@@ -22,9 +22,9 @@ required and optional properties.
Required properties for GPHY firmware loading:
-- compatible : "lantiq,gphy-fw" and "lantiq,xrx200-gphy-fw",
- "lantiq,xrx200a1x-gphy-fw", "lantiq,xrx200a2x-gphy-fw",
- "lantiq,xrx300-gphy-fw", or "lantiq,xrx330-gphy-fw"
+- compatible : "lantiq,xrx200-gphy-fw", "lantiq,gphy-fw"
+ "lantiq,xrx300-gphy-fw", "lantiq,gphy-fw"
+ "lantiq,xrx330-gphy-fw", "lantiq,gphy-fw"
for the loading of the firmware into the embedded
GPHY core of the SoC.
- lantiq,rcu : reference to the rcu syscon
@@ -41,13 +41,13 @@ Example:
Ethernet switch on the VRX200 SoC:
-gswip: gswip@E108000 {
+switch@e108000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "lantiq,xrx200-gswip";
- reg = < 0xE108000 0x3000 /* switch */
- 0xE10B100 0x70 /* mdio */
- 0xE10B1D8 0x30 /* mii */
+ reg = < 0xe108000 0x3100 /* switch */
+ 0xe10b100 0xd8 /* mdio */
+ 0xe10b1d8 0x130 /* mii */
>;
dsa,member = <0 0>;
@@ -97,7 +97,7 @@ gswip: gswip@E108000 {
};
};
- mdio@0 {
+ mdio {
#address-cells = <1>;
#size-cells = <0>;
compatible = "lantiq,xrx200-mdio";
@@ -123,6 +123,8 @@ gswip: gswip@E108000 {
gphy-fw {
compatible = "lantiq,xrx200-gphy-fw", "lantiq,gphy-fw";
lantiq,rcu = <&rcu0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
gphy@20 {
reg = <0x20>;
* Use one compatible line per line in the documentation * Remove SoC revision depended compatible lines, we can detect that in the driver * Use lower case letters in hex addresses * Fix the size of the address ranges in the example, this now matches the sizes used by the SoC. The old ones will also work, this just adds some empty address space. * Change the reg size of the gphy-fw node Fixes: 86ce2bc73c7a ("dt-bindings: net: dsa: Add lantiq, xrx200-gswip DT bindings") Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Cc: devicetree@vger.kernel.org --- .../devicetree/bindings/net/dsa/lantiq-gswip.txt | 18 ++++++++++-------- 1 file changed, 10 insertions(+), 8 deletions(-)