| Message ID | 20180508141704.24271-1-dmurphy@ti.com |
|---|---|
| State | Changes Requested, archived |
| Headers | show |
| Series | [v2,1/2] dt: bindings: lm3601x: Introduce the lm3601x driver | expand |
On 05/08/2018 09:17 AM, Dan Murphy wrote: > Introduce the device tree bindings for the lm3601x > family of LED torch, flash and IR drivers. > > Signed-off-by: Dan Murphy <dmurphy@ti.com> > --- > > v2 - No changes - https://patchwork.kernel.org/patch/10384587/ > > .../devicetree/bindings/leds/leds-lm3601x.txt | 51 +++++++++++++++++++ > 1 file changed, 51 insertions(+) > create mode 100644 Documentation/devicetree/bindings/leds/leds-lm3601x.txt > > diff --git a/Documentation/devicetree/bindings/leds/leds-lm3601x.txt b/Documentation/devicetree/bindings/leds/leds-lm3601x.txt > new file mode 100644 > index 000000000000..38cdabf6ca7e > --- /dev/null > +++ b/Documentation/devicetree/bindings/leds/leds-lm3601x.txt > @@ -0,0 +1,51 @@ > +* Texas Instruments - lm3601x Single-LED Flash Driver > + > +The LM3601X are ultra-small LED flash drivers that > +provides a high level of adjustability. > + > +Required properties: > + - compatible : Can be one of the following > + "ti,lm3601x" No wildcard compatibles, drop this. > + "ti,lm36010" > + "ti,lm36011" > + - reg : I2C slave address > + - #address-cells : 1 > + - #size-cells : 0 > + > +Required child properties: > + - reg : 0 - Indicates to support and register a torch interface > + 1 - Indicates to support and register a strobe interface > + 2 - Indicates to support and register an ir interface > + > +Optional child properties: > + - label : see Documentation/devicetree/bindings/leds/common.txt > + Relative path might work better here. > +Example: > +led-controller@64 { > + compatible = "ti,lm3601x"; > + #address-cells = <1>; > + #size-cells = <0>; > + reg = <0x64>; > + > + led@0 { > + reg = <0>; > + label = "white:torch"; > + led-max-microamp=<10000>; > + }; > + > + led@1 { > + reg = <1>; > + label = "white:strobe"; > + flash-max-microamp=<10000>; > + flash-max-timeout-us=<800>; > + }; > + > + led@2 { > + reg = <2>; > + label = "invisible:ir"; > + }; > +} > + > +For more product information please see the links below: > +http://www.ti.com/product/LM36010 > +http://www.ti.com/product/LM36011 > -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On 05/08/2018 09:17 AM, Dan Murphy wrote: > Introduce the family of LED devices that can > drive a torch, strobe or IR LED. > > The LED driver can be configured with a strobe > timer to execute a strobe flash. The IR LED > brightness is controlled via the torch brightness > register. > > The data sheet for each the LM36010 and LM36011 > LED drivers can be found here: > http://www.ti.com/product/LM36010 > http://www.ti.com/product/LM36011 > > Signed-off-by: Dan Murphy <dmurphy@ti.com> > --- > > v2 - Fixed kbuild issue and removed unused cdev_strobe - https://patchwork.kernel.org/patch/10384585/ > > drivers/leds/Kconfig | 9 + > drivers/leds/Makefile | 1 + > drivers/leds/leds-lm3601x.c | 591 ++++++++++++++++++++++++++++++++++++ > 3 files changed, 601 insertions(+) > create mode 100644 drivers/leds/leds-lm3601x.c > > diff --git a/drivers/leds/Kconfig b/drivers/leds/Kconfig > index 2c896c0e69e1..50ae536f343f 100644 > --- a/drivers/leds/Kconfig > +++ b/drivers/leds/Kconfig > @@ -145,6 +145,15 @@ config LEDS_LM3692X > This option enables support for the TI LM3692x family > of white LED string drivers used for backlighting. > > +config LEDS_LM3601X > + tristate "LED support for LM3601x Chips" > + depends on LEDS_CLASS && I2C && OF > + depends on LEDS_CLASS_FLASH > + select REGMAP_I2C > + help > + This option enables support for the TI LM3601x family > + of flash, torch and indicator classes. > + > config LEDS_LOCOMO > tristate "LED Support for Locomo device" > depends on LEDS_CLASS > diff --git a/drivers/leds/Makefile b/drivers/leds/Makefile > index 91eca81cae82..b79807fe1b67 100644 > --- a/drivers/leds/Makefile > +++ b/drivers/leds/Makefile > @@ -76,6 +76,7 @@ obj-$(CONFIG_LEDS_MLXREG) += leds-mlxreg.o > obj-$(CONFIG_LEDS_NIC78BX) += leds-nic78bx.o > obj-$(CONFIG_LEDS_MT6323) += leds-mt6323.o > obj-$(CONFIG_LEDS_LM3692X) += leds-lm3692x.o > +obj-$(CONFIG_LEDS_LM3601X) += leds-lm3601x.o > > # LED SPI Drivers > obj-$(CONFIG_LEDS_DAC124S085) += leds-dac124s085.o > diff --git a/drivers/leds/leds-lm3601x.c b/drivers/leds/leds-lm3601x.c > new file mode 100644 > index 000000000000..2d7a4a2e541f > --- /dev/null > +++ b/drivers/leds/leds-lm3601x.c > @@ -0,0 +1,591 @@ > +// SPDX-License-Identifier: GPL-2.0 > +/* > + * Flash and torch driver for Texas Instruments LM3601X LED > + * Flash driver chip family > + * Copyright (C) 2018 Texas Instruments Copyright (C) 2018 Texas Instruments Incorporated - http://www.ti.com/ > + */ > + > +#include <linux/delay.h> > +#include <linux/i2c.h> > +#include <linux/leds.h> > +#include <linux/led-class-flash.h> > +#include <linux/module.h> > +#include <linux/regmap.h> > +#include <linux/slab.h> > +#include <uapi/linux/uleds.h> > + > +#define LM3601X_LED_TORCH 0x0 > +#define LM3601X_LED_STROBE 0x1 > +#define LM3601X_LED_IR 0x2 > + > +/* Registers */ > +#define LM3601X_ENABLE_REG 0x01 > +#define LM3601X_CFG_REG 0x02 > +#define LM3601X_LED_FLASH_REG 0x03 > +#define LM3601X_LED_TORCH_REG 0x04 > +#define LM3601X_FLAGS_REG 0x05 > +#define LM3601X_DEV_ID_REG 0x06 > + > +#define LM3601X_SW_RESET BIT(7) > + > +/* Enable Mode bits */ > +#define LM3601X_MODE_STANDBY 0x00 > +#define LM3601X_MODE_IR_DRV BIT(0) > +#define LM3601X_MODE_TORCH BIT(1) > +#define LM3601X_MODE_STROBE (BIT(0) | BIT(1)) > +#define LM3601X_STRB_EN BIT(2) > +#define LM3601X_STRB_LVL_TRIG ~BIT(3) > +#define LM3601X_STRB_EDGE_TRIG BIT(3) > +#define LM3601X_IVFM_EN BIT(4) > + > +#define LM36010_BOOST_LIMIT_19 ~BIT(5) > +#define LM36010_BOOST_LIMIT_28 BIT(5) > +#define LM36010_BOOST_FREQ_2MHZ ~BIT(6) > +#define LM36010_BOOST_FREQ_4MHZ BIT(6) > +#define LM36010_BOOST_MODE_NORM ~BIT(7) > +#define LM36010_BOOST_MODE_PASS BIT(7) > + > +/* Flag Mask */ > +#define LM3601X_FLASH_TIME_OUT BIT(0) > +#define LM3601X_UVLO_FAULT BIT(1) > +#define LM3601X_THERM_SHUTDOWN BIT(2) > +#define LM3601X_THERM_CURR BIT(3) > +#define LM36010_CURR_LIMIT BIT(4) > +#define LM3601X_SHORT_FAULT BIT(5) > +#define LM3601X_IVFM_TRIP BIT(6) > +#define LM36010_OVP_FAULT BIT(7) > + > +#define LM3601X_MIN_TORCH_I_UA 2400 > +#define LM3601X_MIN_STROBE_I_MA 11 > + > +enum lm3601x_type { > + CHIP_LM36010 = 0, > + CHIP_LM36011, > +}; > + > +struct lm3601x_max_timeouts { > + int timeout; > + int reg_val; > +}; > + > +/** > + * struct lm3601x_led - > + * @lock - Lock for reading/writing the device > + * @regmap - Devices register map > + * @client - Pointer to the I2C client > + * @cdev_torch - led class device pointer for the torch > + * @cdev_ir - led class device pointer for infrared > + * @fled_cdev - flash led class device pointer > + * @strobe_node - DT device node for the strobe > + * @torch - LED label for the torch > + * @strobe - LED label for the strobe > + * @ir - LED label for the infrared > + * @last_flag - last known flags register value > + * @strobe_timeout - the timeout for the strobe > + * @torch_current_max - maximum current for the torch > + * @strobe_current_max - maximum current for the strobe > + * @max_strobe_timeout - maximum timeout for the strobe > + */ Prefer: @strobe_current_max: maximum current ... ^^^ > +struct lm3601x_led { > + struct mutex lock; > + struct regmap *regmap; > + struct i2c_client *client; > + > + struct led_classdev cdev_torch; > + struct led_classdev cdev_ir; > + > + struct led_classdev_flash fled_cdev; > + > + struct device_node *strobe_node; > + struct device_node *torch_node; > + struct device_node *ir_node; > + > + char torch[LED_MAX_NAME_SIZE]; > + char strobe[LED_MAX_NAME_SIZE]; > + char ir[LED_MAX_NAME_SIZE]; > + > + unsigned int last_flag; > + unsigned int strobe_timeout; > + > + u32 torch_current_max; > + u32 strobe_current_max; > + u32 max_strobe_timeout; > +}; > + > +static const struct lm3601x_max_timeouts strobe_timeouts[] = { > + { 40, 0x00 }, > + { 80, 0x01 }, > + { 120, 0x02 }, > + { 160, 0x03 }, > + { 200, 0x04 }, > + { 240, 0x05 }, > + { 280, 0x06 }, > + { 320, 0x07 }, > + { 360, 0x08 }, > + { 400, 0x09 }, > + { 600, 0x0a }, > + { 800, 0x0b }, > + { 1000, 0x0c }, > + { 1200, 0x0d }, > + { 1400, 0x0e }, > + { 1600, 0x0f }, > +}; > + > +static const struct reg_default lm3601x_regmap_defs[] = { > + { LM3601X_ENABLE_REG, 0x20 }, > + { LM3601X_CFG_REG, 0x15 }, > + { LM3601X_LED_FLASH_REG, 0x00 }, > + { LM3601X_LED_TORCH_REG, 0x00 }, > + { LM3601X_FLAGS_REG, 0x00 }, > + { LM3601X_DEV_ID_REG, 0x01 }, Flag register is volatile and should be marked as such. No need to give a default for that or ID, those should be read fresh. > +}; > + > +static const struct regmap_config lm3601x_regmap = { > + .reg_bits = 8, > + .val_bits = 8, > + > + .max_register = LM3601X_DEV_ID_REG, > + .reg_defaults = lm3601x_regmap_defs, > + .num_reg_defaults = ARRAY_SIZE(lm3601x_regmap_defs), > + .cache_type = REGCACHE_NONE, Why no caching? > +}; > + > +static struct lm3601x_led *fled_cdev_to_led( > + struct led_classdev_flash *fled_cdev) > +{ > + return container_of(fled_cdev, struct lm3601x_led, fled_cdev); > +} > + > +static int lm3601x_read_faults(struct lm3601x_led *led) > +{ > + int flags_val; > + int ret; > + > + ret = regmap_read(led->regmap, LM3601X_FLAGS_REG, &flags_val); > + if (ret < 0) > + return -EIO; > + > + led->last_flag = flags_val; > + > + return led->last_flag; > +} > + > +static int lm3601x_torch_brightness_set(struct led_classdev *cdev, > + enum led_brightness brightness) > +{ > + struct lm3601x_led *led = > + container_of(cdev, struct lm3601x_led, cdev_torch); > + int ret; > + u8 brightness_val; > + > + mutex_lock(&led->lock); > + > + ret = lm3601x_read_faults(led); > + > + if (brightness == LED_OFF) { > + ret = regmap_update_bits(led->regmap, LM3601X_ENABLE_REG, > + LM3601X_MODE_TORCH, LED_OFF); > + goto out; > + } > + > + if (brightness == LED_ON) > + brightness_val = LED_ON; > + else > + brightness_val = (brightness/2); > + > + ret = regmap_write(led->regmap, LM3601X_LED_TORCH_REG, brightness_val); > + if (ret < 0) > + goto out; > + > + ret = regmap_update_bits(led->regmap, LM3601X_ENABLE_REG, > + LM3601X_MODE_TORCH, > + LM3601X_MODE_TORCH); > + > +out: > + mutex_unlock(&led->lock); > + return ret; > +} > + > +static int lm3601x_strobe_set(struct led_classdev_flash *fled_cdev, > + bool state) > +{ > + struct lm3601x_led *led = fled_cdev_to_led(fled_cdev); > + int ret; > + int current_timeout; > + int reg_count; > + int i; > + int timeout_reg_val = 0; > + > + mutex_lock(&led->lock); > + > + ret = regmap_read(led->regmap, LM3601X_CFG_REG, ¤t_timeout); > + if (ret < 0) > + goto out; > + > + reg_count = sizeof(strobe_timeouts) / sizeof(strobe_timeouts[0]); > + for (i = 0; i < reg_count; i++) { > + if (led->strobe_timeout > strobe_timeouts[i].timeout) > + continue; > + > + if (led->strobe_timeout <= strobe_timeouts[i].timeout) { > + timeout_reg_val = (strobe_timeouts[i].reg_val << 1); > + break; > + } > + > + ret = -EINVAL; > + goto out; > + }; > + > + if (led->strobe_timeout != current_timeout) > + ret = regmap_update_bits(led->regmap, LM3601X_CFG_REG, > + 0x1e, timeout_reg_val); > + > + if (state) > + ret = regmap_update_bits(led->regmap, LM3601X_ENABLE_REG, > + LM3601X_MODE_STROBE, > + LM3601X_MODE_STROBE); > + else > + ret = regmap_update_bits(led->regmap, LM3601X_ENABLE_REG, > + LM3601X_MODE_STROBE, LED_OFF); > + > + ret = lm3601x_read_faults(led); > +out: > + mutex_unlock(&led->lock); > + return ret; > +} > + > +static int lm3601x_strobe_brightness_set(struct led_classdev *cdev, > + enum led_brightness brightness) > +{ > + struct led_classdev_flash *fled_cdev = lcdev_to_flcdev(cdev); > + struct lm3601x_led *led = fled_cdev_to_led(fled_cdev); > + int ret; > + u8 brightness_val; > + > + mutex_lock(&led->lock); > + ret = lm3601x_read_faults(led); > + > + if (brightness == LED_OFF) { > + ret = regmap_update_bits(led->regmap, LM3601X_ENABLE_REG, > + LM3601X_MODE_STROBE, LED_OFF); > + goto out; > + } > + > + if (brightness == LED_ON) > + brightness_val = LED_ON; > + else > + brightness_val = (brightness/2); > + > + ret = regmap_write(led->regmap, LM3601X_LED_FLASH_REG, brightness_val); > + > +out: > + mutex_unlock(&led->lock); > + return ret; > +} > + > +static int lm3601x_strobe_timeout_set(struct led_classdev_flash *fled_cdev, > + u32 timeout) > +{ > + struct lm3601x_led *led = fled_cdev_to_led(fled_cdev); > + int ret = 0; > + > + mutex_lock(&led->lock); > + > + if (timeout > led->max_strobe_timeout) > + ret = -EINVAL; > + else > + led->strobe_timeout = timeout; > + > + mutex_unlock(&led->lock); > + > + return ret; > +} > + > +static int lm3601x_strobe_get(struct led_classdev_flash *fled_cdev, > + bool *state) > +{ > + struct lm3601x_led *led = fled_cdev_to_led(fled_cdev); > + int ret; > + int strobe_state; > + > + mutex_lock(&led->lock); > + > + ret = regmap_read(led->regmap, LM3601X_ENABLE_REG, &strobe_state); > + if (ret < 0) > + return ret; Need to unlock here > + > + *state = strobe_state & LM3601X_MODE_STROBE; > + > + mutex_unlock(&led->lock); > + > + return ret; > +} > + > +static int lm3601x_ir_brightness_set(struct led_classdev *cdev, > + enum led_brightness brightness) > +{ > + struct lm3601x_led *led = > + container_of(cdev, struct lm3601x_led, cdev_ir); > + int ret; > + u8 brightness_val; > + > + mutex_lock(&led->lock); > + ret = lm3601x_read_faults(led); > + > + if (brightness == LED_OFF) { > + ret = regmap_update_bits(led->regmap, LM3601X_ENABLE_REG, > + 0xfe, LED_OFF); > + goto out; > + } > + > + if (brightness == LED_ON) > + brightness_val = LED_ON; > + else > + brightness_val = (brightness/2); > + > + ret = regmap_write(led->regmap, LM3601X_LED_FLASH_REG, brightness_val); > + ret value is lost > + ret = regmap_update_bits(led->regmap, LM3601X_ENABLE_REG, > + LM3601X_MODE_IR_DRV, > + LM3601X_MODE_IR_DRV); > + > +out: > + mutex_unlock(&led->lock); > + return ret; > +} > + > +static int lm3601x_strobe_fault_get(struct led_classdev_flash *fled_cdev, > + u32 *fault) > +{ > + struct lm3601x_led *led = fled_cdev_to_led(fled_cdev); > + > + lm3601x_read_faults(led); > + > + *fault = led->last_flag; > + > + return 0; > +} > + > +static const struct led_flash_ops strobe_ops = { > + .strobe_set = lm3601x_strobe_set, > + .strobe_get = lm3601x_strobe_get, > + .timeout_set = lm3601x_strobe_timeout_set, > + .fault_get = lm3601x_strobe_fault_get, > +}; > + > +static int lm3601x_register_leds(struct lm3601x_led *led) > +{ > + struct led_classdev_flash *fled_cdev; > + struct led_classdev *led_cdev; > + int err = -ENODEV; > + > + if (led->torch_node) { > + led->cdev_torch.name = led->torch; > + led->cdev_torch.max_brightness = LED_FULL; > + led->cdev_torch.brightness_set_blocking = lm3601x_torch_brightness_set; > + err = devm_led_classdev_register(&led->client->dev, > + &led->cdev_torch); > + if (err < 0) > + goto class_reg_err; > + } > + > + if (led->strobe_node) { > + fled_cdev = &led->fled_cdev; > + fled_cdev->ops = &strobe_ops; > + > + led_cdev = &fled_cdev->led_cdev; > + led_cdev->name = led->strobe; > + led_cdev->max_brightness = LED_FULL; > + led_cdev->brightness_set_blocking = lm3601x_strobe_brightness_set; > + led_cdev->flags |= LED_DEV_CAP_FLASH; > + > + err = led_classdev_flash_register(&led->client->dev, > + fled_cdev); > + if (err < 0) > + goto class_reg_err; > + } > + > + if (led->ir_node) { > + led->cdev_ir.name = led->ir; > + led->cdev_ir.max_brightness = LED_FULL; > + led->cdev_ir.brightness_set_blocking = > + lm3601x_ir_brightness_set; > + > + err = devm_led_classdev_register(&led->client->dev, > + &led->cdev_ir); > + } > + > +class_reg_err: > + return err; Why do you need this label, just return from where it is called > +} > + > +static void lm3601x_init_flash_timeout(struct lm3601x_led *led) > +{ > + struct led_flash_setting *setting; > + > + setting = &led->fled_cdev.timeout; > + setting->min = strobe_timeouts[0].timeout; > + setting->max = led->max_strobe_timeout; > + setting->step = 40; > + setting->val = led->max_strobe_timeout; > +} > + > +static int lm3601x_parse_node(struct lm3601x_led *led, > + struct device_node *node) > +{ > + struct device_node *child_node; > + const char *name; > + int ret = -ENODEV; > + > + for_each_available_child_of_node(node, child_node) { > + u32 id = 0; > + > + of_property_read_u32(child_node, "reg", &id); > + > + switch (id) { > + case LM3601X_LED_TORCH: > + led->torch_node = of_node_get(child_node); > + break; > + case LM3601X_LED_STROBE: > + led->strobe_node = of_node_get(child_node); > + break; > + case LM3601X_LED_IR: > + led->ir_node = of_node_get(child_node); > + break; > + default: > + dev_warn(&led->client->dev, > + "unknown LED %u encountered, ignoring\n", id); > + break; > + } > + } > + > + if (led->torch_node) { > + ret = of_property_read_string(led->torch_node, "label", &name); > + if (!ret) > + snprintf(led->torch, sizeof(led->torch), > + "%s:%s", led->torch_node->name, name); > + else > + snprintf(led->torch, sizeof(led->torch), > + "%s:torch", led->torch_node->name); > + ret = of_property_read_u32(led->torch_node, "led-max-microamp", > + &led->torch_current_max); > + if (ret < 0) { > + led->torch_current_max = LM3601X_MIN_TORCH_I_UA; > + dev_warn(&led->client->dev, > + "led-max-microamp DT property missing\n"); > + } > + } > + > + if (led->strobe_node) { > + ret = of_property_read_string(led->strobe_node, "label", &name); > + if (!ret) > + snprintf(led->strobe, sizeof(led->strobe), > + "%s:%s", led->strobe_node->name, name); > + else > + snprintf(led->strobe, sizeof(led->strobe), > + "%s::strobe", led->strobe_node->name); > + > + ret = of_property_read_u32(led->strobe_node, > + "flash-max-microamp", > + &led->strobe_current_max); > + if (ret < 0) { > + led->strobe_current_max = LM3601X_MIN_STROBE_I_MA; > + dev_warn(&led->client->dev, > + "flash-max-microamp DT property missing\n"); > + } > + > + ret = of_property_read_u32(led->strobe_node, > + "flash-max-timeout-us", > + &led->max_strobe_timeout); > + if (ret < 0) { > + led->max_strobe_timeout = strobe_timeouts[0].reg_val; > + dev_warn(&led->client->dev, > + "flash-max-timeout-us DT property missing\n"); > + } > + > + lm3601x_init_flash_timeout(led); > + > + } > + > + if (led->ir_node) { > + ret = of_property_read_string(led->ir_node, "label", &name); > + if (!ret) > + snprintf(led->ir, sizeof(led->ir), > + "%s:%s", led->ir_node->name, name); > + else > + snprintf(led->ir, sizeof(led->ir), > + "%s::infrared", led->ir_node->name); > + } > + > + return ret; > +} > + > +static int lm3601x_probe(struct i2c_client *client, > + const struct i2c_device_id *id) > +{ > + struct lm3601x_led *led; > + int err; > + > + led = devm_kzalloc(&client->dev, > + sizeof(struct lm3601x_led), GFP_KERNEL); > + if (!led) > + return -ENOMEM; > + > + err = lm3601x_parse_node(led, client->dev.of_node); > + if (err < 0) > + return -ENODEV; > + > + led->client = client; > + led->regmap = devm_regmap_init_i2c(client, &lm3601x_regmap); > + if (IS_ERR(led->regmap)) { > + err = PTR_ERR(led->regmap); > + dev_err(&client->dev, > + "Failed to allocate register map: %d\n", err); > + return err; > + } > + > + mutex_init(&led->lock); > + i2c_set_clientdata(client, led); > + err = lm3601x_register_leds(led); > + > + return err; > +} > + > +static int lm3601x_remove(struct i2c_client *client) > +{ > + struct lm3601x_led *led = i2c_get_clientdata(client); > + > + regmap_write(led->regmap, LM3601X_ENABLE_REG, 0); > + > + return 0; > +} > + > +static const struct i2c_device_id lm3601x_id[] = { > + {"LM36010", CHIP_LM36010}, > + {"LM36011", CHIP_LM36011}, > + {} > +}; > +MODULE_DEVICE_TABLE(i2c, lm3601x_id); > + > +static const struct of_device_id of_lm3601x_leds_match[] = { > + { .compatible = "ti,lm3601x", }, > + { .compatible = "ti,lm36010", }, > + { .compatible = "ti,lm36011", }, > + {}, > +}; > +MODULE_DEVICE_TABLE(of, of_lm3601x_leds_match); > + > +static struct i2c_driver lm3601x_i2c_driver = { > + .driver = { > + .name = "lm3601x", > + .of_match_table = of_lm3601x_leds_match, > + }, > + .probe = lm3601x_probe, > + .remove = lm3601x_remove, > + .id_table = lm3601x_id, > +}; > +module_i2c_driver(lm3601x_i2c_driver); > + > +MODULE_DESCRIPTION("Texas Instruments Flash Lighting driver for LM3601X"); > +MODULE_AUTHOR("Dan Murphy <dmurphy@ti.com>"); > +MODULE_LICENSE("GPL v2"); > -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Andrew Thanks for the review On 05/08/2018 10:49 AM, Andrew F. Davis wrote: > On 05/08/2018 09:17 AM, Dan Murphy wrote: >> Introduce the family of LED devices that can >> drive a torch, strobe or IR LED. >> >> The LED driver can be configured with a strobe >> timer to execute a strobe flash. The IR LED >> brightness is controlled via the torch brightness >> register. >> >> The data sheet for each the LM36010 and LM36011 >> LED drivers can be found here: >> http://www.ti.com/product/LM36010 >> http://www.ti.com/product/LM36011 >> >> Signed-off-by: Dan Murphy <dmurphy@ti.com> >> --- >> >> v2 - Fixed kbuild issue and removed unused cdev_strobe - https://patchwork.kernel.org/patch/10384585/ >> >> drivers/leds/Kconfig | 9 + >> drivers/leds/Makefile | 1 + >> drivers/leds/leds-lm3601x.c | 591 ++++++++++++++++++++++++++++++++++++ >> 3 files changed, 601 insertions(+) >> create mode 100644 drivers/leds/leds-lm3601x.c >> >> diff --git a/drivers/leds/Kconfig b/drivers/leds/Kconfig >> index 2c896c0e69e1..50ae536f343f 100644 >> --- a/drivers/leds/Kconfig >> +++ b/drivers/leds/Kconfig >> @@ -145,6 +145,15 @@ config LEDS_LM3692X >> This option enables support for the TI LM3692x family >> of white LED string drivers used for backlighting. >> >> +config LEDS_LM3601X >> + tristate "LED support for LM3601x Chips" >> + depends on LEDS_CLASS && I2C && OF >> + depends on LEDS_CLASS_FLASH >> + select REGMAP_I2C >> + help >> + This option enables support for the TI LM3601x family >> + of flash, torch and indicator classes. >> + >> config LEDS_LOCOMO >> tristate "LED Support for Locomo device" >> depends on LEDS_CLASS >> diff --git a/drivers/leds/Makefile b/drivers/leds/Makefile >> index 91eca81cae82..b79807fe1b67 100644 >> --- a/drivers/leds/Makefile >> +++ b/drivers/leds/Makefile >> @@ -76,6 +76,7 @@ obj-$(CONFIG_LEDS_MLXREG) += leds-mlxreg.o >> obj-$(CONFIG_LEDS_NIC78BX) += leds-nic78bx.o >> obj-$(CONFIG_LEDS_MT6323) += leds-mt6323.o >> obj-$(CONFIG_LEDS_LM3692X) += leds-lm3692x.o >> +obj-$(CONFIG_LEDS_LM3601X) += leds-lm3601x.o >> >> # LED SPI Drivers >> obj-$(CONFIG_LEDS_DAC124S085) += leds-dac124s085.o >> diff --git a/drivers/leds/leds-lm3601x.c b/drivers/leds/leds-lm3601x.c >> new file mode 100644 >> index 000000000000..2d7a4a2e541f >> --- /dev/null >> +++ b/drivers/leds/leds-lm3601x.c >> @@ -0,0 +1,591 @@ >> +// SPDX-License-Identifier: GPL-2.0 >> +/* >> + * Flash and torch driver for Texas Instruments LM3601X LED >> + * Flash driver chip family >> + * Copyright (C) 2018 Texas Instruments > > > Copyright (C) 2018 Texas Instruments Incorporated - http://www.ti.com/ OK > > >> + */ >> + >> +#include <linux/delay.h> >> +#include <linux/i2c.h> >> +#include <linux/leds.h> >> +#include <linux/led-class-flash.h> >> +#include <linux/module.h> >> +#include <linux/regmap.h> >> +#include <linux/slab.h> >> +#include <uapi/linux/uleds.h> >> + >> +#define LM3601X_LED_TORCH 0x0 >> +#define LM3601X_LED_STROBE 0x1 >> +#define LM3601X_LED_IR 0x2 >> + >> +/* Registers */ >> +#define LM3601X_ENABLE_REG 0x01 >> +#define LM3601X_CFG_REG 0x02 >> +#define LM3601X_LED_FLASH_REG 0x03 >> +#define LM3601X_LED_TORCH_REG 0x04 >> +#define LM3601X_FLAGS_REG 0x05 >> +#define LM3601X_DEV_ID_REG 0x06 >> + >> +#define LM3601X_SW_RESET BIT(7) >> + >> +/* Enable Mode bits */ >> +#define LM3601X_MODE_STANDBY 0x00 >> +#define LM3601X_MODE_IR_DRV BIT(0) >> +#define LM3601X_MODE_TORCH BIT(1) >> +#define LM3601X_MODE_STROBE (BIT(0) | BIT(1)) >> +#define LM3601X_STRB_EN BIT(2) >> +#define LM3601X_STRB_LVL_TRIG ~BIT(3) >> +#define LM3601X_STRB_EDGE_TRIG BIT(3) >> +#define LM3601X_IVFM_EN BIT(4) >> + >> +#define LM36010_BOOST_LIMIT_19 ~BIT(5) >> +#define LM36010_BOOST_LIMIT_28 BIT(5) >> +#define LM36010_BOOST_FREQ_2MHZ ~BIT(6) >> +#define LM36010_BOOST_FREQ_4MHZ BIT(6) >> +#define LM36010_BOOST_MODE_NORM ~BIT(7) >> +#define LM36010_BOOST_MODE_PASS BIT(7) >> + >> +/* Flag Mask */ >> +#define LM3601X_FLASH_TIME_OUT BIT(0) >> +#define LM3601X_UVLO_FAULT BIT(1) >> +#define LM3601X_THERM_SHUTDOWN BIT(2) >> +#define LM3601X_THERM_CURR BIT(3) >> +#define LM36010_CURR_LIMIT BIT(4) >> +#define LM3601X_SHORT_FAULT BIT(5) >> +#define LM3601X_IVFM_TRIP BIT(6) >> +#define LM36010_OVP_FAULT BIT(7) >> + >> +#define LM3601X_MIN_TORCH_I_UA 2400 >> +#define LM3601X_MIN_STROBE_I_MA 11 >> + >> +enum lm3601x_type { >> + CHIP_LM36010 = 0, >> + CHIP_LM36011, >> +}; >> + >> +struct lm3601x_max_timeouts { >> + int timeout; >> + int reg_val; >> +}; >> + >> +/** >> + * struct lm3601x_led - >> + * @lock - Lock for reading/writing the device >> + * @regmap - Devices register map >> + * @client - Pointer to the I2C client >> + * @cdev_torch - led class device pointer for the torch >> + * @cdev_ir - led class device pointer for infrared >> + * @fled_cdev - flash led class device pointer >> + * @strobe_node - DT device node for the strobe >> + * @torch - LED label for the torch >> + * @strobe - LED label for the strobe >> + * @ir - LED label for the infrared >> + * @last_flag - last known flags register value >> + * @strobe_timeout - the timeout for the strobe >> + * @torch_current_max - maximum current for the torch >> + * @strobe_current_max - maximum current for the strobe >> + * @max_strobe_timeout - maximum timeout for the strobe >> + */ > > > Prefer: > > @strobe_current_max: maximum current ... What is the delta in your preference this is already in the struct? Are you referring to the ":"? > > ^^^ > >> +struct lm3601x_led { >> + struct mutex lock; >> + struct regmap *regmap; >> + struct i2c_client *client; >> + >> + struct led_classdev cdev_torch; >> + struct led_classdev cdev_ir; >> + >> + struct led_classdev_flash fled_cdev; >> + >> + struct device_node *strobe_node; >> + struct device_node *torch_node; >> + struct device_node *ir_node; >> + >> + char torch[LED_MAX_NAME_SIZE]; >> + char strobe[LED_MAX_NAME_SIZE]; >> + char ir[LED_MAX_NAME_SIZE]; >> + >> + unsigned int last_flag; >> + unsigned int strobe_timeout; >> + >> + u32 torch_current_max; >> + u32 strobe_current_max; >> + u32 max_strobe_timeout; >> +}; >> + >> +static const struct lm3601x_max_timeouts strobe_timeouts[] = { >> + { 40, 0x00 }, >> + { 80, 0x01 }, >> + { 120, 0x02 }, >> + { 160, 0x03 }, >> + { 200, 0x04 }, >> + { 240, 0x05 }, >> + { 280, 0x06 }, >> + { 320, 0x07 }, >> + { 360, 0x08 }, >> + { 400, 0x09 }, >> + { 600, 0x0a }, >> + { 800, 0x0b }, >> + { 1000, 0x0c }, >> + { 1200, 0x0d }, >> + { 1400, 0x0e }, >> + { 1600, 0x0f }, >> +}; >> + >> +static const struct reg_default lm3601x_regmap_defs[] = { >> + { LM3601X_ENABLE_REG, 0x20 }, >> + { LM3601X_CFG_REG, 0x15 }, >> + { LM3601X_LED_FLASH_REG, 0x00 }, >> + { LM3601X_LED_TORCH_REG, 0x00 }, >> + { LM3601X_FLAGS_REG, 0x00 }, >> + { LM3601X_DEV_ID_REG, 0x01 }, > > > Flag register is volatile and should be marked as such. No need to give > a default for that or ID, those should be read fresh. OK. We only read the FLAGS_REG anyway. > > >> +}; >> + >> +static const struct regmap_config lm3601x_regmap = { >> + .reg_bits = 8, >> + .val_bits = 8, >> + >> + .max_register = LM3601X_DEV_ID_REG, >> + .reg_defaults = lm3601x_regmap_defs, >> + .num_reg_defaults = ARRAY_SIZE(lm3601x_regmap_defs), >> + .cache_type = REGCACHE_NONE, > > > Why no caching? Remnant from debugging. I wanted to make sure the registers were actually changing. I will change this to a caching type. > > >> +}; >> + >> +static struct lm3601x_led *fled_cdev_to_led( >> + struct led_classdev_flash *fled_cdev) >> +{ >> + return container_of(fled_cdev, struct lm3601x_led, fled_cdev); >> +} >> + >> +static int lm3601x_read_faults(struct lm3601x_led *led) >> +{ >> + int flags_val; >> + int ret; >> + >> + ret = regmap_read(led->regmap, LM3601X_FLAGS_REG, &flags_val); >> + if (ret < 0) >> + return -EIO; >> + >> + led->last_flag = flags_val; >> + >> + return led->last_flag; >> +} >> + >> +static int lm3601x_torch_brightness_set(struct led_classdev *cdev, >> + enum led_brightness brightness) >> +{ >> + struct lm3601x_led *led = >> + container_of(cdev, struct lm3601x_led, cdev_torch); >> + int ret; >> + u8 brightness_val; >> + >> + mutex_lock(&led->lock); >> + >> + ret = lm3601x_read_faults(led); >> + >> + if (brightness == LED_OFF) { >> + ret = regmap_update_bits(led->regmap, LM3601X_ENABLE_REG, >> + LM3601X_MODE_TORCH, LED_OFF); >> + goto out; >> + } >> + >> + if (brightness == LED_ON) >> + brightness_val = LED_ON; >> + else >> + brightness_val = (brightness/2); >> + >> + ret = regmap_write(led->regmap, LM3601X_LED_TORCH_REG, brightness_val); >> + if (ret < 0) >> + goto out; >> + >> + ret = regmap_update_bits(led->regmap, LM3601X_ENABLE_REG, >> + LM3601X_MODE_TORCH, >> + LM3601X_MODE_TORCH); >> + >> +out: >> + mutex_unlock(&led->lock); >> + return ret; >> +} >> + >> +static int lm3601x_strobe_set(struct led_classdev_flash *fled_cdev, >> + bool state) >> +{ >> + struct lm3601x_led *led = fled_cdev_to_led(fled_cdev); >> + int ret; >> + int current_timeout; >> + int reg_count; >> + int i; >> + int timeout_reg_val = 0; >> + >> + mutex_lock(&led->lock); >> + >> + ret = regmap_read(led->regmap, LM3601X_CFG_REG, ¤t_timeout); >> + if (ret < 0) >> + goto out; >> + >> + reg_count = sizeof(strobe_timeouts) / sizeof(strobe_timeouts[0]); >> + for (i = 0; i < reg_count; i++) { >> + if (led->strobe_timeout > strobe_timeouts[i].timeout) >> + continue; >> + >> + if (led->strobe_timeout <= strobe_timeouts[i].timeout) { >> + timeout_reg_val = (strobe_timeouts[i].reg_val << 1); >> + break; >> + } >> + >> + ret = -EINVAL; >> + goto out; >> + }; >> + >> + if (led->strobe_timeout != current_timeout) >> + ret = regmap_update_bits(led->regmap, LM3601X_CFG_REG, >> + 0x1e, timeout_reg_val); >> + >> + if (state) >> + ret = regmap_update_bits(led->regmap, LM3601X_ENABLE_REG, >> + LM3601X_MODE_STROBE, >> + LM3601X_MODE_STROBE); >> + else >> + ret = regmap_update_bits(led->regmap, LM3601X_ENABLE_REG, >> + LM3601X_MODE_STROBE, LED_OFF); >> + >> + ret = lm3601x_read_faults(led); >> +out: >> + mutex_unlock(&led->lock); >> + return ret; >> +} >> + >> +static int lm3601x_strobe_brightness_set(struct led_classdev *cdev, >> + enum led_brightness brightness) >> +{ >> + struct led_classdev_flash *fled_cdev = lcdev_to_flcdev(cdev); >> + struct lm3601x_led *led = fled_cdev_to_led(fled_cdev); >> + int ret; >> + u8 brightness_val; >> + >> + mutex_lock(&led->lock); >> + ret = lm3601x_read_faults(led); >> + >> + if (brightness == LED_OFF) { >> + ret = regmap_update_bits(led->regmap, LM3601X_ENABLE_REG, >> + LM3601X_MODE_STROBE, LED_OFF); >> + goto out; >> + } >> + >> + if (brightness == LED_ON) >> + brightness_val = LED_ON; >> + else >> + brightness_val = (brightness/2); >> + >> + ret = regmap_write(led->regmap, LM3601X_LED_FLASH_REG, brightness_val); >> + >> +out: >> + mutex_unlock(&led->lock); >> + return ret; >> +} >> + >> +static int lm3601x_strobe_timeout_set(struct led_classdev_flash *fled_cdev, >> + u32 timeout) >> +{ >> + struct lm3601x_led *led = fled_cdev_to_led(fled_cdev); >> + int ret = 0; >> + >> + mutex_lock(&led->lock); >> + >> + if (timeout > led->max_strobe_timeout) >> + ret = -EINVAL; >> + else >> + led->strobe_timeout = timeout; >> + >> + mutex_unlock(&led->lock); >> + >> + return ret; >> +} >> + >> +static int lm3601x_strobe_get(struct led_classdev_flash *fled_cdev, >> + bool *state) >> +{ >> + struct lm3601x_led *led = fled_cdev_to_led(fled_cdev); >> + int ret; >> + int strobe_state; >> + >> + mutex_lock(&led->lock); >> + >> + ret = regmap_read(led->regmap, LM3601X_ENABLE_REG, &strobe_state); >> + if (ret < 0) >> + return ret; > > > Need to unlock here OK > > >> + >> + *state = strobe_state & LM3601X_MODE_STROBE; >> + >> + mutex_unlock(&led->lock); >> + >> + return ret; >> +} >> + >> +static int lm3601x_ir_brightness_set(struct led_classdev *cdev, >> + enum led_brightness brightness) >> +{ >> + struct lm3601x_led *led = >> + container_of(cdev, struct lm3601x_led, cdev_ir); >> + int ret; >> + u8 brightness_val; >> + >> + mutex_lock(&led->lock); >> + ret = lm3601x_read_faults(led); >> + >> + if (brightness == LED_OFF) { >> + ret = regmap_update_bits(led->regmap, LM3601X_ENABLE_REG, >> + 0xfe, LED_OFF); >> + goto out; >> + } >> + >> + if (brightness == LED_ON) >> + brightness_val = LED_ON; >> + else >> + brightness_val = (brightness/2); >> + >> + ret = regmap_write(led->regmap, LM3601X_LED_FLASH_REG, brightness_val); >> + > > > ret value is lost OK > > >> + ret = regmap_update_bits(led->regmap, LM3601X_ENABLE_REG, >> + LM3601X_MODE_IR_DRV, >> + LM3601X_MODE_IR_DRV); >> + >> +out: >> + mutex_unlock(&led->lock); >> + return ret; >> +} >> + >> +static int lm3601x_strobe_fault_get(struct led_classdev_flash *fled_cdev, >> + u32 *fault) >> +{ >> + struct lm3601x_led *led = fled_cdev_to_led(fled_cdev); >> + >> + lm3601x_read_faults(led); >> + >> + *fault = led->last_flag; >> + >> + return 0; >> +} >> + >> +static const struct led_flash_ops strobe_ops = { >> + .strobe_set = lm3601x_strobe_set, >> + .strobe_get = lm3601x_strobe_get, >> + .timeout_set = lm3601x_strobe_timeout_set, >> + .fault_get = lm3601x_strobe_fault_get, >> +}; >> + >> +static int lm3601x_register_leds(struct lm3601x_led *led) >> +{ >> + struct led_classdev_flash *fled_cdev; >> + struct led_classdev *led_cdev; >> + int err = -ENODEV; >> + >> + if (led->torch_node) { >> + led->cdev_torch.name = led->torch; >> + led->cdev_torch.max_brightness = LED_FULL; >> + led->cdev_torch.brightness_set_blocking = lm3601x_torch_brightness_set; >> + err = devm_led_classdev_register(&led->client->dev, >> + &led->cdev_torch); >> + if (err < 0) >> + goto class_reg_err; >> + } >> + >> + if (led->strobe_node) { >> + fled_cdev = &led->fled_cdev; >> + fled_cdev->ops = &strobe_ops; >> + >> + led_cdev = &fled_cdev->led_cdev; >> + led_cdev->name = led->strobe; >> + led_cdev->max_brightness = LED_FULL; >> + led_cdev->brightness_set_blocking = lm3601x_strobe_brightness_set; >> + led_cdev->flags |= LED_DEV_CAP_FLASH; >> + >> + err = led_classdev_flash_register(&led->client->dev, >> + fled_cdev); >> + if (err < 0) >> + goto class_reg_err; >> + } >> + >> + if (led->ir_node) { >> + led->cdev_ir.name = led->ir; >> + led->cdev_ir.max_brightness = LED_FULL; >> + led->cdev_ir.brightness_set_blocking = >> + lm3601x_ir_brightness_set; >> + >> + err = devm_led_classdev_register(&led->client->dev, >> + &led->cdev_ir); >> + } >> + >> +class_reg_err: >> + return err; > > > Why do you need this label, just return from where it is called Its a remnant from development I can remove it > > >> +} >> + >> +static void lm3601x_init_flash_timeout(struct lm3601x_led *led) >> +{ >> + struct led_flash_setting *setting; >> + >> + setting = &led->fled_cdev.timeout; >> + setting->min = strobe_timeouts[0].timeout; >> + setting->max = led->max_strobe_timeout; >> + setting->step = 40; >> + setting->val = led->max_strobe_timeout; >> +} >> + >> +static int lm3601x_parse_node(struct lm3601x_led *led, >> + struct device_node *node) >> +{ >> + struct device_node *child_node; >> + const char *name; >> + int ret = -ENODEV; >> + >> + for_each_available_child_of_node(node, child_node) { >> + u32 id = 0; >> + >> + of_property_read_u32(child_node, "reg", &id); >> + >> + switch (id) { >> + case LM3601X_LED_TORCH: >> + led->torch_node = of_node_get(child_node); >> + break; >> + case LM3601X_LED_STROBE: >> + led->strobe_node = of_node_get(child_node); >> + break; >> + case LM3601X_LED_IR: >> + led->ir_node = of_node_get(child_node); >> + break; >> + default: >> + dev_warn(&led->client->dev, >> + "unknown LED %u encountered, ignoring\n", id); >> + break; >> + } >> + } >> + >> + if (led->torch_node) { >> + ret = of_property_read_string(led->torch_node, "label", &name); >> + if (!ret) >> + snprintf(led->torch, sizeof(led->torch), >> + "%s:%s", led->torch_node->name, name); >> + else >> + snprintf(led->torch, sizeof(led->torch), >> + "%s:torch", led->torch_node->name); >> + ret = of_property_read_u32(led->torch_node, "led-max-microamp", >> + &led->torch_current_max); >> + if (ret < 0) { >> + led->torch_current_max = LM3601X_MIN_TORCH_I_UA; >> + dev_warn(&led->client->dev, >> + "led-max-microamp DT property missing\n"); >> + } >> + } >> + >> + if (led->strobe_node) { >> + ret = of_property_read_string(led->strobe_node, "label", &name); >> + if (!ret) >> + snprintf(led->strobe, sizeof(led->strobe), >> + "%s:%s", led->strobe_node->name, name); >> + else >> + snprintf(led->strobe, sizeof(led->strobe), >> + "%s::strobe", led->strobe_node->name); >> + >> + ret = of_property_read_u32(led->strobe_node, >> + "flash-max-microamp", >> + &led->strobe_current_max); >> + if (ret < 0) { >> + led->strobe_current_max = LM3601X_MIN_STROBE_I_MA; >> + dev_warn(&led->client->dev, >> + "flash-max-microamp DT property missing\n"); >> + } >> + >> + ret = of_property_read_u32(led->strobe_node, >> + "flash-max-timeout-us", >> + &led->max_strobe_timeout); >> + if (ret < 0) { >> + led->max_strobe_timeout = strobe_timeouts[0].reg_val; >> + dev_warn(&led->client->dev, >> + "flash-max-timeout-us DT property missing\n"); >> + } >> + >> + lm3601x_init_flash_timeout(led); >> + >> + } >> + >> + if (led->ir_node) { >> + ret = of_property_read_string(led->ir_node, "label", &name); >> + if (!ret) >> + snprintf(led->ir, sizeof(led->ir), >> + "%s:%s", led->ir_node->name, name); >> + else >> + snprintf(led->ir, sizeof(led->ir), >> + "%s::infrared", led->ir_node->name); >> + } >> + >> + return ret; >> +} >> + >> +static int lm3601x_probe(struct i2c_client *client, >> + const struct i2c_device_id *id) >> +{ >> + struct lm3601x_led *led; >> + int err; >> + >> + led = devm_kzalloc(&client->dev, >> + sizeof(struct lm3601x_led), GFP_KERNEL); >> + if (!led) >> + return -ENOMEM; >> + >> + err = lm3601x_parse_node(led, client->dev.of_node); >> + if (err < 0) >> + return -ENODEV; >> + >> + led->client = client; >> + led->regmap = devm_regmap_init_i2c(client, &lm3601x_regmap); >> + if (IS_ERR(led->regmap)) { >> + err = PTR_ERR(led->regmap); >> + dev_err(&client->dev, >> + "Failed to allocate register map: %d\n", err); >> + return err; >> + } >> + >> + mutex_init(&led->lock); >> + i2c_set_clientdata(client, led); >> + err = lm3601x_register_leds(led); >> + >> + return err; >> +} >> + >> +static int lm3601x_remove(struct i2c_client *client) >> +{ >> + struct lm3601x_led *led = i2c_get_clientdata(client); >> + >> + regmap_write(led->regmap, LM3601X_ENABLE_REG, 0); >> + >> + return 0; >> +} >> + >> +static const struct i2c_device_id lm3601x_id[] = { >> + {"LM36010", CHIP_LM36010}, >> + {"LM36011", CHIP_LM36011}, >> + {} >> +}; >> +MODULE_DEVICE_TABLE(i2c, lm3601x_id); >> + >> +static const struct of_device_id of_lm3601x_leds_match[] = { >> + { .compatible = "ti,lm3601x", }, >> + { .compatible = "ti,lm36010", }, >> + { .compatible = "ti,lm36011", }, >> + {}, >> +}; >> +MODULE_DEVICE_TABLE(of, of_lm3601x_leds_match); >> + >> +static struct i2c_driver lm3601x_i2c_driver = { >> + .driver = { >> + .name = "lm3601x", >> + .of_match_table = of_lm3601x_leds_match, >> + }, >> + .probe = lm3601x_probe, >> + .remove = lm3601x_remove, >> + .id_table = lm3601x_id, >> +}; >> +module_i2c_driver(lm3601x_i2c_driver); >> + >> +MODULE_DESCRIPTION("Texas Instruments Flash Lighting driver for LM3601X"); >> +MODULE_AUTHOR("Dan Murphy <dmurphy@ti.com>"); >> +MODULE_LICENSE("GPL v2"); >>
On 05/08/2018 10:32 AM, Andrew F. Davis wrote: > On 05/08/2018 09:17 AM, Dan Murphy wrote: >> Introduce the device tree bindings for the lm3601x >> family of LED torch, flash and IR drivers. >> >> Signed-off-by: Dan Murphy <dmurphy@ti.com> >> --- >> >> v2 - No changes - https://patchwork.kernel.org/patch/10384587/ >> >> .../devicetree/bindings/leds/leds-lm3601x.txt | 51 +++++++++++++++++++ >> 1 file changed, 51 insertions(+) >> create mode 100644 Documentation/devicetree/bindings/leds/leds-lm3601x.txt >> >> diff --git a/Documentation/devicetree/bindings/leds/leds-lm3601x.txt b/Documentation/devicetree/bindings/leds/leds-lm3601x.txt >> new file mode 100644 >> index 000000000000..38cdabf6ca7e >> --- /dev/null >> +++ b/Documentation/devicetree/bindings/leds/leds-lm3601x.txt >> @@ -0,0 +1,51 @@ >> +* Texas Instruments - lm3601x Single-LED Flash Driver >> + >> +The LM3601X are ultra-small LED flash drivers that >> +provides a high level of adjustability. >> + >> +Required properties: >> + - compatible : Can be one of the following >> + "ti,lm3601x" > > > No wildcard compatibles, drop this. Yeah I hmm and hawed about keeping this so I figured I would get community feedback on this. I can remove it. > > >> + "ti,lm36010" >> + "ti,lm36011" >> + - reg : I2C slave address >> + - #address-cells : 1 >> + - #size-cells : 0 >> + >> +Required child properties: >> + - reg : 0 - Indicates to support and register a torch interface >> + 1 - Indicates to support and register a strobe interface >> + 2 - Indicates to support and register an ir interface >> + >> +Optional child properties: >> + - label : see Documentation/devicetree/bindings/leds/common.txt >> + > > > Relative path might work better here. I was following the other LED documentation. Pretty much a copy and paste > > >> +Example: >> +led-controller@64 { >> + compatible = "ti,lm3601x"; >> + #address-cells = <1>; >> + #size-cells = <0>; >> + reg = <0x64>; >> + >> + led@0 { >> + reg = <0>; >> + label = "white:torch"; >> + led-max-microamp=<10000>; >> + }; >> + >> + led@1 { >> + reg = <1>; >> + label = "white:strobe"; >> + flash-max-microamp=<10000>; >> + flash-max-timeout-us=<800>; >> + }; >> + >> + led@2 { >> + reg = <2>; >> + label = "invisible:ir"; >> + }; >> +} >> + >> +For more product information please see the links below: >> +http://www.ti.com/product/LM36010 >> +http://www.ti.com/product/LM36011 >>
On Tue 2018-05-08 09:17:03, Dan Murphy wrote: > Introduce the device tree bindings for the lm3601x > family of LED torch, flash and IR drivers. > > Signed-off-by: Dan Murphy <dmurphy@ti.com> > --- > > v2 - No changes - https://patchwork.kernel.org/patch/10384587/ > > .../devicetree/bindings/leds/leds-lm3601x.txt | 51 +++++++++++++++++++ > 1 file changed, 51 insertions(+) > create mode 100644 Documentation/devicetree/bindings/leds/leds-lm3601x.txt > > diff --git a/Documentation/devicetree/bindings/leds/leds-lm3601x.txt b/Documentation/devicetree/bindings/leds/leds-lm3601x.txt > new file mode 100644 > index 000000000000..38cdabf6ca7e > --- /dev/null > +++ b/Documentation/devicetree/bindings/leds/leds-lm3601x.txt > @@ -0,0 +1,51 @@ > +* Texas Instruments - lm3601x Single-LED Flash Driver > + > +The LM3601X are ultra-small LED flash drivers that > +provides a high level of adjustability. "provide". > +Required properties: > + - compatible : Can be one of the following > + "ti,lm3601x" > + "ti,lm36010" > + "ti,lm36011" > + - reg : I2C slave address > + - #address-cells : 1 > + - #size-cells : 0 > + > +Required child properties: > + - reg : 0 - Indicates to support and register a torch interface > + 1 - Indicates to support and register a strobe interface > + 2 - Indicates to support and register an ir interface I'd delete "to support and register" -- we are describing hardware here. > +Optional child properties: > + - label : see Documentation/devicetree/bindings/leds/common.txt > + > +Example: > +led-controller@64 { > + compatible = "ti,lm3601x"; > + #address-cells = <1>; > + #size-cells = <0>; > + reg = <0x64>; > + > + led@0 { > + reg = <0>; > + label = "white:torch"; > + led-max-microamp=<10000>; > + }; > + > + led@1 { > + reg = <1>; > + label = "white:strobe"; > + flash-max-microamp=<10000>; > + flash-max-timeout-us=<800>; > + }; > + > + led@2 { > + reg = <2>; > + label = "invisible:ir"; > + }; > +} Title says this is single-LED driver chip, but it controls three chips in this example? I'd put " " around "=" for consistency. We use "flash" elsewhere, I'd replace "strobe" with that. Userspace would like consistency, too. What is the IR led good for? Taking videos in the dark? I guess for consistency, it is "ir:torch" :-). Pavel
Pavel Thanks for the review On 05/10/2018 06:28 AM, Pavel Machek wrote: > On Tue 2018-05-08 09:17:03, Dan Murphy wrote: >> Introduce the device tree bindings for the lm3601x >> family of LED torch, flash and IR drivers. >> >> Signed-off-by: Dan Murphy <dmurphy@ti.com> >> --- >> >> v2 - No changes - https://patchwork.kernel.org/patch/10384587/ >> >> .../devicetree/bindings/leds/leds-lm3601x.txt | 51 +++++++++++++++++++ >> 1 file changed, 51 insertions(+) >> create mode 100644 Documentation/devicetree/bindings/leds/leds-lm3601x.txt >> >> diff --git a/Documentation/devicetree/bindings/leds/leds-lm3601x.txt b/Documentation/devicetree/bindings/leds/leds-lm3601x.txt >> new file mode 100644 >> index 000000000000..38cdabf6ca7e >> --- /dev/null >> +++ b/Documentation/devicetree/bindings/leds/leds-lm3601x.txt >> @@ -0,0 +1,51 @@ >> +* Texas Instruments - lm3601x Single-LED Flash Driver >> + >> +The LM3601X are ultra-small LED flash drivers that >> +provides a high level of adjustability. > > "provide". Data sheet says provides. It reads fine either way but I will change it. > >> +Required properties: >> + - compatible : Can be one of the following >> + "ti,lm3601x" >> + "ti,lm36010" >> + "ti,lm36011" >> + - reg : I2C slave address >> + - #address-cells : 1 >> + - #size-cells : 0 >> + >> +Required child properties: >> + - reg : 0 - Indicates to support and register a torch interface >> + 1 - Indicates to support and register a strobe interface >> + 2 - Indicates to support and register an ir interface > > I'd delete "to support and register" -- we are describing hardware here. OK > >> +Optional child properties: >> + - label : see Documentation/devicetree/bindings/leds/common.txt >> + >> +Example: >> +led-controller@64 { >> + compatible = "ti,lm3601x"; >> + #address-cells = <1>; >> + #size-cells = <0>; >> + reg = <0x64>; >> + >> + led@0 { >> + reg = <0>; >> + label = "white:torch"; >> + led-max-microamp=<10000>; >> + }; >> + >> + led@1 { >> + reg = <1>; >> + label = "white:strobe"; >> + flash-max-microamp=<10000>; >> + flash-max-timeout-us=<800>; >> + }; >> + >> + led@2 { >> + reg = <2>; >> + label = "invisible:ir"; >> + }; >> +} > > Title says this is single-LED driver chip, but it controls three chips > in this example? 3 chips? It technically controls 3 LED methods and only 2 LEDs. The torch can be used as the strobe and the IR is controlled independently. > > I'd put " " around "=" for consistency. OK > > We use "flash" elsewhere, I'd replace "strobe" with that. Userspace > would like consistency, too. Labels are meant to be examples only not absolutes. I will change it to say flash but the label can be anything the customer wants it to be. > > What is the IR led good for? Taking videos in the dark? Yes. That is one application. And hunting ghosts ;) > > I guess for consistency, it is "ir:torch" :-). OK > > Pavel >
diff --git a/Documentation/devicetree/bindings/leds/leds-lm3601x.txt b/Documentation/devicetree/bindings/leds/leds-lm3601x.txt new file mode 100644 index 000000000000..38cdabf6ca7e --- /dev/null +++ b/Documentation/devicetree/bindings/leds/leds-lm3601x.txt @@ -0,0 +1,51 @@ +* Texas Instruments - lm3601x Single-LED Flash Driver + +The LM3601X are ultra-small LED flash drivers that +provides a high level of adjustability. + +Required properties: + - compatible : Can be one of the following + "ti,lm3601x" + "ti,lm36010" + "ti,lm36011" + - reg : I2C slave address + - #address-cells : 1 + - #size-cells : 0 + +Required child properties: + - reg : 0 - Indicates to support and register a torch interface + 1 - Indicates to support and register a strobe interface + 2 - Indicates to support and register an ir interface + +Optional child properties: + - label : see Documentation/devicetree/bindings/leds/common.txt + +Example: +led-controller@64 { + compatible = "ti,lm3601x"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x64>; + + led@0 { + reg = <0>; + label = "white:torch"; + led-max-microamp=<10000>; + }; + + led@1 { + reg = <1>; + label = "white:strobe"; + flash-max-microamp=<10000>; + flash-max-timeout-us=<800>; + }; + + led@2 { + reg = <2>; + label = "invisible:ir"; + }; +} + +For more product information please see the links below: +http://www.ti.com/product/LM36010 +http://www.ti.com/product/LM36011
Introduce the device tree bindings for the lm3601x family of LED torch, flash and IR drivers. Signed-off-by: Dan Murphy <dmurphy@ti.com> --- v2 - No changes - https://patchwork.kernel.org/patch/10384587/ .../devicetree/bindings/leds/leds-lm3601x.txt | 51 +++++++++++++++++++ 1 file changed, 51 insertions(+) create mode 100644 Documentation/devicetree/bindings/leds/leds-lm3601x.txt