From patchwork Thu Jun 18 11:33:32 2020 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Hanks Chen X-Patchwork-Id: 1312018 Return-Path: X-Original-To: incoming-dt@patchwork.ozlabs.org Delivered-To: patchwork-incoming-dt@bilbo.ozlabs.org Authentication-Results: ozlabs.org; spf=pass (sender SPF authorized) smtp.mailfrom=vger.kernel.org (client-ip=23.128.96.18; helo=vger.kernel.org; envelope-from=devicetree-owner@vger.kernel.org; receiver=) Authentication-Results: ozlabs.org; dmarc=pass (p=none dis=none) header.from=mediatek.com Authentication-Results: ozlabs.org; dkim=pass (1024-bit key; unprotected) header.d=mediatek.com header.i=@mediatek.com header.a=rsa-sha256 header.s=dk header.b=QSyKmhg4; dkim-atps=neutral Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by ozlabs.org (Postfix) with ESMTP id 49nfwv32v5z9sTM for ; Thu, 18 Jun 2020 21:34:39 +1000 (AEST) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1729569AbgFRLeh (ORCPT ); Thu, 18 Jun 2020 07:34:37 -0400 Received: from mailgw01.mediatek.com ([210.61.82.183]:51063 "EHLO mailgw01.mediatek.com" rhost-flags-OK-FAIL-OK-FAIL) by vger.kernel.org with ESMTP id S1729506AbgFRLeO (ORCPT ); Thu, 18 Jun 2020 07:34:14 -0400 X-UUID: 8f7a796946cc4843a9fb0c2a7297c535-20200618 DKIM-Signature: v=1; a=rsa-sha256; q=dns/txt; c=relaxed/relaxed; d=mediatek.com; s=dk; h=Content-Transfer-Encoding:Content-Type:MIME-Version:References:In-Reply-To:Message-ID:Date:Subject:CC:To:From; bh=YOyQ+xNoYb3LVTxsjHvGeSZpfP5WbSuesuRvHY3x/ss=; b=QSyKmhg4bn0fcCogFJ2e7S+UQoFJu+JZ5C6mUCkF0nVrDcsn8lCQZi4KqHD2aUWD3kqX8io654fogPGXPRbuNsYomtodJYcNw4rD8+I98nxBucL7BpHvvQypa/7MITcpLHCCAVopm7wbJY2rDNcDiYovxv4WMylqIW3yoIKF5cg=; X-UUID: 8f7a796946cc4843a9fb0c2a7297c535-20200618 Received: from mtkexhb02.mediatek.inc [(172.21.101.103)] by mailgw01.mediatek.com (envelope-from ) (Cellopoint E-mail Firewall v4.1.10 Build 0809 with TLS) with ESMTP id 773315099; Thu, 18 Jun 2020 19:34:05 +0800 Received: from mtkcas08.mediatek.inc (172.21.101.126) by mtkmbs01n2.mediatek.inc (172.21.101.79) with Microsoft SMTP Server (TLS) id 15.0.1497.2; Thu, 18 Jun 2020 19:34:01 +0800 Received: from mtkswgap22.mediatek.inc (172.21.77.33) by mtkcas08.mediatek.inc (172.21.101.73) with Microsoft SMTP Server id 15.0.1497.2 via Frontend Transport; Thu, 18 Jun 2020 19:34:01 +0800 From: Hanks Chen To: Linus Walleij , Rob Herring , Matthias Brugger , Michael Turquette , Stephen Boyd , Sean Wang CC: mtk01761 , Andy Teng , , , , , , , , CC Hwang , Loda Chou Subject: [PATCH v6 1/7] dt-bindings: pinctrl: add bindings for MediaTek MT6779 SoC Date: Thu, 18 Jun 2020 19:33:32 +0800 Message-ID: <1592480018-3340-2-git-send-email-hanks.chen@mediatek.com> X-Mailer: git-send-email 1.7.9.5 In-Reply-To: <1592480018-3340-1-git-send-email-hanks.chen@mediatek.com> References: <1592480018-3340-1-git-send-email-hanks.chen@mediatek.com> MIME-Version: 1.0 X-TM-SNTS-SMTP: 591640295288D394FECD5647B9F01693616AD9C0716C35C57EF74C52D2E77B222000:8 X-MTK: N Sender: devicetree-owner@vger.kernel.org Precedence: bulk List-ID: X-Mailing-List: devicetree@vger.kernel.org From: Andy Teng Add devicetree bindings for MediaTek MT6779 pinctrl driver. Signed-off-by: Andy Teng --- .../bindings/pinctrl/mediatek,mt6779-pinctrl.yaml | 210 ++++++++++++++++++++ 1 file changed, 210 insertions(+) create mode 100644 Documentation/devicetree/bindings/pinctrl/mediatek,mt6779-pinctrl.yaml diff --git a/Documentation/devicetree/bindings/pinctrl/mediatek,mt6779-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/mediatek,mt6779-pinctrl.yaml new file mode 100644 index 0000000..85819a4 --- /dev/null +++ b/Documentation/devicetree/bindings/pinctrl/mediatek,mt6779-pinctrl.yaml @@ -0,0 +1,210 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pinctrl/mediatek,mt6779-pinctrl.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Mediatek MT6779 Pin Controller Device Tree Bindings + +maintainers: + - Andy Teng + +description: |+ + The pin controller node should be the child of a syscon node with the + required property: + - compatible: "syscon" + +properties: + compatible: + const: mediatek,mt6779-pinctrl + + reg: + minItems: 9 + maxItems: 9 + description: | + physical address base for gpio-related control registers. + + reg-names: + description: | + GPIO base register names. The names are "gpio", "iocfg_rm", + "iocfg_br", "iocfg_lm", "iocfg_lb", "iocfg_rt", "iocfg_lt", + "iocfg_tl", "eint"; + + gpio-controller: true + + "#gpio-cells": + const: 2 + description: | + Number of cells in GPIO specifier. Since the generic GPIO + binding is used, the amount of cells must be specified as 2. See the below + mentioned gpio binding representation for description of particular cells. + + gpio-ranges: + minItems: 1 + maxItems: 5 + description: | + GPIO valid number range. + + interrupt-controller: true + + interrupts: + maxItems: 1 + description: | + Specifies the summary IRQ. + + "#interrupt-cells": + const: 2 + +required: + - compatible + - reg + - reg-names + - gpio-controller + - "#gpio-cells" + - gpio-ranges + - interrupt-controller + - interrupts + - "#interrupt-cells" + +patternProperties: + '-[0-9]*$': + type: object + patternProperties: + '-pins*$': + type: object + description: | + A pinctrl node should contain at least one subnodes representing the + pinctrl groups available on the machine. Each subnode will list the + pins it needs, and how they should be configured, with regard to muxer + configuration, pullups, drive strength, input enable/disable and input schmitt. + + properties: + pinmux: + description: + integer array, represents gpio pin number and mux setting. + Supported pin number and mux varies for different SoCs, and are defined + as macros in boot/dts/-pinfunc.h directly. + + bias-disable: + type: boolean + + bias-pull-up: + type: boolean + + bias-pull-down: + type: boolean + + input-enable: + type: boolean + + input-disable: + type: boolean + + output-low: + type: boolean + + output-high: + type: boolean + + input-schmitt-enable: + type: boolean + + input-schmitt-disable: + type: boolean + + mediatek,pull-up-adv: + description: | + Pull up setings for 2 pull resistors, R0 and R1. User can + configure those special pins. Valid arguments are described as below: + 0: (R1, R0) = (0, 0) which means R1 disabled and R0 disable. + 1: (R1, R0) = (0, 1) which means R1 disabled and R0 enabled. + 2: (R1, R0) = (1, 0) which means R1 enabled and R0 disabled. + 3: (R1, R0) = (1, 1) which means R1 enabled and R0 enabled. + allOf: + - $ref: /schemas/types.yaml#/definitions/uint32 + - enum: [0, 1, 2, 3] + + mediatek,pull-down-adv: + description: | + Pull down settings for 2 pull resistors, R0 and R1. User can + configure those special pins. Valid arguments are described as below: + 0: (R1, R0) = (0, 0) which means R1 disabled and R0 disable. + 1: (R1, R0) = (0, 1) which means R1 disabled and R0 enabled. + 2: (R1, R0) = (1, 0) which means R1 enabled and R0 disabled. + 3: (R1, R0) = (1, 1) which means R1 enabled and R0 enabled. + allOf: + - $ref: /schemas/types.yaml#/definitions/uint32 + - enum: [0, 1, 2, 3] + + drive-strength: + description: | + Selects the drive strength for the specified pins in mA. + allOf: + - $ref: /schemas/types.yaml#/definitions/uint32 + - enum: [2, 4, 6, 8, 10, 12, 14, 16] + + required: + - pinmux + + additionalProperties: false + +additionalProperties: false + +examples: + - | + #include + #include + #include + + pio: pinctrl@10005000 { + compatible = "mediatek,mt6779-pinctrl"; + reg = <0 0x10005000 0 0x1000>, + <0 0x11c20000 0 0x1000>, + <0 0x11d10000 0 0x1000>, + <0 0x11e20000 0 0x1000>, + <0 0x11e70000 0 0x1000>, + <0 0x11ea0000 0 0x1000>, + <0 0x11f20000 0 0x1000>, + <0 0x11f30000 0 0x1000>, + <0 0x1000b000 0 0x1000>; + reg-names = "gpio", "iocfg_rm", + "iocfg_br", "iocfg_lm", + "iocfg_lb", "iocfg_rt", + "iocfg_lt", "iocfg_tl", + "eint"; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&pio 0 0 210>; + interrupt-controller; + #interrupt-cells = <2>; + interrupts = ; + + mmc0_pins_default: mmc0-0 { + cmd-dat-pins { + pinmux = , + , + , + , + , + , + , + , + ; + input-enable; + mediatek,pull-up-adv = <1>; + }; + clk-pins { + pinmux = ; + mediatek,pull-down-adv = <2>; + }; + rst-pins { + pinmux = ; + mediatek,pull-up-adv = <0>; + }; + }; + }; + + mmc0 { + pinctrl-0 = <&mmc0_pins_default>; + pinctrl-names = "default"; + };