diff mbox series

[v5,3/8] dt-bindings: imx6q-pcie: Add PHY phandles and name properties

Message ID 1635820355-27009-4-git-send-email-hongxing.zhu@nxp.com
State Not Applicable, archived
Headers show
Series Add the imx8m pcie phy driver and imx8mm pcie support | expand

Checks

Context Check Description
robh/checkpatch success
robh/dt-meta-schema success
robh/dtbs-check fail build log

Commit Message

Richard Zhu Nov. 2, 2021, 2:32 a.m. UTC 
i.MX8MM PCIe has the PHY. Add a PHY phandle and name properties
in the binding document.

Signed-off-by: Richard Zhu <hongxing.zhu@nxp.com>
Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Reviewed-by: Tim Harvey <tharvey@gateworks.com>
Tested-by: Tim Harvey <tharvey@gateworks.com>
---
 Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.yaml | 6 ++++++
 1 file changed, 6 insertions(+)

Comments

Rob Herring (Arm) Nov. 2, 2021, 4:41 p.m. UTC | #1 
On Tue, 02 Nov 2021 10:32:30 +0800, Richard Zhu wrote:
> i.MX8MM PCIe has the PHY. Add a PHY phandle and name properties
> in the binding document.
> 
> Signed-off-by: Richard Zhu <hongxing.zhu@nxp.com>
> Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
> Reviewed-by: Tim Harvey <tharvey@gateworks.com>
> Tested-by: Tim Harvey <tharvey@gateworks.com>
> ---
>  Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.yaml | 6 ++++++
>  1 file changed, 6 insertions(+)
> 

Reviewed-by: Rob Herring <robh@kernel.org>
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.yaml b/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.yaml
index 2911e565b260..46b5446f5791 100644
--- a/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.yaml
+++ b/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.yaml
@@ -128,6 +128,12 @@  properties:
     enum: [1, 2, 3, 4]
     default: 1
 
+  phys:
+    maxItems: 1
+
+  phy-names:
+    const: pcie-phy
+
   reset-gpio:
     description: Should specify the GPIO for controlling the PCI bus device
       reset signal. It's not polarity aware and defaults to active-low reset