltc2947 > > > > > + > > > > > + reg: > > > > > + maxItems: 1 > > > > > + > > > > > + clocks: > > > > > + description: > > > > > + The LTC2947 uses either a trimmed internal oscillator or > > > > > an > > > > > external clock > > > > > + as the time base for determining the integration period > > > > > to > > > > > represent time, > > > > > + charge and energy. When an external clock is used, this > > > > > property must be > > > > > + set accordingly. > > > > > + maxItems: 1 > > > > > + > > > > > + adi,accumulator-ctl-pol: > > > > > + description: > > > > > + This property controls the polarity of current that is > > > > > accumulated to > > > > > + calculate charge and energy so that, they can be only > > > > > accumulated for > > > > > + positive current for example. Since there are two sets > > > > > of > > > > > registers for > > > > > + the accumulated values, this entry can also have two > > > > > items > > > > > which sets > > > > > + energy1/charge1 and energy2/charger2 respectively. Check > > > > > table 12 of the > > > > > + datasheet for more information on the supported options. > > > > > + allOf: > > > > > + - $ref: /schemas/types.yaml#/definitions/uint32-array > > > > > + - enum: [0, 1, 2, 3] > > > > > + - minItems: 2 > > > > > + - maxItems: 2 > > > > > + default: [0, 0] > > > > > > > > This should be: > > > > > > > > allOf: > > > > - $ref: ... > > > > items: > > > > enum: [0, 1, 2, 3] > > > > default: 0 > > > > minItems: 2 > > > > maxItems: 2 > > When trying the above I get: > > "ltc2947@0: adi,accumulator-ctl-pol:0: [0, 1] is not valid under any of > the given schemas" Is dtschema up to date with the latest. I think I fixed this case recently, though with the wonderful json-schema errors it is hard to tell. Rob
On Fri, 2019-10-04 at 10:23 -0500, Rob Herring wrote: > > On Fri, Oct 4, 2019 at 9:59 AM Sa, Nuno <Nuno.Sa@analog.com> wrote: > > Hi Rob, > > > > Just wanted to clarify something which I don't know if is something > > I'm > > doing wrong or if it is some issue. > > > > On Wed, 2019-10-02 at 14:06 -0500, Rob Herring wrote: > > > On Wed, Oct 2, 2019 at 10:09 AM Sa, Nuno <Nuno.Sa@analog.com> > > > wrote: > > > > On Wed, 2019-10-02 at 09:19 -0500, Rob Herring wrote: > > > > > On Tue, Sep 24, 2019 at 02:49:45PM +0200, Nuno Sá wrote: > > > > > > Document the LTC2947 device devicetree bindings. > > > > > > > > > > > > Signed-off-by: Nuno Sá <nuno.sa@analog.com> > > > > > > --- > > > > > > .../bindings/hwmon/adi,ltc2947.yaml | 101 > > > > > > ++++++++++++++++++ > > > > > > MAINTAINERS | 1 + > > > > > > 2 files changed, 102 insertions(+) > > > > > > create mode 100644 > > > > > > Documentation/devicetree/bindings/hwmon/adi,ltc2947.yaml > > > > > > > > > > > > diff --git > > > > > > a/Documentation/devicetree/bindings/hwmon/adi,ltc2947.yaml > > > > > > b/Documentation/devicetree/bindings/hwmon/adi,ltc2947.yaml > > > > > > new file mode 100644 > > > > > > index 000000000000..2ea0187421d4 > > > > > > --- /dev/null > > > > > > +++ > > > > > > b/Documentation/devicetree/bindings/hwmon/adi,ltc2947.yaml > > > > > > @@ -0,0 +1,101 @@ > > > > > > > > > > Missing license. Please make new bindings (GPL-2.0-only OR > > > > > BSD-2- > > > > > Clause) > > > > > > > > ack. > > > > > > > > > > +%YAML 1.2 > > > > > > +--- > > > > > > +$id: > > > > > > http://devicetree.org/schemas/bindings/hwmon/adi,ltc2947.yaml# > > > > > > +$schema: http://devicetree.org/meta-schemas/core.yaml# > > > > > > + > > > > > > +title: Analog Devices LTC2947 high precision power and > > > > > > energy > > > > > > monitor > > > > > > + > > > > > > +maintainers: > > > > > > + - Nuno Sá <nuno.sa@analog.com> > > > > > > + > > > > > > +description: | > > > > > > + Analog Devices LTC2947 high precision power and energy > > > > > > monitor > > > > > > over SPI or I2C. > > > > > > + > > > > > > + > > > > > > https://www.analog.com/media/en/technical-documentation/data-sheets/LTC2947.pdf > > > > > > + > > > > > > +properties: > > > > > > + compatible: > > > > > > + enum: > > > > > > + - adi,ltc2947 > > > > > > + > > > > > > + reg: > > > > > > + maxItems: 1 > > > > > > + > > > > > > + clocks: > > > > > > + description: > > > > > > + The LTC2947 uses either a trimmed internal > > > > > > oscillator or > > > > > > an > > > > > > external clock > > > > > > + as the time base for determining the integration > > > > > > period > > > > > > to > > > > > > represent time, > > > > > > + charge and energy. When an external clock is used, > > > > > > this > > > > > > property must be > > > > > > + set accordingly. > > > > > > + maxItems: 1 > > > > > > + > > > > > > + adi,accumulator-ctl-pol: > > > > > > + description: > > > > > > + This property controls the polarity of current that > > > > > > is > > > > > > accumulated to > > > > > > + calculate charge and energy so that, they can be > > > > > > only > > > > > > accumulated for > > > > > > + positive current for example. Since there are two > > > > > > sets > > > > > > of > > > > > > registers for > > > > > > + the accumulated values, this entry can also have two > > > > > > items > > > > > > which sets > > > > > > + energy1/charge1 and energy2/charger2 respectively. > > > > > > Check > > > > > > table 12 of the > > > > > > + datasheet for more information on the supported > > > > > > options. > > > > > > + allOf: > > > > > > + - $ref: /schemas/types.yaml#/definitions/uint32- > > > > > > array > > > > > > + - enum: [0, 1, 2, 3] > > > > > > + - minItems: 2 > > > > > > + - maxItems: 2 > > > > > > + default: [0, 0] > > > > > > > > > > This should be: > > > > > > > > > > allOf: > > > > > - $ref: ... > > > > > items: > > > > > enum: [0, 1, 2, 3] > > > > > default: 0 > > > > > minItems: 2 > > > > > maxItems: 2 > > > > When trying the above I get: > > > > "ltc2947@0: adi,accumulator-ctl-pol:0: [0, 1] is not valid under > > any of > > the given schemas" > > Is dtschema up to date with the latest. I think I fixed this case > recently, though with the wonderful json-schema errors it is hard to > tell. With latest dtschema works. Thanks! Nuno Sa > Rob
diff --git a/Documentation/devicetree/bindings/hwmon/adi,ltc2947.yaml b/Documentation/devicetree/bindings/hwmon/adi,ltc2947.yaml new file mode 100644 index 000000000000..2ea0187421d4 --- /dev/null +++ b/Documentation/devicetree/bindings/hwmon/adi,ltc2947.yaml @@ -0,0 +1,101 @@ +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/bindings/hwmon/adi,ltc2947.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Analog Devices LTC2947 high precision power and energy monitor + +maintainers: + - Nuno Sá <nuno.sa@analog.com> + +description: | + Analog Devices LTC2947 high precision power and energy monitor over SPI or I2C. + + https://www.analog.com/media/en/technical-documentation/data-sheets/LTC2947.pdf + +properties: + compatible: + enum: + - adi,ltc2947 + + reg: + maxItems: 1 + + clocks: + description: + The LTC2947 uses either a trimmed internal oscillator or an external clock + as the time base for determining the integration period to represent time, + charge and energy. When an external clock is used, this property must be + set accordingly. + maxItems: 1 + + adi,accumulator-ctl-pol: + description: + This property controls the polarity of current that is accumulated to + calculate charge and energy so that, they can be only accumulated for + positive current for example. Since there are two sets of registers for + the accumulated values, this entry can also have two items which sets + energy1/charge1 and energy2/charger2 respectively. Check table 12 of the + datasheet for more information on the supported options. + allOf: + - $ref: /schemas/types.yaml#/definitions/uint32-array + - enum: [0, 1, 2, 3] + - minItems: 2 + - maxItems: 2 + default: [0, 0] + + adi,accumulation-deadband-microamp: + description: + This property controls the Accumulation Dead band which allows to set the + level of current below which no accumulation takes place. + allOf: + - $ref: /schemas/types.yaml#/definitions/uint32 + - maximum: 255 + default: 0 + + adi,gpio-out-pol: + description: + This property controls the GPIO polarity. Setting it to one makes the GPIO + active high, setting it to zero makets it active low. When this property + is present, the GPIO is automatically configured as output and set to + control a fan as a function of measured temperature. + allOf: + - $ref: /schemas/types.yaml#/definitions/uint32 + - enum: [0, 1] + default: 0 + + adi,gpio-in-accum: + description: + When set, this property sets the GPIO as input. It is then used to control + the accumulation of charge, energy and time. This function can be + enabled/configured separately for each of the two sets of accumulation + registers. Check table 13 of the datasheet for more information on the + supported options. This property cannot be used together with + adi,gpio-out-pol. + allOf: + - $ref: /schemas/types.yaml#/definitions/uint32-array + - enum: [0, 1, 2] + - minItems: 2 + - maxItems: 2 + default: [0, 0] + +required: + - compatible + - reg + + +examples: + - | + spi0 { + #address-cells = <1>; + #size-cells = <0>; + + ltc2947_spi: ltc2947@0 { + compatible = "adi,ltc2947"; + reg = <0>; + /* accumulation takes place always for energ1/charge1. */ + /* accumulation only on positive current for energy2/charge2. */ + adi,accumulator-ctl-pol = <0 1>; + }; + }; +... diff --git a/MAINTAINERS b/MAINTAINERS index 889f38c1c930..820bdde2044b 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -9505,6 +9505,7 @@ F: drivers/hwmon/ltc2947-core.c F: drivers/hwmon/ltc2947-spi.c F: drivers/hwmon/ltc2947-i2c.c F: drivers/hwmon/ltc2947.h +F: Documentation/devicetree/bindings/hwmon/adi,ltc2947.yaml LTC4306 I2C MULTIPLEXER DRIVER M: Michael Hennerich <michael.hennerich@analog.com>
Document the LTC2947 device devicetree bindings. Signed-off-by: Nuno Sá <nuno.sa@analog.com> --- .../bindings/hwmon/adi,ltc2947.yaml | 101 ++++++++++++++++++ MAINTAINERS | 1 + 2 files changed, 102 insertions(+) create mode 100644 Documentation/devicetree/bindings/hwmon/adi,ltc2947.yaml