From patchwork Tue Jan 17 13:18:06 2017 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Dave Gerlach X-Patchwork-Id: 716183 Return-Path: X-Original-To: incoming-dt@patchwork.ozlabs.org Delivered-To: patchwork-incoming-dt@bilbo.ozlabs.org Received: from vger.kernel.org (vger.kernel.org [209.132.180.67]) by ozlabs.org (Postfix) with ESMTP id 3v2rMh3htZz9t8j for ; Wed, 18 Jan 2017 00:21:04 +1100 (AEDT) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1751129AbdAQNU5 (ORCPT ); Tue, 17 Jan 2017 08:20:57 -0500 Received: from fllnx209.ext.ti.com ([198.47.19.16]:45797 "EHLO fllnx209.ext.ti.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1750962AbdAQNUv (ORCPT ); Tue, 17 Jan 2017 08:20:51 -0500 Received: from dlelxv90.itg.ti.com ([172.17.2.17]) by fllnx209.ext.ti.com (8.15.1/8.15.1) with ESMTP id v0HDITTp004380; Tue, 17 Jan 2017 07:18:29 -0600 Received: from DFLE72.ent.ti.com (dfle72.ent.ti.com [128.247.5.109]) by dlelxv90.itg.ti.com (8.14.3/8.13.8) with ESMTP id v0HDIOXL004431; Tue, 17 Jan 2017 07:18:24 -0600 Received: from dlep33.itg.ti.com (157.170.170.75) by DFLE72.ent.ti.com (128.247.5.109) with Microsoft SMTP Server id 14.3.294.0; Tue, 17 Jan 2017 07:18:23 -0600 Received: from legion.dal.design.ti.com (legion.dal.design.ti.com [128.247.22.53]) by dlep33.itg.ti.com (8.14.3/8.13.8) with ESMTP id v0HDINvn013189; Tue, 17 Jan 2017 07:18:23 -0600 Received: from localhost (uda0274052.am.dhcp.ti.com [128.247.83.19]) by legion.dal.design.ti.com (8.11.7p1+Sun/8.11.7) with ESMTP id v0HDIN320457; Tue, 17 Jan 2017 07:18:23 -0600 (CST) From: Dave Gerlach To: Rob Herring , Viresh Kumar , "Rafael J . Wysocki" CC: , , , , Tony Lindgren , Dave Gerlach , Nishanth Menon Subject: [PATCH v4 2/4] Documentation: dt: add bindings for ti-cpufreq Date: Tue, 17 Jan 2017 07:18:06 -0600 Message-ID: <20170117131808.29798-3-d-gerlach@ti.com> X-Mailer: git-send-email 2.11.0 In-Reply-To: <20170117131808.29798-1-d-gerlach@ti.com> References: <20170117131808.29798-1-d-gerlach@ti.com> MIME-Version: 1.0 Sender: devicetree-owner@vger.kernel.org Precedence: bulk List-ID: X-Mailing-List: devicetree@vger.kernel.org Add the device tree bindings document for the TI CPUFreq/OPP driver on AM33xx, AM43xx, DRA7xx, and AM57xx SoCs. The operating-points-v2 binding allows us to provide an opp-supported-hw property for each OPP to define when it is available. This driver is responsible for reading and parsing registers to determine which OPPs can be selectively enabled based on the specific SoC in use by matching against the opp-supported-hw data. Signed-off-by: Dave Gerlach Acked-by: Viresh Kumar --- v3->v4: Update to simplify binding, only use "syscon" now to pass control module register space and let driver handle offsets. .../devicetree/bindings/cpufreq/ti-cpufreq.txt | 128 +++++++++++++++++++++ 1 file changed, 128 insertions(+) create mode 100644 Documentation/devicetree/bindings/cpufreq/ti-cpufreq.txt diff --git a/Documentation/devicetree/bindings/cpufreq/ti-cpufreq.txt b/Documentation/devicetree/bindings/cpufreq/ti-cpufreq.txt new file mode 100644 index 000000000000..58efa4c72545 --- /dev/null +++ b/Documentation/devicetree/bindings/cpufreq/ti-cpufreq.txt @@ -0,0 +1,128 @@ +TI CPUFreq and OPP bindings +================================ + +Certain TI SoCs, like those in the am335x, am437x, am57xx, and dra7xx +families support different OPPs depending on the silicon variant in use. +The ti-cpufreq driver can use revision and an efuse value from the SoC to +provide the OPP framework with supported hardware information. This is +used to determine which OPPs from the operating-points-v2 table get enabled +when it is parsed by the OPP framework. + +Required properties: +-------------------- +In 'cpus' nodes: +- operating-points-v2: Phandle to the operating-points-v2 table to use. + +In 'operating-points-v2' table: +- compatible: Should be + - 'operating-points-v2-ti-cpu' for am335x, am43xx, and dra7xx/am57xx SoCs +- syscon: A phandle pointing to a syscon node representing the control module + register space of the SoC. + +Optional properties: +-------------------- +For each opp entry in 'operating-points-v2' table: +- opp-supported-hw: Two bitfields indicating: + 1. Which revision of the SoC the OPP is supported by + 2. Which eFuse bits indicate this OPP is available + + A bitwise AND is performed against these values and if any bit + matches, the OPP gets enabled. + +Example: +-------- + +/* From arch/arm/boot/dts/am33xx.dtsi */ +cpus { + #address-cells = <1>; + #size-cells = <0>; + cpu@0 { + compatible = "arm,cortex-a8"; + device_type = "cpu"; + reg = <0>; + + operating-points-v2 = <&cpu0_opp_table>; + + clocks = <&dpll_mpu_ck>; + clock-names = "cpu"; + + clock-latency = <300000>; /* From omap-cpufreq driver */ + }; +}; + +/* + * cpu0 has different OPPs depending on SoC revision and some on revisions + * 0x2 and 0x4 have eFuse bits that indicate if they are available or not + */ +cpu0_opp_table: opp_table0 { + compatible = "operating-points-v2-ti-cpu"; + syscon = <&scm_conf>; + + /* + * The three following nodes are marked with opp-suspend + * because they can not be enabled simultaneously on a + * single SoC. + */ + opp50@300000000 { + opp-hz = /bits/ 64 <300000000>; + opp-microvolt = <950000 931000 969000>; + opp-supported-hw = <0x06 0x0010>; + opp-suspend; + }; + + opp100@275000000 { + opp-hz = /bits/ 64 <275000000>; + opp-microvolt = <1100000 1078000 1122000>; + opp-supported-hw = <0x01 0x00FF>; + opp-suspend; + }; + + opp100@300000000 { + opp-hz = /bits/ 64 <300000000>; + opp-microvolt = <1100000 1078000 1122000>; + opp-supported-hw = <0x06 0x0020>; + opp-suspend; + }; + + opp100@500000000 { + opp-hz = /bits/ 64 <500000000>; + opp-microvolt = <1100000 1078000 1122000>; + opp-supported-hw = <0x01 0xFFFF>; + }; + + opp100@600000000 { + opp-hz = /bits/ 64 <600000000>; + opp-microvolt = <1100000 1078000 1122000>; + opp-supported-hw = <0x06 0x0040>; + }; + + opp120@600000000 { + opp-hz = /bits/ 64 <600000000>; + opp-microvolt = <1200000 1176000 1224000>; + opp-supported-hw = <0x01 0xFFFF>; + }; + + opp120@720000000 { + opp-hz = /bits/ 64 <720000000>; + opp-microvolt = <1200000 1176000 1224000>; + opp-supported-hw = <0x06 0x0080>; + }; + + oppturbo@720000000 { + opp-hz = /bits/ 64 <720000000>; + opp-microvolt = <1260000 1234800 1285200>; + opp-supported-hw = <0x01 0xFFFF>; + }; + + oppturbo@800000000 { + opp-hz = /bits/ 64 <800000000>; + opp-microvolt = <1260000 1234800 1285200>; + opp-supported-hw = <0x06 0x0100>; + }; + + oppnitro@1000000000 { + opp-hz = /bits/ 64 <1000000000>; + opp-microvolt = <1325000 1298500 1351500>; + opp-supported-hw = <0x04 0x0200>; + }; +};