diff mbox series

[v2,1/2] dt-bindings: extcon: Add support for fsa9480 switch

Message ID 20190621111352.22976-2-pawel.mikolaj.chmiel@gmail.com
State Not Applicable, archived
Headers show
Series extcon: Add fsa9480 extcon driver | expand

Checks

Context Check Description
robh/checkpatch success

Commit Message

Paweł Chmiel June 21, 2019, 11:13 a.m. UTC 
From: Tomasz Figa <tomasz.figa@gmail.com>

This patch adds documentation for binding of extcont Fairchild
Semiconductor FSA9480 microusb switch.
This usb port accessory detector and switch, can be found for example in
some Samsung s5pv210 based phones.

Signed-off-by: Tomasz Figa <tomasz.figa@gmail.com>
Signed-off-by: Paweł Chmiel <pawel.mikolaj.chmiel@gmail.com>
Acked-by: Chanwoo Choi <cw00.choi@samsung.com>
---
Changes from v1:
  - Added newline at end of file
  - Removed interrupt-parent as it is implicit
  - Added Acked-by
---
 .../bindings/extcon/extcon-fsa9480.txt        | 19 +++++++++++++++++++
 1 file changed, 19 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/extcon/extcon-fsa9480.txt
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/extcon/extcon-fsa9480.txt b/Documentation/devicetree/bindings/extcon/extcon-fsa9480.txt
new file mode 100644
index 000000000000..d592c21245f2
--- /dev/null
+++ b/Documentation/devicetree/bindings/extcon/extcon-fsa9480.txt
@@ -0,0 +1,19 @@ 
+FAIRCHILD SEMICONDUCTOR FSA9480 MICROUSB SWITCH
+
+The FSA9480 is a USB port accessory detector and switch. The FSA9480 is fully
+controlled using I2C and enables USB data, stereo and mono audio, video,
+microphone, and UART data to use a common connector port.
+
+Required properties:
+ - compatible : Must be "fcs,fsa9480"
+ - reg : Specifies i2c slave address. Must be 0x25.
+ - interrupts : Should contain one entry specifying interrupt signal of
+   interrupt parent to which interrupt pin of the chip is connected.
+
+ Example:
+	musb@25 {
+		compatible = "fcs,fsa9480";
+		reg = <0x25>;
+		interrupt-parent = <&gph2>;
+		interrupts = <7 0>;
+	};