| Message ID | 20171123225906.31838-3-lorenzo.bianconi83@gmail.com |
|---|---|
| State | Not Applicable, archived |
| Headers | show |
| Series | Add support for UVIS25 uv sensor | expand |
On Thu, 23 Nov 2017 23:59:06 +0100 Lorenzo Bianconi <lorenzo.bianconi83@gmail.com> wrote: > Acked-by: Rob Herring <robh@kernel.org> > Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi83@gmail.com> Applied > --- > .../devicetree/bindings/iio/light/uvis25.txt | 23 ++++++++++++++++++++++ > 1 file changed, 23 insertions(+) > create mode 100644 Documentation/devicetree/bindings/iio/light/uvis25.txt > > diff --git a/Documentation/devicetree/bindings/iio/light/uvis25.txt b/Documentation/devicetree/bindings/iio/light/uvis25.txt > new file mode 100644 > index 000000000000..3041207e3f3c > --- /dev/null > +++ b/Documentation/devicetree/bindings/iio/light/uvis25.txt > @@ -0,0 +1,23 @@ > +* ST UVIS25 uv sensor > + > +Required properties: > +- compatible: should be "st,uvis25" > +- reg: i2c address of the sensor / spi cs line > + > +Optional properties: > +- interrupt-parent: should be the phandle for the interrupt controller > +- interrupts: interrupt mapping for IRQ. It should be configured with > + flags IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_EDGE_RISING, IRQ_TYPE_LEVEL_LOW or > + IRQ_TYPE_EDGE_FALLING. > + > + Refer to interrupt-controller/interrupts.txt for generic interrupt > + client node bindings. > + > +Example: > + > +uvis25@47 { > + compatible = "st,uvis25"; > + reg = <0x47>; > + interrupt-parent = <&gpio0>; > + interrupts = <0 IRQ_TYPE_EDGE_RISING>; > +}; -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/Documentation/devicetree/bindings/iio/light/uvis25.txt b/Documentation/devicetree/bindings/iio/light/uvis25.txt new file mode 100644 index 000000000000..3041207e3f3c --- /dev/null +++ b/Documentation/devicetree/bindings/iio/light/uvis25.txt @@ -0,0 +1,23 @@ +* ST UVIS25 uv sensor + +Required properties: +- compatible: should be "st,uvis25" +- reg: i2c address of the sensor / spi cs line + +Optional properties: +- interrupt-parent: should be the phandle for the interrupt controller +- interrupts: interrupt mapping for IRQ. It should be configured with + flags IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_EDGE_RISING, IRQ_TYPE_LEVEL_LOW or + IRQ_TYPE_EDGE_FALLING. + + Refer to interrupt-controller/interrupts.txt for generic interrupt + client node bindings. + +Example: + +uvis25@47 { + compatible = "st,uvis25"; + reg = <0x47>; + interrupt-parent = <&gpio0>; + interrupts = <0 IRQ_TYPE_EDGE_RISING>; +};