| Message ID | 1620036917-19040-1-git-send-email-u0084500@gmail.com |
|---|---|
| State | Changes Requested, archived |
| Headers | show |
| Series | [v1,1/2] regulator: rt6160: Add DT binding documet for Richtek RT6160 | expand |
| Context | Check | Description |
|---|---|---|
| robh/checkpatch | success | |
| robh/dt-meta-schema | success | |
| robh/dtbs-check | success |
On Mon, May 03, 2021 at 06:15:16PM +0800, cy_huang wrote: > From: ChiYuan Huang <cy_huang@richtek.com> Typo in the subject. > > Add the DT binding document for Richtek RT6160 voltage regulator. > > Signed-off-by: ChiYuan Huang <cy_huang@richtek.com> > --- > .../regulator/richtek,rt6160-regulator.yaml | 68 ++++++++++++++++++++++ > 1 file changed, 68 insertions(+) > create mode 100644 Documentation/devicetree/bindings/regulator/richtek,rt6160-regulator.yaml > > diff --git a/Documentation/devicetree/bindings/regulator/richtek,rt6160-regulator.yaml b/Documentation/devicetree/bindings/regulator/richtek,rt6160-regulator.yaml > new file mode 100644 > index 00000000..fe7b168 > --- /dev/null > +++ b/Documentation/devicetree/bindings/regulator/richtek,rt6160-regulator.yaml > @@ -0,0 +1,68 @@ > +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause > +%YAML 1.2 > +--- > +$id: http://devicetree.org/schemas/regulator/richtek,rt6160-regulator.yaml# > +$schema: http://devicetree.org/meta-schemas/core.yaml# > + > +title: Richtek RT6160 BuckBoost converter > + > +maintainers: > + - ChiYuan Huang <cy_huang@richtek.com> > + > +description: | > + The RT6160 is a high-efficiency buck-boost converter that can provide > + up to 3A output current from 2025mV to 5200mV. And it support the wide > + input voltage range from 2200mV to 5500mV. > + > + Datasheet is available at > + https://www.richtek.com/assets/product_file/RT6160A/DS6160A-00.pdf > + > +properties: > + compatible: > + enum: > + - richtek,rt6160 > + > + reg: > + maxItems: 1 > + > + enable-gpios: > + description: A connection of the 'enable' gpio line. > + maxItems: 1 > + > + richtek,vsel_active_low: > + description: | > + Used to indicate the 'vsel' pin active level. if not specified, use > + high active level as the default. > + type: boolean > + > +patternProperties: > + buckboost: foo-buckboost-bar is valid name? It's not a pattern, so move to 'properties'. > + description: BuckBoost converter regulator description. > + type: object > + $ref: regulator.yaml# > + > +required: > + - compatible > + - reg > + > +additionalProperties: false > + > +examples: > + - | > + i2c { > + #address-cells = <1>; > + #size-cells = <0>; > + > + rt6160@75 { > + compatible = "richtek,rt6160"; > + reg = <0x75>; > + enable-gpios = <&gpio26 2 0>; > + > + buckboost { > + regulator-name = "rt6160-buckboost"; > + regulator-min-microvolt = <2025000>; > + regulator-max-microvolt = <5200000>; > + regulator-allowed-modes = <0 1>; > + }; > + }; > + }; > -- > 2.7.4 >
HI, Rob Herring <robh@kernel.org> 於 2021年5月6日 週四 下午11:27寫道： > > On Mon, May 03, 2021 at 06:15:16PM +0800, cy_huang wrote: > > From: ChiYuan Huang <cy_huang@richtek.com> > > Typo in the subject. > Will be fixed in next. > > > > Add the DT binding document for Richtek RT6160 voltage regulator. > > > > Signed-off-by: ChiYuan Huang <cy_huang@richtek.com> > > --- > > .../regulator/richtek,rt6160-regulator.yaml | 68 ++++++++++++++++++++++ > > 1 file changed, 68 insertions(+) > > create mode 100644 Documentation/devicetree/bindings/regulator/richtek,rt6160-regulator.yaml > > > > diff --git a/Documentation/devicetree/bindings/regulator/richtek,rt6160-regulator.yaml b/Documentation/devicetree/bindings/regulator/richtek,rt6160-regulator.yaml > > new file mode 100644 > > index 00000000..fe7b168 > > --- /dev/null > > +++ b/Documentation/devicetree/bindings/regulator/richtek,rt6160-regulator.yaml > > @@ -0,0 +1,68 @@ > > +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause > > +%YAML 1.2 > > +--- > > +$id: http://devicetree.org/schemas/regulator/richtek,rt6160-regulator.yaml# > > +$schema: http://devicetree.org/meta-schemas/core.yaml# > > + > > +title: Richtek RT6160 BuckBoost converter > > + > > +maintainers: > > + - ChiYuan Huang <cy_huang@richtek.com> > > + > > +description: | > > + The RT6160 is a high-efficiency buck-boost converter that can provide > > + up to 3A output current from 2025mV to 5200mV. And it support the wide > > + input voltage range from 2200mV to 5500mV. > > + > > + Datasheet is available at > > + https://www.richtek.com/assets/product_file/RT6160A/DS6160A-00.pdf > > + > > +properties: > > + compatible: > > + enum: > > + - richtek,rt6160 > > + > > + reg: > > + maxItems: 1 > > + > > + enable-gpios: > > + description: A connection of the 'enable' gpio line. > > + maxItems: 1 > > + > > + richtek,vsel_active_low: > > + description: | > > + Used to indicate the 'vsel' pin active level. if not specified, use > > + high active level as the default. > > + type: boolean > > + > > +patternProperties: > > + buckboost: > > foo-buckboost-bar is valid name? > > It's not a pattern, so move to 'properties'. > Sorry, maybe I misunderstand the meaning of patternProperty. I'll move it into the properties, Thanks. > > + description: BuckBoost converter regulator description. > > + type: object > > + $ref: regulator.yaml# > > + > > +required: > > + - compatible > > + - reg > > + > > +additionalProperties: false > > + > > +examples: > > + - | > > + i2c { > > + #address-cells = <1>; > > + #size-cells = <0>; > > + > > + rt6160@75 { > > + compatible = "richtek,rt6160"; > > + reg = <0x75>; > > + enable-gpios = <&gpio26 2 0>; > > + > > + buckboost { > > + regulator-name = "rt6160-buckboost"; > > + regulator-min-microvolt = <2025000>; > > + regulator-max-microvolt = <5200000>; > > + regulator-allowed-modes = <0 1>; > > + }; > > + }; > > + }; > > -- > > 2.7.4 > >
diff --git a/Documentation/devicetree/bindings/regulator/richtek,rt6160-regulator.yaml b/Documentation/devicetree/bindings/regulator/richtek,rt6160-regulator.yaml new file mode 100644 index 00000000..fe7b168 --- /dev/null +++ b/Documentation/devicetree/bindings/regulator/richtek,rt6160-regulator.yaml @@ -0,0 +1,68 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/regulator/richtek,rt6160-regulator.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Richtek RT6160 BuckBoost converter + +maintainers: + - ChiYuan Huang <cy_huang@richtek.com> + +description: | + The RT6160 is a high-efficiency buck-boost converter that can provide + up to 3A output current from 2025mV to 5200mV. And it support the wide + input voltage range from 2200mV to 5500mV. + + Datasheet is available at + https://www.richtek.com/assets/product_file/RT6160A/DS6160A-00.pdf + +properties: + compatible: + enum: + - richtek,rt6160 + + reg: + maxItems: 1 + + enable-gpios: + description: A connection of the 'enable' gpio line. + maxItems: 1 + + richtek,vsel_active_low: + description: | + Used to indicate the 'vsel' pin active level. if not specified, use + high active level as the default. + type: boolean + +patternProperties: + buckboost: + description: BuckBoost converter regulator description. + type: object + $ref: regulator.yaml# + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + i2c { + #address-cells = <1>; + #size-cells = <0>; + + rt6160@75 { + compatible = "richtek,rt6160"; + reg = <0x75>; + enable-gpios = <&gpio26 2 0>; + + buckboost { + regulator-name = "rt6160-buckboost"; + regulator-min-microvolt = <2025000>; + regulator-max-microvolt = <5200000>; + regulator-allowed-modes = <0 1>; + }; + }; + };