Message ID | 20190215050957.20755-9-anarsoul@gmail.com |
---|---|
State | Changes Requested, archived |
Headers | show |
Series | Analogix ANX6345 RGB-(e)DP bridge support | expand |
Context | Check | Description |
---|---|---|
robh/checkpatch | warning | "total: 0 errors, 2 warnings, 45 lines checked" |
Hi Vasily. On Thu, Feb 14, 2019 at 09:09:54PM -0800, Vasily Khoruzhick via dri-devel wrote: > This commit adds support for the BOE HB140WX1-501 14" WXGA TFT LCD > panel. > > Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com> > --- > .../display/panel/boe,hb140wx1-501.txt | 7 +++++ > drivers/gpu/drm/panel/panel-simple.c | 26 +++++++++++++++++++ > 2 files changed, 33 insertions(+) > create mode 100644 Documentation/devicetree/bindings/display/panel/boe,hb140wx1-501.txt > > diff --git a/Documentation/devicetree/bindings/display/panel/boe,hb140wx1-501.txt b/Documentation/devicetree/bindings/display/panel/boe,hb140wx1-501.txt > new file mode 100644 > index 000000000000..fc6f085eb8d1 > --- /dev/null > +++ b/Documentation/devicetree/bindings/display/panel/boe,hb140wx1-501.txt > @@ -0,0 +1,7 @@ > +BOE HB140WX1-501 14" WXGA (1366x768) TFT LCD panel > + > +Required properties: > +- compatible: should be "boe,hb140wx1-501" > + > +This binding is compatible with the simple-panel binding, which is specified > +in simple-panel.txt in this directory. boe must be added to vendor-prefixes.txt (It is not present in the file I checked, but I may have been added later) It is usual practice to split the patch in a dt-bindings: patch and a driver patch. And for the dt-bindings patch follow the submission rules laid out in Documentation/devicetree/bindings/submitting-patches.txt > diff --git a/drivers/gpu/drm/panel/panel-simple.c b/drivers/gpu/drm/panel/panel-simple.c > index 9c69e739a524..9a4c9dd02c6c 100644 > --- a/drivers/gpu/drm/panel/panel-simple.c > +++ b/drivers/gpu/drm/panel/panel-simple.c > @@ -828,6 +828,29 @@ static const struct panel_desc bananapi_s070wv20_ct16 = { > }, > }; > > +static const struct drm_display_mode boe_hb140wx1_mode = { > + .clock = 72300, > + .hdisplay = 1366, > + .hsync_start = 1366 + 48, > + .hsync_end = 1366 + 48 + 32, > + .htotal = 1366 + 48 + 32 + 80, > + .vdisplay = 768, > + .vsync_start = 768 + 3, > + .vsync_end = 768 + 3 + 6, > + .vtotal = 768 + 3 + 6 + 13, > + .vrefresh = 60, > + .flags = DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_NVSYNC, +1 for specifying .flags. > +}; > + > +static const struct panel_desc boe_hb140wx1 = { > + .modes = &boe_hb140wx1_mode, > + .num_modes = 1, > + .size = { > + .width = 310, > + .height = 170, > + }, > +}; No .bus_format and no .bus_flags specified. Are they not used by this panel or are you lucky and the default works? > + > static const struct drm_display_mode boe_hv070wsa_mode = { > .clock = 42105, > .hdisplay = 1024, > @@ -2541,6 +2564,9 @@ static const struct of_device_id platform_of_match[] = { > }, { > .compatible = "bananapi,s070wv20-ct16", > .data = &bananapi_s070wv20_ct16, > + }, { > + .compatible = "boe,hb140wx1-501", > + .data = &boe_hb140wx1 It is common practice to end the line with a "," so one do not need to modify this line if an extra line is required. With the comments addressed you can add my: Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
On Sat, Feb 16, 2019 at 12:43 PM Sam Ravnborg <sam@ravnborg.org> wrote: > > Hi Vasily. Hi Sam, > On Thu, Feb 14, 2019 at 09:09:54PM -0800, Vasily Khoruzhick via dri-devel wrote: > > This commit adds support for the BOE HB140WX1-501 14" WXGA TFT LCD > > panel. > > > > Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com> > > --- > > .../display/panel/boe,hb140wx1-501.txt | 7 +++++ > > drivers/gpu/drm/panel/panel-simple.c | 26 +++++++++++++++++++ > > 2 files changed, 33 insertions(+) > > create mode 100644 Documentation/devicetree/bindings/display/panel/boe,hb140wx1-501.txt > > > > diff --git a/Documentation/devicetree/bindings/display/panel/boe,hb140wx1-501.txt b/Documentation/devicetree/bindings/display/panel/boe,hb140wx1-501.txt > > new file mode 100644 > > index 000000000000..fc6f085eb8d1 > > --- /dev/null > > +++ b/Documentation/devicetree/bindings/display/panel/boe,hb140wx1-501.txt > > @@ -0,0 +1,7 @@ > > +BOE HB140WX1-501 14" WXGA (1366x768) TFT LCD panel > > + > > +Required properties: > > +- compatible: should be "boe,hb140wx1-501" > > + > > +This binding is compatible with the simple-panel binding, which is specified > > +in simple-panel.txt in this directory. > > boe must be added to vendor-prefixes.txt > (It is not present in the file I checked, but I may have been added later) It's been there for quite a while, it's added in 27d23b30a561b which was included in 4.5. > It is usual practice to split the patch in a dt-bindings: patch and a driver patch. > And for the dt-bindings patch follow the submission rules laid out > in Documentation/devicetree/bindings/submitting-patches.txt I checked git log for drivers/gpu/drm/panel/panel-simple.c and looks like recent commits for this file added binding and timings in a single commit. I can split it into separate file if maintainers insist though. > > diff --git a/drivers/gpu/drm/panel/panel-simple.c b/drivers/gpu/drm/panel/panel-simple.c > > index 9c69e739a524..9a4c9dd02c6c 100644 > > --- a/drivers/gpu/drm/panel/panel-simple.c > > +++ b/drivers/gpu/drm/panel/panel-simple.c > > @@ -828,6 +828,29 @@ static const struct panel_desc bananapi_s070wv20_ct16 = { > > }, > > }; > > > > +static const struct drm_display_mode boe_hb140wx1_mode = { > > + .clock = 72300, > > + .hdisplay = 1366, > > + .hsync_start = 1366 + 48, > > + .hsync_end = 1366 + 48 + 32, > > + .htotal = 1366 + 48 + 32 + 80, > > + .vdisplay = 768, > > + .vsync_start = 768 + 3, > > + .vsync_end = 768 + 3 + 6, > > + .vtotal = 768 + 3 + 6 + 13, > > + .vrefresh = 60, > > + .flags = DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_NVSYNC, > > +1 for specifying .flags. > > > +}; > > + > > +static const struct panel_desc boe_hb140wx1 = { > > + .modes = &boe_hb140wx1_mode, > > + .num_modes = 1, > > + .size = { > > + .width = 310, > > + .height = 170, > > + }, > > +}; > No .bus_format and no .bus_flags specified. > Are they not used by this panel or are you lucky and the default works? This is eDP panel, it doesn't need bus_format or bus_flags. > > + > > static const struct drm_display_mode boe_hv070wsa_mode = { > > .clock = 42105, > > .hdisplay = 1024, > > @@ -2541,6 +2564,9 @@ static const struct of_device_id platform_of_match[] = { > > }, { > > .compatible = "bananapi,s070wv20-ct16", > > .data = &bananapi_s070wv20_ct16, > > + }, { > > + .compatible = "boe,hb140wx1-501", > > + .data = &boe_hb140wx1 > It is common practice to end the line with a "," so one do not need to modify > this line if an extra line is required. OK, will do. > > With the comments addressed you can add my: > Reviewed-by: Sam Ravnborg <sam@ravnborg.org> >
Hi Vasily > > > > boe must be added to vendor-prefixes.txt > > (It is not present in the file I checked, but I may have been added later) > > It's been there for quite a while, it's added in 27d23b30a561b which > was included > in 4.5. Yep, at second look it was there in the file I looked at too. Sam
diff --git a/Documentation/devicetree/bindings/display/panel/boe,hb140wx1-501.txt b/Documentation/devicetree/bindings/display/panel/boe,hb140wx1-501.txt new file mode 100644 index 000000000000..fc6f085eb8d1 --- /dev/null +++ b/Documentation/devicetree/bindings/display/panel/boe,hb140wx1-501.txt @@ -0,0 +1,7 @@ +BOE HB140WX1-501 14" WXGA (1366x768) TFT LCD panel + +Required properties: +- compatible: should be "boe,hb140wx1-501" + +This binding is compatible with the simple-panel binding, which is specified +in simple-panel.txt in this directory. diff --git a/drivers/gpu/drm/panel/panel-simple.c b/drivers/gpu/drm/panel/panel-simple.c index 9c69e739a524..9a4c9dd02c6c 100644 --- a/drivers/gpu/drm/panel/panel-simple.c +++ b/drivers/gpu/drm/panel/panel-simple.c @@ -828,6 +828,29 @@ static const struct panel_desc bananapi_s070wv20_ct16 = { }, }; +static const struct drm_display_mode boe_hb140wx1_mode = { + .clock = 72300, + .hdisplay = 1366, + .hsync_start = 1366 + 48, + .hsync_end = 1366 + 48 + 32, + .htotal = 1366 + 48 + 32 + 80, + .vdisplay = 768, + .vsync_start = 768 + 3, + .vsync_end = 768 + 3 + 6, + .vtotal = 768 + 3 + 6 + 13, + .vrefresh = 60, + .flags = DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_NVSYNC, +}; + +static const struct panel_desc boe_hb140wx1 = { + .modes = &boe_hb140wx1_mode, + .num_modes = 1, + .size = { + .width = 310, + .height = 170, + }, +}; + static const struct drm_display_mode boe_hv070wsa_mode = { .clock = 42105, .hdisplay = 1024, @@ -2541,6 +2564,9 @@ static const struct of_device_id platform_of_match[] = { }, { .compatible = "bananapi,s070wv20-ct16", .data = &bananapi_s070wv20_ct16, + }, { + .compatible = "boe,hb140wx1-501", + .data = &boe_hb140wx1 }, { .compatible = "boe,hv070wsa-100", .data = &boe_hv070wsa
This commit adds support for the BOE HB140WX1-501 14" WXGA TFT LCD panel. Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com> --- .../display/panel/boe,hb140wx1-501.txt | 7 +++++ drivers/gpu/drm/panel/panel-simple.c | 26 +++++++++++++++++++ 2 files changed, 33 insertions(+) create mode 100644 Documentation/devicetree/bindings/display/panel/boe,hb140wx1-501.txt