From patchwork Thu Oct 27 21:41:30 2016 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Dave Gerlach X-Patchwork-Id: 687963 Return-Path: X-Original-To: incoming-dt@patchwork.ozlabs.org Delivered-To: patchwork-incoming-dt@bilbo.ozlabs.org Received: from vger.kernel.org (vger.kernel.org [209.132.180.67]) by ozlabs.org (Postfix) with ESMTP id 3t4gMv3Swwz9sR9 for ; Fri, 28 Oct 2016 08:42:19 +1100 (AEDT) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S965106AbcJ0VmQ (ORCPT ); Thu, 27 Oct 2016 17:42:16 -0400 Received: from arroyo.ext.ti.com ([198.47.19.12]:49253 "EHLO arroyo.ext.ti.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S964833AbcJ0VmO (ORCPT ); Thu, 27 Oct 2016 17:42:14 -0400 Received: from dlelxv90.itg.ti.com ([172.17.2.17]) by arroyo.ext.ti.com (8.13.7/8.13.7) with ESMTP id u9RLfdwc008559; Thu, 27 Oct 2016 16:41:39 -0500 Received: from DLEE71.ent.ti.com (dlee71.ent.ti.com [157.170.170.114]) by dlelxv90.itg.ti.com (8.14.3/8.13.8) with ESMTP id u9RLfdCB017913; Thu, 27 Oct 2016 16:41:39 -0500 Received: from dflp33.itg.ti.com (10.64.6.16) by DLEE71.ent.ti.com (157.170.170.114) with Microsoft SMTP Server id 14.3.294.0; Thu, 27 Oct 2016 16:41:39 -0500 Received: from legion.dal.design.ti.com (legion.dal.design.ti.com [128.247.22.53]) by dflp33.itg.ti.com (8.14.3/8.13.8) with ESMTP id u9RLfdLC019134; Thu, 27 Oct 2016 16:41:39 -0500 Received: from localhost (uda0274052.am.dhcp.ti.com [128.247.83.19]) by legion.dal.design.ti.com (8.11.7p1+Sun/8.11.7) with ESMTP id u9RLfd317114; Thu, 27 Oct 2016 16:41:39 -0500 (CDT) From: Dave Gerlach To: Viresh Kumar , Rob Herring CC: , , , , "Rafael J . Wysocki" , Tony Lindgren , Nishanth Menon , Dave Gerlach Subject: [PATCH v3 2/3] Documentation: dt: add bindings for ti-cpufreq Date: Thu, 27 Oct 2016 16:41:30 -0500 Message-ID: <20161027214131.1725-3-d-gerlach@ti.com> X-Mailer: git-send-email 2.9.3 In-Reply-To: <20161027214131.1725-1-d-gerlach@ti.com> References: <20161027214131.1725-1-d-gerlach@ti.com> MIME-Version: 1.0 Sender: devicetree-owner@vger.kernel.org Precedence: bulk List-ID: X-Mailing-List: devicetree@vger.kernel.org Add the device tree bindings document for the TI CPUFreq/OPP driver on AM33xx and AM43xx SoCs. The operating-points-v2 binding allows us to provide an opp-supported-hw property for each OPP to define when it is available. This driver is responsible for reading and parsing registers to determine which OPPs can be selectively enabled based on the specific SoC in use by matching against the opp-supported-hw data. Signed-off-by: Dave Gerlach --- v2->v3: - Move ti,syscon-* properties under opp table instead of cpu node, as that is a better location for them. - For the opp table do not use platform specific compatible strings but instead a operating-points-v2-ti-cpu .../devicetree/bindings/cpufreq/ti-cpufreq.txt | 132 +++++++++++++++++++++ 1 file changed, 132 insertions(+) create mode 100644 Documentation/devicetree/bindings/cpufreq/ti-cpufreq.txt diff --git a/Documentation/devicetree/bindings/cpufreq/ti-cpufreq.txt b/Documentation/devicetree/bindings/cpufreq/ti-cpufreq.txt new file mode 100644 index 000000000000..467ad29c75c9 --- /dev/null +++ b/Documentation/devicetree/bindings/cpufreq/ti-cpufreq.txt @@ -0,0 +1,132 @@ +TI CPUFreq and OPP bindings +================================ + +Certain TI SoCs, like those in the am335x, am437x, am57xx, and dra7xx +families support different OPPs depending on the silicon variant in use. +The ti_cpufreq driver can use revision and an efuse value from the SoC to +provide the OPP framework with supported hardware information. This is +used to determine which OPPs from the operating-points-v2 table get enabled +when it is parsed by the OPP framework. + +Required properties: +-------------------- +In 'cpus' nodes: +- operating-points-v2: Phandle to the operating-points-v2 table to use. + +In 'operating-points-v2' table: +- compatible: Should be 'operating-points-v2-ti-cpu' for am335x, am43xx, + and dra7xx/am57xx SoCs +- ti,syscon-efuse: Syscon phandle, offset to efuse register, efuse register + mask, and efuse register shift to get the relevant bits + that describe OPP availability. +- ti,syscon-rev: Syscon and offset used to look up revision value on SoC. + +Optional properties: +-------------------- +For each opp entry in 'operating-points-v2' table: +- opp-supported-hw: Two bitfields indicating: + 1. Which revision of the SoC the OPP is supported by + 2. Which eFuse bits indicate this OPP is available + + A bitwise AND is performed against these values and if any bit + matches, the OPP gets enabled. Not providing the property for an + entry indicates that an OPP is always supported. + +Example: +-------- + +/* From arch/arm/boot/dts/am33xx.dtsi */ +cpus { + #address-cells = <1>; + #size-cells = <0>; + cpu@0 { + compatible = "arm,cortex-a8"; + device_type = "cpu"; + reg = <0>; + + operating-points-v2 = <&cpu0_opp_table>; + + clocks = <&dpll_mpu_ck>; + clock-names = "cpu"; + + clock-latency = <300000>; /* From omap-cpufreq driver */ + }; +}; + +/* + * cpu0 has different OPPs depending on SoC revision and some on revisions + * 0x2 and 0x4 have eFuse bits that indicate if they are available or not + */ +cpu0_opp_table: opp_table0 { + compatible = "operating-points-v2-ti-am3352-cpu"; + ti,syscon-efuse = <&scm_conf 0x7fc 0x1fff 0>; + ti,syscon-rev = <&scm_conf 0x600>; + + /* + * The three following nodes are marked with opp-suspend + * because they can not be enabled simultaneously on a + * single SoC. + */ + opp50@300000000 { + opp-hz = /bits/ 64 <300000000>; + opp-microvolt = <950000 931000 969000>; + opp-supported-hw = <0x06 0x0010>; + opp-suspend; + }; + + opp100@275000000 { + opp-hz = /bits/ 64 <275000000>; + opp-microvolt = <1100000 1078000 1122000>; + opp-supported-hw = <0x01 0x00FF>; + opp-suspend; + }; + + opp100@300000000 { + opp-hz = /bits/ 64 <300000000>; + opp-microvolt = <1100000 1078000 1122000>; + opp-supported-hw = <0x06 0x0020>; + opp-suspend; + }; + + opp100@500000000 { + opp-hz = /bits/ 64 <500000000>; + opp-microvolt = <1100000 1078000 1122000>; + opp-supported-hw = <0x01 0xFFFF>; + }; + + opp100@600000000 { + opp-hz = /bits/ 64 <600000000>; + opp-microvolt = <1100000 1078000 1122000>; + opp-supported-hw = <0x06 0x0040>; + }; + + opp120@600000000 { + opp-hz = /bits/ 64 <600000000>; + opp-microvolt = <1200000 1176000 1224000>; + opp-supported-hw = <0x01 0xFFFF>; + }; + + opp120@720000000 { + opp-hz = /bits/ 64 <720000000>; + opp-microvolt = <1200000 1176000 1224000>; + opp-supported-hw = <0x06 0x0080>; + }; + + oppturbo@720000000 { + opp-hz = /bits/ 64 <720000000>; + opp-microvolt = <1260000 1234800 1285200>; + opp-supported-hw = <0x01 0xFFFF>; + }; + + oppturbo@800000000 { + opp-hz = /bits/ 64 <800000000>; + opp-microvolt = <1260000 1234800 1285200>; + opp-supported-hw = <0x06 0x0100>; + }; + + oppnitro@1000000000 { + opp-hz = /bits/ 64 <1000000000>; + opp-microvolt = <1325000 1298500 1351500>; + opp-supported-hw = <0x04 0x0200>; + }; +};