| Message ID | 20161116115507.24220-1-hdegoede@redhat.com |
|---|---|
| State | Not Applicable, archived |
| Headers | show |
On Wed, Nov 16, 2016 at 12:55:07PM +0100, Hans de Goede wrote: > On some tablets the touchscreen controller is powered by separate > regulators, add support for this. > > Signed-off-by: Hans de Goede <hdegoede@redhat.com> > Acked-by: Rob Herring <robh@kernel.org> > --- > Changes in v2: > -Use devm_regulator_bulk_get() and friends > -Use devm_add_action_or_reset() to disable the regulator > --- > .../bindings/input/touchscreen/silead_gsl1680.txt | 2 ++ > drivers/input/touchscreen/silead.c | 29 ++++++++++++++++++++++ > 2 files changed, 31 insertions(+) > > diff --git a/Documentation/devicetree/bindings/input/touchscreen/silead_gsl1680.txt b/Documentation/devicetree/bindings/input/touchscreen/silead_gsl1680.txt > index e844c3f..b726823 100644 > --- a/Documentation/devicetree/bindings/input/touchscreen/silead_gsl1680.txt > +++ b/Documentation/devicetree/bindings/input/touchscreen/silead_gsl1680.txt > @@ -22,6 +22,8 @@ Optional properties: > - touchscreen-inverted-y : See touchscreen.txt > - touchscreen-swapped-x-y : See touchscreen.txt > - silead,max-fingers : maximum number of fingers the touchscreen can detect > +- vddio-supply : regulator phandle for controller VDDIO > +- avdd-supply : regulator phandle for controller AVDD > > Example: > > diff --git a/drivers/input/touchscreen/silead.c b/drivers/input/touchscreen/silead.c > index f502c84..404830a 100644 > --- a/drivers/input/touchscreen/silead.c > +++ b/drivers/input/touchscreen/silead.c > @@ -29,6 +29,7 @@ > #include <linux/input/touchscreen.h> > #include <linux/pm.h> > #include <linux/irq.h> > +#include <linux/regulator/consumer.h> > > #include <asm/unaligned.h> > > @@ -73,6 +74,7 @@ struct silead_ts_data { > struct i2c_client *client; > struct gpio_desc *gpio_power; > struct input_dev *input; > + struct regulator_bulk_data regulators[2]; > char fw_name[64]; > struct touchscreen_properties prop; > u32 max_fingers; > @@ -433,6 +435,13 @@ static int silead_ts_set_default_fw_name(struct silead_ts_data *data, > } > #endif > > +static void silead_disable_regulator(void *arg) > +{ > + struct silead_ts_data *data = arg; > + > + regulator_bulk_disable(ARRAY_SIZE(data->regulators), data->regulators); > +} > + > static int silead_ts_probe(struct i2c_client *client, > const struct i2c_device_id *id) > { > @@ -465,6 +474,26 @@ static int silead_ts_probe(struct i2c_client *client, > if (client->irq <= 0) > return -ENODEV; > > + data->regulators[0].supply = "vddio"; > + data->regulators[1].supply = "avdd"; > + error = devm_regulator_bulk_get(dev, ARRAY_SIZE(data->regulators), > + data->regulators); > + if (error) > + return error; > + > + /* > + * Enable regulators at probe and disable them at remove, we need > + * to keep the chip powered otherwise it forgets its firmware. > + */ Hmm, this burns power though. Why can't we reload firmware on resume (it should be already cached)? Does it take too long? Thanks. > + error = regulator_bulk_enable(ARRAY_SIZE(data->regulators), > + data->regulators); > + if (error) > + return error; > + > + error = devm_add_action_or_reset(dev, silead_disable_regulator, data); > + if (error) > + return error; > + > /* Power GPIO pin */ > data->gpio_power = devm_gpiod_get_optional(dev, "power", GPIOD_OUT_LOW); > if (IS_ERR(data->gpio_power)) { > -- > 2.9.3 >
HI, On 16-11-16 18:51, Dmitry Torokhov wrote: > On Wed, Nov 16, 2016 at 12:55:07PM +0100, Hans de Goede wrote: >> On some tablets the touchscreen controller is powered by separate >> regulators, add support for this. >> >> Signed-off-by: Hans de Goede <hdegoede@redhat.com> >> Acked-by: Rob Herring <robh@kernel.org> >> --- >> Changes in v2: >> -Use devm_regulator_bulk_get() and friends >> -Use devm_add_action_or_reset() to disable the regulator >> --- >> .../bindings/input/touchscreen/silead_gsl1680.txt | 2 ++ >> drivers/input/touchscreen/silead.c | 29 ++++++++++++++++++++++ >> 2 files changed, 31 insertions(+) >> >> diff --git a/Documentation/devicetree/bindings/input/touchscreen/silead_gsl1680.txt b/Documentation/devicetree/bindings/input/touchscreen/silead_gsl1680.txt >> index e844c3f..b726823 100644 >> --- a/Documentation/devicetree/bindings/input/touchscreen/silead_gsl1680.txt >> +++ b/Documentation/devicetree/bindings/input/touchscreen/silead_gsl1680.txt >> @@ -22,6 +22,8 @@ Optional properties: >> - touchscreen-inverted-y : See touchscreen.txt >> - touchscreen-swapped-x-y : See touchscreen.txt >> - silead,max-fingers : maximum number of fingers the touchscreen can detect >> +- vddio-supply : regulator phandle for controller VDDIO >> +- avdd-supply : regulator phandle for controller AVDD >> >> Example: >> >> diff --git a/drivers/input/touchscreen/silead.c b/drivers/input/touchscreen/silead.c >> index f502c84..404830a 100644 >> --- a/drivers/input/touchscreen/silead.c >> +++ b/drivers/input/touchscreen/silead.c >> @@ -29,6 +29,7 @@ >> #include <linux/input/touchscreen.h> >> #include <linux/pm.h> >> #include <linux/irq.h> >> +#include <linux/regulator/consumer.h> >> >> #include <asm/unaligned.h> >> >> @@ -73,6 +74,7 @@ struct silead_ts_data { >> struct i2c_client *client; >> struct gpio_desc *gpio_power; >> struct input_dev *input; >> + struct regulator_bulk_data regulators[2]; >> char fw_name[64]; >> struct touchscreen_properties prop; >> u32 max_fingers; >> @@ -433,6 +435,13 @@ static int silead_ts_set_default_fw_name(struct silead_ts_data *data, >> } >> #endif >> >> +static void silead_disable_regulator(void *arg) >> +{ >> + struct silead_ts_data *data = arg; >> + >> + regulator_bulk_disable(ARRAY_SIZE(data->regulators), data->regulators); >> +} >> + >> static int silead_ts_probe(struct i2c_client *client, >> const struct i2c_device_id *id) >> { >> @@ -465,6 +474,26 @@ static int silead_ts_probe(struct i2c_client *client, >> if (client->irq <= 0) >> return -ENODEV; >> >> + data->regulators[0].supply = "vddio"; >> + data->regulators[1].supply = "avdd"; >> + error = devm_regulator_bulk_get(dev, ARRAY_SIZE(data->regulators), >> + data->regulators); >> + if (error) >> + return error; >> + >> + /* >> + * Enable regulators at probe and disable them at remove, we need >> + * to keep the chip powered otherwise it forgets its firmware. >> + */ > > Hmm, this burns power though. Why can't we reload firmware on resume (it > should be already cached)? We already put the device in low-power mode using the power pin. Of the 20 or so different tablets I've with this touchscreen controller only 2 actually have a separate regulator for the controller, so I do not believe that powering down the regulator will be a big win, otherwise all tablets would have had this. > Does it take too long? It is a couple of kB written one 32-bit word at a time over i2c, so it's not fast. Regards, Hans > > Thanks. > >> + error = regulator_bulk_enable(ARRAY_SIZE(data->regulators), >> + data->regulators); >> + if (error) >> + return error; >> + >> + error = devm_add_action_or_reset(dev, silead_disable_regulator, data); >> + if (error) >> + return error; >> + >> /* Power GPIO pin */ >> data->gpio_power = devm_gpiod_get_optional(dev, "power", GPIOD_OUT_LOW); >> if (IS_ERR(data->gpio_power)) { >> -- >> 2.9.3 >> > -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On Wed, Nov 16, 2016 at 07:58:26PM +0100, Hans de Goede wrote: > HI, > > On 16-11-16 18:51, Dmitry Torokhov wrote: > >On Wed, Nov 16, 2016 at 12:55:07PM +0100, Hans de Goede wrote: > >>On some tablets the touchscreen controller is powered by separate > >>regulators, add support for this. > >> > >>Signed-off-by: Hans de Goede <hdegoede@redhat.com> > >>Acked-by: Rob Herring <robh@kernel.org> > >>--- > >>Changes in v2: > >>-Use devm_regulator_bulk_get() and friends > >>-Use devm_add_action_or_reset() to disable the regulator > >>--- > >> .../bindings/input/touchscreen/silead_gsl1680.txt | 2 ++ > >> drivers/input/touchscreen/silead.c | 29 ++++++++++++++++++++++ > >> 2 files changed, 31 insertions(+) > >> > >>diff --git a/Documentation/devicetree/bindings/input/touchscreen/silead_gsl1680.txt b/Documentation/devicetree/bindings/input/touchscreen/silead_gsl1680.txt > >>index e844c3f..b726823 100644 > >>--- a/Documentation/devicetree/bindings/input/touchscreen/silead_gsl1680.txt > >>+++ b/Documentation/devicetree/bindings/input/touchscreen/silead_gsl1680.txt > >>@@ -22,6 +22,8 @@ Optional properties: > >> - touchscreen-inverted-y : See touchscreen.txt > >> - touchscreen-swapped-x-y : See touchscreen.txt > >> - silead,max-fingers : maximum number of fingers the touchscreen can detect > >>+- vddio-supply : regulator phandle for controller VDDIO > >>+- avdd-supply : regulator phandle for controller AVDD > >> > >> Example: > >> > >>diff --git a/drivers/input/touchscreen/silead.c b/drivers/input/touchscreen/silead.c > >>index f502c84..404830a 100644 > >>--- a/drivers/input/touchscreen/silead.c > >>+++ b/drivers/input/touchscreen/silead.c > >>@@ -29,6 +29,7 @@ > >> #include <linux/input/touchscreen.h> > >> #include <linux/pm.h> > >> #include <linux/irq.h> > >>+#include <linux/regulator/consumer.h> > >> > >> #include <asm/unaligned.h> > >> > >>@@ -73,6 +74,7 @@ struct silead_ts_data { > >> struct i2c_client *client; > >> struct gpio_desc *gpio_power; > >> struct input_dev *input; > >>+ struct regulator_bulk_data regulators[2]; > >> char fw_name[64]; > >> struct touchscreen_properties prop; > >> u32 max_fingers; > >>@@ -433,6 +435,13 @@ static int silead_ts_set_default_fw_name(struct silead_ts_data *data, > >> } > >> #endif > >> > >>+static void silead_disable_regulator(void *arg) > >>+{ > >>+ struct silead_ts_data *data = arg; > >>+ > >>+ regulator_bulk_disable(ARRAY_SIZE(data->regulators), data->regulators); > >>+} > >>+ > >> static int silead_ts_probe(struct i2c_client *client, > >> const struct i2c_device_id *id) > >> { > >>@@ -465,6 +474,26 @@ static int silead_ts_probe(struct i2c_client *client, > >> if (client->irq <= 0) > >> return -ENODEV; > >> > >>+ data->regulators[0].supply = "vddio"; > >>+ data->regulators[1].supply = "avdd"; > >>+ error = devm_regulator_bulk_get(dev, ARRAY_SIZE(data->regulators), > >>+ data->regulators); > >>+ if (error) > >>+ return error; > >>+ > >>+ /* > >>+ * Enable regulators at probe and disable them at remove, we need > >>+ * to keep the chip powered otherwise it forgets its firmware. > >>+ */ > > > >Hmm, this burns power though. Why can't we reload firmware on resume (it > >should be already cached)? > > We already put the device in low-power mode using the power pin. Of the > 20 or so different tablets I've with this touchscreen controller only > 2 actually have a separate regulator for the controller, so I do not > believe that powering down the regulator will be a big win, otherwise > all tablets would have had this. > > > Does it take too long? > > It is a couple of kB written one 32-bit word at a time over i2c, so > it's not fast. OK, fair enough. Applied, thank you.
diff --git a/Documentation/devicetree/bindings/input/touchscreen/silead_gsl1680.txt b/Documentation/devicetree/bindings/input/touchscreen/silead_gsl1680.txt index e844c3f..b726823 100644 --- a/Documentation/devicetree/bindings/input/touchscreen/silead_gsl1680.txt +++ b/Documentation/devicetree/bindings/input/touchscreen/silead_gsl1680.txt @@ -22,6 +22,8 @@ Optional properties: - touchscreen-inverted-y : See touchscreen.txt - touchscreen-swapped-x-y : See touchscreen.txt - silead,max-fingers : maximum number of fingers the touchscreen can detect +- vddio-supply : regulator phandle for controller VDDIO +- avdd-supply : regulator phandle for controller AVDD Example: diff --git a/drivers/input/touchscreen/silead.c b/drivers/input/touchscreen/silead.c index f502c84..404830a 100644 --- a/drivers/input/touchscreen/silead.c +++ b/drivers/input/touchscreen/silead.c @@ -29,6 +29,7 @@ #include <linux/input/touchscreen.h> #include <linux/pm.h> #include <linux/irq.h> +#include <linux/regulator/consumer.h> #include <asm/unaligned.h> @@ -73,6 +74,7 @@ struct silead_ts_data { struct i2c_client *client; struct gpio_desc *gpio_power; struct input_dev *input; + struct regulator_bulk_data regulators[2]; char fw_name[64]; struct touchscreen_properties prop; u32 max_fingers; @@ -433,6 +435,13 @@ static int silead_ts_set_default_fw_name(struct silead_ts_data *data, } #endif +static void silead_disable_regulator(void *arg) +{ + struct silead_ts_data *data = arg; + + regulator_bulk_disable(ARRAY_SIZE(data->regulators), data->regulators); +} + static int silead_ts_probe(struct i2c_client *client, const struct i2c_device_id *id) { @@ -465,6 +474,26 @@ static int silead_ts_probe(struct i2c_client *client, if (client->irq <= 0) return -ENODEV; + data->regulators[0].supply = "vddio"; + data->regulators[1].supply = "avdd"; + error = devm_regulator_bulk_get(dev, ARRAY_SIZE(data->regulators), + data->regulators); + if (error) + return error; + + /* + * Enable regulators at probe and disable them at remove, we need + * to keep the chip powered otherwise it forgets its firmware. + */ + error = regulator_bulk_enable(ARRAY_SIZE(data->regulators), + data->regulators); + if (error) + return error; + + error = devm_add_action_or_reset(dev, silead_disable_regulator, data); + if (error) + return error; + /* Power GPIO pin */ data->gpio_power = devm_gpiod_get_optional(dev, "power", GPIOD_OUT_LOW); if (IS_ERR(data->gpio_power)) {