| Message ID | 20170324033842.12541-1-tony@atomide.com |
|---|---|
| State | Not Applicable, archived |
| Headers | show |
On 24/03/17 03:38, Tony Lindgren wrote: > On Motorola phones like droid 4 there is a custom CPCAP PMIC. This PMIC > has ADCs that are used for battery charging and USB PHY VBUS and ID pin > detection. > > Unfortunately the only documentation for this ADC seems to be the > Motorola mapphone Linux kernel tree. I have tested that reading raw and > scaled values works, but I have not used the timed sampling that the ADC > seems to support. > > Let's add a minimal support for it so we can eventually provide IIO > channels for the related battery charging and USB PHY drivers. > > Cc: devicetree@vger.kernel.org > Cc: Marcel Partap <mpartap@gmx.net> > Cc: Michael Scott <michael.scott@linaro.org> > Cc: Sebastian Reichel <sre@kernel.org> > Signed-off-by: Tony Lindgren <tony@atomide.com> Looks good to me. It's complex enough that we should let it sit for a few more days though to see if anyone else picks up on anything. If it looks like I've dropped this after say two weeks, do poke me as I've been known to lose drivers from time to time! Jonathan > --- > > Changes since v2: > > - Simplify things further by using channel based indexing and > remove more drivers specific enumerations > > Changes since v1: > > - Fix numerous issues pointed out by Peter Meerwald-Stadler > <pmeerw@pmeerw.net> and Jonathan Cameron <jic23@kernel.org> > > - Simplify things further by limiting read functions to a > single channel instead of a bank and got rid of the driver > specific cpcap_adc_conv_type in favor of IIO generic types > > --- > .../devicetree/bindings/iio/adc/cpcap-adc.txt | 18 + > drivers/iio/adc/Kconfig | 11 + > drivers/iio/adc/Makefile | 1 + > drivers/iio/adc/cpcap-adc.c | 1007 ++++++++++++++++++++ > 4 files changed, 1037 insertions(+) > create mode 100644 Documentation/devicetree/bindings/iio/adc/cpcap-adc.txt > create mode 100644 drivers/iio/adc/cpcap-adc.c > > diff --git a/Documentation/devicetree/bindings/iio/adc/cpcap-adc.txt b/Documentation/devicetree/bindings/iio/adc/cpcap-adc.txt > new file mode 100644 > --- /dev/null > +++ b/Documentation/devicetree/bindings/iio/adc/cpcap-adc.txt > @@ -0,0 +1,18 @@ > +Motorola CPCAP PMIC ADC binding > + > +Required properties: > +- compatible: Should be "motorola,cpcap-adc" or "motorola,mapphone-cpcap-adc" > +- interrupt-parent: The interrupt controller > +- interrupts: The interrupt number for the ADC device > +- interrupt-names: Should be "adcdone" > +- #io-channel-cells: Number of cells in an IIO specifier > + > +Example: > + > +cpcap_adc: adc { > + compatible = "motorola,mapphone-cpcap-adc"; > + interrupt-parent = <&cpcap>; > + interrupts = <8 IRQ_TYPE_NONE>; > + interrupt-names = "adcdone"; > + #io-channel-cells = <1>; > +}; > diff --git a/drivers/iio/adc/Kconfig b/drivers/iio/adc/Kconfig > --- a/drivers/iio/adc/Kconfig > +++ b/drivers/iio/adc/Kconfig > @@ -195,6 +195,17 @@ config CC10001_ADC > This driver can also be built as a module. If so, the module will be > called cc10001_adc. > > +config CPCAP_ADC > + tristate "Motorola CPCAP PMIC ADC driver" > + depends on MFD_CPCAP > + select IIO_BUFFER > + select IIO_TRIGGERED_BUFFER > + help > + Say yes here to build support for Motorola CPCAP PMIC ADC. > + > + This driver can also be built as a module. If so, the module will be > + called cpcap-adc. > + > config DA9150_GPADC > tristate "Dialog DA9150 GPADC driver support" > depends on MFD_DA9150 > diff --git a/drivers/iio/adc/Makefile b/drivers/iio/adc/Makefile > --- a/drivers/iio/adc/Makefile > +++ b/drivers/iio/adc/Makefile > @@ -20,6 +20,7 @@ obj-$(CONFIG_AXP288_ADC) += axp288_adc.o > obj-$(CONFIG_BCM_IPROC_ADC) += bcm_iproc_adc.o > obj-$(CONFIG_BERLIN2_ADC) += berlin2-adc.o > obj-$(CONFIG_CC10001_ADC) += cc10001_adc.o > +obj-$(CONFIG_CPCAP_ADC) += cpcap-adc.o > obj-$(CONFIG_DA9150_GPADC) += da9150-gpadc.o > obj-$(CONFIG_ENVELOPE_DETECTOR) += envelope-detector.o > obj-$(CONFIG_EXYNOS_ADC) += exynos_adc.o > diff --git a/drivers/iio/adc/cpcap-adc.c b/drivers/iio/adc/cpcap-adc.c > new file mode 100644 > --- /dev/null > +++ b/drivers/iio/adc/cpcap-adc.c > @@ -0,0 +1,1007 @@ > +/* > + * Copyright (C) 2017 Tony Lindgren <tony@atomide.com> > + * > + * Rewritten for Linux IIO framework with some code based on > + * earlier driver found in the Motorola Linux kernel: > + * > + * Copyright (C) 2009-2010 Motorola, Inc. > + * > + * This program is free software; you can redistribute it and/or modify > + * it under the terms of the GNU General Public License version 2 as > + * published by the Free Software Foundation. > + * > + * This program is distributed in the hope that it will be useful, > + * but WITHOUT ANY WARRANTY; without even the implied warranty of > + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the > + * GNU General Public License for more details. > + */ > + > +#include <linux/delay.h> > +#include <linux/device.h> > +#include <linux/err.h> > +#include <linux/init.h> > +#include <linux/interrupt.h> > +#include <linux/kernel.h> > +#include <linux/module.h> > +#include <linux/of.h> > +#include <linux/of_platform.h> > +#include <linux/platform_device.h> > +#include <linux/regmap.h> > + > +#include <linux/iio/buffer.h> > +#include <linux/iio/driver.h> > +#include <linux/iio/iio.h> > +#include <linux/iio/kfifo_buf.h> > +#include <linux/mfd/motorola-cpcap.h> > + > +/* Register CPCAP_REG_ADCC1 bits */ > +#define CPCAP_BIT_ADEN_AUTO_CLR BIT(15) /* Currently unused */ > +#define CPCAP_BIT_CAL_MODE BIT(14) /* Set with BIT_RAND0 */ > +#define CPCAP_BIT_ADC_CLK_SEL1 BIT(13) /* Currently unused */ > +#define CPCAP_BIT_ADC_CLK_SEL0 BIT(12) /* Currently unused */ > +#define CPCAP_BIT_ATOX BIT(11) > +#define CPCAP_BIT_ATO3 BIT(10) > +#define CPCAP_BIT_ATO2 BIT(9) > +#define CPCAP_BIT_ATO1 BIT(8) > +#define CPCAP_BIT_ATO0 BIT(7) > +#define CPCAP_BIT_ADA2 BIT(6) > +#define CPCAP_BIT_ADA1 BIT(5) > +#define CPCAP_BIT_ADA0 BIT(4) > +#define CPCAP_BIT_AD_SEL1 BIT(3) /* Set for bank1 */ > +#define CPCAP_BIT_RAND1 BIT(2) /* Set for channel 16 & 17 */ > +#define CPCAP_BIT_RAND0 BIT(1) /* Set with CAL_MODE */ > +#define CPCAP_BIT_ADEN BIT(0) /* Currently unused */ > + > +/* Register CPCAP_REG_ADCC2 bits */ > +#define CPCAP_BIT_CAL_FACTOR_ENABLE BIT(15) /* Currently unused */ > +#define CPCAP_BIT_BATDETB_EN BIT(14) /* Currently unused */ > +#define CPCAP_BIT_ADTRIG_ONESHOT BIT(13) /* Set for !TIMING_IMM */ > +#define CPCAP_BIT_ASC BIT(12) /* Set for TIMING_IMM */ > +#define CPCAP_BIT_ATOX_PS_FACTOR BIT(11) > +#define CPCAP_BIT_ADC_PS_FACTOR1 BIT(10) > +#define CPCAP_BIT_ADC_PS_FACTOR0 BIT(9) > +#define CPCAP_BIT_AD4_SELECT BIT(8) /* Currently unused */ > +#define CPCAP_BIT_ADC_BUSY BIT(7) /* Currently unused */ > +#define CPCAP_BIT_THERMBIAS_EN BIT(6) /* Currently unused */ > +#define CPCAP_BIT_ADTRIG_DIS BIT(5) /* Disable interrupt */ > +#define CPCAP_BIT_LIADC BIT(4) /* Currently unused */ > +#define CPCAP_BIT_TS_REFEN BIT(3) /* Currently unused */ > +#define CPCAP_BIT_TS_M2 BIT(2) /* Currently unused */ > +#define CPCAP_BIT_TS_M1 BIT(1) /* Currently unused */ > +#define CPCAP_BIT_TS_M0 BIT(0) /* Currently unused */ > + > +#define CPCAP_MAX_TEMP_LVL 27 > +#define CPCAP_FOUR_POINT_TWO_ADC 801 > +#define ST_ADC_CAL_CHRGI_HIGH_THRESHOLD 530 > +#define ST_ADC_CAL_CHRGI_LOW_THRESHOLD 494 > +#define ST_ADC_CAL_BATTI_HIGH_THRESHOLD 530 > +#define ST_ADC_CAL_BATTI_LOW_THRESHOLD 494 > +#define ST_ADC_CALIBRATE_DIFF_THRESHOLD 3 > + > +#define CPCAP_ADC_MAX_RETRIES 5 /* Calibration and quirk */ > + > +/** > + * struct cpcap_adc_ato - timing settings for cpcap adc > + * > + * Unfortunately no cpcap documentation available, please document when > + * using these. > + */ > +struct cpcap_adc_ato { > + unsigned short ato_in; > + unsigned short atox_in; > + unsigned short adc_ps_factor_in; > + unsigned short atox_ps_factor_in; > + unsigned short ato_out; > + unsigned short atox_out; > + unsigned short adc_ps_factor_out; > + unsigned short atox_ps_factor_out; > +}; > + > +/** > + * struct cpcap-adc - cpcap adc device driver data > + * @reg: cpcap regmap > + * @dev: struct device > + * @vendor: cpcap vendor > + * @irq: interrupt > + * @lock: mutex > + * @ato: request timings > + * @wq_data_avail: work queue > + * @done: work done > + */ > +struct cpcap_adc { > + struct regmap *reg; > + struct device *dev; > + u16 vendor; > + int irq; > + struct mutex lock; /* ADC register access lock */ > + const struct cpcap_adc_ato *ato; > + wait_queue_head_t wq_data_avail; > + bool done; > +}; > + > +/** > + * enum cpcap_adc_channel - cpcap adc channels > + */ > +enum cpcap_adc_channel { > + /* Bank0 channels */ > + CPCAP_ADC_AD0_BATTDETB, /* Battery detection */ > + CPCAP_ADC_BATTP, /* Battery voltage */ > + CPCAP_ADC_VBUS, /* USB VBUS voltage */ > + CPCAP_ADC_AD3, /* Battery temperature when charging */ > + CPCAP_ADC_BPLUS_AD4, /* Another battery or system voltage */ > + CPCAP_ADC_CHG_ISENSE, /* Calibrated charge current */ > + CPCAP_ADC_BATTI, /* Calibrated system current */ > + CPCAP_ADC_USB_ID, /* USB OTG ID, unused on droid 4? */ > + > + /* Bank1 channels */ > + CPCAP_ADC_AD8, /* Seems unused */ > + CPCAP_ADC_AD9, /* Seems unused */ > + CPCAP_ADC_LICELL, /* Maybe system voltage? Always 3V */ > + CPCAP_ADC_HV_BATTP, /* Another battery detection? */ > + CPCAP_ADC_TSX1_AD12, /* Seems unused, for touchscreen? */ > + CPCAP_ADC_TSX2_AD13, /* Seems unused, for touchscreen? */ > + CPCAP_ADC_TSY1_AD14, /* Seems unused, for touchscreen? */ > + CPCAP_ADC_TSY2_AD15, /* Seems unused, for touchscreen? */ > + > + /* Remuxed channels using bank0 entries */ > + CPCAP_ADC_BATTP_PI16, /* Alternative mux mode for BATTP */ > + CPCAP_ADC_BATTI_PI17, /* Alternative mux mode for BATTI */ > + > + CPCAP_ADC_CHANNEL_NUM, > +}; > + > +/** > + * enum cpcap_adc_timing - cpcap adc timing options > + * > + * CPCAP_ADC_TIMING_IMM seems to be immediate with no timings. > + * Please document when using. > + */ > +enum cpcap_adc_timing { > + CPCAP_ADC_TIMING_IMM, > + CPCAP_ADC_TIMING_IN, > + CPCAP_ADC_TIMING_OUT, > +}; > + > +/** > + * struct cpcap_adc_phasing_tbl - cpcap phasing table > + * @offset: offset in the phasing table > + * @multiplier: multiplier in the phasing table > + * @divider: divider in the phasing table > + * @min: minimum value > + * @max: maximum value > + */ > +struct cpcap_adc_phasing_tbl { > + short offset; > + unsigned short multiplier; > + unsigned short divider; > + short min; > + short max; > +}; > + > +/** > + * struct cpcap_adc_conversion_tbl - cpcap conversion table > + * @conv_type: conversion type > + * @align_offset: align offset > + * @conv_offset: conversion offset > + * @cal_offset: calibration offset > + * @multiplier: conversion multiplier > + * @divider: conversion divider > + */ > +struct cpcap_adc_conversion_tbl { > + enum iio_chan_info_enum conv_type; > + int align_offset; > + int conv_offset; > + int cal_offset; > + int multiplier; > + int divider; > +}; > + > +/** > + * struct cpcap_adc_request - cpcap adc request > + * @channel: request channel > + * @phase_tbl: channel phasing table > + * @conv_tbl: channel conversion table > + * @bank_index: channel index within the bank > + * @timing: timing settings > + * @result: result > + */ > +struct cpcap_adc_request { > + int channel; > + const struct cpcap_adc_phasing_tbl *phase_tbl; > + const struct cpcap_adc_conversion_tbl *conv_tbl; > + int bank_index; > + enum cpcap_adc_timing timing; > + int result; > +}; > + > +/* Phasing table for channels. Note that channels 16 & 17 use BATTP and BATTI */ > +static const struct cpcap_adc_phasing_tbl bank_phasing[] = { > + /* Bank0 */ > + [CPCAP_ADC_AD0_BATTDETB] = {0, 0x80, 0x80, 0, 1023}, > + [CPCAP_ADC_BATTP] = {0, 0x80, 0x80, 0, 1023}, > + [CPCAP_ADC_VBUS] = {0, 0x80, 0x80, 0, 1023}, > + [CPCAP_ADC_AD3] = {0, 0x80, 0x80, 0, 1023}, > + [CPCAP_ADC_BPLUS_AD4] = {0, 0x80, 0x80, 0, 1023}, > + [CPCAP_ADC_CHG_ISENSE] = {0, 0x80, 0x80, -512, 511}, > + [CPCAP_ADC_BATTI] = {0, 0x80, 0x80, -512, 511}, > + [CPCAP_ADC_USB_ID] = {0, 0x80, 0x80, 0, 1023}, > + > + /* Bank1 */ > + [CPCAP_ADC_AD8] = {0, 0x80, 0x80, 0, 1023}, > + [CPCAP_ADC_AD9] = {0, 0x80, 0x80, 0, 1023}, > + [CPCAP_ADC_LICELL] = {0, 0x80, 0x80, 0, 1023}, > + [CPCAP_ADC_HV_BATTP] = {0, 0x80, 0x80, 0, 1023}, > + [CPCAP_ADC_TSX1_AD12] = {0, 0x80, 0x80, 0, 1023}, > + [CPCAP_ADC_TSX2_AD13] = {0, 0x80, 0x80, 0, 1023}, > + [CPCAP_ADC_TSY1_AD14] = {0, 0x80, 0x80, 0, 1023}, > + [CPCAP_ADC_TSY2_AD15] = {0, 0x80, 0x80, 0, 1023}, > +}; > + > +/* > + * Conversion table for channels. Updated during init based on calibration. > + * Here too channels 16 & 17 use BATTP and BATTI. > + */ > +static struct cpcap_adc_conversion_tbl bank_conversion[] = { > + /* Bank0 */ > + [CPCAP_ADC_AD0_BATTDETB] = { > + IIO_CHAN_INFO_PROCESSED, 0, 0, 0, 1, 1, > + }, > + [CPCAP_ADC_BATTP] = { > + IIO_CHAN_INFO_PROCESSED, 0, 2400, 0, 2300, 1023, > + }, > + [CPCAP_ADC_VBUS] = { > + IIO_CHAN_INFO_PROCESSED, 0, 0, 0, 10000, 1023, > + }, > + [CPCAP_ADC_AD3] = { > + IIO_CHAN_INFO_PROCESSED, 0, 0, 0, 1, 1, > + }, > + [CPCAP_ADC_BPLUS_AD4] = { > + IIO_CHAN_INFO_PROCESSED, 0, 2400, 0, 2300, 1023, > + }, > + [CPCAP_ADC_CHG_ISENSE] = { > + IIO_CHAN_INFO_PROCESSED, -512, 2, 0, 5000, 1023, > + }, > + [CPCAP_ADC_BATTI] = { > + IIO_CHAN_INFO_PROCESSED, -512, 2, 0, 5000, 1023, > + }, > + [CPCAP_ADC_USB_ID] = { > + IIO_CHAN_INFO_RAW, 0, 0, 0, 1, 1, > + }, > + > + /* Bank1 */ > + [CPCAP_ADC_AD8] = { > + IIO_CHAN_INFO_RAW, 0, 0, 0, 1, 1, > + }, > + [CPCAP_ADC_AD9] = { > + IIO_CHAN_INFO_RAW, 0, 0, 0, 1, 1, > + }, > + [CPCAP_ADC_LICELL] = { > + IIO_CHAN_INFO_PROCESSED, 0, 0, 0, 3400, 1023, > + }, > + [CPCAP_ADC_HV_BATTP] = { > + IIO_CHAN_INFO_RAW, 0, 0, 0, 1, 1, > + }, > + [CPCAP_ADC_TSX1_AD12] = { > + IIO_CHAN_INFO_RAW, 0, 0, 0, 1, 1, > + }, > + [CPCAP_ADC_TSX2_AD13] = { > + IIO_CHAN_INFO_RAW, 0, 0, 0, 1, 1, > + }, > + [CPCAP_ADC_TSY1_AD14] = { > + IIO_CHAN_INFO_RAW, 0, 0, 0, 1, 1, > + }, > + [CPCAP_ADC_TSY2_AD15] = { > + IIO_CHAN_INFO_RAW, 0, 0, 0, 1, 1, > + }, > +}; > + > +/* > + * Temperature lookup table of register values to milliCelcius. > + * REVISIT: Check the duplicate 0x3ff entry in a freezer > + */ > +static const int temp_map[CPCAP_MAX_TEMP_LVL][2] = { > + { 0x03ff, -40000 }, > + { 0x03ff, -35000 }, > + { 0x03ef, -30000 }, > + { 0x03b2, -25000 }, > + { 0x036c, -20000 }, > + { 0x0320, -15000 }, > + { 0x02d0, -10000 }, > + { 0x027f, -5000 }, > + { 0x022f, 0 }, > + { 0x01e4, 5000 }, > + { 0x019f, 10000 }, > + { 0x0161, 15000 }, > + { 0x012b, 20000 }, > + { 0x00fc, 25000 }, > + { 0x00d4, 30000 }, > + { 0x00b2, 35000 }, > + { 0x0095, 40000 }, > + { 0x007d, 45000 }, > + { 0x0069, 50000 }, > + { 0x0059, 55000 }, > + { 0x004b, 60000 }, > + { 0x003f, 65000 }, > + { 0x0036, 70000 }, > + { 0x002e, 75000 }, > + { 0x0027, 80000 }, > + { 0x0022, 85000 }, > + { 0x001d, 90000 }, > +}; > + > +#define CPCAP_CHAN(_type, _index, _address, _datasheet_name) { \ > + .type = (_type), \ > + .address = (_address), \ > + .indexed = 1, \ > + .channel = (_index), \ > + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | \ > + BIT(IIO_CHAN_INFO_PROCESSED), \ > + .scan_index = (_index), \ > + .scan_type = { \ > + .sign = 'u', \ > + .realbits = 10, \ > + .storagebits = 16, \ > + .endianness = IIO_CPU, \ > + }, \ > + .datasheet_name = (_datasheet_name), \ > +} > + > +/* > + * The datasheet names are from Motorola mapphone Linux kernel except > + * for the last two which might be uncalibrated charge voltage and > + * current. > + */ > +static const struct iio_chan_spec cpcap_adc_channels[] = { > + /* Bank0 */ > + CPCAP_CHAN(IIO_TEMP, 0, CPCAP_REG_ADCD0, "battdetb"), > + CPCAP_CHAN(IIO_VOLTAGE, 1, CPCAP_REG_ADCD1, "battp"), > + CPCAP_CHAN(IIO_VOLTAGE, 2, CPCAP_REG_ADCD2, "vbus"), > + CPCAP_CHAN(IIO_TEMP, 3, CPCAP_REG_ADCD3, "ad3"), > + CPCAP_CHAN(IIO_VOLTAGE, 4, CPCAP_REG_ADCD4, "ad4"), > + CPCAP_CHAN(IIO_CURRENT, 5, CPCAP_REG_ADCD5, "chg_isense"), > + CPCAP_CHAN(IIO_CURRENT, 6, CPCAP_REG_ADCD6, "batti"), > + CPCAP_CHAN(IIO_VOLTAGE, 7, CPCAP_REG_ADCD7, "usb_id"), > + > + /* Bank1 */ > + CPCAP_CHAN(IIO_CURRENT, 8, CPCAP_REG_ADCD0, "ad8"), > + CPCAP_CHAN(IIO_VOLTAGE, 9, CPCAP_REG_ADCD1, "ad9"), > + CPCAP_CHAN(IIO_VOLTAGE, 10, CPCAP_REG_ADCD2, "licell"), > + CPCAP_CHAN(IIO_VOLTAGE, 11, CPCAP_REG_ADCD3, "hv_battp"), > + CPCAP_CHAN(IIO_VOLTAGE, 12, CPCAP_REG_ADCD4, "tsx1_ad12"), > + CPCAP_CHAN(IIO_VOLTAGE, 13, CPCAP_REG_ADCD5, "tsx2_ad13"), > + CPCAP_CHAN(IIO_VOLTAGE, 14, CPCAP_REG_ADCD6, "tsy1_ad14"), > + CPCAP_CHAN(IIO_VOLTAGE, 15, CPCAP_REG_ADCD7, "tsy2_ad15"), > + > + /* There are two registers with multiplexed functionality */ > + CPCAP_CHAN(IIO_VOLTAGE, 16, CPCAP_REG_ADCD0, "chg_vsense"), > + CPCAP_CHAN(IIO_CURRENT, 17, CPCAP_REG_ADCD1, "batti2"), > +}; > + > +static irqreturn_t cpcap_adc_irq_thread(int irq, void *data) > +{ > + struct iio_dev *indio_dev = data; > + struct cpcap_adc *ddata = iio_priv(indio_dev); > + int error; > + > + error = regmap_update_bits(ddata->reg, CPCAP_REG_ADCC2, > + CPCAP_BIT_ADTRIG_DIS, > + CPCAP_BIT_ADTRIG_DIS); > + if (error) > + return IRQ_NONE; > + > + ddata->done = true; > + wake_up_interruptible(&ddata->wq_data_avail); > + > + return IRQ_HANDLED; > +} > + > +/* ADC calibration functions */ > +static void cpcap_adc_setup_calibrate(struct cpcap_adc *ddata, > + enum cpcap_adc_channel chan) > +{ > + unsigned int value = 0; > + unsigned long timeout = jiffies + msecs_to_jiffies(3000); > + int error; > + > + if ((chan != CPCAP_ADC_CHG_ISENSE) && > + (chan != CPCAP_ADC_BATTI)) > + return; > + > + value |= CPCAP_BIT_CAL_MODE | CPCAP_BIT_RAND0; > + value |= ((chan << 4) & > + (CPCAP_BIT_ADA2 | CPCAP_BIT_ADA1 | CPCAP_BIT_ADA0)); > + > + error = regmap_update_bits(ddata->reg, CPCAP_REG_ADCC1, > + CPCAP_BIT_CAL_MODE | CPCAP_BIT_ATOX | > + CPCAP_BIT_ATO3 | CPCAP_BIT_ATO2 | > + CPCAP_BIT_ATO1 | CPCAP_BIT_ATO0 | > + CPCAP_BIT_ADA2 | CPCAP_BIT_ADA1 | > + CPCAP_BIT_ADA0 | CPCAP_BIT_AD_SEL1 | > + CPCAP_BIT_RAND1 | CPCAP_BIT_RAND0, > + value); > + if (error) > + return; > + > + error = regmap_update_bits(ddata->reg, CPCAP_REG_ADCC2, > + CPCAP_BIT_ATOX_PS_FACTOR | > + CPCAP_BIT_ADC_PS_FACTOR1 | > + CPCAP_BIT_ADC_PS_FACTOR0, > + 0); > + if (error) > + return; > + > + error = regmap_update_bits(ddata->reg, CPCAP_REG_ADCC2, > + CPCAP_BIT_ADTRIG_DIS, > + CPCAP_BIT_ADTRIG_DIS); > + if (error) > + return; > + > + error = regmap_update_bits(ddata->reg, CPCAP_REG_ADCC2, > + CPCAP_BIT_ASC, > + CPCAP_BIT_ASC); > + if (error) > + return; > + > + do { > + schedule_timeout_uninterruptible(1); > + error = regmap_read(ddata->reg, CPCAP_REG_ADCC2, &value); > + if (error) > + return; > + } while ((value & CPCAP_BIT_ASC) && time_before(jiffies, timeout)); > + > + if (value & CPCAP_BIT_ASC) > + dev_err(ddata->dev, > + "Timeout waiting for calibration to complete\n"); > + > + error = regmap_update_bits(ddata->reg, CPCAP_REG_ADCC1, > + CPCAP_BIT_CAL_MODE, 0); > + if (error) > + return; > +} > + > +static int cpcap_adc_calibrate_one(struct cpcap_adc *ddata, > + int channel, > + u16 calibration_register, > + int lower_threshold, > + int upper_threshold) > +{ > + unsigned int calibration_data[2]; > + unsigned short cal_data_diff; > + int i, error; > + > + for (i = 0; i < CPCAP_ADC_MAX_RETRIES; i++) { > + calibration_data[0] = 0; > + calibration_data[1] = 0; > + cal_data_diff = 0; > + cpcap_adc_setup_calibrate(ddata, channel); > + error = regmap_read(ddata->reg, calibration_register, > + &calibration_data[0]); > + if (error) > + return error; > + cpcap_adc_setup_calibrate(ddata, channel); > + error = regmap_read(ddata->reg, calibration_register, > + &calibration_data[1]); > + if (error) > + return error; > + > + if (calibration_data[0] > calibration_data[1]) > + cal_data_diff = > + calibration_data[0] - calibration_data[1]; > + else > + cal_data_diff = > + calibration_data[1] - calibration_data[0]; > + > + if (((calibration_data[1] >= lower_threshold) && > + (calibration_data[1] <= upper_threshold) && > + (cal_data_diff <= ST_ADC_CALIBRATE_DIFF_THRESHOLD)) || > + (ddata->vendor == CPCAP_VENDOR_TI)) { > + bank_conversion[channel].cal_offset = > + ((short)calibration_data[1] * -1) + 512; > + dev_dbg(ddata->dev, "ch%i calibration complete: %i\n", > + channel, bank_conversion[channel].cal_offset); > + break; > + } > + usleep_range(5000, 10000); > + } > + > + return 0; > +} > + > +static int cpcap_adc_calibrate(struct cpcap_adc *ddata) > +{ > + int error; > + > + error = cpcap_adc_calibrate_one(ddata, CPCAP_ADC_CHG_ISENSE, > + CPCAP_REG_ADCAL1, > + ST_ADC_CAL_CHRGI_LOW_THRESHOLD, > + ST_ADC_CAL_CHRGI_HIGH_THRESHOLD); > + if (error) > + return error; > + > + error = cpcap_adc_calibrate_one(ddata, CPCAP_ADC_BATTI, > + CPCAP_REG_ADCAL2, > + ST_ADC_CAL_BATTI_LOW_THRESHOLD, > + ST_ADC_CAL_BATTI_HIGH_THRESHOLD); > + if (error) > + return error; > + > + return 0; > +} > + > +/* ADC setup, read and scale functions */ > +static void cpcap_adc_setup_bank(struct cpcap_adc *ddata, > + struct cpcap_adc_request *req) > +{ > + const struct cpcap_adc_ato *ato = ddata->ato; > + unsigned short value1 = 0; > + unsigned short value2 = 0; > + int error; > + > + if (!ato) > + return; > + > + switch (req->channel) { > + case CPCAP_ADC_AD8 ... CPCAP_ADC_TSY2_AD15: > + value1 |= CPCAP_BIT_AD_SEL1; > + break; > + case CPCAP_ADC_BATTP_PI16 ... CPCAP_ADC_BATTI_PI17: > + value1 |= CPCAP_BIT_RAND1; > + default: > + break; > + } > + > + switch (req->timing) { > + case CPCAP_ADC_TIMING_IN: > + value1 |= ato->ato_in; > + value1 |= ato->atox_in; > + value2 |= ato->adc_ps_factor_in; > + value2 |= ato->atox_ps_factor_in; > + break; > + case CPCAP_ADC_TIMING_OUT: > + value1 |= ato->ato_out; > + value1 |= ato->atox_out; > + value2 |= ato->adc_ps_factor_out; > + value2 |= ato->atox_ps_factor_out; > + break; > + > + case CPCAP_ADC_TIMING_IMM: > + default: > + break; > + } > + > + error = regmap_update_bits(ddata->reg, CPCAP_REG_ADCC1, > + CPCAP_BIT_CAL_MODE | CPCAP_BIT_ATOX | > + CPCAP_BIT_ATO3 | CPCAP_BIT_ATO2 | > + CPCAP_BIT_ATO1 | CPCAP_BIT_ATO0 | > + CPCAP_BIT_ADA2 | CPCAP_BIT_ADA1 | > + CPCAP_BIT_ADA0 | CPCAP_BIT_AD_SEL1 | > + CPCAP_BIT_RAND1 | CPCAP_BIT_RAND0, > + value1); > + if (error) > + return; > + > + error = regmap_update_bits(ddata->reg, CPCAP_REG_ADCC2, > + CPCAP_BIT_ATOX_PS_FACTOR | > + CPCAP_BIT_ADC_PS_FACTOR1 | > + CPCAP_BIT_ADC_PS_FACTOR0, > + value2); > + if (error) > + return; > + > + if (req->timing == CPCAP_ADC_TIMING_IMM) { > + error = regmap_update_bits(ddata->reg, CPCAP_REG_ADCC2, > + CPCAP_BIT_ADTRIG_DIS, > + CPCAP_BIT_ADTRIG_DIS); > + if (error) > + return; > + > + error = regmap_update_bits(ddata->reg, CPCAP_REG_ADCC2, > + CPCAP_BIT_ASC, > + CPCAP_BIT_ASC); > + if (error) > + return; > + } else { > + error = regmap_update_bits(ddata->reg, CPCAP_REG_ADCC2, > + CPCAP_BIT_ADTRIG_ONESHOT, > + CPCAP_BIT_ADTRIG_ONESHOT); > + if (error) > + return; > + > + error = regmap_update_bits(ddata->reg, CPCAP_REG_ADCC2, > + CPCAP_BIT_ADTRIG_DIS, 0); > + if (error) > + return; > + } > +} > + > +/* > + * Occasionally the ADC does not seem to start and there will be no > + * interrupt. Let's re-init interrupt to prevent the ADC from hanging > + * for the next request. It is unclear why this happens, but the next > + * request will usually work after doing this. > + */ > +static void cpcap_adc_quirk_reset_lost_irq(struct cpcap_adc *ddata) > +{ > + int error; > + > + dev_info(ddata->dev, "lost ADC irq, attempting to reinit\n"); > + disable_irq(ddata->irq); > + error = regmap_update_bits(ddata->reg, CPCAP_REG_ADCC2, > + CPCAP_BIT_ADTRIG_DIS, > + CPCAP_BIT_ADTRIG_DIS); > + if (error) > + dev_warn(ddata->dev, "%s reset failed: %i\n", > + __func__, error); > + enable_irq(ddata->irq); > +} > + > +static int cpcap_adc_start_bank(struct cpcap_adc *ddata, > + struct cpcap_adc_request *req) > +{ > + int i, error; > + > + req->timing = CPCAP_ADC_TIMING_IMM; > + ddata->done = false; > + > + for (i = 0; i < CPCAP_ADC_MAX_RETRIES; i++) { > + cpcap_adc_setup_bank(ddata, req); > + error = wait_event_interruptible_timeout(ddata->wq_data_avail, > + ddata->done, > + msecs_to_jiffies(50)); > + if (error > 0) > + return 0; > + > + if (error == 0) { > + cpcap_adc_quirk_reset_lost_irq(ddata); > + error = -ETIMEDOUT; > + continue; > + } > + > + if (error < 0) > + return error; > + } > + > + return error; > +} > + > +static void cpcap_adc_phase(struct cpcap_adc_request *req) > +{ > + const struct cpcap_adc_conversion_tbl *conv_tbl = req->conv_tbl; > + const struct cpcap_adc_phasing_tbl *phase_tbl = req->phase_tbl; > + int index = req->channel; > + > + /* Remuxed channels 16 and 17 use BATTP and BATTI entries */ > + switch (req->channel) { > + case CPCAP_ADC_BATTP: > + case CPCAP_ADC_BATTP_PI16: > + index = req->bank_index; > + req->result -= phase_tbl[index].offset; > + req->result -= CPCAP_FOUR_POINT_TWO_ADC; > + req->result *= phase_tbl[index].multiplier; > + if (phase_tbl[index].divider == 0) > + return; > + req->result /= phase_tbl[index].divider; > + req->result += CPCAP_FOUR_POINT_TWO_ADC; > + break; > + case CPCAP_ADC_BATTI_PI17: > + index = req->bank_index; > + /* fallthrough */ > + default: > + req->result += conv_tbl[index].cal_offset; > + req->result += conv_tbl[index].align_offset; > + req->result *= phase_tbl[index].multiplier; > + if (phase_tbl[index].divider == 0) > + return; > + req->result /= phase_tbl[index].divider; > + req->result += phase_tbl[index].offset; > + break; > + } > + > + if (req->result < phase_tbl[index].min) > + req->result = phase_tbl[index].min; > + else if (req->result > phase_tbl[index].max) > + req->result = phase_tbl[index].max; > +} > + > +/* Looks up temperatures in a table and calculates averages if needed */ > +static int cpcap_adc_table_to_millicelcius(unsigned short value) > +{ > + int i, result = 0, alpha; > + > + if (value <= temp_map[CPCAP_MAX_TEMP_LVL - 1][0]) > + return temp_map[CPCAP_MAX_TEMP_LVL - 1][1]; > + > + if (value >= temp_map[0][0]) > + return temp_map[0][1]; > + > + for (i = 0; i < CPCAP_MAX_TEMP_LVL - 1; i++) { > + if ((value <= temp_map[i][0]) && > + (value >= temp_map[i + 1][0])) { > + if (value == temp_map[i][0]) { > + result = temp_map[i][1]; > + } else if (value == temp_map[i + 1][0]) { > + result = temp_map[i + 1][1]; > + } else { > + alpha = ((value - temp_map[i][0]) * 1000) / > + (temp_map[i + 1][0] - temp_map[i][0]); > + > + result = temp_map[i][1] + > + ((alpha * (temp_map[i + 1][1] - > + temp_map[i][1])) / 1000); > + } > + break; > + } > + } > + > + return result; > +} > + > +static void cpcap_adc_convert(struct cpcap_adc_request *req) > +{ > + const struct cpcap_adc_conversion_tbl *conv_tbl = req->conv_tbl; > + int index = req->channel; > + > + /* Remuxed channels 16 and 17 use BATTP and BATTI entries */ > + switch (req->channel) { > + case CPCAP_ADC_BATTP_PI16: > + index = CPCAP_ADC_BATTP; > + break; > + case CPCAP_ADC_BATTI_PI17: > + index = CPCAP_ADC_BATTI; > + break; > + default: > + break; > + } > + > + /* No conversion for raw channels */ > + if (conv_tbl[index].conv_type == IIO_CHAN_INFO_RAW) > + return; > + > + /* Temperatures use a lookup table instead of conversion table */ > + if ((req->channel == CPCAP_ADC_AD0_BATTDETB) || > + (req->channel == CPCAP_ADC_AD3)) { > + req->result = > + cpcap_adc_table_to_millicelcius(req->result); > + > + return; > + } > + > + /* All processed channels use a conversion table */ > + req->result *= conv_tbl[index].multiplier; > + if (conv_tbl[index].divider == 0) > + return; > + req->result /= conv_tbl[index].divider; > + req->result += conv_tbl[index].conv_offset; > +} > + > +/* > + * REVISIT: Check if timed sampling can use multiple channels at the > + * same time. If not, replace channel_mask with just channel. > + */ > +static int cpcap_adc_read_bank_scaled(struct cpcap_adc *ddata, > + struct cpcap_adc_request *req) > +{ > + int calibration_data, error, addr; > + > + if (ddata->vendor == CPCAP_VENDOR_TI) { > + error = regmap_read(ddata->reg, CPCAP_REG_ADCAL1, > + &calibration_data); > + if (error) > + return error; > + bank_conversion[CPCAP_ADC_CHG_ISENSE].cal_offset = > + ((short)calibration_data * -1) + 512; > + > + error = regmap_read(ddata->reg, CPCAP_REG_ADCAL2, > + &calibration_data); > + if (error) > + return error; > + bank_conversion[CPCAP_ADC_BATTI].cal_offset = > + ((short)calibration_data * -1) + 512; > + } > + > + addr = CPCAP_REG_ADCD0 + req->bank_index * 4; > + > + error = regmap_read(ddata->reg, addr, &req->result); > + if (error) > + return error; > + > + req->result &= 0x3ff; > + cpcap_adc_phase(req); > + cpcap_adc_convert(req); > + > + return 0; > +} > + > +static int cpcap_adc_init_request(struct cpcap_adc_request *req, > + int channel) > +{ > + req->channel = channel; > + req->phase_tbl = bank_phasing; > + req->conv_tbl = bank_conversion; > + > + switch (channel) { > + case CPCAP_ADC_AD0_BATTDETB ... CPCAP_ADC_USB_ID: > + req->bank_index = channel; > + break; > + case CPCAP_ADC_AD8 ... CPCAP_ADC_TSY2_AD15: > + req->bank_index = channel - 8; > + break; > + case CPCAP_ADC_BATTP_PI16: > + req->bank_index = CPCAP_ADC_BATTP; > + break; > + case CPCAP_ADC_BATTI_PI17: > + req->bank_index = CPCAP_ADC_BATTI; > + break; > + default: > + return -EINVAL; > + } > + > + return 0; > +} > + > +static int cpcap_adc_read(struct iio_dev *indio_dev, > + struct iio_chan_spec const *chan, > + int *val, int *val2, long mask) > +{ > + struct cpcap_adc *ddata = iio_priv(indio_dev); > + struct cpcap_adc_request req; > + int error; > + > + error = cpcap_adc_init_request(&req, chan->channel); > + if (error) > + return error; > + > + switch (mask) { > + case IIO_CHAN_INFO_RAW: > + mutex_lock(&ddata->lock); > + error = cpcap_adc_start_bank(ddata, &req); > + if (error) > + goto err_unlock; > + error = regmap_read(ddata->reg, chan->address, val); > + if (error) > + goto err_unlock; > + mutex_unlock(&ddata->lock); > + break; > + case IIO_CHAN_INFO_PROCESSED: > + mutex_lock(&ddata->lock); > + error = cpcap_adc_start_bank(ddata, &req); > + if (error) > + goto err_unlock; > + error = cpcap_adc_read_bank_scaled(ddata, &req); > + if (error) > + goto err_unlock; > + mutex_unlock(&ddata->lock); > + *val = req.result; > + break; > + default: > + return -EINVAL; > + } > + > + return IIO_VAL_INT; > + > +err_unlock: > + mutex_unlock(&ddata->lock); > + dev_err(ddata->dev, "error reading ADC: %i\n", error); > + > + return error; > +} > + > +static const struct iio_info cpcap_adc_info = { > + .read_raw = &cpcap_adc_read, > + .driver_module = THIS_MODULE, > +}; > + > +/* > + * Configuration for Motorola mapphone series such as droid 4. > + * Copied from the Motorola mapphone kernel tree. > + */ > +static const struct cpcap_adc_ato mapphone_adc = { > + .ato_in = 0x0480, > + .atox_in = 0, > + .adc_ps_factor_in = 0x0200, > + .atox_ps_factor_in = 0, > + .ato_out = 0, > + .atox_out = 0, > + .adc_ps_factor_out = 0, > + .atox_ps_factor_out = 0, > +}; > + > +static const struct of_device_id cpcap_adc_id_table[] = { > + { > + .compatible = "motorola,cpcap-adc", > + }, > + { > + .compatible = "motorola,mapphone-cpcap-adc", > + .data = &mapphone_adc, > + }, > + { /* sentinel */ }, > +}; > +MODULE_DEVICE_TABLE(of, cpcap_adc_id_table); > + > +static int cpcap_adc_probe(struct platform_device *pdev) > +{ > + const struct of_device_id *match; > + struct cpcap_adc *ddata; > + struct iio_dev *indio_dev; > + int error; > + > + match = of_match_device(of_match_ptr(cpcap_adc_id_table), > + &pdev->dev); > + if (!match) > + return -EINVAL; > + > + if (!match->data) { > + dev_err(&pdev->dev, "no configuration data found\n"); > + > + return -ENODEV; > + } > + > + indio_dev = devm_iio_device_alloc(&pdev->dev, sizeof(*ddata)); > + if (!indio_dev) { > + dev_err(&pdev->dev, "failed to allocate iio device\n"); > + > + return -ENOMEM; > + } > + ddata = iio_priv(indio_dev); > + ddata->ato = match->data; > + ddata->dev = &pdev->dev; > + > + mutex_init(&ddata->lock); > + init_waitqueue_head(&ddata->wq_data_avail); > + > + indio_dev->modes = INDIO_DIRECT_MODE | INDIO_BUFFER_SOFTWARE; > + indio_dev->dev.parent = &pdev->dev; > + indio_dev->dev.of_node = pdev->dev.of_node; > + indio_dev->channels = cpcap_adc_channels; > + indio_dev->num_channels = ARRAY_SIZE(cpcap_adc_channels); > + indio_dev->name = dev_name(&pdev->dev); > + indio_dev->info = &cpcap_adc_info; > + > + ddata->reg = dev_get_regmap(pdev->dev.parent, NULL); > + if (!ddata->reg) > + return -ENODEV; > + > + error = cpcap_get_vendor(ddata->dev, ddata->reg, &ddata->vendor); > + if (error) > + return error; > + > + platform_set_drvdata(pdev, indio_dev); > + > + ddata->irq = platform_get_irq_byname(pdev, "adcdone"); > + if (!ddata->irq) > + return -ENODEV; > + > + error = devm_request_threaded_irq(&pdev->dev, ddata->irq, NULL, > + cpcap_adc_irq_thread, > + IRQF_TRIGGER_NONE, > + "cpcap-adc", indio_dev); > + if (error) { > + dev_err(&pdev->dev, "could not get irq: %i\n", > + error); > + > + return error; > + } > + > + error = cpcap_adc_calibrate(ddata); > + if (error) > + return error; > + > + dev_info(&pdev->dev, "CPCAP ADC device probed\n"); > + > + return devm_iio_device_register(&pdev->dev, indio_dev); > +} > + > +static struct platform_driver cpcap_adc_driver = { > + .driver = { > + .name = "cpcap_adc", > + .of_match_table = of_match_ptr(cpcap_adc_id_table), > + }, > + .probe = cpcap_adc_probe, > +}; > + > +module_platform_driver(cpcap_adc_driver); > + > +MODULE_ALIAS("platform:cpcap_adc"); > +MODULE_DESCRIPTION("CPCAP ADC driver"); > +MODULE_AUTHOR("Tony Lindgren <tony@atomide.com"); > +MODULE_LICENSE("GPL v2"); > -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On Thu, Mar 23, 2017 at 08:38:42PM -0700, Tony Lindgren wrote: > On Motorola phones like droid 4 there is a custom CPCAP PMIC. This PMIC > has ADCs that are used for battery charging and USB PHY VBUS and ID pin > detection. > > Unfortunately the only documentation for this ADC seems to be the > Motorola mapphone Linux kernel tree. I have tested that reading raw and > scaled values works, but I have not used the timed sampling that the ADC > seems to support. > > Let's add a minimal support for it so we can eventually provide IIO > channels for the related battery charging and USB PHY drivers. > > Cc: devicetree@vger.kernel.org > Cc: Marcel Partap <mpartap@gmx.net> > Cc: Michael Scott <michael.scott@linaro.org> > Cc: Sebastian Reichel <sre@kernel.org> > Signed-off-by: Tony Lindgren <tony@atomide.com> > --- > > Changes since v2: > > - Simplify things further by using channel based indexing and > remove more drivers specific enumerations > > Changes since v1: > > - Fix numerous issues pointed out by Peter Meerwald-Stadler > <pmeerw@pmeerw.net> and Jonathan Cameron <jic23@kernel.org> > > - Simplify things further by limiting read functions to a > single channel instead of a bank and got rid of the driver > specific cpcap_adc_conv_type in favor of IIO generic types > > --- > .../devicetree/bindings/iio/adc/cpcap-adc.txt | 18 + Acked-by: Rob Herring <robh@kernel.org> > drivers/iio/adc/Kconfig | 11 + > drivers/iio/adc/Makefile | 1 + > drivers/iio/adc/cpcap-adc.c | 1007 ++++++++++++++++++++ > 4 files changed, 1037 insertions(+) > create mode 100644 Documentation/devicetree/bindings/iio/adc/cpcap-adc.txt > create mode 100644 drivers/iio/adc/cpcap-adc.c -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On 29/03/17 22:26, Rob Herring wrote: > On Thu, Mar 23, 2017 at 08:38:42PM -0700, Tony Lindgren wrote: >> On Motorola phones like droid 4 there is a custom CPCAP PMIC. This PMIC >> has ADCs that are used for battery charging and USB PHY VBUS and ID pin >> detection. >> >> Unfortunately the only documentation for this ADC seems to be the >> Motorola mapphone Linux kernel tree. I have tested that reading raw and >> scaled values works, but I have not used the timed sampling that the ADC >> seems to support. >> >> Let's add a minimal support for it so we can eventually provide IIO >> channels for the related battery charging and USB PHY drivers. >> >> Cc: devicetree@vger.kernel.org >> Cc: Marcel Partap <mpartap@gmx.net> >> Cc: Michael Scott <michael.scott@linaro.org> >> Cc: Sebastian Reichel <sre@kernel.org> >> Signed-off-by: Tony Lindgren <tony@atomide.com> >> --- >> >> Changes since v2: >> >> - Simplify things further by using channel based indexing and >> remove more drivers specific enumerations >> >> Changes since v1: >> >> - Fix numerous issues pointed out by Peter Meerwald-Stadler >> <pmeerw@pmeerw.net> and Jonathan Cameron <jic23@kernel.org> >> >> - Simplify things further by limiting read functions to a >> single channel instead of a bank and got rid of the driver >> specific cpcap_adc_conv_type in favor of IIO generic types >> >> --- >> .../devicetree/bindings/iio/adc/cpcap-adc.txt | 18 + > > Acked-by: Rob Herring <robh@kernel.org> Been long enough now that I'm happy to take this. Thanks for looking at the bindings Rob! Applied to the togreg branch of iio.git and pushed out as testing for the autobuilders to play with it. Jonathan > >> drivers/iio/adc/Kconfig | 11 + >> drivers/iio/adc/Makefile | 1 + >> drivers/iio/adc/cpcap-adc.c | 1007 ++++++++++++++++++++ >> 4 files changed, 1037 insertions(+) >> create mode 100644 Documentation/devicetree/bindings/iio/adc/cpcap-adc.txt >> create mode 100644 drivers/iio/adc/cpcap-adc.c > -- > To unsubscribe from this list: send the line "unsubscribe linux-iio" in > the body of a message to majordomo@vger.kernel.org > More majordomo info at http://vger.kernel.org/majordomo-info.html > -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/Documentation/devicetree/bindings/iio/adc/cpcap-adc.txt b/Documentation/devicetree/bindings/iio/adc/cpcap-adc.txt new file mode 100644 --- /dev/null +++ b/Documentation/devicetree/bindings/iio/adc/cpcap-adc.txt @@ -0,0 +1,18 @@ +Motorola CPCAP PMIC ADC binding + +Required properties: +- compatible: Should be "motorola,cpcap-adc" or "motorola,mapphone-cpcap-adc" +- interrupt-parent: The interrupt controller +- interrupts: The interrupt number for the ADC device +- interrupt-names: Should be "adcdone" +- #io-channel-cells: Number of cells in an IIO specifier + +Example: + +cpcap_adc: adc { + compatible = "motorola,mapphone-cpcap-adc"; + interrupt-parent = <&cpcap>; + interrupts = <8 IRQ_TYPE_NONE>; + interrupt-names = "adcdone"; + #io-channel-cells = <1>; +}; diff --git a/drivers/iio/adc/Kconfig b/drivers/iio/adc/Kconfig --- a/drivers/iio/adc/Kconfig +++ b/drivers/iio/adc/Kconfig @@ -195,6 +195,17 @@ config CC10001_ADC This driver can also be built as a module. If so, the module will be called cc10001_adc. +config CPCAP_ADC + tristate "Motorola CPCAP PMIC ADC driver" + depends on MFD_CPCAP + select IIO_BUFFER + select IIO_TRIGGERED_BUFFER + help + Say yes here to build support for Motorola CPCAP PMIC ADC. + + This driver can also be built as a module. If so, the module will be + called cpcap-adc. + config DA9150_GPADC tristate "Dialog DA9150 GPADC driver support" depends on MFD_DA9150 diff --git a/drivers/iio/adc/Makefile b/drivers/iio/adc/Makefile --- a/drivers/iio/adc/Makefile +++ b/drivers/iio/adc/Makefile @@ -20,6 +20,7 @@ obj-$(CONFIG_AXP288_ADC) += axp288_adc.o obj-$(CONFIG_BCM_IPROC_ADC) += bcm_iproc_adc.o obj-$(CONFIG_BERLIN2_ADC) += berlin2-adc.o obj-$(CONFIG_CC10001_ADC) += cc10001_adc.o +obj-$(CONFIG_CPCAP_ADC) += cpcap-adc.o obj-$(CONFIG_DA9150_GPADC) += da9150-gpadc.o obj-$(CONFIG_ENVELOPE_DETECTOR) += envelope-detector.o obj-$(CONFIG_EXYNOS_ADC) += exynos_adc.o diff --git a/drivers/iio/adc/cpcap-adc.c b/drivers/iio/adc/cpcap-adc.c new file mode 100644 --- /dev/null +++ b/drivers/iio/adc/cpcap-adc.c @@ -0,0 +1,1007 @@ +/* + * Copyright (C) 2017 Tony Lindgren <tony@atomide.com> + * + * Rewritten for Linux IIO framework with some code based on + * earlier driver found in the Motorola Linux kernel: + * + * Copyright (C) 2009-2010 Motorola, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <linux/delay.h> +#include <linux/device.h> +#include <linux/err.h> +#include <linux/init.h> +#include <linux/interrupt.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/of.h> +#include <linux/of_platform.h> +#include <linux/platform_device.h> +#include <linux/regmap.h> + +#include <linux/iio/buffer.h> +#include <linux/iio/driver.h> +#include <linux/iio/iio.h> +#include <linux/iio/kfifo_buf.h> +#include <linux/mfd/motorola-cpcap.h> + +/* Register CPCAP_REG_ADCC1 bits */ +#define CPCAP_BIT_ADEN_AUTO_CLR BIT(15) /* Currently unused */ +#define CPCAP_BIT_CAL_MODE BIT(14) /* Set with BIT_RAND0 */ +#define CPCAP_BIT_ADC_CLK_SEL1 BIT(13) /* Currently unused */ +#define CPCAP_BIT_ADC_CLK_SEL0 BIT(12) /* Currently unused */ +#define CPCAP_BIT_ATOX BIT(11) +#define CPCAP_BIT_ATO3 BIT(10) +#define CPCAP_BIT_ATO2 BIT(9) +#define CPCAP_BIT_ATO1 BIT(8) +#define CPCAP_BIT_ATO0 BIT(7) +#define CPCAP_BIT_ADA2 BIT(6) +#define CPCAP_BIT_ADA1 BIT(5) +#define CPCAP_BIT_ADA0 BIT(4) +#define CPCAP_BIT_AD_SEL1 BIT(3) /* Set for bank1 */ +#define CPCAP_BIT_RAND1 BIT(2) /* Set for channel 16 & 17 */ +#define CPCAP_BIT_RAND0 BIT(1) /* Set with CAL_MODE */ +#define CPCAP_BIT_ADEN BIT(0) /* Currently unused */ + +/* Register CPCAP_REG_ADCC2 bits */ +#define CPCAP_BIT_CAL_FACTOR_ENABLE BIT(15) /* Currently unused */ +#define CPCAP_BIT_BATDETB_EN BIT(14) /* Currently unused */ +#define CPCAP_BIT_ADTRIG_ONESHOT BIT(13) /* Set for !TIMING_IMM */ +#define CPCAP_BIT_ASC BIT(12) /* Set for TIMING_IMM */ +#define CPCAP_BIT_ATOX_PS_FACTOR BIT(11) +#define CPCAP_BIT_ADC_PS_FACTOR1 BIT(10) +#define CPCAP_BIT_ADC_PS_FACTOR0 BIT(9) +#define CPCAP_BIT_AD4_SELECT BIT(8) /* Currently unused */ +#define CPCAP_BIT_ADC_BUSY BIT(7) /* Currently unused */ +#define CPCAP_BIT_THERMBIAS_EN BIT(6) /* Currently unused */ +#define CPCAP_BIT_ADTRIG_DIS BIT(5) /* Disable interrupt */ +#define CPCAP_BIT_LIADC BIT(4) /* Currently unused */ +#define CPCAP_BIT_TS_REFEN BIT(3) /* Currently unused */ +#define CPCAP_BIT_TS_M2 BIT(2) /* Currently unused */ +#define CPCAP_BIT_TS_M1 BIT(1) /* Currently unused */ +#define CPCAP_BIT_TS_M0 BIT(0) /* Currently unused */ + +#define CPCAP_MAX_TEMP_LVL 27 +#define CPCAP_FOUR_POINT_TWO_ADC 801 +#define ST_ADC_CAL_CHRGI_HIGH_THRESHOLD 530 +#define ST_ADC_CAL_CHRGI_LOW_THRESHOLD 494 +#define ST_ADC_CAL_BATTI_HIGH_THRESHOLD 530 +#define ST_ADC_CAL_BATTI_LOW_THRESHOLD 494 +#define ST_ADC_CALIBRATE_DIFF_THRESHOLD 3 + +#define CPCAP_ADC_MAX_RETRIES 5 /* Calibration and quirk */ + +/** + * struct cpcap_adc_ato - timing settings for cpcap adc + * + * Unfortunately no cpcap documentation available, please document when + * using these. + */ +struct cpcap_adc_ato { + unsigned short ato_in; + unsigned short atox_in; + unsigned short adc_ps_factor_in; + unsigned short atox_ps_factor_in; + unsigned short ato_out; + unsigned short atox_out; + unsigned short adc_ps_factor_out; + unsigned short atox_ps_factor_out; +}; + +/** + * struct cpcap-adc - cpcap adc device driver data + * @reg: cpcap regmap + * @dev: struct device + * @vendor: cpcap vendor + * @irq: interrupt + * @lock: mutex + * @ato: request timings + * @wq_data_avail: work queue + * @done: work done + */ +struct cpcap_adc { + struct regmap *reg; + struct device *dev; + u16 vendor; + int irq; + struct mutex lock; /* ADC register access lock */ + const struct cpcap_adc_ato *ato; + wait_queue_head_t wq_data_avail; + bool done; +}; + +/** + * enum cpcap_adc_channel - cpcap adc channels + */ +enum cpcap_adc_channel { + /* Bank0 channels */ + CPCAP_ADC_AD0_BATTDETB, /* Battery detection */ + CPCAP_ADC_BATTP, /* Battery voltage */ + CPCAP_ADC_VBUS, /* USB VBUS voltage */ + CPCAP_ADC_AD3, /* Battery temperature when charging */ + CPCAP_ADC_BPLUS_AD4, /* Another battery or system voltage */ + CPCAP_ADC_CHG_ISENSE, /* Calibrated charge current */ + CPCAP_ADC_BATTI, /* Calibrated system current */ + CPCAP_ADC_USB_ID, /* USB OTG ID, unused on droid 4? */ + + /* Bank1 channels */ + CPCAP_ADC_AD8, /* Seems unused */ + CPCAP_ADC_AD9, /* Seems unused */ + CPCAP_ADC_LICELL, /* Maybe system voltage? Always 3V */ + CPCAP_ADC_HV_BATTP, /* Another battery detection? */ + CPCAP_ADC_TSX1_AD12, /* Seems unused, for touchscreen? */ + CPCAP_ADC_TSX2_AD13, /* Seems unused, for touchscreen? */ + CPCAP_ADC_TSY1_AD14, /* Seems unused, for touchscreen? */ + CPCAP_ADC_TSY2_AD15, /* Seems unused, for touchscreen? */ + + /* Remuxed channels using bank0 entries */ + CPCAP_ADC_BATTP_PI16, /* Alternative mux mode for BATTP */ + CPCAP_ADC_BATTI_PI17, /* Alternative mux mode for BATTI */ + + CPCAP_ADC_CHANNEL_NUM, +}; + +/** + * enum cpcap_adc_timing - cpcap adc timing options + * + * CPCAP_ADC_TIMING_IMM seems to be immediate with no timings. + * Please document when using. + */ +enum cpcap_adc_timing { + CPCAP_ADC_TIMING_IMM, + CPCAP_ADC_TIMING_IN, + CPCAP_ADC_TIMING_OUT, +}; + +/** + * struct cpcap_adc_phasing_tbl - cpcap phasing table + * @offset: offset in the phasing table + * @multiplier: multiplier in the phasing table + * @divider: divider in the phasing table + * @min: minimum value + * @max: maximum value + */ +struct cpcap_adc_phasing_tbl { + short offset; + unsigned short multiplier; + unsigned short divider; + short min; + short max; +}; + +/** + * struct cpcap_adc_conversion_tbl - cpcap conversion table + * @conv_type: conversion type + * @align_offset: align offset + * @conv_offset: conversion offset + * @cal_offset: calibration offset + * @multiplier: conversion multiplier + * @divider: conversion divider + */ +struct cpcap_adc_conversion_tbl { + enum iio_chan_info_enum conv_type; + int align_offset; + int conv_offset; + int cal_offset; + int multiplier; + int divider; +}; + +/** + * struct cpcap_adc_request - cpcap adc request + * @channel: request channel + * @phase_tbl: channel phasing table + * @conv_tbl: channel conversion table + * @bank_index: channel index within the bank + * @timing: timing settings + * @result: result + */ +struct cpcap_adc_request { + int channel; + const struct cpcap_adc_phasing_tbl *phase_tbl; + const struct cpcap_adc_conversion_tbl *conv_tbl; + int bank_index; + enum cpcap_adc_timing timing; + int result; +}; + +/* Phasing table for channels. Note that channels 16 & 17 use BATTP and BATTI */ +static const struct cpcap_adc_phasing_tbl bank_phasing[] = { + /* Bank0 */ + [CPCAP_ADC_AD0_BATTDETB] = {0, 0x80, 0x80, 0, 1023}, + [CPCAP_ADC_BATTP] = {0, 0x80, 0x80, 0, 1023}, + [CPCAP_ADC_VBUS] = {0, 0x80, 0x80, 0, 1023}, + [CPCAP_ADC_AD3] = {0, 0x80, 0x80, 0, 1023}, + [CPCAP_ADC_BPLUS_AD4] = {0, 0x80, 0x80, 0, 1023}, + [CPCAP_ADC_CHG_ISENSE] = {0, 0x80, 0x80, -512, 511}, + [CPCAP_ADC_BATTI] = {0, 0x80, 0x80, -512, 511}, + [CPCAP_ADC_USB_ID] = {0, 0x80, 0x80, 0, 1023}, + + /* Bank1 */ + [CPCAP_ADC_AD8] = {0, 0x80, 0x80, 0, 1023}, + [CPCAP_ADC_AD9] = {0, 0x80, 0x80, 0, 1023}, + [CPCAP_ADC_LICELL] = {0, 0x80, 0x80, 0, 1023}, + [CPCAP_ADC_HV_BATTP] = {0, 0x80, 0x80, 0, 1023}, + [CPCAP_ADC_TSX1_AD12] = {0, 0x80, 0x80, 0, 1023}, + [CPCAP_ADC_TSX2_AD13] = {0, 0x80, 0x80, 0, 1023}, + [CPCAP_ADC_TSY1_AD14] = {0, 0x80, 0x80, 0, 1023}, + [CPCAP_ADC_TSY2_AD15] = {0, 0x80, 0x80, 0, 1023}, +}; + +/* + * Conversion table for channels. Updated during init based on calibration. + * Here too channels 16 & 17 use BATTP and BATTI. + */ +static struct cpcap_adc_conversion_tbl bank_conversion[] = { + /* Bank0 */ + [CPCAP_ADC_AD0_BATTDETB] = { + IIO_CHAN_INFO_PROCESSED, 0, 0, 0, 1, 1, + }, + [CPCAP_ADC_BATTP] = { + IIO_CHAN_INFO_PROCESSED, 0, 2400, 0, 2300, 1023, + }, + [CPCAP_ADC_VBUS] = { + IIO_CHAN_INFO_PROCESSED, 0, 0, 0, 10000, 1023, + }, + [CPCAP_ADC_AD3] = { + IIO_CHAN_INFO_PROCESSED, 0, 0, 0, 1, 1, + }, + [CPCAP_ADC_BPLUS_AD4] = { + IIO_CHAN_INFO_PROCESSED, 0, 2400, 0, 2300, 1023, + }, + [CPCAP_ADC_CHG_ISENSE] = { + IIO_CHAN_INFO_PROCESSED, -512, 2, 0, 5000, 1023, + }, + [CPCAP_ADC_BATTI] = { + IIO_CHAN_INFO_PROCESSED, -512, 2, 0, 5000, 1023, + }, + [CPCAP_ADC_USB_ID] = { + IIO_CHAN_INFO_RAW, 0, 0, 0, 1, 1, + }, + + /* Bank1 */ + [CPCAP_ADC_AD8] = { + IIO_CHAN_INFO_RAW, 0, 0, 0, 1, 1, + }, + [CPCAP_ADC_AD9] = { + IIO_CHAN_INFO_RAW, 0, 0, 0, 1, 1, + }, + [CPCAP_ADC_LICELL] = { + IIO_CHAN_INFO_PROCESSED, 0, 0, 0, 3400, 1023, + }, + [CPCAP_ADC_HV_BATTP] = { + IIO_CHAN_INFO_RAW, 0, 0, 0, 1, 1, + }, + [CPCAP_ADC_TSX1_AD12] = { + IIO_CHAN_INFO_RAW, 0, 0, 0, 1, 1, + }, + [CPCAP_ADC_TSX2_AD13] = { + IIO_CHAN_INFO_RAW, 0, 0, 0, 1, 1, + }, + [CPCAP_ADC_TSY1_AD14] = { + IIO_CHAN_INFO_RAW, 0, 0, 0, 1, 1, + }, + [CPCAP_ADC_TSY2_AD15] = { + IIO_CHAN_INFO_RAW, 0, 0, 0, 1, 1, + }, +}; + +/* + * Temperature lookup table of register values to milliCelcius. + * REVISIT: Check the duplicate 0x3ff entry in a freezer + */ +static const int temp_map[CPCAP_MAX_TEMP_LVL][2] = { + { 0x03ff, -40000 }, + { 0x03ff, -35000 }, + { 0x03ef, -30000 }, + { 0x03b2, -25000 }, + { 0x036c, -20000 }, + { 0x0320, -15000 }, + { 0x02d0, -10000 }, + { 0x027f, -5000 }, + { 0x022f, 0 }, + { 0x01e4, 5000 }, + { 0x019f, 10000 }, + { 0x0161, 15000 }, + { 0x012b, 20000 }, + { 0x00fc, 25000 }, + { 0x00d4, 30000 }, + { 0x00b2, 35000 }, + { 0x0095, 40000 }, + { 0x007d, 45000 }, + { 0x0069, 50000 }, + { 0x0059, 55000 }, + { 0x004b, 60000 }, + { 0x003f, 65000 }, + { 0x0036, 70000 }, + { 0x002e, 75000 }, + { 0x0027, 80000 }, + { 0x0022, 85000 }, + { 0x001d, 90000 }, +}; + +#define CPCAP_CHAN(_type, _index, _address, _datasheet_name) { \ + .type = (_type), \ + .address = (_address), \ + .indexed = 1, \ + .channel = (_index), \ + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | \ + BIT(IIO_CHAN_INFO_PROCESSED), \ + .scan_index = (_index), \ + .scan_type = { \ + .sign = 'u', \ + .realbits = 10, \ + .storagebits = 16, \ + .endianness = IIO_CPU, \ + }, \ + .datasheet_name = (_datasheet_name), \ +} + +/* + * The datasheet names are from Motorola mapphone Linux kernel except + * for the last two which might be uncalibrated charge voltage and + * current. + */ +static const struct iio_chan_spec cpcap_adc_channels[] = { + /* Bank0 */ + CPCAP_CHAN(IIO_TEMP, 0, CPCAP_REG_ADCD0, "battdetb"), + CPCAP_CHAN(IIO_VOLTAGE, 1, CPCAP_REG_ADCD1, "battp"), + CPCAP_CHAN(IIO_VOLTAGE, 2, CPCAP_REG_ADCD2, "vbus"), + CPCAP_CHAN(IIO_TEMP, 3, CPCAP_REG_ADCD3, "ad3"), + CPCAP_CHAN(IIO_VOLTAGE, 4, CPCAP_REG_ADCD4, "ad4"), + CPCAP_CHAN(IIO_CURRENT, 5, CPCAP_REG_ADCD5, "chg_isense"), + CPCAP_CHAN(IIO_CURRENT, 6, CPCAP_REG_ADCD6, "batti"), + CPCAP_CHAN(IIO_VOLTAGE, 7, CPCAP_REG_ADCD7, "usb_id"), + + /* Bank1 */ + CPCAP_CHAN(IIO_CURRENT, 8, CPCAP_REG_ADCD0, "ad8"), + CPCAP_CHAN(IIO_VOLTAGE, 9, CPCAP_REG_ADCD1, "ad9"), + CPCAP_CHAN(IIO_VOLTAGE, 10, CPCAP_REG_ADCD2, "licell"), + CPCAP_CHAN(IIO_VOLTAGE, 11, CPCAP_REG_ADCD3, "hv_battp"), + CPCAP_CHAN(IIO_VOLTAGE, 12, CPCAP_REG_ADCD4, "tsx1_ad12"), + CPCAP_CHAN(IIO_VOLTAGE, 13, CPCAP_REG_ADCD5, "tsx2_ad13"), + CPCAP_CHAN(IIO_VOLTAGE, 14, CPCAP_REG_ADCD6, "tsy1_ad14"), + CPCAP_CHAN(IIO_VOLTAGE, 15, CPCAP_REG_ADCD7, "tsy2_ad15"), + + /* There are two registers with multiplexed functionality */ + CPCAP_CHAN(IIO_VOLTAGE, 16, CPCAP_REG_ADCD0, "chg_vsense"), + CPCAP_CHAN(IIO_CURRENT, 17, CPCAP_REG_ADCD1, "batti2"), +}; + +static irqreturn_t cpcap_adc_irq_thread(int irq, void *data) +{ + struct iio_dev *indio_dev = data; + struct cpcap_adc *ddata = iio_priv(indio_dev); + int error; + + error = regmap_update_bits(ddata->reg, CPCAP_REG_ADCC2, + CPCAP_BIT_ADTRIG_DIS, + CPCAP_BIT_ADTRIG_DIS); + if (error) + return IRQ_NONE; + + ddata->done = true; + wake_up_interruptible(&ddata->wq_data_avail); + + return IRQ_HANDLED; +} + +/* ADC calibration functions */ +static void cpcap_adc_setup_calibrate(struct cpcap_adc *ddata, + enum cpcap_adc_channel chan) +{ + unsigned int value = 0; + unsigned long timeout = jiffies + msecs_to_jiffies(3000); + int error; + + if ((chan != CPCAP_ADC_CHG_ISENSE) && + (chan != CPCAP_ADC_BATTI)) + return; + + value |= CPCAP_BIT_CAL_MODE | CPCAP_BIT_RAND0; + value |= ((chan << 4) & + (CPCAP_BIT_ADA2 | CPCAP_BIT_ADA1 | CPCAP_BIT_ADA0)); + + error = regmap_update_bits(ddata->reg, CPCAP_REG_ADCC1, + CPCAP_BIT_CAL_MODE | CPCAP_BIT_ATOX | + CPCAP_BIT_ATO3 | CPCAP_BIT_ATO2 | + CPCAP_BIT_ATO1 | CPCAP_BIT_ATO0 | + CPCAP_BIT_ADA2 | CPCAP_BIT_ADA1 | + CPCAP_BIT_ADA0 | CPCAP_BIT_AD_SEL1 | + CPCAP_BIT_RAND1 | CPCAP_BIT_RAND0, + value); + if (error) + return; + + error = regmap_update_bits(ddata->reg, CPCAP_REG_ADCC2, + CPCAP_BIT_ATOX_PS_FACTOR | + CPCAP_BIT_ADC_PS_FACTOR1 | + CPCAP_BIT_ADC_PS_FACTOR0, + 0); + if (error) + return; + + error = regmap_update_bits(ddata->reg, CPCAP_REG_ADCC2, + CPCAP_BIT_ADTRIG_DIS, + CPCAP_BIT_ADTRIG_DIS); + if (error) + return; + + error = regmap_update_bits(ddata->reg, CPCAP_REG_ADCC2, + CPCAP_BIT_ASC, + CPCAP_BIT_ASC); + if (error) + return; + + do { + schedule_timeout_uninterruptible(1); + error = regmap_read(ddata->reg, CPCAP_REG_ADCC2, &value); + if (error) + return; + } while ((value & CPCAP_BIT_ASC) && time_before(jiffies, timeout)); + + if (value & CPCAP_BIT_ASC) + dev_err(ddata->dev, + "Timeout waiting for calibration to complete\n"); + + error = regmap_update_bits(ddata->reg, CPCAP_REG_ADCC1, + CPCAP_BIT_CAL_MODE, 0); + if (error) + return; +} + +static int cpcap_adc_calibrate_one(struct cpcap_adc *ddata, + int channel, + u16 calibration_register, + int lower_threshold, + int upper_threshold) +{ + unsigned int calibration_data[2]; + unsigned short cal_data_diff; + int i, error; + + for (i = 0; i < CPCAP_ADC_MAX_RETRIES; i++) { + calibration_data[0] = 0; + calibration_data[1] = 0; + cal_data_diff = 0; + cpcap_adc_setup_calibrate(ddata, channel); + error = regmap_read(ddata->reg, calibration_register, + &calibration_data[0]); + if (error) + return error; + cpcap_adc_setup_calibrate(ddata, channel); + error = regmap_read(ddata->reg, calibration_register, + &calibration_data[1]); + if (error) + return error; + + if (calibration_data[0] > calibration_data[1]) + cal_data_diff = + calibration_data[0] - calibration_data[1]; + else + cal_data_diff = + calibration_data[1] - calibration_data[0]; + + if (((calibration_data[1] >= lower_threshold) && + (calibration_data[1] <= upper_threshold) && + (cal_data_diff <= ST_ADC_CALIBRATE_DIFF_THRESHOLD)) || + (ddata->vendor == CPCAP_VENDOR_TI)) { + bank_conversion[channel].cal_offset = + ((short)calibration_data[1] * -1) + 512; + dev_dbg(ddata->dev, "ch%i calibration complete: %i\n", + channel, bank_conversion[channel].cal_offset); + break; + } + usleep_range(5000, 10000); + } + + return 0; +} + +static int cpcap_adc_calibrate(struct cpcap_adc *ddata) +{ + int error; + + error = cpcap_adc_calibrate_one(ddata, CPCAP_ADC_CHG_ISENSE, + CPCAP_REG_ADCAL1, + ST_ADC_CAL_CHRGI_LOW_THRESHOLD, + ST_ADC_CAL_CHRGI_HIGH_THRESHOLD); + if (error) + return error; + + error = cpcap_adc_calibrate_one(ddata, CPCAP_ADC_BATTI, + CPCAP_REG_ADCAL2, + ST_ADC_CAL_BATTI_LOW_THRESHOLD, + ST_ADC_CAL_BATTI_HIGH_THRESHOLD); + if (error) + return error; + + return 0; +} + +/* ADC setup, read and scale functions */ +static void cpcap_adc_setup_bank(struct cpcap_adc *ddata, + struct cpcap_adc_request *req) +{ + const struct cpcap_adc_ato *ato = ddata->ato; + unsigned short value1 = 0; + unsigned short value2 = 0; + int error; + + if (!ato) + return; + + switch (req->channel) { + case CPCAP_ADC_AD8 ... CPCAP_ADC_TSY2_AD15: + value1 |= CPCAP_BIT_AD_SEL1; + break; + case CPCAP_ADC_BATTP_PI16 ... CPCAP_ADC_BATTI_PI17: + value1 |= CPCAP_BIT_RAND1; + default: + break; + } + + switch (req->timing) { + case CPCAP_ADC_TIMING_IN: + value1 |= ato->ato_in; + value1 |= ato->atox_in; + value2 |= ato->adc_ps_factor_in; + value2 |= ato->atox_ps_factor_in; + break; + case CPCAP_ADC_TIMING_OUT: + value1 |= ato->ato_out; + value1 |= ato->atox_out; + value2 |= ato->adc_ps_factor_out; + value2 |= ato->atox_ps_factor_out; + break; + + case CPCAP_ADC_TIMING_IMM: + default: + break; + } + + error = regmap_update_bits(ddata->reg, CPCAP_REG_ADCC1, + CPCAP_BIT_CAL_MODE | CPCAP_BIT_ATOX | + CPCAP_BIT_ATO3 | CPCAP_BIT_ATO2 | + CPCAP_BIT_ATO1 | CPCAP_BIT_ATO0 | + CPCAP_BIT_ADA2 | CPCAP_BIT_ADA1 | + CPCAP_BIT_ADA0 | CPCAP_BIT_AD_SEL1 | + CPCAP_BIT_RAND1 | CPCAP_BIT_RAND0, + value1); + if (error) + return; + + error = regmap_update_bits(ddata->reg, CPCAP_REG_ADCC2, + CPCAP_BIT_ATOX_PS_FACTOR | + CPCAP_BIT_ADC_PS_FACTOR1 | + CPCAP_BIT_ADC_PS_FACTOR0, + value2); + if (error) + return; + + if (req->timing == CPCAP_ADC_TIMING_IMM) { + error = regmap_update_bits(ddata->reg, CPCAP_REG_ADCC2, + CPCAP_BIT_ADTRIG_DIS, + CPCAP_BIT_ADTRIG_DIS); + if (error) + return; + + error = regmap_update_bits(ddata->reg, CPCAP_REG_ADCC2, + CPCAP_BIT_ASC, + CPCAP_BIT_ASC); + if (error) + return; + } else { + error = regmap_update_bits(ddata->reg, CPCAP_REG_ADCC2, + CPCAP_BIT_ADTRIG_ONESHOT, + CPCAP_BIT_ADTRIG_ONESHOT); + if (error) + return; + + error = regmap_update_bits(ddata->reg, CPCAP_REG_ADCC2, + CPCAP_BIT_ADTRIG_DIS, 0); + if (error) + return; + } +} + +/* + * Occasionally the ADC does not seem to start and there will be no + * interrupt. Let's re-init interrupt to prevent the ADC from hanging + * for the next request. It is unclear why this happens, but the next + * request will usually work after doing this. + */ +static void cpcap_adc_quirk_reset_lost_irq(struct cpcap_adc *ddata) +{ + int error; + + dev_info(ddata->dev, "lost ADC irq, attempting to reinit\n"); + disable_irq(ddata->irq); + error = regmap_update_bits(ddata->reg, CPCAP_REG_ADCC2, + CPCAP_BIT_ADTRIG_DIS, + CPCAP_BIT_ADTRIG_DIS); + if (error) + dev_warn(ddata->dev, "%s reset failed: %i\n", + __func__, error); + enable_irq(ddata->irq); +} + +static int cpcap_adc_start_bank(struct cpcap_adc *ddata, + struct cpcap_adc_request *req) +{ + int i, error; + + req->timing = CPCAP_ADC_TIMING_IMM; + ddata->done = false; + + for (i = 0; i < CPCAP_ADC_MAX_RETRIES; i++) { + cpcap_adc_setup_bank(ddata, req); + error = wait_event_interruptible_timeout(ddata->wq_data_avail, + ddata->done, + msecs_to_jiffies(50)); + if (error > 0) + return 0; + + if (error == 0) { + cpcap_adc_quirk_reset_lost_irq(ddata); + error = -ETIMEDOUT; + continue; + } + + if (error < 0) + return error; + } + + return error; +} + +static void cpcap_adc_phase(struct cpcap_adc_request *req) +{ + const struct cpcap_adc_conversion_tbl *conv_tbl = req->conv_tbl; + const struct cpcap_adc_phasing_tbl *phase_tbl = req->phase_tbl; + int index = req->channel; + + /* Remuxed channels 16 and 17 use BATTP and BATTI entries */ + switch (req->channel) { + case CPCAP_ADC_BATTP: + case CPCAP_ADC_BATTP_PI16: + index = req->bank_index; + req->result -= phase_tbl[index].offset; + req->result -= CPCAP_FOUR_POINT_TWO_ADC; + req->result *= phase_tbl[index].multiplier; + if (phase_tbl[index].divider == 0) + return; + req->result /= phase_tbl[index].divider; + req->result += CPCAP_FOUR_POINT_TWO_ADC; + break; + case CPCAP_ADC_BATTI_PI17: + index = req->bank_index; + /* fallthrough */ + default: + req->result += conv_tbl[index].cal_offset; + req->result += conv_tbl[index].align_offset; + req->result *= phase_tbl[index].multiplier; + if (phase_tbl[index].divider == 0) + return; + req->result /= phase_tbl[index].divider; + req->result += phase_tbl[index].offset; + break; + } + + if (req->result < phase_tbl[index].min) + req->result = phase_tbl[index].min; + else if (req->result > phase_tbl[index].max) + req->result = phase_tbl[index].max; +} + +/* Looks up temperatures in a table and calculates averages if needed */ +static int cpcap_adc_table_to_millicelcius(unsigned short value) +{ + int i, result = 0, alpha; + + if (value <= temp_map[CPCAP_MAX_TEMP_LVL - 1][0]) + return temp_map[CPCAP_MAX_TEMP_LVL - 1][1]; + + if (value >= temp_map[0][0]) + return temp_map[0][1]; + + for (i = 0; i < CPCAP_MAX_TEMP_LVL - 1; i++) { + if ((value <= temp_map[i][0]) && + (value >= temp_map[i + 1][0])) { + if (value == temp_map[i][0]) { + result = temp_map[i][1]; + } else if (value == temp_map[i + 1][0]) { + result = temp_map[i + 1][1]; + } else { + alpha = ((value - temp_map[i][0]) * 1000) / + (temp_map[i + 1][0] - temp_map[i][0]); + + result = temp_map[i][1] + + ((alpha * (temp_map[i + 1][1] - + temp_map[i][1])) / 1000); + } + break; + } + } + + return result; +} + +static void cpcap_adc_convert(struct cpcap_adc_request *req) +{ + const struct cpcap_adc_conversion_tbl *conv_tbl = req->conv_tbl; + int index = req->channel; + + /* Remuxed channels 16 and 17 use BATTP and BATTI entries */ + switch (req->channel) { + case CPCAP_ADC_BATTP_PI16: + index = CPCAP_ADC_BATTP; + break; + case CPCAP_ADC_BATTI_PI17: + index = CPCAP_ADC_BATTI; + break; + default: + break; + } + + /* No conversion for raw channels */ + if (conv_tbl[index].conv_type == IIO_CHAN_INFO_RAW) + return; + + /* Temperatures use a lookup table instead of conversion table */ + if ((req->channel == CPCAP_ADC_AD0_BATTDETB) || + (req->channel == CPCAP_ADC_AD3)) { + req->result = + cpcap_adc_table_to_millicelcius(req->result); + + return; + } + + /* All processed channels use a conversion table */ + req->result *= conv_tbl[index].multiplier; + if (conv_tbl[index].divider == 0) + return; + req->result /= conv_tbl[index].divider; + req->result += conv_tbl[index].conv_offset; +} + +/* + * REVISIT: Check if timed sampling can use multiple channels at the + * same time. If not, replace channel_mask with just channel. + */ +static int cpcap_adc_read_bank_scaled(struct cpcap_adc *ddata, + struct cpcap_adc_request *req) +{ + int calibration_data, error, addr; + + if (ddata->vendor == CPCAP_VENDOR_TI) { + error = regmap_read(ddata->reg, CPCAP_REG_ADCAL1, + &calibration_data); + if (error) + return error; + bank_conversion[CPCAP_ADC_CHG_ISENSE].cal_offset = + ((short)calibration_data * -1) + 512; + + error = regmap_read(ddata->reg, CPCAP_REG_ADCAL2, + &calibration_data); + if (error) + return error; + bank_conversion[CPCAP_ADC_BATTI].cal_offset = + ((short)calibration_data * -1) + 512; + } + + addr = CPCAP_REG_ADCD0 + req->bank_index * 4; + + error = regmap_read(ddata->reg, addr, &req->result); + if (error) + return error; + + req->result &= 0x3ff; + cpcap_adc_phase(req); + cpcap_adc_convert(req); + + return 0; +} + +static int cpcap_adc_init_request(struct cpcap_adc_request *req, + int channel) +{ + req->channel = channel; + req->phase_tbl = bank_phasing; + req->conv_tbl = bank_conversion; + + switch (channel) { + case CPCAP_ADC_AD0_BATTDETB ... CPCAP_ADC_USB_ID: + req->bank_index = channel; + break; + case CPCAP_ADC_AD8 ... CPCAP_ADC_TSY2_AD15: + req->bank_index = channel - 8; + break; + case CPCAP_ADC_BATTP_PI16: + req->bank_index = CPCAP_ADC_BATTP; + break; + case CPCAP_ADC_BATTI_PI17: + req->bank_index = CPCAP_ADC_BATTI; + break; + default: + return -EINVAL; + } + + return 0; +} + +static int cpcap_adc_read(struct iio_dev *indio_dev, + struct iio_chan_spec const *chan, + int *val, int *val2, long mask) +{ + struct cpcap_adc *ddata = iio_priv(indio_dev); + struct cpcap_adc_request req; + int error; + + error = cpcap_adc_init_request(&req, chan->channel); + if (error) + return error; + + switch (mask) { + case IIO_CHAN_INFO_RAW: + mutex_lock(&ddata->lock); + error = cpcap_adc_start_bank(ddata, &req); + if (error) + goto err_unlock; + error = regmap_read(ddata->reg, chan->address, val); + if (error) + goto err_unlock; + mutex_unlock(&ddata->lock); + break; + case IIO_CHAN_INFO_PROCESSED: + mutex_lock(&ddata->lock); + error = cpcap_adc_start_bank(ddata, &req); + if (error) + goto err_unlock; + error = cpcap_adc_read_bank_scaled(ddata, &req); + if (error) + goto err_unlock; + mutex_unlock(&ddata->lock); + *val = req.result; + break; + default: + return -EINVAL; + } + + return IIO_VAL_INT; + +err_unlock: + mutex_unlock(&ddata->lock); + dev_err(ddata->dev, "error reading ADC: %i\n", error); + + return error; +} + +static const struct iio_info cpcap_adc_info = { + .read_raw = &cpcap_adc_read, + .driver_module = THIS_MODULE, +}; + +/* + * Configuration for Motorola mapphone series such as droid 4. + * Copied from the Motorola mapphone kernel tree. + */ +static const struct cpcap_adc_ato mapphone_adc = { + .ato_in = 0x0480, + .atox_in = 0, + .adc_ps_factor_in = 0x0200, + .atox_ps_factor_in = 0, + .ato_out = 0, + .atox_out = 0, + .adc_ps_factor_out = 0, + .atox_ps_factor_out = 0, +}; + +static const struct of_device_id cpcap_adc_id_table[] = { + { + .compatible = "motorola,cpcap-adc", + }, + { + .compatible = "motorola,mapphone-cpcap-adc", + .data = &mapphone_adc, + }, + { /* sentinel */ }, +}; +MODULE_DEVICE_TABLE(of, cpcap_adc_id_table); + +static int cpcap_adc_probe(struct platform_device *pdev) +{ + const struct of_device_id *match; + struct cpcap_adc *ddata; + struct iio_dev *indio_dev; + int error; + + match = of_match_device(of_match_ptr(cpcap_adc_id_table), + &pdev->dev); + if (!match) + return -EINVAL; + + if (!match->data) { + dev_err(&pdev->dev, "no configuration data found\n"); + + return -ENODEV; + } + + indio_dev = devm_iio_device_alloc(&pdev->dev, sizeof(*ddata)); + if (!indio_dev) { + dev_err(&pdev->dev, "failed to allocate iio device\n"); + + return -ENOMEM; + } + ddata = iio_priv(indio_dev); + ddata->ato = match->data; + ddata->dev = &pdev->dev; + + mutex_init(&ddata->lock); + init_waitqueue_head(&ddata->wq_data_avail); + + indio_dev->modes = INDIO_DIRECT_MODE | INDIO_BUFFER_SOFTWARE; + indio_dev->dev.parent = &pdev->dev; + indio_dev->dev.of_node = pdev->dev.of_node; + indio_dev->channels = cpcap_adc_channels; + indio_dev->num_channels = ARRAY_SIZE(cpcap_adc_channels); + indio_dev->name = dev_name(&pdev->dev); + indio_dev->info = &cpcap_adc_info; + + ddata->reg = dev_get_regmap(pdev->dev.parent, NULL); + if (!ddata->reg) + return -ENODEV; + + error = cpcap_get_vendor(ddata->dev, ddata->reg, &ddata->vendor); + if (error) + return error; + + platform_set_drvdata(pdev, indio_dev); + + ddata->irq = platform_get_irq_byname(pdev, "adcdone"); + if (!ddata->irq) + return -ENODEV; + + error = devm_request_threaded_irq(&pdev->dev, ddata->irq, NULL, + cpcap_adc_irq_thread, + IRQF_TRIGGER_NONE, + "cpcap-adc", indio_dev); + if (error) { + dev_err(&pdev->dev, "could not get irq: %i\n", + error); + + return error; + } + + error = cpcap_adc_calibrate(ddata); + if (error) + return error; + + dev_info(&pdev->dev, "CPCAP ADC device probed\n"); + + return devm_iio_device_register(&pdev->dev, indio_dev); +} + +static struct platform_driver cpcap_adc_driver = { + .driver = { + .name = "cpcap_adc", + .of_match_table = of_match_ptr(cpcap_adc_id_table), + }, + .probe = cpcap_adc_probe, +}; + +module_platform_driver(cpcap_adc_driver); + +MODULE_ALIAS("platform:cpcap_adc"); +MODULE_DESCRIPTION("CPCAP ADC driver"); +MODULE_AUTHOR("Tony Lindgren <tony@atomide.com"); +MODULE_LICENSE("GPL v2");
On Motorola phones like droid 4 there is a custom CPCAP PMIC. This PMIC has ADCs that are used for battery charging and USB PHY VBUS and ID pin detection. Unfortunately the only documentation for this ADC seems to be the Motorola mapphone Linux kernel tree. I have tested that reading raw and scaled values works, but I have not used the timed sampling that the ADC seems to support. Let's add a minimal support for it so we can eventually provide IIO channels for the related battery charging and USB PHY drivers. Cc: devicetree@vger.kernel.org Cc: Marcel Partap <mpartap@gmx.net> Cc: Michael Scott <michael.scott@linaro.org> Cc: Sebastian Reichel <sre@kernel.org> Signed-off-by: Tony Lindgren <tony@atomide.com> --- Changes since v2: - Simplify things further by using channel based indexing and remove more drivers specific enumerations Changes since v1: - Fix numerous issues pointed out by Peter Meerwald-Stadler <pmeerw@pmeerw.net> and Jonathan Cameron <jic23@kernel.org> - Simplify things further by limiting read functions to a single channel instead of a bank and got rid of the driver specific cpcap_adc_conv_type in favor of IIO generic types --- .../devicetree/bindings/iio/adc/cpcap-adc.txt | 18 + drivers/iio/adc/Kconfig | 11 + drivers/iio/adc/Makefile | 1 + drivers/iio/adc/cpcap-adc.c | 1007 ++++++++++++++++++++ 4 files changed, 1037 insertions(+) create mode 100644 Documentation/devicetree/bindings/iio/adc/cpcap-adc.txt create mode 100644 drivers/iio/adc/cpcap-adc.c