| Message ID | 20180501120820.11016-6-srinivas.kandagatla@linaro.org |
|---|---|
| State | Not Applicable, archived |
| Headers | show |
| Series | ASoC: qcom: Add support to QDSP based Audio | expand |
On 5/1/2018 5:08 AM, Srinivas Kandagatla wrote: > This patch add DT bindings for ADM (Audio Device Manager) DSP module. > This module implements mixer controls to setup the connections between > AFE ports and ASM streams. > > Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> > Reviewed-and-tested-by: Rohit kumar <rohitkr@codeaurora.org> > Reviewed-by: Rob Herring <robh@kernel.org> > --- > .../devicetree/bindings/sound/qcom,q6adm.txt | 33 ++++++++++++++++++++++ > 1 file changed, 33 insertions(+) > create mode 100644 Documentation/devicetree/bindings/sound/qcom,q6adm.txt > > diff --git a/Documentation/devicetree/bindings/sound/qcom,q6adm.txt b/Documentation/devicetree/bindings/sound/qcom,q6adm.txt > new file mode 100644 > index 000000000000..cb709e5dbc44 > --- /dev/null > +++ b/Documentation/devicetree/bindings/sound/qcom,q6adm.txt > @@ -0,0 +1,33 @@ > +Qualcomm Audio Device Manager (Q6ADM) binding > + > +Q6ADM is one of the APR audio service on Q6DSP. > +Please refer to qcom,apr.txt for details of the coommon apr service bindings Correct "coommon" to "common". Otherwise looks good. Reviewed-by: Banajit Goswami <bgoswami@codeaurora.org>
diff --git a/Documentation/devicetree/bindings/sound/qcom,q6adm.txt b/Documentation/devicetree/bindings/sound/qcom,q6adm.txt new file mode 100644 index 000000000000..cb709e5dbc44 --- /dev/null +++ b/Documentation/devicetree/bindings/sound/qcom,q6adm.txt @@ -0,0 +1,33 @@ +Qualcomm Audio Device Manager (Q6ADM) binding + +Q6ADM is one of the APR audio service on Q6DSP. +Please refer to qcom,apr.txt for details of the coommon apr service bindings +used by the apr service device. + +- but must contain the following property: + +- compatible: + Usage: required + Value type: <stringlist> + Definition: must be "qcom,q6adm-v<MAJOR-NUMBER>.<MINOR-NUMBER>". + Or "qcom,q6adm" where the version number can be queried + from DSP. + example "qcom,q6adm-v2.0" + + += ADM routing +"routing" subnode of the ADM node represents adm routing specific configuration + +- #sound-dai-cells + Usage: required + Value type: <u32> + Definition: Must be 0 + += EXAMPLE +q6adm@8 { + compatible = "qcom,q6adm"; + reg = <APR_SVC_ADM>; + q6routing: routing { + #sound-dai-cells = <0>; + }; +};