diff mbox

[v4,4/6] regulator: pfuze100: add fsl, pmic-stby-poweroff property

Message ID 20170609140739.15726-5-o.rempel@pengutronix.de
State Not Applicable, archived
Headers show

Commit Message

Oleksij Rempel June 9, 2017, 2:07 p.m. UTC
Document the new optional "fsl,pmic-stby-poweroff" property.

Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
---
 Documentation/devicetree/bindings/regulator/pfuze100.txt | 7 +++++++
 1 file changed, 7 insertions(+)

Comments

Rob Herring (Arm) June 18, 2017, 2:04 p.m. UTC | #1
On Fri, Jun 09, 2017 at 04:07:37PM +0200, Oleksij Rempel wrote:
> Document the new optional "fsl,pmic-stby-poweroff" property.
> 
> Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
> ---
>  Documentation/devicetree/bindings/regulator/pfuze100.txt | 7 +++++++
>  1 file changed, 7 insertions(+)

Acked-by: Rob Herring <robh@kernel.org>
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
diff mbox

Patch

diff --git a/Documentation/devicetree/bindings/regulator/pfuze100.txt b/Documentation/devicetree/bindings/regulator/pfuze100.txt
index 444c47831a40..197f1a52e960 100644
--- a/Documentation/devicetree/bindings/regulator/pfuze100.txt
+++ b/Documentation/devicetree/bindings/regulator/pfuze100.txt
@@ -4,6 +4,13 @@  Required properties:
 - compatible: "fsl,pfuze100", "fsl,pfuze200", "fsl,pfuze3000"
 - reg: I2C slave address
 
+Optional properties:
+- fsl,pmic-stby-poweroff: if present, configure the PMIC to shutdown all
+  power rails when PMIC_STBY_REQ line is asserted during the power off sequence.
+  Use this option if the SoC should be powered off by external power
+  management IC (PMIC) on PMIC_STBY_REQ signal.
+  As opposite to PMIC_STBY_REQ boards can implement PMIC_ON_REQ signal.
+
 Required child node:
 - regulators: This is the list of child nodes that specify the regulator
   initialization data for defined regulators. Please refer to below doc