diff mbox

[v4,4/5] mfd: dt: Add bindings for the Aspeed LPC Host Controller (LHC)

Message ID 20161220071535.27542-5-andrew@aj.id.au
State Not Applicable, archived
Headers show

Commit Message

Andrew Jeffery Dec. 20, 2016, 7:15 a.m. UTC
The LPC bus pinmux configuration on fifth generation Aspeed SoCs depends
on bits in both the System Control Unit and the LPC Host Controller.

The Aspeed LPC Host Controller is described as a child node of the
LPC host-range syscon device for arbitration of access by the host
controller and pinmux drivers.

Signed-off-by: Andrew Jeffery <andrew@aj.id.au>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
---

Linus: I've retained your r-b tag I don't think the addition of the ast2400
compatible string will fuss you. Please let me know if you feel this is
inappropriate.

 .../devicetree/bindings/mfd/aspeed-lpc.txt         | 26 ++++++++++++++++++++++
 1 file changed, 26 insertions(+)

Comments

Rob Herring Dec. 22, 2016, 9 p.m. UTC | #1
On Tue, Dec 20, 2016 at 05:45:34PM +1030, Andrew Jeffery wrote:
> The LPC bus pinmux configuration on fifth generation Aspeed SoCs depends
> on bits in both the System Control Unit and the LPC Host Controller.
> 
> The Aspeed LPC Host Controller is described as a child node of the
> LPC host-range syscon device for arbitration of access by the host
> controller and pinmux drivers.
> 
> Signed-off-by: Andrew Jeffery <andrew@aj.id.au>
> Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
> ---
> 
> Linus: I've retained your r-b tag I don't think the addition of the ast2400
> compatible string will fuss you. Please let me know if you feel this is
> inappropriate.
> 
>  .../devicetree/bindings/mfd/aspeed-lpc.txt         | 26 ++++++++++++++++++++++
>  1 file changed, 26 insertions(+)

Acked-by: Rob Herring <robh@kernel.org>
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Lee Jones Jan. 4, 2017, 11:36 a.m. UTC | #2
On Tue, 20 Dec 2016, Andrew Jeffery wrote:

> The LPC bus pinmux configuration on fifth generation Aspeed SoCs depends
> on bits in both the System Control Unit and the LPC Host Controller.
> 
> The Aspeed LPC Host Controller is described as a child node of the
> LPC host-range syscon device for arbitration of access by the host
> controller and pinmux drivers.
> 
> Signed-off-by: Andrew Jeffery <andrew@aj.id.au>
> Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
> ---
> 
> Linus: I've retained your r-b tag I don't think the addition of the ast2400
> compatible string will fuss you. Please let me know if you feel this is
> inappropriate.
> 
>  .../devicetree/bindings/mfd/aspeed-lpc.txt         | 26 ++++++++++++++++++++++
>  1 file changed, 26 insertions(+)

Applied, thanks.

> diff --git a/Documentation/devicetree/bindings/mfd/aspeed-lpc.txt b/Documentation/devicetree/bindings/mfd/aspeed-lpc.txt
> index a97131aba446..514d82ced95b 100644
> --- a/Documentation/devicetree/bindings/mfd/aspeed-lpc.txt
> +++ b/Documentation/devicetree/bindings/mfd/aspeed-lpc.txt
> @@ -109,3 +109,29 @@ lpc: lpc@1e789000 {
>  	};
>  };
>  
> +Host Node Children
> +==================
> +
> +LPC Host Controller
> +-------------------
> +
> +The Aspeed LPC Host Controller configures the Low Pin Count (LPC) bus behaviour
> +between the host and the baseboard management controller. The registers exist
> +in the "host" portion of the Aspeed LPC controller, which must be the parent of
> +the LPC host controller node.
> +
> +Required properties:
> +
> +- compatible:	One of:
> +		"aspeed,ast2400-lhc";
> +		"aspeed,ast2500-lhc";
> +
> +- reg:		contains offset/length values of the LHC memory regions. In the
> +		AST2400 and AST2500 there are two regions.
> +
> +Example:
> +
> +lhc: lhc@20 {
> +	compatible = "aspeed,ast2500-lhc";
> +	reg = <0x20 0x24 0x48 0x8>;
> +};
diff mbox

Patch

diff --git a/Documentation/devicetree/bindings/mfd/aspeed-lpc.txt b/Documentation/devicetree/bindings/mfd/aspeed-lpc.txt
index a97131aba446..514d82ced95b 100644
--- a/Documentation/devicetree/bindings/mfd/aspeed-lpc.txt
+++ b/Documentation/devicetree/bindings/mfd/aspeed-lpc.txt
@@ -109,3 +109,29 @@  lpc: lpc@1e789000 {
 	};
 };
 
+Host Node Children
+==================
+
+LPC Host Controller
+-------------------
+
+The Aspeed LPC Host Controller configures the Low Pin Count (LPC) bus behaviour
+between the host and the baseboard management controller. The registers exist
+in the "host" portion of the Aspeed LPC controller, which must be the parent of
+the LPC host controller node.
+
+Required properties:
+
+- compatible:	One of:
+		"aspeed,ast2400-lhc";
+		"aspeed,ast2500-lhc";
+
+- reg:		contains offset/length values of the LHC memory regions. In the
+		AST2400 and AST2500 there are two regions.
+
+Example:
+
+lhc: lhc@20 {
+	compatible = "aspeed,ast2500-lhc";
+	reg = <0x20 0x24 0x48 0x8>;
+};